Individual Water Treatment Device for Reduction/Removal of Toxic Industrial Chemicals (TICs) and Toxic Industrial Materials (TIMs) from any indigenous fresh water sources
Archived on January 31, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EST
- Posted
- November 26, 2025
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- NAICS
- NAICS 54171 Research and Development in the Physical, Engineering, and Life Sciences (reported as 541710)
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG NATICK
- Place of performance
- Natick, Massachusetts, 01760
- Last updated
- Nov 5, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- IWTD_RFI_NOV2025
- Notice ID
- defb8ad217f94dfa959f6d79cb97126d
Description
Request for Information for Individual Water Treatment Device for Reduction/Removal of Toxic Industrial Chemicals (TICs) and Toxic Industrial Materials (TIMs) from any indigenous fresh water sources (RFI)
DESCRIPTION
Synopsis:
The US Army Combat Capabilities Development Command (DEVCOM) Solider Center, Natick, MA, is conducting a market investigation to identify products that meet Buy American Act requirements and/or suppliers of water treatment technologies for use at the individual Soldier Military Operations Microbiological Water Purifiers level with the capability or potential to meet military requirements for removal of Toxic Industrial Chemicals (TICs) and Toxic Industrial Materials (TIMs) from any indigenous fresh water sources for Soldier consumption.
The technologies shall be compatible with current and future organizational clothing and equipment such as the Individual Water Treatment Device (IWTD), the MOLLE Hydration System, standard military canteens, or both. They must be lightweight (not to exceed 12oz.), easy to use/clean/maintain, low bulk/compact, and capable of producing water purified from chemical contaminants throughout an operational life of at least 135 liters. They ideally have an unused service life of 180 days, are storage stable for 5 years and are environmentally safe during use and subsequent disposal. They shall not be impacted by low temperature exposure/freezing (-33 °C to 52 °C) and shall be fully functional on thawing, and be functional in basic, hot and cold environments.
The technologies must be capable of removing chemical contaminants to levels mandated by the Defense Health Agency: Defense Centers for Public Health – Aberdeen (DCPH-A). Relevant documents pertaining to multiservice field water regulations are US Army Technical Bulletin 577 (TB Med 577) and Technical Guideline 230 (TG 230). Ideally, this technology can meet or exceed microbiological mitigation requirements laid out in NSF Protocol P248: Military Operations Microbiological Water Purifiers. The water purification treat to drink time is ideally less than 20 minutes (desired time is less than 5 minutes) with a flow rate (if applicable) of not less than 200 mL/min. Batteries, if used, must be a commercially-available type and of weight and bulk compatible with the overall device requirements for weight and bulk. Processed water shall be palatable, with taste/flavor as in commercial bottled spring or municipal waters.
Due to the wide range of chemical contaminants that could potentially be found across the scope of global operations, the attached table contains a list of representative chemicals, their challenge concentrations, and their associated Military Exposure Guidelines (MEGs). The U.S. Army is interested in a) identifying firms with products, technologies, and capabilities to reduce the challenge concentrations of these TICs/TIMs to below their associated MEGs; b) identifying firms with products, technologies, and capabilities to specifically target reduction of the challenge concentrations of the inorganic materials found on the TIC/TIM list to below their associated Military Exposure Guidelines; and c) identifying firms with combinations of products, technologies, and capabilities to reduce the challenge concentrations of these TICs/TIMs to below their associated MEGs.
Please refer to the attachment “Toxic Industrial Chemical/Material Military Exposure Guideline”.
Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY
This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue a RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned.
Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject.
RESPONSES:
Interested parties may identify their interest and capability by sending responses with information on their current commercial product(s) and how they might address the Military requirement via e-mail ONLY to Eric Brack, eric.m.brack.civ@army.mil, Parker Brandwein, parker.d.brandwein.civ@army.mil and Blaise Liess, blaise.p.liess.civ@army.mil no later than 16 January 2026 by 5:00 p.m. EST. Interested sources shall include information regarding a firm's experience, personnel, and facilities. Information should include product cost, technical information (i.e., technical literature, test data and illustrations, photographs, patents), relevant company background/experience, and a sample (optional). Firms responding shall indicate whether or not they are a small business. Any information/samples submitted will not be returned. If a firm chooses to submit samples, no payment will be made by the Government for such samples. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party.
Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number.
