GovChime
Notice ID: 2c61a26be7d09f9ad25cc5100afb45ceAward NoticeAwarded

NOTICE OF INTENT TO SOLE SOURCE - On-Site Evaluation and Optional Repair of SIP Hause Jig Grinder

Awarded on April 25, 2019. Full description on SAM.gov.

Awarded tounder M6700119P1091 (source: SAM.gov award notice)• $42.8K

Overview

Posted
April 26, 2019
Notice type
Award Notice
NAICS
811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Agency
Department of WarDepartment of the Navy

Notice details

Office
COMMANDING OFFICER
Place of performance
Fleet Readiness Center East, Cherry Point, NC, 28533
PSC
J: MAINT, REPAIR, REBUILD EQUIPMENT
Last updated
Dec 4, 2025
Award date
Apr 25, 2019
Award amount (SAM.gov award notice)
$42.8K

Identifiers

Solicitation number
M6700119Q1089
Notice ID
2c61a26be7d09f9ad25cc5100afb45ce
Award number (PIID)
M6700119P1091

Description

The Cherry Point Satellite Contracting Office, Marine Corps Air Station (MCAS), Cherry Point, NC 28533 hereby gives notice of their intent to award a purchase order to Hardinge, Inc., 1 Hardinge Dr, Elmira, NY, 14902-1946 (Cage Code: 1EEW7) on a sole source basis in accordance with the Federal Acquisition Regulation (FAR) Subpart 13.106-1(b)(I), only one source reasonably available and no other supplies or services will satisfy agency requirements. The Fleet Readiness Center (FRC) East, MCAS Cherry Point, NC has an urgent requirement for on-site evaluation and optional repair services for a SIP Hause Jig Grinder located aboard MCAS Cherry Point, NC. Market research has revealed this contractor is the only authorized vendor capable of providing the required services. Therefore, the government intends to procure these services on a sole source basis from Hardinge, Inc., the original equipment manufacturer (OEM) of the machine. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES. However, all responsible sources may submit a capability statement, which, if received within three (3) calendar days after the date of the publication of this synopsis, will be considered. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this requirement based upon responses received as a result of this notice is solely within the discretion of the Government. Point of contact for this requirement is Marie Strausbaugh, 252-466-3417, marie.strausbaugh@usmc.mil .

Full description on SAM.gov

Award Overview

Award Number

M6700119P1091

Award Amount (SAM.gov award notice)

$42.8K

Award Date

Apr 25, 2019

Awardee

Awardee UEI

RBGEE11EGCL8

Original Solicitation

Notice ID: 2c61a26be7d09f9ad25cc5100afb45ce

Posted Date: Apr 26, 2019

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

4
  • N6852023D0002
    HARDINGE INC
    Department of DefenseNAICS 811310
    —Signed Jul 8, 2026
  • N0001924F1027
    HARDINGE INC
    Department of DefenseNAICS 811310
    $67.4KSigned Jun 16, 2025
  • W912NW24P0023
    HARDINGE INC
    Department of DefenseNAICS 811310
    $11.5KSigned Jun 16, 2025
  • N0001924F1027
    HARDINGE INC
    Department of DefenseNAICS 811310
    $67.4KSigned May 21, 2025

Contacts

Documents

No documents available.

Lifecycle

Solicitation:M6700119Q1089
  1. Awarded

This opportunity has been awarded.

  1. Special NoticeMar 5, 2019

    NOTICE OF INTENT TO SOLE SOURCE - On-Site Evaluation and Optional Repair of SIP Hause Jig Grinder

    Notice e237462a76524248b75e43c36750e4b9 on SAM.gov

  2. AwardedCurrentApr 26, 2019

    NOTICE OF INTENT TO SOLE SOURCE - On-Site Evaluation and Optional Repair of SIP Hause Jig Grinder

