MH-139 Rotor Brake
Archived on August 8, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EDT
- Posted
- June 25, 2026
- Notice type
- Sources Sought
- Set-aside
- No Set aside used
- NAICS
- 336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.INTELLIGENCE, SURVEILLANCE, RECONNAISSANCE.FA8692 HELICOPTER PGM AFLCMC WIH
- Place of performance
- Wright Patterson AFB, Ohio
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- MH139-CR05
- Notice ID
- 0d3a89e596704b3d8b68019942b7ff15
Description
This Request for Information (RFI) is issued for informational and market research purposes only in accordance with Federal Acquisition Regulation (FAR) Part 10. It does not constitute a solicitation, a Request for Proposal (RFP), or a promise to issue an RFP in the future. The Government will not reimburse any company or individual for expenses associated with preparing or submitting information in response to this RFI. The information provided may be used by the U.S. Air Force in developing its acquisition strategy, Statement of Work (SOW), and performance specifications. Interested parties are responsible for adequately marking proprietary or competition-sensitive information.
BACKGROUND AND SCOPE
The Air Force Life Cycle Management Center (AFLCMC), MH-139A Program Office (AFLCMC/WIH), is conducting market research to identify sources capable of designing, integrating, and testing a rotor brake for the MH-139A.
The objective of this effort is to integrate a rotor brake system on the MH-139A to support safe and efficient ground operations, particularly in high-wind environments. The addition of a rotor brake capability will optimize ground turn-around times, facilitate rapid refueling operations, reduce rotor system wear, and enhance overall ground safety for aircrew and support personnel.
To meet this requirement, the Government intends to leverage the commercial baseline rotor brake system developed for the Leonardo AW139 (the commercial variant of the MH-139A).
Technical support is expected during the initial implementation and testing of the new configuration. Subject matter expert support is expected for a period after initial implementation and testing.
Key requirements for the modified system include:
- Procurement & Installation: The objective is to procure and install the commercial baseline Rotor Brake (e.g., P/N 3G6351F00113 per AW139 RFM Rev 27 Sup 1).
- Standardization: Installation must be standardized across all configurations of the MH-139A fleet.
- Systems & Software Integration: The installation must safely interface with the aircraft's existing avionics, hydraulic systems, and engine controls. This includes all necessary software interlocks (e.g., within the Operational Flight Program [OFP], Crew Alerting System [CAS], and Full Authority Digital Engine Control [FADEC]) to prevent inadvertent engagement during flight or high-power ground operations.
- Airworthiness & Structural Integrity: Follow all applicable Federal Aviation Administration (FAA) and MIL-HDBK-516C guidelines. The vendor must account for the added weight and vibration characteristics of the rotor brake assembly to ensure it does not negatively impact the fatigue life or structural limits of the transmission/main gearbox deck.
- Support & Fit-Testing: Provide technical support during initial installation and testing. The Government will provide scheduled access at a Government-designated facility for fit-checks. The contractor must provide all hardware required for fit-checks. The Government will not provide any Furnished Equipment (GFE).
- Certification & Airworthiness Pathway: Ability to deliver the complete engineering data package necessary to obtain an FAA-approved Supplemental Type Certificate (STC) and support a military Engineering Change Proposal (ECP).
- Certification Experience: Describe your company's process, timeline, and prior experience in executing ECPs and obtaining FAA STCs for dynamic/drive system modifications on vertical lift aircraft.
- Risk Mitigation: Identify potential engineering challenges (e.g., FADEC integration, dynamic load limits, hydraulic routing) associated with obtaining an FAA-approved STC and supporting a military ECP for this project, and provide recommended strategies to mitigate these risks.
INSTRUCTION TO POTENTIAL RESPONDENTS
Respondents are encouraged to provide comprehensive responses that demonstrate existing technology, qualifications, and experience. Please structure your response to address the following sections:
A. Company Information:
- Company Name, Address, CAGE Code, and Website URL.
- Point of Contact (Name, Title, Phone, Email).
