Market Survey - Laboratory Support Services - Mike Monroney Aeronautical Center
Archived on February 4, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM CST
- Posted
- January 9, 2026
- Notice type
- Sources Sought
- NAICS
- 541380: Testing Laboratories and Services
- Agency
- Department of TransportationFEDERAL AVIATION ADMINISTRATION
Notice details
- Office
- 6973GH FRANCHISE ACQUISITION SVCS
- Place of performance
- Oklahoma City, Oklahoma
- Last updated
- Nov 4, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- MRKTSVY-26-RFI-LABSVS
- Notice ID
- 8ae04889e5f34b868096d929af48b6ec
Description
The purpose of this announcement is to conduct a market survey to solicit statements of interest and capabilities from interested vendors in accordance with FAA Acquisition Management System (AMS) Policy 3.2.1.2.1. This market survey will enable the FAA to review responses that are current and will assist with acquisition planning based on current data. Responses to this market survey will be used for informational purposes only.
The FAA Mike Monroney Aeronautical Center has a requirement for laboratory analysis in support of various analytical requirements. Prospective activities include routine wastewater discharge monitoring as required by permit, monthly storm water monitoring, special water and wastewater studies (short or long term), hazardous waste analysis, soil analysis, asbestos sample analyses, both air and bulk, and third party air monitoring for asbestos abatement projects, and air samples associated with industrial hygiene monitoring, on an “as required” basis at the Mike Monroney Aeronautical Center, 6500 South MacArthur Boulevard, Oklahoma City, Oklahoma. (See attached DRAFT Statement of Work.)
The FAA contemplates awarding an Indefinite Delivery/Indefinite Quantity (IDIQ) follow-on contract that will include option provisions to renew for four (4) one-year periods. It is anticipated the contract will be Firm Fixed Price. The FAA will review the responses to this Market Survey and will make appropriate acquisition planning decisions that best meet the FAA’s needs. The results of the Market Survey will assist the FAA to determine the extent of the requirement that may be set-aside for Small Businesses (SB),
This market survey is to request information that will enable the FAA to make a screening decision to determine qualified firms that have the ability to provide these services. The FAA reserves the right to add incumbent contractors and/or other sources which meet the criteria and have performed satisfactorily on previous procurements.
The North American Industry Classification System (NAICS) code and size effort applicable to this requirement:
NAICS: 541380 Testing Laboratories and Services
Size Standard: $19M
Interested firms submitting the response are requested to provide the following information:
COMPANY INFORMATION
- Name and address of company
- Point of contact (name, title, telephone number, and email address)
CAPABILITY STATEMENT – This document should identify the following:
- Type of Services provided by your Firm
- Size and type of services provided on previous contracts
- Number of years in business
- Local or satellite laboratory to meet 24 hour response time
All responses to this market survey should be received by 4:00 p.m. Central (Oklahoma) Time, January 20, 2026
All submittals including attachments must be submitted electronically to the Contracting Officer using the following email address: andre.casiano@faa.gov.
Please include “MARKET SURVEY RESPONSE: Laboratory Services” in the subject line of your email. Information provided will not be released however please mark PROPRIETARY on all your documents submitted as necessary.
This market survey is for planning purposes only and shall not be construed as a request for proposal or as an obligation on the part of the FAA to acquire these services. No entitlement to payment of direct or indirect costs or charges by the FAA will arise as a result of submission of responses to this market survey and the FAA’s use of such information.