    Notice 2c61a26be7d09f9ad25cc5100afb45ce on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Commander Fleet Readiness Center (COMFRC) hereby gives notice of their intent to award a purchase order to Campbell Grinder Co., 1226 E. Pontaluna Rd, Spring Lake, MI 49456 (Cage Code: 18278) on a sole source basis. In accordance with the Federal Acquisition Regulation (FAR) 13.106-1(b)(2), only one source is reasonably available, and no other supplies or services will satisfy agency requirements. FRC South West, NAS North Island has a requirement for necessary supplies and services to perform annual preventative maintenance (PM), evaluation, and repair for three (3) Government owned Campbell VTG Computer Numeric Control (CNC) grinding machines located at the Fleet Readiness Center Southwest (FRCSW). Campbell Grinder Co. does not authorize third-party field technicians and handles all maintenance, parts, and repairs entirely in-house. They deploy their own certified Local and Regional Service Technicians with proprietary knowledge directly to facilities for on-site PM, alignments, diagnostics, and repairs. Any government requirement for certified OEM maintenance or proprietary parts installation typically establishes a strong justification for a Sole Source Determination under FAR Part 13.5 or FAR 6.302-1 (Only One Responsible Source). For this reason, the Government intends to procure this PM, evaluation, and repair on a sole source basis from Campbell Grinder Co. (Cage: 18278). THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES. However, all responsible sources may submit a capability statement, which, if received within three (3) calendar days after the date of the publication of this synopsis, will be considered. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement without impacting the requirement. A determination by the Government not to compete this requirement based upon responses received as a result of this notice is solely within the discretion of the Government. The point of contact for this requirement is kelsey.l.herbert2.civ@us.navy.mil
75%
Special Notice11/17/2026
SPECIAL NOTICE / PRE-SOLICITATION NOTICE OF INTENT TO SOLE SOURCE Revolutionary FAR Overhaul (RFO) Commercial Acquisition (Below SAT) 1. SPECIAL NOTICE INFORMATION: This is a special notice prepared in accordance with the Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) Subpart 5.1 (Pre-solicitation Notice for Commercial Simplified Acquisition) and RFO FAR 12.201-1(c)(2). 2. CONTRACTING OFFICE & AGENCY: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility (PHNSY & IMF) PHNSY & IMF, C414 667 Safeguard St. Suite 100 JBPHH, HI 96860 3. SUBJECT & INTENT TO AWARD: In accordance with RFO FAR 12.201-1(c)(2), the Government may solicit quotations directly from suppliers for this acquisition at or below the Simplified Acquisition Threshold (SAT). The Government intends to award a sole-source, firm-fixed-price (FFP) purchase order using Simplified Acquisition Procedures (SAP) to: Vendor Name: Danobat, Inc. Vendor Address: 1914 S Houston Ave Humble, TX 77396-1507 4. DESCRIPTION & WHY COMPETITION IS LACKING: The government requires a contractor to provide a Manufacturer Trained Certified Technician to perform annual, on-site preventive maintenance, repair, calibration, and remedial services, and include an inspection report for one (1) Danobat Sperical Grinder Model BGM-600 / Serial Number 600231 for a base and four option years. This requirement will be solicited under NAICS code 811310. Under RFO FAR 12.102(a), the Contracting Officer has determined that only one source is reasonably available to fulfill this requirement because Danobat, Inc. is the Original Equipment Manufacturer (OEM) and holds proprietary hardware and software necessary to service the Danobat Spherical Grinder. 5. SUBMISSION OF CAPABILITY STATEMENTS: This announcement constitutes the only notice of intent. This is NOT a request for competitive proposals or quotes, and no solicitation document exists. However, all responsible sources who believe they can meet the exact requirements specified above may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Any capability statement must include sufficient technical, management, and cost data to demonstrate the vendor's ability to fulfill the exact requirement. Submission must not exceed 5 pages and must be submitted electronically to the Point of Contact listed below. 6. DEADLINE & POINT OF CONTACT: Responses must be received no later than 24 November 2026 at 1200 PM Hawaii Standard Time (HST) via email. Points of Contact: Luke Dahlquist – Contract Specialist luke.r.dahlquist.civ@us.navy.mil Evangeline Calaustro – Contracting Officer evangeline.b.calaustro.civ@us.navy.mil A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement.
68%
Pre-Solicitation11/24/2026
