Notice ID: 463cb3e9f102266bdae3c50d782fe45fCombined Synopsis/Solicitation
12--150 gallon Fire Slip-On Skidload
Archived on September 30, 2010. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 7:00 AM UTC+02:00
- Posted
- September 9, 2010
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 423850: Service Establishment Equipment and Supplies Merchant Wholesalers
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- COMMANDER
- PSC
- 12: FIRE CONTROL EQPT.
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- M0026410T0311
- Notice ID
- 463cb3e9f102266bdae3c50d782fe45f
Description
SEE ATTACHED SOLICITATION. Skid Load: Maximum Total Size: 48 inches wide by 95 inches long Note: Components on skid are to be arranged to allow room for someone to step up onto the tank for easy access to the hose reel without having to step on or over the extended plumbing. Hose reel, power unit and pump, and control panel should all be mounted on the same side of the unit. Also, arrangement of the hose reel and fill tower should allow for about a 24 inch wide space for someone to sit on top of the water tank with their feet able to rest on a diamond plate covering. This covering will be sturdy enough to stand on and will cover the hoses and valves between the tank and pump. The covering will extend to the rear of the skid. This diamond plate cover will have sides a minimum of 8 inches tall also made of diamond plate to provide space to store tools and equipment. No battery will be required. Heavy duty wiring will be provided to allow the purchaser to run the wiring from skidload power unit to vehicle battery. The wiring provided will be 25 foot in length. All attempts will be made to keep the unit and accessories as compact as possible. This will allow us space to carry all other necessary tools needed for wildland firefighting. Unit will include the following: Pump and Power unit: 20HP Honda engine with centrifugal 2 inch suction x 1.5 inch discharge pump with performance capabilities of up to 119 gpm and pressures up to 330 psi. Will include: -Manual and electric start -Low oil shut down -Maintenance free drive assembly -Oil drain line (Ez-drain) -3 gallon fuel tank -USFS approved spark arrestor Tank: 150 Gallon Gator Poly tank with removable top. Furnished with bottom mount tabs. Constructed of in. UV-stabilized black poly. Glossy finish. Will include: - Stainless Flanges - 4 Sight gauge on water - 1/2 UV-Stabilized black poly - Baffled to NFPA specs. - 8 x 8 water fill tower w/latch - .5 full-poly top mounting pad - Reinforced poly corners covers for extended strength Plumbing: -Tank Fill - 1.5 inch Direct Hydrant Fill (NSTF) -Two Suctions: - 2 inch tank to pump - 2 inch overboard to draft suction -Two Discharges: - 1.5 inch overboard discharge outlet - 1 inch pump to reel live line -Pump to Tank Fill: - 1 inch to tank from pump (by-pass) -All valving to be full port brass ball valves -All hard plumbing to be stainless steel -All control valves to be accessed from rear of unit. -Flex hose installed between pump and plumbing to allow for quick pump end removal. -All flex hose to be internally expanded style couplings. (No bands) Control Panel: Medium control panel specifications: -Aluminum panel -Flush mount liquid filled pressure gauge 0-600 psi -Low-pressure cut-off system w/manual override -Panel mount primer control valve -Night operation light -Electric reel button -On/Off Start controls -Choke and Throttle controls -50 amp reel circuit breaker -Electric prime button Reel: Reel Features: -Hannay Superbooster electric live reel model# SBEPF 28-25-26 -Low profile outlet riser 1 male N.P.T. thread -Full flow brass swivel joint -SBEPF 28-25-26 model holds up to 200 ft. of 1 booster hose -200 ft. of 3/4 red rubber booster hose installed on reel Skid: -Skid dimension: 48 x 95-all aluminum skid with diamond plate plumbing deck. Any deviation from these models and specifications will need Quantico Fire Department approval before the award of the contract. Tank: 150 Gallon Gator Poly tank with removable top. Furnished with bottom mount tabs. Constructed of in. UV-stabilized black poly. Glossy finish. Will include: - Stainless Flanges - 4 Sight gauge on water - 1/2 UV-Stabilized black poly - Baffled to NFPA specs. - 8 x 8 water fill tower w/latch - .5 full-poly top mounting pad - Reinforced poly corners covers for extended strength Plumbing: -Tank Fill - 1.5 inch Direct Hydrant Fill (NSTF) -Two Suctions: - 2 inch tank to pump - 2 inch overboard to draft suction -Two Discharges: - 1.5 inch overboard discharge outlet - 1 inch pump to reel live line -Pump to Tank Fill: - 1 inch to tank from pump (by-pass) -All valving to be full port brass ball valves -All hard plumbing to be stainless steel -All control valves to be accessed from rear of unit. -Flex hose installed between pump and plumbing to allow for quick pump end removal. -All flex hose to be internally expanded style couplings. (No bands) Control Panel: Medium control panel specifications: -Aluminum panel -Flush mount liquid filled pressure gauge 0-600 psi -Low-pressure cut-off system w/manual override -Panel mount primer control valve -Night operation light -Electric reel button -On/Off Start controls -Choke and Throttle controls -50 amp reel circuit breaker -Electric prime button Reel: -Hannay Superbooster electric live reel model# SBEPF 28-25-26 -Low profile outlet riser 1 male N.P.T. thread -Full flow brass swivel joint -SBEPF 28-25-26 model holds up to 200 ft. of 1 booster hose -200 ft. of 3/4 red rubber booster hose installed on reel Skid: -Skid dimension: 48 x 95-all aluminum skid with diamond plate plumbing deck.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Pamela Stevenson 703-784-3493 150 gallon Fire Slip-On Skidload
Documents
No documents available.
Lifecycle
Solicitation:
M0026410T0311- Combined Synopsis
- 2×Combined SynopsisCurrentSep 9, 2010
12--150 gallon Fire Slip-On Skidload
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
NOTICE TO OFFERORS SUBMISSION OF QUOTES: Quotes may be submitted via email (no larger than 2MB) to nathan.p.burns.mil@usmc.mil (PREFERRED METHOD) or via hand delivery/courier to Contracting Department, Bldg. 316, “G” Street, Camp Lejeune, NC 28542. It is solely the Offeror’s responsbility to ensure quotes are submitted in accordance with FAR provision 52.212-1 including its addenda, and received within the required timeframe. All quotes, if timely received, will be considered for award. The information submitted shall be clear and legible. | 48% | Solicitation | 11/18/2027 |
Proposed procurement for NSN 4210013943951 NOZZLE,FIRE EQUIPMENT: Line 0001 Qty 57 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0090 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically. | 35% | Combined Synopsis | 11/23/2026 |
Car fire simulator for emergency services to use for training purposes at Quantico Marine Corps Base. Solicitation was issued as a small business set aside, brand name or equal. | 65% | Awarded | Open |
63% | Awarded | Open | |
No Description Provided | 63% | Other | Open |
Additional Details
Solicitation Number
M0026410T0311
Archive Date
Sep 30, 2010