Award Overview
Mentioned in the description
From description, unverifiedces. The FAA reserves the right to add incumbent contractors and/or other sources which meet
We searched the solicitation description for the word “incumbent” and surfaced the surrounding text. This is not a confirmed match.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Lifecycle
- 3Version 3Sources SoughtArchivedCurrent
Market Survey - Laboratory Support Services - Mike Monroney Aeronautical Center
- 4Version 4SolicitationArchived
Type changed from Sources Sought to Solicitation
Solicitation - Laboratory Support Services - Mike Monroney Aeronautical Center
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Contractor shall furnish key personnel to provide services necessary to perform onsite Radiation Safety Officer (RSO) duties for the Eastern Oklahoma Veteran Affairs Health Care System (EOVAHCS). The RSO will oversee the daily operations for the facility, performing all duties associated with that role. The RSO position is a director-appointed position and answers directly to the Chief of Staff (COS) or designee. The RSO is responsible for all radiation-related issues that are associated with the Eastern Oklahoma Veteran Affairs Health Care System (EOVAHCS). The RSO will establish and implement radiation safety procedures commensurate with the use of fluoroscopy and reviewing them periodically to ensure their conformity with Federal Radiation Safety Regulations VHA directive 1105.02. Ensuring regulatory standards for radiation safety and medical physics practices are followed throughout the facility in accordance with: VHA-Directive-1105.02-Nuclear-Medicine-and-Radiation-Safety-Services.aspx D 1105 Management of Radioactive Materials for SharePoint_20251126.pdf VHA 1129 Directive.pdf and 10 CFR 35.2 (see RSO definition: experienced RSO) or 10 CFR 35.50 and 35.59 (for a new RSO) NUREG-1556, Vol. 9, Rev. 35 CFR § 731.106 https://www.ecfr.gov/current/title-5/chapter-I/subchapter-B/part-731/subpart-A/section-731.106. Place of Performance: Services shall be provided onsite at the following Eastern Oklahoma Veteran Affairs (VA) Health Care System (EOVAHCS) locations: Jack C Montgomery Veteran Affairs Medical Center, located at 1011 Honor Heights Dr., Muskogee, OK 74401 Ernest Childers Veteran Affairs Outpatient Clinic, located at 8921 S Mingo Rd Tulsa, OK, 74133 James Mountain Inhofe Veteran Affairs Medical Center, located at 440 S Houston Ave, Tulsa OK, 74127 | - | Solicitation | 11/03/2026 |
The Contractor will inspect and test the pressure vessels and boilers at the USACE Newt-Graham Lock and Dam and the Robert S. Kerr Marine Terminal locations as required per statute and/or code. Inspections will be performed in accordance with ASME, NBIC and/or local standards, applicable codes, ordinances, statutes and/or regulations. After inspection, a report will be submitted to include references to applicable violations and list the general condition of the items related to public safety, and USACE (US Army Corps of Engineers) employees. The report will also include current date inspected. Items related to operations, maintenance or performance will not be provided. The necessary preparation of the equipment to be inspected shall be at the sole expense and responsibility of the US Army Corps of Engineers. The Contractor shall be with a government employee at all prepared sites for inspection. | - | Solicitation | 03/10/2026 |
This is a "REQUEST FOR INFORMATION" only for the proposed work listed in the requirements section below. This Sources Sought Notice is not a request for formal proposals or quotes. Responses to this Sources Sought must be received by email no later than the date specified in the response section. The intent of this sources sought is for market research to make appropriate acquisition decisions and to gain knowledge of potential qualified Service-Disabled Veteran Owned, 8(a), HUBZone, or other Small Businesses interested and capable of performing the proposed work. Documentation of technical expertise must be presented in sufficient detail for the Government to determine whether your company has the capability and experience to compete for this acquisition. Responses to this notice shall include the following: Company Name Point of Contact (POC) Name POC phone and email UEI number Business Size based on NAICS 541380 with an industry size standard of $19.0 million Socio-economic category, if applicable (e.g., Service-Disabled Veteran Owned Small Business, 8(a), HUBZone, Women Owned Small Business, Small Disadvantaged Business, etc.) Estimation of your subcontracting requirement Intent to submit a quote if an RFQ is published Listing of your relevant past experience for projects that are similar in size and scope to the described requirement and that have occurred in the past 5 years. Include contract numbers, contact name and title, locations, dollar amounts, and work descriptions The proposed action is for a hybrid firm-fixed-priced/time & materials performance-based services purchase order. Refer to the draft Performance Work Statement and Master Requirements List for further details. Responses to this Sources Sought Notice may be accomplished using the MS Forms attachment or via e-mail to WFL.Services@dot.gov which shall include all information requested in (1) through (9) above. Determination by the Government to not compete with this proposed contract action based on responses to this notice is solely within the discretion of the Government. The Government is not obligated to, nor will it, pay for or reimburse any costs associated with responding to this sources sought synopsis request. This notice shall not be construed as a commitment by the Government to issue a solicitation or ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. Responses are due no later than December 2, 2026, at 2:00pm PST. | - | Market Research | 12/02/2026 |