QUESTIONS:
Any questions for clarification may be emailed to Eric Brack, eric.m.brack.civ@army.mil, Parker Brandwein, parker.d.brandwein.civ@army.mil and Blaise Liess, blaise.p.liess.civ@army.mil no later than 16 January 2026. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
Attachments/Links:
Toxic Industrial Chemical/Material Military Exposure Guideline - see attachment
NSF P248.02 - Military Operations Chemical Water Purifiers - see attachment
NSF P248 - Military Operations Microbiological Water Purifiers - see attachment
TB MED 577 - SANITARY CONTROL AND SURVEILLANCE OF FIELD WATER SUPPLIES
https://armypubs.army.mil/ProductMaps/PubForm/Details.aspx?PUB_ID=86297
TG230 - Environmental HRA and Chemical Military Exposure Guidelines (MEGs)
https://ph.health.mil/topics/envirohealth/hrasm/Pages/TG230.aspx
CONTACT INFORMATION
Contracting Office Address: NATICK DIVISION, 10 GENERAL GREENE AVE, NATICK, MA 01760-5011
Primary Point of Contact: Eric Brack, eric.m.brack.civ@army.mil
Secondary Point of Contact: Blaise Liess, blaise.p.liess.civ@army.mil
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (3)
Links (2)
- TG230 - Environmental HRA and Chemical Military Exposure Guidelines (MEGs)ph.health.milPosted
- TB MED 577 - SANITARY CONTROL AND SURVEILLANCE OF FIELD WATER SUPPLIESarmypubs.army.milPosted
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
Individual Water Treatment Device for Reduction/Removal of Toxic Industrial Chemicals (TICs) and Toxic Industrial Materials (TIMs) from any indigenous fresh water sources
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
In Cooperation with Product Manager Soldier Clothing and Individual Equipment (PdM SCIE) and the US Army Combat Capabilities Development Command (DEVCOM) Soldier Center SECTION 1 - Overview 1.1 Background and Introduction The U.S. Army Combat Capabilities Development Command (DEVCOM) Soldier Center is conducting a market investigation to identify products and technologies for individual Soldier water purification. This effort focuses on capabilities for the reduction or removal of Toxic Industrial Chemicals (TICs) and Toxic Industrial Materials (TIMs) from any indigenous fresh water sources. This Request for Information (RFI) seeks to identify suppliers of water treatment technologies that meet Buy American Act requirements and can be integrated with current and future equipment, such as the Individual Water Treatment Device (IWTD) and MOLLE Hydration System. Information gathered will be used for planning purposes to address military water purification needs. Respondents are encouraged to submit alternative technical approaches or product solutions that vary from the listed specifications, as long as they meet or exceed the core capability requirement. This is a Sources Sought Announcement for information and planning purposes only. It is not a Request for Proposal (RFP) and does not constitute a commitment by the U.S. Government. 1.2 Project Problem Statement The DEVCOM Soldier Center is interested in products and technologies that meet or have the potential to meet the following key performance parameters for individual water purification. Respondents should provide actual, demonstrated product performance for each parameter, including where performance does not meet specifications listed below: Contaminant Removal: Capable of removing TICs and TIMs to levels mandated by the Defense Health Agency (DCPH-A), as detailed in the attached "Toxic Industrial Chemical/Material Military Exposure Guideline." Compatibility: Compatible with standard military canteens and hydration systems. Physical Specifications: Weight: Not to exceed 12 oz. Size: Low bulk and compact. Operational Life: At least 135 liters. Shelf Life: 5-year storage stability with an 18-month unused service life. Environmental Resilience: System will not degrade in temperatures from -33°C to 52°C. Capable of treating water ranging in temperature from above freezing to 52°C (liquid water up to 52°C). Must not be impacted by freezing and remain functional upon thawing. Fully functional in all operational environments. Performance: Treat-to-Drink Time: Ideally less than 5 minutes (target less than 20 minutes). Flow Rate: Not less than 200 mL/min (if applicable). Water Quality: Processed water must be palatable, similar to commercial bottled water. Ease of use with or without gloved hands. Power: Batteries, if used, must be a commercially available type. Microbiological Mitigation: Ideally meets or exceeds requirements of NSF Protocol P248.01 (optional). SECTION 2 - RFI Procedures This RFI is issued to identify interested sources and gather information on market capabilities. Participation is voluntary, and the Government will not reimburse any costs associated with responding. Failure to respond does not preclude participation in any future solicitation. If a solicitation is released, it will be synopsized on SAM.gov. SECTION 3 - Instructions for Information Submissions 3.1 General Guidelines a. Unnecessarily elaborate brochures are not desired. b. Submissions must be sent electronically via email as instructed below. c. The Government will not pay for any information, administrative costs, or product samples submitted in response to this notice. All submissions become Government property and will not be returned. 