- Business Size Status under NAICS Code 336413 (Aircraft Manufacturing), with a size standard of 1,500 employees. Please self-certify for all applicable categories:
- Small Business (Yes/No)
- Woman-Owned Small Business (WOSB) (Yes/No)
- HUBZone Certified (Yes/No)
- Service-Disabled Veteran-Owned Small Business (SDVOSB) (Yes/No)
- Company Ownership (Domestic or Foreign-owned).
- Interest as Prime Contractor or Subcontractor.
B. Technical Capability:
- Provide a detailed description of your proposed solution(s). Include concept diagrams, illustrations, and preliminary specifications.
- Describe the process for procuring, installing, and testing the rotor brake. Include estimated timelines for these phases, as well as expected lifecycle maintenance actions (repair intervals, consumables, life expectancy).
- State whether your company possesses the necessary technical data and proprietary rights for the MH-139A (based on the Leonardo AW139 platform) to perform this dynamic modification.
- Detail your company's experience with similar drive system/transmission modifications on vertical lift aircraft.
- Outline your approach to system integration. Explicitly detail how your solution addresses the required electrical, hydraulic, and software interlocks (OFP/CAS/FADEC) to ensure flight safety.
- Provide an impact analysis on how aircrew/maintenance training and training systems (e.g., flight simulators, maintenance trainers) will need to be updated to reflect the new rotor brake configuration, including a proposed timeline and associated risks.
C. Cost and Schedule:
- Provide a Rough Order of Magnitude (ROM) cost estimate broken down into two parts:
- Non-Recurring Engineering (NRE): Design, systems integration (including software updates), fit-testing, and ECP/STC certification data package support, to include the engineering source data required for TCTO generation and Technical Order (TO) updates.
- Modification Kit/Installation: The per-aircraft cost for the physical Modification Kit and field installation.
- Provide an estimated timeline from contract award to the development, testing, and initial operational capability of the first retrofitted aircraft.
Small Business Utilization:
- For Small Businesses: Describe how you will comply with FAR 52.219-14, Limitations on Subcontracting, if the requirement is set-aside.
- For Large Businesses: Provide a realistic small business utilization target as a percentage of total contract value and explain your rationale.
RESPONSES AND COMMUNICATIONS
- Responses shall not exceed 15 pages (single-sided, 12-point font).
- Submit responses electronically by
- Mark all proprietary information clearly. Unmarked information will be considered publicly releasable. Be advised that government-contracted support personnel may handle submissions under non-disclosure agreements.
- Prospective contractors must be registered in the System for Award Management (SAM) at https://www.sam.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
MH-139 Rotor Brake
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Naval Air Systems Command, in support of the PMA-261 CH-53 Heavy Lift Helicopters Program Office, intends to negotiate and award a sole-source modification to an existing Basic Ordering Agreement (BOA) delivery order with Sikorsky. This contract action will incorporate a tailored vibration requirement into the OBIGGS NRE delivery order. The requirement is based on CH-53K flight-test data and provides a more representative aircraft vibration environment than the prior specification. Under the authority of Title 10, U.S.C. § 3204(a)(1), as implemented by Federal Acquisition Regulation (FAR) 6.103-1, “Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements,” the Government intends to solicit and negotiate with only one source for the proposed contract action described above. Sikorsky is the designer, developer, and sole producer of the CH-53K aircraft and is the only known contractor with the requisite knowledge, experience, and technical data necessary to provide the required supplies and services in support of the CH-53K program. The Government does not possess adequate license rights in the technical data package necessary to support a competitive procurement for this requirement. As a result, only Sikorsky has the unrestricted totality of technical data, unique engineering support experience, and detailed knowledge of the CH-53K to meet the USN's requirements. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. Interested parties may identify their interest and capability by responding to this notice. The Government will consider all information received before the closing date of this synopsis. Information received will be considered solely to determine whether to conduct a competitive procurement. A determination by the Government not to compete the proposed contract modification based on responses to this notice is solely within the Government’s discretion. No telephone inquiries will be entertained. Responses must be submitted in writing by email, U.S. mail, or facsimile to the attention of Tyler Scott or Kevin Ritter using the contact information provided in this presolicitation notice. Companies interested in subcontracting opportunities should contact Jason Lockwood, Sikorsky Subcontracting Manager, at 203-225-3657 or Jason.t.lockwood@lmco.com. | 57% | Pre-Solicitation | 11/13/2026 |
The Naval Air Systems Command (NAVAIR) intends to negotiate and award a sole source hybrid (Firm Fixed Price (FFP), Cost Plus Fixed Fee (CPFF)/Cost Indefinite Delivery/Indefinite Quantity (IDIQ) Contract with Lockheed Martin Corporation 1801 State Rt 17 C, Owego, NY 13827 for the sustaining engineering, program management, logistics, flight test support, training, repairs, reliability improvements, configuration and obsolescence management, system and subsystem software development, and deployed field services for the H-53, H-60 and Presidential helicopter fleets. Lockheed Martin is the sole designer, developer and manufacturer of the above-mentioned helicopter fleets. Lockheed Martin is the only known responsible source with the requisite knowledge, technical data, capability, experience, special tooling, and test facilities necessary to fulfill the Government's requirements within the required timeframes. This requirement will be procured in accordance with the statutory authority permitting other than full and open competition under 10 U.S.C. 3204(a)(1), as implemented by the Federal Acquisition Regulation (FAR) 6.103-1, in that Lockheed Martin is the only responsible source and no other supplies or services will satisfy agency requirements. For subcontracting opportunities please contact Michael Dokla (Lockheed Martin Supply Chain Team), at 203-242-6655 or mike.dokla@lmco.com. | 57% | Pre-Solicitation | 11/25/2026 |
Login at https://piee.eb.mil and search for 'N6133126R0001' to obtain more details.* | 57% | Combined Synopsis | 09/24/2026 |
Issued pursuant to Revolutionary FAR Overhaul (RFO) FAR 15.101(c) and RFO FAR Part 10 solely for information, market research, and planning purposes. This market survey is conducted by the Aerial Targets Program Office (AFLCMC/EBAY) under the Air Force Portfolio Acquisition Executive for Weapons (AFPAE/WP) to obtain industry capabilities, rough order of magnitude (ROM) information, and data needed to support commercial product/service, non-developmental item (NDI), and small business determinations under RFO FAR 10.001(f), and to inform acquisition planning. Per Title 10, U.S. Code §4172, major munitions and missile programs must demonstrate lethality against appropriate, threat-representative targets prior to full-rate production. The Aerial Targets mission is to provide target aircraft that replicate threat systems, including performance, signatures, and countermeasures of adversary aircraft. The objective of this RFI is to identify a range of solutions to populate a family for systems needed throughout the spectrum of missions in Defensive and Offensive Counter Air capabilities. These solutions may represent the full range of airborne threats, spanning from inexpensive “hobby drones” to the most advance adversary fighter and large-scale aircraft. This RFI is intended to: Identify commercially available or near-term solutions Understand industry capabilities and innovative approaches Inform future acquisition strategies and budgetary requirements and assist the agency in making commerciality, NDI, and small business set-aside determinations See attached RFI and Question and Answer documents and for additional details. ------------------------------------------------------------------------------------------------------------------ In accordance with Section 10 of the attached RFI, attached are the final Questions and Answers posted on 11 SEPTEMBER 2026. ALL FINAL RESPONSES ARE DUE BY 28 SEPTEMBER 2026 @ 1600 CENTRAL. | 52% | Market Research | 11/25/2026 |
T-38 Wingtips Left-Hand & Right-Hand. NSN: 1560-01-527-2194 XE Quantity: 66 NSN: 1560-01-527-2195 XE Quantity: 64 | 52% | Awarded | Open |
Additional Details
Solicitation Number
MH139-CR05
Archive Date
Aug 8, 2026
Office Address
WRIGHT PATTERSON AFB, OH, 45433-7104