The National Highway Traffic Safety Administration (NHTSA) is issuing this Sources Sought Notice to identify potential qualified Small Business (SB), Small Disadvantaged Business (SDB), 8(a) Certified SDB, HUBZone SB, SDVOSB, or WOSB concerns that may be interested in and capable of performing the work described herein which is to provide Full Scale Vehicle Crashworthiness Testing and Side Air Bag Out-of-Position Testing for the New Car Assessment Program (NCAP). NHTSA welcomes all qualified Small Business concerns, with the appropriate NAICS Code and past experience to submit their Corporate Capability Statements that demonstrate their ability to successfully accomplish the goals of the project as listed below. NHTSA does not intend to award a contract on the basis of responses to this notice or otherwise pay for the preparation of any information submitted. Acknowledgement of receipt of responses will not be made; no formal evaluation of the information received will be conducted by NHTSA. NHTSA may; however later on issue a Request for Proposals (RFP). However, should such a requirement fail to materialize, no basis for claims against NHTSA shall arise as a result of a response to this notice. Background: The National Highway Traffic Safety Administration (NHTSA) is an agency of the U.S. Department of Transportation (DOT). NHTSA’s mission is to save lives, prevent injuries, and reduce traffic-related health care and other economic costs. The agency develops, promotes, and implements effective educational, engineering, and enforcement programs with the goal of ending vehicle crash tragedies and reducing economic costs associated with vehicle use and highway travel. As part of this work, NHTSA conducts a variety of motor vehicle crash tests including, but not limited to, frontal, rear, oblique, side moving deformable barrier (MDB), and side pole impact test modes. NHTSA also conducts various crash avoidance tests, static and dynamic rollover tests, air bag out-of-position low risk deployment tests, tire testing, and testing in accordance with Federal Motor Vehicle Safety Standards (FMVSS). To support future efforts, NHTSA expects to conduct research for future FMVSS, crash avoidance technologies, automated vehicles, and electric vehicles. The agency may also conduct testing to assess new crash test dummies and child restraint systems and may perform research study vehicle safety defects. The New Car Assessment Program (NCAP) is a consumer information program conducted by NHTSA. Its major goals are to: (1) provide consumers with relative safety ratings information to assist them in their vehicle purchasing decisions and (2) use market forces to motivate automobile manufacturers to design vehicles to a higher level of occupant protection. To accomplish these goals, NHTSA utilizes testing contracts to conduct NCAP testing and release test results to the public as quickly as possible so that consumers can use this information when selecting a new vehicle to purchase. The contractor shall support NHTSA’s testing/research efforts by providing inspection, testing, and reporting services for NCAP. Federal law requires new passenger vehicles to be labeled with NCAP safety ratings information published by NHTSA. The Contractor shall be responsible to include all the necessary equipment, personnel, facilities, and management of personnel and workflow as identified in the attached Draft Statement of Work (SOW). Any interested qualified Small Business firms, Small Disadvantaged Business (SDB), 8(a) Certified SDB, HUBZone SB, SDVOSB, or WOSB concerns should submit their Corporate Capability Statement, which demonstrates the firm’s ability and past experience in no more than 10 pages to perform the key requirements described above to the identified NHTSA point of contact listed herein. Any proprietary information should be marked as such. All respondents are asked to certify the type and size of their business organization is in-line with the requirements of this Sources Sought Notice which must be received no later than 10 calendar days from the date of publication or by the closing date of this notice. To facilitate a timely and comprehensive review of all submitted responses, firms should respond using the format requested in this Notice. Please provide the following information for your firm and for any teaming or joint venture partners: General Information Company name, address, point of contact name, telephone, and email address. Data Universal Numbering System (DUNS) Number and Commercial and Government Entity (CAGE) Code. Business size and classification (e.g., large, small, small-disadvantaged, SBA Certified 8(a), HUBZone, service-disabled veteran-owned, woman-owned) based