GovChime
Notice ID: 5538b3b815c0459898b38553dcc9cdb5Special Notice

Notice of Intent to Award to Badger Meter, Inc.

Archived. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 AM UTC−05:00
Posted
December 5, 2022
Notice type
Special Notice
NAICS
811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Agency
Department of WarDepartment of the Navy

Notice details

Office
COMMANDER
Place of performance
Milwaukee, WI, 53224
Last updated
Dec 4, 2025

Identifiers

Solicitation number
M6700423Q0012
Notice ID
5538b3b815c0459898b38553dcc9cdb5

Description

The Marine Corps Logistics Command, Contracts Department (CONT), intends to solicit and contract with Badger Meter, Inc. (CAGE 05105), of Milwaukee, WI on a sole-source basis for the purchase of Raw Data Calibration with Programing of Badger Meter Turbine Flow Meter Models: C-LB45-A010-MIL / C-LB45-A009-MIL aboard the Marine Depot Maintenance Command Production Plant Albany (MDMC PPA). The North American Industry Classification Standard (NAICS) code assigned is 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. No solicitation will be posted on this website for this requirement. A Justification and Approval document is attached to this notice. Any potential source may contact the person indicated above to discuss their ability to offer the required services for future acquisitions. National Stock Number N/A Specification(s) CLIN 0001 Raw Data Calibration with Programing of Badger Meter Turbine Flow Meter Models: C-LB45-A010-MIL / C-LB45-A009-MIL Qty: 23 Unit: Each

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:M6700423Q0012
  1. Special NoticeCurrentDec 5, 2022

    Notice of Intent to Award to Badger Meter, Inc.

