ADVANCE NOTICE TO INDUSTRY: INTENT TO ISSUE CHALLENGE STATEMENT for the United States Space Command (USSPACECOM) Command and Control Facility (C2F): Design Build Contractor (DBC) Acquisition
Archived on October 15, 2026. Special Notice posted by DEPT OF DEFENSE (DEPT OF THE ARMY) on September 9, 2026.
Place of performance: Redstone Arsenal, Alabama. Full description on SAM.gov.
Description
INDUSTRY ANNOUNCEMENT: INTENT TO ISSUE CHALLENGE STATEMENT for the United States Space Command (USSPACECOM) Command and Control Facility (C2F): Design Build Contractor (DBC) Acquisition
Air Force Civil Engineer Center (AFCEC) seeks a partner to serve as the DBC responsible for the design, construction, fit out, commissioning, and accreditation of the USSPACECOM C2F. The selected contractor will be responsible for providing a mission-ready facility by December 2031. The DBC will be responsible for design and construction of the facility, including all associated Command, Control, Communication, and Computer Information Technology (C4IT) and Fixtures, Furniture and Equipment (FF&E), and must be skilled in Model-Based Systems Engineering (MBSE). Additionally, the DBC will be responsible for providing Construction Surveillance Technicians to ensure construction meets ICD-705 standards in collaboration with the AFCEC team’s SSMs.
This integrated, holistic approach is a significant departure from prior MILCON construction norms; our intent is to provide qualified design-builders time to establish expanded partnerships in advance of the Challenge Statement release. The government will accept questions related to this release. Please submit all questions on the GoColosseum Marketplace under the Industry Announcement titled above. The Government reserves the right to respond to questions at its discretion and may not provide responses to all questions submitted
1. Summary of Overall Objective: AFCEC seeks an innovative, highly capable, and experienced partner to serve as the DBC for design and construction of a new C2F warfighting platform at Redstone Arsenal, Alabama. This mission critical facility, and its supporting data center, is required to support approximately 1,800 personnel and cost approximately $4B to design, build, fit-out, commission, accredit, install FF&E. The C2F will incorporate Radio Frequency (RF) shielding, High-Altitude Electromagnetic Pulse (HEMP) protection, Sensitive Compartmented Information Facility (SCIF) / Special Access Program (SAP) construction, and redundant and resilient infrastructure. The project will be delivered using a collaborative delivery methodology under the Design Build Institute of America (DBIA) Design Build Done Right framework.
This challenge and the resulting agreement are issued pursuant to the Other Transaction Authority (OTA) for military construction projects under 10 U.S.C. § 2808a. This effort is intended to reduce traditional Military Construction (MILCON) delivery timelines by approximately 50%, which the prospective partners should be able to embrace.
USSPACECOM completed a Planning Charette Report in June 2026. AFCEC is in the process of hiring an Owner’s Advisor (OA) to support them on the Project Delivery Team (PDT). The DBC will integrate with the established PDT to help AFCEC, their OA, and the USSPACECOM PMO deliver this facility faster, smarter, and with higher mission assurance than any previous Air Force MILCON effort. The Design Builder will be expected to provide innovative approaches and leverage industry standards to take advantage of the OTA authorities and flexibility outside of traditional FAR-based construction to reduce time and cost.
Eligibility
Open to U.S.- based organizations that have demonstrated success as the DBC on complex Mega Projects of this size, scale, and complexity. Organizations must be able to show expertise in design, construction, C4IT, and FF&E integration.
- Respondents must meet bonding requirements for the entire project amount
- Respondents must possess a Top Secret (TS) Facility Security Clearance; AFCEC intends for a small number of key personnel to obtain the requisite USSPACECOM SCI read-ins to support facility design, IT design, and portions of IT installation. Additionally, CSTs will be required to hold TS/SCI clearance
- Respondents must be Cybersecurity Maturity Model Certification (CMMC) Level 2 compliant or actively pursuing certification. Performance will involve the storage, processing, and transmission of Controlled Unclassified (CUI) per 32 C.F.R. § 170.3
- Respondents must register on https://gocolosseum.org to submit
Selection Criteria
- Selection will be largely qualification based. Additional criteria will be provided in the Challenge Statement.
Timeline
The following timeline is provided for planning purposes only and is subject to change.