on NAICS code: 541380, Testing Laboratories. If applicable, potential proposed teaming arrangements to include business size and classification of prime and subcontractors. GSA Federal Supply Schedule (FSS) Number (FSS must include NAICS code 541380, Testing Laboratories Identify contracts your company has been awarded under NAICS code: 541380, Testing Laboratories Technical Capability: Provide a brief synopsis to support the firm’s ability to perform all of potential areas of the objective/scope. Identify each task element and provide information to support the firm’s experience, staffing and overall ability to perform the technical area. Evidence of experience and past performance should include contracts/task orders from the past three (3) years similar in scope to this requirement. Examples must include contract numbers, project titles, dollar amounts, periods of performance, and Government points of contact (telephone numbers or email addresses). Documented information to support the firm’s ability to provide the range of research skillsets capability to quickly plan, conduct, and document studies; AND personnel required for this effort in a timely fashion. Any data on previous contracts/task orders on personnel retention and succession planning. Additional Information: Indicate if your firm will submit a proposal if a Request for Proposal (RFP) is issued, and if your firms interest is for Prime contracting, teaming agreement or Joint Venture. Validation of, or recommended NAICS codes for this effort. Validation of, or recommended contract type. Validation of, or recommended GSA vehicle In each potential areas of research, indicate any Small Business Subcontracting opportunities, as applicable. Other Recommendations Any information missing from this requirement that would provide a better understanding of the effort desired. Please submit any other questions or comments along with your response. CONTRACTING OFFICE ADDRESS Department of Transportation (DOT) Headquarters, 1200 New Jersey Avenue, SE, Washington, DC 20590. | - | Market Research | 11/02/2026 |
Request for Information (RFI) only. Purpose This RFI seeks information regarding Laboratory Capabilities to perform pool and torch fire tests of Thermal Protection Systems (TPS) to the U.S. DOT Volpe Center. A qualified vendor must be capable of performing pool and torch fire tests as described in 49 CFR 179 Appendix B. The vendor should also be capable of performing light fabrication and/or assembly of test specimens for the aforementioned tests. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to perform a minimum of two (2) pool fire tests and two (2) torch fire tests for each TPS. The total number of TPS to be tested has not yet been determined. Although the tests will be similar to those defined in 49 CFR 179 Appendix B, this research may require some modifications to the test protocol including but not limited to additional instrumentation, data collection or varying of test parameters such as duration of the fire exposure. The Volpe Center is also looking for the capability to perform light fabrication of test specimens as detailed above. For examples of possible fabrication requirements, see https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Scope of Information Requested The U.S. DOT Volpe Center is seeking information from commercial testing laboratories, university laboratories, and other interested parties on their willingness, ability, and experience in conducting the simulated pool and torch fire testing planned for various tank car TPS. Descriptions of your facility’s pool and torch fire testing capabilities, including equipment, experience, capacity, resources and staff preparedness for testing tank car TPS. You are encouraged to submit publications of relevant past work. Descriptions of any laboratory accreditation or certification related to pool fire testing. Laboratory hourly rates, technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. Descriptions of staff/facility/equipment availability, including any limitations on when fire testing may be conducted (e.g., blackout dates due to seasonal weather conditions) Information on any pre-test data or preliminary sample testing that may be required prior to a full-scale test. Information on your typical post-test laboratory analyses and report formats, and your ability to tailor report/data formats to customer requirements. Description of your facility’s fabrication and assembly capabilities, including: Cutting of 11 gauge steel sheet (0.1196 inches) Cutting of 0.625 inch steel plate Cutting of insulating materials that may generate hazardous airborne particulates such as fiberglass. Mixing and application of coatings to required specifications similar to examples on the PHMSA TPS list. What is the required lead time for fabrication of test specimens? Technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. for fabrication of test specimens. Estimated time to conduct one simulated pool fire and one simulated torch fire test including setup, conduct of the test, cooldown, and teardown of test setup. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | - | Market Research | 11/20/2026 |
Additional Details
Solicitation Number
MRKTSVY-26-RFI-LABSVS
Archive Date
Feb 4, 2026
Office Address
OKLAHOMA CITY, OK, 73125