3.2 Information Package Contents Interested parties are invited to submit responses detailing their products, technologies, and capabilities. The submission should include: A description of current commercial product(s) and how they can address the military requirements. Technical information (e.g., technical literature, test data, patents, illustrations). Information regarding the firm's experience, personnel, and facilities. Product cost information. Company information: business size (including socioeconomic status), CAGE code, and applicable NAICS code. GSA Federal Supply Schedule contract number, if applicable. A physical sample (optional; no payment will be made for unsolicited samples). Any relevant data on microbiological or chemical reductions. 3.3 Information Package Submission Responses shall be submitted via e-mail to the following points of contact (POCs): Eric Brack, eric.m.brack.civ@army.mil Parker Brandwein, parker.d.brandwein.civ@army.mil Blaise Liess, blaise.p.liess.civ@army.mil Ronda Hinnant, ronda.r.hinnant.civ@army.mil Responses must be submitted no later than 12 November 2026 by 5:00 p.m. EST. Responses received after this time may not be considered. The subject line shall read: “Response to IWTD TIC/TIM RFI, [Vendor’s Business Name]” SECTION 5 - Government Points of Contact Any questions for clarification may be emailed to the POCs listed below no later than 12 November 2026 by 5:00 p.m. EST. Verbal questions will not be accepted. Primary Point of Contact Eric Brack eric.m.brack.civ@army.mil Phone: 508-206-3968 Secondary Point of Contact Blaise Liess blaise.p.liess.civ@army.mil Phone: 703-223-1993 | 67% | Market Research | 11/12/2026 |
In Cooperation with Product Manager Soldier Clothing and Individual Equipment (PdM SCIE) SECTION 1 - Overview 1.1 Background and Introduction Product Manager Soldier Clothing and Individual Equipment (PdM SCIE) is seeking laboratories to validate the capabilities of Individual Water Treatment Devices (IWTDs). This initiative supports the Department of the Army’s goal of providing potable drinking water for Soldiers from any indigenous fresh water source, which enhances Soldier lethality by reducing load and increasing the duration of autonomous squad-level operations. The Army Contracting Command – Aberdeen Proving Ground (ACC-APG), on behalf of PdM SCIE, is issuing this Request for Information (RFI) to identify laboratories with the required certifications, equipment, and personnel to conduct this validation testing. The information gathered from this RFI will inform a future request for proposal. The Government reserves the right to cancel this opportunity or make no awards in conjunction with this opportunity. This is a Request for Information ONLY and not a request for proposal. 1.2 Project Problem Statement The objective of this effort is to validate the ability of Individual Water Treatment Devices (IWTD) to perform clearance of microbiological contaminants and Toxic Industrial Chemicals/Toxic Industrial Materials (TIC/TIMs). Testing must be conducted according to the military-specific purification standards outlined in National Sanitation Foundation (NSF) Protocols P248.01 and P248.02. The anticipated scope includes, but is not limited to, the following laboratory capabilities: Certification to ISO 17025:2017 or equivalent. Ability to evaluate devices against NSF P248.01 and/or P248.02 protocols. Capability to draft product-specific test plans in accordance with the P248 validation scheme. Commitment to provide all raw data, test data, and internal standard data. SECTION 2 - RFI Procedures This RFI is seeking information from qualified sources that can address the stated requirements. All responses to this announcement will be governed by the instructions herein. Interested parties are requested to submit information packages that present their planned approach to addressing the testing objectives. Packages should focus on the laboratory’s technical approach, capabilities, and relevant experience. SECTION 3 - Instructions for Information Submissions 3.1 General Guidelines a. Unnecessarily elaborate brochures are not desired. b. All submissions must be submitted electronically via the email instructions included herein. c. Submissions sent through other channels or after the response period has ended will not be reviewed or evaluated. d. The U.S. Government will not pay for any information or administrative cost incurred in response to this notice. All costs will be at the expense of the interested party. 