- 15 October 2026: Challenge Statement Released on ONIX Marketplace
- 15 December 2026: Challenge Statement Responses Due
Overview
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Special Notice | DEPT OF THE ARMY | Sep 9, 2026 | 69.13 KB |
Lifecycle
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
The Army Contracting Command – Redstone Arsenal is issuing this Sources Sought Notice as a means of conducting market research to identify manufacturing capacity and capability for production of Precision Strike Missile Increment 1 (PrSM Inc 1) follow-on production contract to support the Strategic and Operational Rockets and Missiles (STORM) Project Office. DISCLAIMER This Sources Sought Notice is for informational purposes only. This is not a request for proposal. It is a market research tool being used to determine potential firms capable of providing the supplies described herein prior to determining the method of acquisition. The Government is not obligated to and will not pay for any information received from potential sources because of this Sources Sought Notice. This does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary. BACKGROUND PrSM Inc 1 is a next-generation, long-range surface-to-surface ballistic missile, with launcher compatibility on M142 High Mobility Artillery Rocket System and M270 Multiple Launch Rocket Systems platforms. The purpose of this source sought notice is to conduct market research to identify potential sources with capacity and capability to produce the PrSM Inc 1 missile and pod. TECHNICAL DATA The Government retains Data Rights to Technical Data down to the Line-Replaceable Unit level and is available upon request. Technical Data is Controlled Unclassified Information (CUI) Distro D/CUI, even though the data is only CUI, to receive this information, the requestee is required to have a SECRET clearance. The Government must verify that the requestor/s are authorized (compliant at a minimal with NIST SP 800-171) and equipped to safeguard CUI and SECRET information. This is a multi-step process that requires a minimum of 3-5 business days. Interested parties must provide the following information prior to accessing the technical data. Send requests to: Contract Specialist, Gregory Walcott, at gregory.n.walcott.civ@army.mil and Contracting Officer Monica Clemons, at monica.e.clemons.civ@army.mil. Provide CAGE code that verifies SECRET status and submit requests for access through the SAM.GOV website. The Government will review the National Industrial Security System (NISS) to confirm if the company network/system is authorized to house CUI information. Any interested party for which “SECRET” facility clearance cannot be verified through the NISS will be denied access. All requests for documents shall be made at least 5 business days prior to the Sources Sought Notice closing. Requests made after this time will be processed but extensions to the Sources Sought Notice will not be considered and submission is still required prior to closing. Once “SECRET” facility clearance is verified, the attachments will be made available. REQUIRED CAPABILITIES The STORM Project Office seeks to gauge the industrial base for skills, capacity and capability for production of the PrSM Inc 1. This information will be used to identify possible sources and help shape decisions for follow on efforts. Interested vendors are requested to provide information regarding their capabilities to provide a weapon system (or key subsystems) with the following characteristics (at a minimum): Manufacturing Capability (The "How"): Describe your processes of basic tasks resources, and exclusive agreements that are required to produce missiles of similar complexity as the PrSM Inc 1. Reliability and Maintainability: Describe how your company will achieve high operational availability while maintaining minimal maintenance. Facilities & Advanced Equipment: Provide the total square footage, cleanrooms, specialized tooling, and machinery. Technical & Workforce Qualifications: Specify your certifications (e.g., AS9100, ISO 9001, and DoD Manual 4145.26 etc.). It is expected to already have facilities and personnel to support classified requirements. Digital Engineering & Open Architecture: Explain current IT Architecture Efficiencies, implementation of Modular Open Systems Approach Integration, design to facilitate integration with future platforms to include foreign partners. Cybersecurity: Compliant with current cybersecurity standards for weapon systems Cyber Supply Chain Risk Management, IAW DoDI 8500.01, DoDI 5200.44, NIST SP 800-53 Rev 5, DODI 8510.01 Risk Management Framework CNSSI 1253 and DFARS 254-204-7012, NIST SP 800-171 Rev.3. Personnel and Facility Security Clearances: Obtain a DD Form 254 Contract Security Classification Specification. The prime contractor processing CLASSIFIED information shall obtain a minimum “Secret Clearance” completing a Standard Form 86. The contractor’s facility shall have and maintain facility authorization to operate issued by Defense Counterintelligence and Security Agency. National Security Compliance: with United States laws and regulations on “Export Control,” including the International Traffic in Arms Regulations and the Export Administration Regulations. ELIGIBILITY The applicable North American Industry Classification System (NAICS) code for this requirement is 336414. The Product Service Code is 1410. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement and address the capabilities above and below. ADDITIONAL INFORMATION AND SUBMISSION DETAILS (CAPABILITIES STATEMENT) The requested information is to assist the Government in conducting market research to determine potential business sources that have the assets, skills, experience, financial stability, qualifications, and requisite knowledge required to support the requirement. A determination not to compete this proposed action based upon responses to this notice is solely within the discretion of the Government. It is requested that interested businesses submit to the contracting office a capabilities statement package (no more than 10 pages in length, Times New Roman 12-point font minimum) The capabilities statement should demonstrate the ability to perform the tasking listed under the required capabilities above and items 1-3 below. The Government prefers responses addressing all stated content below and up above in Required Capability. However, even if all content cannot be addressed, the Government still encourages responses that provide a description of strength areas and is a beneficial contribution. Responding to a subset of the items below: Provide Rough Order of Magnitude: pricing for any required /Integrator capability and platform compatibility at various quantities. Provide a Description: of the potential program organization and resourcing plan addressing any innovative solutions to support a collaborative government-industry partnership. Describe Past Experience: Missile System Integration & Supply Chain Management and Risk Mitigation plan. All responses under this Sources Sought Notice need to request a DODSAFE drop from the designated Contract Specialist, Gregory Walcott, at gregory.n.walcott.civ@army.mil and Contracting Officer Monica Clemons, at monica.e.clemons.civ@army.mil. All responses shall be unclassified. All data received in response to this Sources Sought Notice that is marked or designated as corporate or proprietary will be fully protected from any release outside the U.S. Government (USG). No phone calls will be accepted. All questions must be submitted to the Contract Specialist and Contracting Officer identified above. The USG is not committed nor obligated to pay for the information provided, and no basis for claims against the USG shall arise as a result of a response to this Sources Sought Notice. | Market Research | 336414 | No Set-Aside | 10/14/2026 | 10/30/2026 | Huntsville, AL | |
DISCLAIMER: This solicitation notice is a Formal Request for Proposal (RFP) in accordance with Federal Acquisition Regulation (FAR) 5.201, Solicitation notice. This notice does not constitute a commitment by the United States Government to contract for any supply or service whatsoever. All information submitted in response to this announcement is voluntary; the United States Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the United States Government. Any amendments to this formal RFP will be released on https://sam.gov/. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. The Fort Rucker Aviation Maintenance (FRAM) II contract is anticipated to provide all aircraft maintenance and logistics support associated with Army Aviator training at Fort Rucker, Alabama. | Solicitation | 488190 | No Set-Aside | 10/14/2026 | 10/30/2026 | Fort Rucker, AL | |
