Notice ID: 85c5186af292588c3d78eb3781e10ed9Solicitation
46--PERMANENT BOOM
Archived on October 14, 2016. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 7:00 AM UTC+02:00
- Posted
- September 8, 2016
- Notice type
- Solicitation
- NAICS
- 326199: All Other Plastics Product Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- COMMANDING OFFICER
- PSC
- 46: WATER PURIFICATION/SEWAGE TREATMENT
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- M6261316T0100
- Notice ID
- 85c5186af292588c3d78eb3781e10ed9
Description
Presolicitation Notice Solicitation M62613-16-T-0100 The purpose of this notice is to inform all parties that the United States Marine Corps Contracting Office, Marine Corps Air Station, Iwakuni (MCASI), Japan, intends to purchase below listed requirements. Requirement: Permanent Boom with Tow Bridle. Delivery to: Marine Corp Air Station Iwakuni JAPAN This procurement is not a small business set-aside; any responsible source may submit an offer. The North American Industry Classification System (NAICS) for this procurement is 326199 and Federal Supply Class (FSC) of 2040. Point of Contact for all matters pertaining to this special notice is: Hidetoshi Matsumae, Contract Specialist, e-mail: hidetoshi.matsuma.ja@usmc.mil This is an electronic solicitation in PDF format. The solicitation may be downloaded by visiting the electronic solicitation website at the following internet address (URL): https://www.fbo.gov/ . If this solicitation is not posted at this website o/a 09 Sep 2016, you may request e-mail notification of the date it is uploaded. Send your request by e-mail to the POC. All responsible sources may submit quotes which will be considered by the agency. Agency Office Address and POC: Office Address: Marine Corps Air Station Iwakuni, Japan Logistics Dept., Contracting Div. PSC 561 Box 1872, FPO AP 96310-0019 Japanese Address: Yamaguchi-ken Iwakuni-shi Misumi-cho 2-chome Kanyuchi 740-0025, Japan
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Hidetoshi Matsumae 315-253-6859
Documents
No documents available.
Lifecycle
Solicitation:
M6261316T0100- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.2 (Overhaul), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This enclosure is an addendum to FAR provision 52.212-1, Instructions to Offerors ? Commercial Products and Commercial Services, which applies to this acquisition. Competitive quotes are being requested under Request for Quote (RFQ) Number N66001-26-Q-6113. The North American Industry Classification System (NAICS) code applicable to this acquisition is 326199, All Other Plastics Product Manufacturing and the small business size standard is 750 employees. This procurement is Full and Open Competition.NOTE: This order has a DPAS rating of DX-C9.The Government is seeking to acquire Custom Buoys . To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed in C1.5 ATTACHMENT (00) RFQ . The Government will not consider quotes or offers for partial items or quantities. The exact specifications are provided on NIWC Pacific drawing SK744-2307 (See C1.5 ATTACHMENT (01) NIWC DRAWING)The expected delivery date is 30 June 2026. The Government is seeking Free on Board (FOB) Destination pricing to the following shipping address: San Diego, CA 92110 (full address will be disclosed at award). | - | Combined Synopsis | 04/28/2026 |
NOTICE OF INTENT TO AWARD SOLE SOURCE, NOT A REQUEST FOR QUOTES A RFQ WILL NOT BE ISSUED In accordance with FAR 6.201-1 the Naval Air Warfare Center Weapons Division at China Lake, CA intends to award a firm fixed price contract on a sole source basis for the following items: Mandrel Set part numbers 12934-80139701 and 12934-80139702 This requirement is sole sourced Advanced Ceramics Manufacturing is the only source that can provide mandrels that can be replaced with every part, is non-toxic, can withstand elevated temperatures and compatible with existing equipment THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES: no solicitation or RFQ will be forth coming. However, interested parties may identify their interest and capability to respond to this requirement no later than 4/6/26 by 4:00 PM PST. The written response shall reference solicitation number N68936-26-SIMACQ-D555000-0016 and must provide a clear and concise capability statement to show the ability to perform the required work without compromising the quality, accuracy, reliability and schedule. Written responses to this notice must be submitted to Virginia Dennison at email: virginia.j.dennison.civ@us.navy.mil All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/. Going forward, all new entities registering in GSA's System for Award Management (SAM), as well as existing registrations being updated or renewed, will require the submission of an original, signed notarized letter identifying the authorized Entity Administrator for the entity associated with the Data Universal Numbering System (DUNS) number. Effective June 11, 2018, entities who create or update their registration in SAM.gov to apply only for federal assistance opportunities such as grants, loans, and other financial assistance programs, have a notarized letter on file within 30 days of registration. Additionally, Effective June 29, 2018, all non-Federal entities who create or update their registration in SAM.gov, have a notarized letter on file within 30 days of registration. It is recommended that all interested parties be aware that processing this additional information may take several days and are proactive in maintaining the SAM registrations in an "Active" status as the government cannot award to an entity without an "Active" SAM registration. More information can be found at www.gsa.gov/samupdate. | - | Pre-Solicitation | 04/06/2026 |