    Notice 5538b3b815c0459898b38553dcc9cdb5 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The 115th Fighter Wing in Madison WI is conducting market research to identify sources capable of providing indoor firing range cleaning in accordance with the attached Performance Work Statement (PWS). The Government intends to use information received in response to this Sources Sought notice to: assess industry capability and commercial availability; identify customary commercial practices for indoor firing range cleaning; identify potential issues, ambiguities, omissions, or recommended revisions to the PWS; and evaluate the feasibility of a small-business or other socioeconomic set-aside acquisition strategy. This notice is issued solely for market-research and planning purposes. It is not a solicitation, request for proposal, request for quotation, invitation for bid, or commitment by the Government to award a contract. The Government will not reimburse respondents for costs incurred in preparing or submitting a response. Range Ammunition History: The range does not currently use, and has not used, lead ammunition. Respondents are requested to consider this condition when reviewing the PWS and providing recommended commercial practices, required safety measures, cleaning methods, waste-handling procedures, and proposed PWS revisions. Responses should provide company information, which must include: Business name. Unique Entity Identifier (UEI). Provide a brief description of experience and capability to perform services as described in the PWS. Include if these services can be self-performed or if they will be subcontracted. The respondent’s business size under the recommended NAICS code and applicable size standard ($12.5M for 811310), along with any applicable socioeconomic designations Respondents are requested to review the attached PWS and provide feedback on the following items. Responses may be used to refine the requirement and revise the PWS. State whether the PWS can be performed as written. If not, identify the specific requirement at issue and provide a recommended revision or alternative approach. Identify any requirement that is unclear, ambiguous, incomplete, impractical, unusually restrictive, inconsistent with customary commercial practice, or likely to create unnecessary cost, schedule, safety, or performance risk. The range does not currently use, and has not historically used, lead ammunition. Based on this condition, identify any PWS requirements that should be revised, removed, added, or tailored. Explain the basis for each recommendation. Identify any cleaning, inspection, preventive-maintenance, testing, documentation, reporting, consumable, or support service that is normally included in a commercial turnkey indoor firing range cleaning and maintenance service but is not addressed in the PWS. Identify any additional information that would be needed to accurately price and perform the requirement, Identify qualifications, licenses, certifications, OEM authorizations, or specialized personnel required for the work. Any other recommendations or concerns. The Government is considering conducting a pre-solicitation site visit for interested vendors. The purpose of a site visit would be to allow potential offerors to observe facility conditions and obtain information relevant to the anticipated requirement. Interested firms should indicate whether they would participate in a pre-solicitation site visit.
-Market Research11/08/2026
This is a combined synopsis/solicitation for commercial products and commercial services. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This enclosure is an addendum to FAR provision 52.212-1, Instructions to Offerors Commercial Products and Commercial Services, which applies to this acquisition. Competitive quotes are being requested under Request for Quote (RFQ) Number N66001-27-Q-6004. The North American Industry Classification System (NAICS) code applicable to this acquisition is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance and the small business size standard is $12.5 Million. This procurement is not a Set-Aside. Quotes submitted by Small Business and Large Businesses will be accepted by the Government.
-Combined Synopsis11/18/2026
This contract support requirement will cover maintenance, repair, alterations, demolition, load testing, certifications, and provide assistance with Government inspections for regional crane maintenance, repair, and inspection support services, for customers in support of the military mission at the listed Federal Installations. The Contractor shall furnish all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering, and other items necessary to provide the services required. The Governments minimum needs have been verified by the certifying technical and requirements personnel. Specifically, the contracted support requirement will cover maintenance, repair, alterations, load testing, and provide assistance with Government inspections for the locations listed above. Additionally, the services will provide system and user specific documentation for preventive maintenance requirements and operational procedures. Period of Performance (PoP): the requirement is for one (1) base year of twelve (12) months and seven (7) twelve (12) month option periods.
-Sole Source / J&AOpen
Sole Source Solicitation U.S. Government ~ Tax Exempt All quotes/responses shall be submitted via email to Michael.j.coffey52.civ@us.navy.mil no later than 18 September 2026 at 07:00am Eastern Standard Time. Solicitation N00421-26-Q-1350 is issued with intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and award the proposed purchase order on a sole source basis with Colibrium Additive, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 12 and 13. Offerors must be registered in SAM.GOV database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.SAM.gov. NO SUBSTITUTIONS All Products Must be New Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by no later than 18 September 2026 at 07:00am Eastern Standard Time. All offers will be considered by the Government. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the Government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. ***Instructions to Offerors*** Representation Corporation Regarding Delinquent Tax Liability or a Felony conviction under any Federal Law. All offers must complete FAR 52.204-26 within SAM. If 52.204-26 Section K is completed as “does not” for provision and use of the prohibited equipment and services, FAR 52.204-24 Section K would not be completed and submitted separately as part of the offer per direction within FAR 52.204-24 itself. If FAR 52.204-26 includes “does” for either provision or use, FAR 52.204-24 Section K is required to be completed and submitted as part of the proposal. Offers must complete 52.212-3, Offeror Representations and Certifications-Commercial Items in Section K of the solicitation. This is a firm fixed-price procurement; therefore, the offeror’s initial offer should represent the vendor’s best quote in terms of lowest price and in accordance with Section B of the SF-18. Your quote will only be evaluated on the information you provide. ***Basis for Award*** All interested parties MUST submit a quote no later than 18 September 2026 at 07:00am Eastern Standard Time. Award will be made to the vendor that submits the lowest, firm fixed-price quotation that meets all the requirements either in Section B. See attached SF-18. ***Instructions to Offerors*** Please include the following information with your response: FOB: ______________________ Shipping Cost: ______________ Tax ID# ____________________ Dun & Bradstreet # _____________________ Cage Code: _________ You must be registered in System for Award Management (Sam.Gov) Business Size: Small Business Yes or No GSA or SEWP Contract # if applicable: ________________________ Estimated delivery time after issuance of purchase order ____________________ Published Price list. Total Price All interested parties must submit quotes to both below points of contacts. Government Points of Contact: Michael Coffey NAWCAD Procurement Group, 21983 Bundy Road, BLDG 441 Patuxent River, MD 20670-1127 Email: Michael.j.coffey52.civ@us.navy.mil *YOU MUST SUBMIT SIGNED DOCUMENTATION VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR*
-Combined Synopsis09/18/2027
SOURCES SOUGHT: North Star Imaging (NSI) Computed Tomography (CT) Maintenance Sole Source Procurement Notice Type: Sources Sought Title: North Star Imaging Computed Tomography Maintenance PMT: N68520-26-RFPREQ-600000V-0043 NAICS Code: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PSC Code: J036 – MAINTENANCE/REPAIR/REBUILD OF SPECIAL INDUSTRY MACHINERY Response Due Date: 28 AUGUST 2026 at 12:00 PM EST 1.0 Introduction The Naval Air Systems Command (NAVAIR), Commander, Fleet Readiness Centers (COMFRC), Patuxent River, Maryland intends to procure a requirement for continued maintenance support of the warfighter. The Government requires a standard and preventative maintenance service agreement for the North Star Imaging Computed Tomography X5000 (CT Scanner) equipment. The Government intends to solicit and negotiate with only one source under the authority of FAR 6.103-1(b). Only one responsible source and no other supplies or services will satisfy agency requirements. Intended Source: North Star Imaging 19875 S Diamond Lake Road Rogers, MN 55374 [OEM/Cage Code: Z9VAFBVBKEE8/0KGB3] Contract Type: The Government is anticipating this contract to be a Firm Fixed Price (FFP) contract. For more detailed information regarding this requirement please email Contract Specialist, Melissa M. Walker, melissa.m.walker43.civ@us.navy.mil, with company Cage Code and access will be granted to the following via DoD Safe: 1. Draft Statement of Work (SOW) Attachment 1 2. Naval Air Warfare Center (NAWCD) Lakehurst (LKE), NJ (Serial Number 18061557) Addendum Gold 3. Marine Corps Air Station (MCAS) Cherry Point, NC, (Serial Number 21041923) Addendum Silver The following dates are anticipated time frames associated with this requirement: 1. Estimated RFQ release: 19 October 2026 2. Estimated Award Date: 1 December 2026 3. Period of Performance (POP): The anticipated period of performance includes a twelve (12) month base period, 2 December 2026 through 1 December 2027, and one (1) option year, 2 December 2027 through 1 December 2028. 2.0 Disclaimer THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 Requirement Description To meet this requirement the potential offeror must be an authorized reseller of the NSI CT X5000 Scanner and be able to access the OEM maintenance manual referenced in the DRAFT Statement of Work. Proof of Authorized Reseller Status: If the responding company is not the OEM, a letter or official documentation from the OEM confirming the respondent is an authorized reseller capable of providing the required software licenses and support to the Federal Government. Description Standard 12-month Gold PM, 2 visits - Dual Tube (LKE) Standard 12-month Silver PM, 2 visits - Dual Tube (COMFRCE MCAS CHP) Lapse in Software Maintenance Upgrade Fee (LKE) Lapse in Software Maintenance Upgrade Fee (COMFRCE MCAS CHP) Standard 12-month Software Maintenance Contract - DR & CT - (unlimited software/unlimited phone support) (LKE) Standard 12-month Software Maintenance Contract - DR & CT - (unlimited software/unlimited phone support) (FRC-E MCAS CHP) Upgrade to Gold Level PM, 2 visits - Dual Tube Parts - Dual Focus Analog Generator Parts - X-Ray Tube Head Head for 450v ODC - Travel Data 4.0 Eligibility a. The applicable NAICS code for this requirement is 811310, "Commercial and Industrial Machinery and Equipment (Except Automotive and Electronic) Repair and Maintenance” with a Small Business Standard of $12.5M. b. The Product Service Code is J036 "Maintenance/Repair/Rebuild of Equipment – Special Industry Machinery". c. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2021-O0008, revision 1). 5.0 Submission Details Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed action based on responses to this notice is solely within the discretion of the Government. Although the Government intends to sole source this requirement, all responsible sources may submit a capability statement, which shall be considered by the agency if received by the response deadline. Any vendor who believes they can meet this requirement as outlined in paragraph 3.0 must submit a brief capability statement that adheres to the following instructions: Page Limit and Format: Five (5) 8.5 X 11-inch pages in Times New Roman font of not less than 10 points demonstrating their ability to provide the exact requested software. Document Type: Microsoft Word or Adobe PDF. Delivery: Submission via email to Melissa M. Walker melissa.m.walker43.civ@us.navy.mil Please include "Sources Sought Response: North Star Imaging CT Scanner" in the email subject line. Response date: Responses are due by 12:00 PM EST on 28 August 2026. Classified Information: No classified information shall be submitted in response to this Sources Sought. Phone Calls: No phone calls will be accepted. All questions must be submitted via email to the Contract Specialist, Melissa M. Walker at melissa.m.walker43.civ@us.navy.mil. Company Address, Company Business Size, and Points of Contact (POC), including names, phone numbers, and email addresses. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice.
-Market Research08/28/2026

Additional Details

Solicitation Number

M6700423Q0012

Archive Date

Not specified

Office Address

ALBANY, GA, 31704-0313