This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR 12.6 Streamlined Procedures for Evaluation and Solicitation of Commercial Items. This announcement constitutes the only solicitation; quotes are requested. COMMANDER, FLEET READINESS CENTERS (COMFRC), has a requirement for Cryogenic Maintenance and Repair Services under FAR Part 13 Simplified Acquisition Procedures. The anticipated award will be a firm-fixed-price contract for inspection and maintenance of cryogenic tanks, and emergency visits for evaluation and repair. The anticipated period of performance is 14-JAN-2026 to 13-JAN-2029, a base year and two (2) option years. SET ASIDE: None, this procurement is unrestricted. SOLICITATION CLOSING DATE: To be eligible for award, quotes must be received by the “Date Offers Due” posted in the General Information section of this notice. Preferred delivery method for submission of your quote is email to the Primary Point of Contact posted to the Contact Information section of this notice. Government ANTICIPATES AWARD: of Firm-Fixed Price (FFP) Purchase Order by 15-JAN-2026. ATTACHMENT: Request for Quotes (RFQ) N6852026Q1007. Quotes must at the minimum include: Unit Pricing per line item as shown on the separately attached Request for Quote (RFQ). Vendor Information Contact name, phone number and email address Company Cage Code A capability statement outlining relevant expertise and certifications for providing Cryogenic Maintenance and Repair Services. To be eligible for the award, offerors must: Be registered and active in SAM.gov. CONTRACT TYPE: Under FAR Parts 12 and 13 the Government intends to award a single firm fixed price (FFP) award which includes Not to Exceed (NTE) line items (FAR 13.302-2). Place of Delivery, Inspection, and Acceptance: Delivery FOB Destination: Fleet Readiness Center East (FRCE) is located at Marine Corps Air Station (MCAS) Cherry Point, North Carolina.
68%
Combined Synopsis12/19/2026
Naval Surface Warefare Center Carderock Division (NSWCCD) intends to award a Firm Fixed Price (FFP) contract on a sole source basis to purchase services from Craneworks Inc. to support the Operations Department, Infrastructure Division weight handling program. Services include annual inspections, weight/load testing, monthly inspections, preventative/basic maintenance, service requests, and repairs.Craneworks Inc. is uniquely qualified to provide these services for the following reasons:Mandatory NAVFAC P-307 Compliance: NAVFAC P-307 (Management of Weight Handling Equipment (WHE)) is not a best-practice guideline; it is a strict, mandatory regulatory requirement for all Navy weight handling operations to prevent catastrophic failure, property damage, and loss of life. Craneworks Inc is currently the only known vendor possessing the full suite of mandatory NAVFAC P-307 certifications required to operate, inspect, and certify Navy cranes within a two-hour radius of NSWCCD. It is imperative that the company be within a two hour call out radius in the event that a crane requires urgent repairs in the middle of a WHE operation.Interested parties may identify their interest to this requirement by submitting a capabilities statement no later than 2:00PM July 24 2026. This notice of intent is NOT a request for competitive proposals. However, all responses received by 2:00PM on 07/24/2026 will be considered by the Government. A determination by the Government not to compete this proposed purchase order based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Inquiries should be directed to both James McGarvey at james.m.mcgarvey.civ@us.navy.mil and Heather Valiga at heather.l.valiga.civ@us.navy.mil.
62%
Combined Synopsis07/24/2026
Naval Surface Warefare Center Carderock Division (NSWCCD) intends to award a Firm Fixed Price (FFP) contract on a sole source basis to purchase services from Craneworks Inc. to support the Operations Department, Infrastructure Division weight handling program. Services include annual inspections, weight/load testing, monthly inspections, preventative/basic maintenance, service requests, and repairs.Craneworks Inc. is uniquely qualified to provide these services for the following reasons:Mandatory NAVFAC P-307 Compliance: NAVFAC P-307 (Management of Weight Handling Equipment (WHE)) is not a best-practice guideline; it is a strict, mandatory regulatory requirement for all Navy weight handling operations to prevent catastrophic failure, property damage, and loss of life. Craneworks Inc is currently the only known vendor possessing the full suite of mandatory NAVFAC P-307 certifications required to operate, inspect, and certify Navy cranes within a two-hour radius of NSWCCD. It is imperative that the company be within a two hour call out radius in the event that a crane requires urgent repairs in the middle of a WHE operation.Interested parties may identify their interest to this requirement by submitting a capabilities statement no later than 2:00PM July 24 2026. This notice of intent is NOT a request for competitive proposals. However, all responses received by 2:00PM on 07/24/2026 will be considered by the Government. A determination by the Government not to compete this proposed purchase order based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Inquiries should be directed to both James McGarvey at james.m.mcgarvey.civ@us.navy.mil and Heather Valiga at heather.l.valiga.civ@us.navy.mil.
62%
AwardedOpen

Additional Details

Solicitation Number

M6700119Q1089

Archive Date

May 10, 2019

Office Address

CHERRY POINT, NC, 28533-0018