The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for a centrifugally cast fiberglass-reinforced polymer mortar (CCFRPM) pipe that has the equal performance and listing/approval requirements as the HOBAS pipe (CCFRPM pipe), manufactured by HOBAS Pipe USA, Inc., 1413 E. Richey Road, Houston, Texas 77073-3508. The alternate product/service must meet the following requirements and specifications: Centrifugally cast fiberglass-reinforced polymer (CCFRPM) pipe, manufactured and tested in accordance with ASTM D3262. Pipe sizes shall be 24-inch (DN 600, 25.8-inch OD) and 42-inch (DN 1050, 45.9-inch OD) nominal diameters. Manufactured by the centrifugal casting process to result in a dense, uniform, non-porous, corrosion-resistant, consistent composite structure. Interior surface of the pipe exposed to untreated sewer flow must provide crack and abrasion resistance. Exterior surface of the pipe must be comprised of a sand and resin layer that provides ultraviolet (UV) protection to the pipe exterior. Pipes must be Type 1, Liner 2, Grade 3 per ASTM D3262. Coupling joints must meet the requirements of ASTM D4161. Minimum pipe normal stiffness (SN) when tested in accordance with ASTM D2412 must be 46 pound per square inch (PSI). Resin System: Manufacturer must use only polyester resin systems with proven history of performance in this application. Historical data must be acquired from a composite material or similar construction and composition as the proposed product. Glass Reinforcement: The reinforcing glass fibers used to manufacture the components must be of the highest quality commercial grade E-glass filaments with binder and sizing compatible with impregnating resins. Silica Sand: Sand must be minimum 98% silica with a maximum moisture content of 0.2%. Additives: Resin additives, such as curing agents, pigments, dyes, fillers, and thixotropic agents, etc., when used, must not detrimentally affect the performance of the product. Elastomeric Gaskets: Gaskets must meet ASTM F477 and be suitable for the intended service. This notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes, or invitation of bids or award a contract. Interested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system. Technical response shall be typed, at least 11 point Times New Roman or larger, single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format. Also, provide company information and point of contract (name, title, email, phone, mailing address). The Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement. Any information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit your company brochure. Interested parties shall submit information and specifications to Ms. Isabella Chong-Navarre, Contract Specialist via email at isabella.a.chong-navarre.civ@us.navy.mil and Ms. Jessica Shimoda, Contract Specialist via email at Jessica.a.shimoda.civ@us.navy.mil. Interested parties responding to this announcement by 17, November 2026 at 10:00 A.M. Hawaii Standard Time will be considered. | - | Market Research | 11/17/2026 |
The U.S. Army Corps of Engineers, Rock Island District has a requirement for the fabrication and supply of ten Fiber Reinforced Polymer (FRP) composite structures for Brandon Road Lock and Dam, Joliet, Illinois, Des Plaines River. The gates include (2) 14 X 14 ft filling valves, (2) 14 X 14 ft filling downstream bulkheads, (2) 8 X 8 ft flushing valves, (2) 8 X 8 ft flushing valve bulkheads, and (2) 16 X 16 ft dam headgates. NAICS Code: 326199 Size Standard: 750 employees 100% Small Business Set-Aside - Lowest Price Technically Acceptable A pre-proposal meeting will be held virtually via Microsoft Teams on 29 October 2026, at 2:00 PM CT. Details and access instructions can be found within the solicitation. Questions regarding this solicitation shall be submitted via ProjNet by 2:00 PM CT on 16 November 2026. See MVR.02 in the solicitation for additional information. All solicitation documents are accessible via the link below titled "PIEE Solicitation Module Link for W912EK27RA001." *Pre-proposal Meeting Slides are now included for reference in the Attachments section below. | - | Solicitation | 11/30/2026 |
Proposed procurement for NSN 2541016449257 BASKET,ACCESSORIES STO: Line 0001 Qty 7 UI EA Deliver To: DLA DISTRIBUTION RED RIVER By: 0315 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION RED RIVER By: 0060 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/19/2026 |
Additional Details
Solicitation Number
M6261316T0100
Archive Date
Oct 14, 2016