3.2 Information Package Contents Interested parties shall include the following information in their response: A statement confirming if the laboratory is certified to ISO 17025:2017 or equivalent. A statement confirming if the laboratory is equipped to evaluate devices against NSF P248.01 and/or P248.02 protocols. If subletting work to another laboratory, provide name, credentials and last audit of that laboratory An estimated timeline for executing the validation testing, assuming an award in Nov/Dec 2026. Information regarding the firm's experience, personnel, and facilities. Supporting technical information (e.g., technical literature, test data, illustrations). Company background, business size (including socioeconomic status), CAGE code, and applicable NAICS code. GSA Federal Supply Schedule contract number, if applicable. 3.3 Information Package Submission Responses shall be submitted via e-mail to the following points of contact (POCs): Eric Brack, eric.m.brack.civ@army.mil Parker Brandwein, parker.d.brandwein.civ@army.mil Blaise Liess, blaise.p.liess.civ@army.mil Ronda Hinnant, ronda.r.hinnant.civ@army.mil Responses shall be submitted no later than 12 November 2026 by 5:00 p.m. EST. Responses received after this time and date may not be considered. The subject line for responses shall read: “Response to IWTD Laboratory Testing RFI, [Vendor’s Business Name]” SECTION 5 - Government Points of Contact Any questions for clarification regarding this opportunity may be emailed to the POCs listed below no later than 12 November 2026 by 5:00 p.m. EST. Verbal questions will not be accepted. Questions shall not contain proprietary or classified information. Primary Points of Contact Primary Point of Contact Eric Brack eric.m.brack.civ@army.mil Phone: 508-206-3968 Secondary Point of Contact Blaise Liess blaise.p.liess.civ@army.mil Phone: 703-223-1993 | 61% | Market Research | 11/12/2026 |
Water/Wastewater Treatment | 46% | Combined Synopsis | 09/01/2026 |
SYNOPSIS: This Sources Sought Announcement is to assist the US Army Combat Capabilities Development Command - Soldier Center (DEVCOM-SC) to identify potential sources to provide innovative product development research and/or consumer research and/or demonstration food samples in the area of alternative proteins. Responses are limited to Massachusetts based offerors as determined by CAGE code. The Government requests responders submit a Broad Agency Announcement BAA preproposal as outlined in DEVCOM-SC BAA W911QY-25-R-0023 located at: https://sam.gov/opp/a5ec94e2baee40df9951f864a8665e71/view Please refer to Section VI - Scientific and Technical Areas of Interest, A. Combat Ration Research and Development. Submit the BAA preproposal to: michael.s.wiederoder.civ@army.mil, richard.j.green.civ@army.mil and jean.m.trumpis.civ@army.mil by 23 November 2026, 5:00 PM EST. OBJECTIVE: DEVCOM-SC seeks product development, consumer research, and food sample demonstrations of current and emerging novel alternative protein technologies that could be integrated into military rations. BACKGROUND: The U.S. Army Combat Capabilities Development Command Soldier Center (DEVCOM-SC), Combat Feeding Division (CFD), is seeking information from industry and academia on capabilities related to alternative proteins. The U.S. Army is exploring how the emerging alternative-protein sector can help meet several objectives, including enhancing food supply chain resilience, enabling biomanufacturing of foodstuffs in combat-forward environments, and providing tailored, high-quality nutrition to the Warfighter. DEVCOM-SC CFD has unique expertise in the development and assessment of shelf-stable ration components, as well as food safety and palatability for the Joint Warfighter. We are looking to partner with the commercial and academic sectors to advance technology development in this area. AREAS OF INTEREST: DEVCOM-SC is seeking information from offerors that can provide capabilities in one or more of the following areas. Work proposed should be to advance technology between TRL 4 and 6. Please note, for the purposes of this Sources Sought, we are specifically excluding solutions related to cell-cultured, lab-grown meat or insect protein. Innovative technologies for alternative protein development to reduce Soldier load: Seeking advanced technologies and processes involved in fermentation, precision fermentation, or other novel biomanufacturing methods, that enhance the production of alternative proteins where additional funding in specific components of the research would significantly accelerate advancements in technology between TRL 4 and 6, enabling faster transition to operational use. These technologies should focus on creating lightweight and nutrient-dense ration solutions to reduce logistical burdens and physical load on warfighters while maintaining or enhancing nutritional value and operational performance. Innovative Product Development: The development of innovative meat-alternative products specifically designed for inclusion in military rations, meeting stringent requirements for nutrition, shelf stability, and palatability. Consumer Research and Acceptability: The ability to conduct comprehensive consumer research (e.g., focus groups, sensory panels, field testing) to enhance the acceptability and consumption of alternative proteins within a military population. Food Sample Demonstration: An optional addition to the effort would be to provide 100 food samples of a potential product that has Generally Recognized as Safe (GRAS) status with an FDA no-questions letter to demonstrate the maturation of an alternative protein manufacturing technology. These samples would be provided to the Government for sensory acceptability and other performance characteristics and will be consumed by our test panel of experts. SUBMISSION REQUIREMENTS: Interested parties (companies or academic institutions) are requested to submit a proposal that details their capabilities in one or more of the areas listed in Section 3.0. Submissions should include: A detailed description of your technical approach. Relevant past performance or corporate experience. A rough order of magnitude (ROM) cost estimate for the proposed work or samples. This information will be used for market research and planning purposes. Responses to this Sources Sought are not binding proposals, but they will help shape future solicitation requirements. Offerors are welcome to send samples at their own cost for evaluation. DEVCOM SC will not return any items, nor is DEVCOM SC obligated to share any data from evaluation. Sending samples is not required for consideration for funding. Samples must be GRAS with an FDA no-questions letter. Please coordinate by e-mail (richard.j.green.civ@army.mil) before sending samples. Address information will be provided at that time. SOUGHT ANNOUNCEMENT ONLY. This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending BAA preproposals regarding this requirement to DEVCOM-SC via e-mail ONLY to michael.s.wiederoder.civ@army.mil, richard.j.green.civ@army.mil and jean.m.trumpis.civ@army.mil by 23 November 2026, 5:00 PM EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Submissions should include: Whether you are proposing product development and/or consumer research and/or sample demonstration. A detailed description of your technical approach. Relevant past performance or corporate experience. A rough order of magnitude (ROM) cost estimate for the proposed work or samples. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. QUESTIONS: Any questions for clarification may be emailed to michael.s.wiederoder.civ@army.mil, richard.j.green.civ@army.mil and jean.m.trumpis.civ@army.mil no later than 18 November 2026, 5:00 PM EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement. | 42% | Market Research | 11/23/2026 |
This Broad Agency Announcement (BAA) covers the following areas of scientific and technical areas of expertise: A. COMBAT FEEDING COMBAT FEEDING EQUIPMENT AND SYSTEMS COMBAT RATION RESEARCH AND DEVELOPMENT B. SOLDIER PROTECTION AND SURVIVABILITY WARFIGHTER SYSTEMS TECHNOLOGIES 1. Integrated Protective Headborne Equipment and Injury Diagnostic/Assessment Tools. 2. Modular Personal Protection Equipment (MPPE) and Injury Diagnostic/Assessment Tools. 3. Chemical/Biological Protection for Individuals. 4. Countersurveillance. 5. Body Worn Interactive Materials. 6. Materials Nanotechnology. 7. Advanced Protection, Integration Technologies/Systems and Assessment Methods. 8. Integrated Sound, Light and Blast Management for the Ears and Eyes. B. TEXTILE TECHNOLOGIES 1. Multi-Functional Materials. C. MODELING AND SIMULATION 1. Individual Ground Soldier and Small Unit Operational Effectiveness and Survivability. D. SOLDIER EFFECTIVNESS 1. Body-Worn Systems, Hand-Held Devices, Smart-Lightweight Electronic Components, and Information processing to Increase Soldier Maneuverability and Protection through on-Soldier Sensing, Remote Sensing, and Knowledge Management 2. Biomechanics 3. Anthropometry 4. Warrior Performance 5. Soldier Power Sources, Power & Data Distribution and Management 6. Future Warrior Technology Integration. 7. Technology Assessment and Simulation Tools. 8. Ecological Approach to Warfighter Survivability; Perception-Action-Cognition 9. Soldier Centric Sensors, Information Portrayal, & Data Management Technologies. 10. Soldier/Squad Performance Optimization. 11. Human Factors 12. Soldier Intelligence, Surveillance, and Reconnaissance (ISR) 13. Biotechnology 14. Physical Performance Technologies E. EXPEDITIONARY MANEUVER SUPPORT Research and Development. Electromagnetic Interference/Electromagnetic Pulse (EMI/EMP) Protection Environmental Protection and Energy Efficiency Maneuver and Movement/Sustainment: Deployment/Durability Functional Integration of Multiple Technologies Miscellaneous F. AERIAL DELIVERY ADVANCED PERSONNEL AND CARGO AIRDROP SYSTEMS G. SIMULATION AND TRAINING TECHNOLOGY Live Training Simulation and Battlefield Effects: Medical Simulation and Training Advanced Interactive Simulation Cyberspace Warfare for Training (CyWar-T) Adaptive Instructional Systems Battlespace Visualization and Interaction Digital Environments and Battlespace Creation Artificially Intelligent Agents Collaboration with the Institute for Creative Technologies | 40% | Solicitation | 02/27/2030 |
Additional Details
Solicitation Number
IWTD_RFI_NOV2025
Archive Date
Jan 31, 2026
Office Address
NATICK, MA, 01760-5011