The U.S. Army TMDE Activity (USATA) has a requirement to implement a brand name purchase of one (1) Lab Standard Microphone System model or equivalent that will be a suitable replacement for the 4180/4160 Microphones are the main standard for the Acoustics Lab. Three standards have been lost due to damage. Reciprocity calibration requires three microphones of the same model to function appropriately. APSL needs to replace these standards to prevent a potential shutdown of the acoustics laboratory. All accredited parameters within the acoustics lab are tied to these laboratory grade Microphones. The Lab Standard Microphone System shall include the following specifications or equivalent (if not brand name): Requirements: 4180—PTO 1/2" Calibration Condenser Microphone, laboratory standard. Qty: 1 ET-2014-W-002- Primary DPLA Microphone Calibration 1/3 octave frequencies 10Hz to 25 kHz for type 4180 Qty: 1 4160—PTO 1" Laboratory Standard Pressure Microphone, 200V Polarization. Qty: 1 ET-2014-W-001-Primary DPLA Microphone Calibration 1/3 octave frequencies 2Hz to 10kHz for type 4160. Results calculated according to IEC 61094-2:2009/AMD1:2022 Qty:1 AO-0087-D-012- Cable, coax single screen, BNC (M) to BNC (M), 1,2m (4.0ft), max.+85°C (185°F) Qty:1 Shipping Qty:2 Delivery Requirements Shipping Address: U.S. Army TMDE Activity, Attn: Ricardo Gutierrez, Building 5435, Redstone Arsenal, AL 35898 | Awarded | - | No Set-Aside | 10/13/2026 | Open | Redstone Arsenal, AL | |
The purpose of this notice is to post the official solicitation for procurement of the Door (L), Aircraft for the UH-60. Please see attachment for furter details. | Solicitation | 336413 | No Set-Aside | 10/13/2026 | 11/16/2026 | - | |
SUPPLY CHAIN OPTIMIZATION SUPPORT (SCOS) Product Service Code : R706 AMENDMENT 5 - 13 Oct 2026 This amendment updates the Q&A in Attachment 0011. AMENDMENT 4 - 23 Sep 2026 This amendment extends the proposal due date to 16 October 2026 5:00 CST. The responses to the Q&A are uploaded as Attachment 0011. AMENDMENT 3 - 4 Sep 2026 - This amendment extends the proposal due date to 2 Oct 2026 at 5:00 PM CT. Responses to Q&A will be posted in a forthcoming amendment. AMENDMENT 2 - 28 Aug 2026 - Questions for this solicitation are cutoff as of 28 Aug 2026, 5:00PM CT. Questions submitted after the cutoff date/time will not be answered. Questions submitted before the 28 Aug 2026, 5:00PM CT cutoff will be answered and posted on SAM.gov in a forthcoming amendment. The following documents have been updated/uploaded in attachments: Attachment 0001 PWS Performance Work Statement Attachment 0002 Performance Assessment Questionnaire Attachment 0003 CBA HCI - IUOE Local 351 2024-2027 Attachment 0004 WD 2015-5229 Rev29 (05-13-2026) El Paso TX Attachment 0005 PWS Attachment 1_ Appendices A-E Attachment 0006 PWS Attachment 2_Appendix F Attachment 0007 PWS Attachment 3_Appendix G Attachment 0008 PWS Attachment 4_Appendix H (Must be requested per amendment 1) Attachment 0009 PWS Attachment 5_Appendix H (2) (Must be requested per amendment 1) Attachment 0010 PWS Attachment 6_Appendix I (Must be requested per amendment 1) AMENDMENT 1 - 5 Aug 2026 - Updated to extend the proposal due date to 18 Sep 2026 and attach SOW Appendices. Note: Appendix I cannot be posted to sam.gov and, if needed, must be requested via email to the POCs identified on this solicitation. If approved, Appendix I will be delivered via a secure site. Updated 11 Aug 2026 - Appendix H will also need to be requested. It was upload in error. Combined Synopsis/Solicitation Preamble (i) This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) The solicitation number is W31P4Q-26-R-A002 and is issued as a Request for Proposal (RFP). (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Regulation. (iv) Set-Aside Status: 100% Small Business Set-Aside - SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS (SDVOSB) . NAICS Code: 541614 Process, Physical Distribution, and Logistics Consulting Services. (v) Line Items: CLIN 0001: Transition-In - Firm-Fixed-Price (FFP) 12 Months CLIN 1001: SCOS SCA Exempt Labor Missiles - FFP 12 Months. CLIN 1002: SCOS SCA Exempt Labor Overtime Missiles - FFP 12 Months CLIN 1003: SCOS SCA Labor Missiles - FFP 12 Months CLIN 1004: SCOS SCA Labor Overtime Missiles - FFP 12 Months CLIN 1005: Material AWFC Missiles - FFP Not-to-Exceed (NTE) 12 Months CLIN 1006: Travel - Missiles - FFP NTE CLIN 1007: Other Direct Costs (ODCs) Missiles - FFP NTE CLIN 1009: SCOS SCA Exempt Labor Aviation - FFP 12 Months. CLIN 1010: SCOS SCA Exempt Labor Overtime Aviation - FFP 12 Months CLIN 1011: SCOS SCA Labor Aviation - FFP 12 Months CLIN 1012: SCOS SCA Labor Overtime Aviation - FFP 12 Months CLIN 1013: Material AWFC Aviation - FFP 12 Months CLIN 1014: Travel Aviation - FFP NTE CLIN 1015: Other Direct Costs (ODCs) Aviation - FFP NTE CLINs 2001 - 6016: Option Years 1 through 4. (vi) Description of Requirements: The Contractor shall provide logistical management, supply chain analysis, and personnel to support aircraft and missile systems in accordance with the attached Performance Work Statement (PWS). | Combined Synopsis | 541614 | Service-Disabled Veteran-Owned Small Business Set-Aside | 10/13/2026 | 10/16/2026 | Redstone Arsenal, AL |
Additional Details
Solicitation Number
Not available
Archive Date
Oct 15, 2026
Office Address
ROCK ISLAND, IL, 61299-0000