V-22 Infrastructure and Lab Support
Archived on February 19, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM EST
- Posted
- January 20, 2026
- Notice type
- Presolicitation
- NAICS
- 336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAIR.NAVAIR HQS.NAVAL AIR SYSTEMS COMMAND
- Place of performance
- Indianapolis, Indiana
- Last updated
- Nov 5, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N00019-26-RFPREQ-APM275-0027
- Notice ID
- ff9b2542afa44d20bf8b806badc49830
Description
The Naval Air Systems Command (NAVAIR), V-22 Joint Program Office (PMA-275) intends to negotiate and issue a new Delivery Order to Raytheon Company on a sole source basis under Raytheon Basic Ordering Agreement N00019-25-G-0009. The V-22 program (PMA-275) requires engineering, management, technical, acquisition and sustainment efforts for facilitation of the Software Support activities. These activities are required for the sustainment of previously delivered Block Fleet Releases, ongoing development of flight test and fleet releases and analysis leading to implementation of future Sustainment Block Fleet Releases for the V-22 avionics systems. This effort includes providing engineering, management, and technical sustainment efforts for the on-site V-22 laboratories required to plan, develop, release, and sustain the V-22 avionics systems software.
This action is being awarded on a sole source basis to the Raytheon Company in accordance with the statutory authority permitting
other than full and open competition under Title 10 U.S.C. 2304(c)(1), as implemented by FAR Part 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Raytheon is currently under contract for similar efforts for the V-22 program.
The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement. This notice of intent is not a request for competitive proposals. However, any capability statements received within fifteen days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this
proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.
For possible subcontracting opportunities, please contact Zach Phelps at 317.306.3756 or zach_phelps@raytheon.com.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
- 3Version 3PresolicitationArchivedCurrent
V-22 Infrastructure and Lab Support
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Issue Date: 12 November 2026 Closing Date: 27 November 2026 - 2:00 PM ET This notification is connected to previous synopsis and solicitation N0016423RWS68. The purpose of this Request For Information (RFI) is to notify industry of the Government’s intent to announce a forthcoming solicitation via the Procurement Integrated Enterprise Environment (PIEE) module. The announcement will involve rolling admission potential to award additional MAC Indefinite Delivery Indefinite Quantity contracts to Small Business Concerns, as well as a possible ceiling increase from $30M to $120M due to emergent requirements. The Statement of Work (SOW) and scope of the requirement remains unchanged, with the original SOW attached to this RFI for reference. REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT - The Government is issuing this RFI/SS announcement as part of a market research effort on behalf of Crane Division, Naval Surface Warfare Center (NSWC Crane) and is seeking information for market research purposes relative to capabilities available to support the manufacturing of Machine and Composite Parts, along with Additive Manufacturing (3D Printing). These manufacturing efforts will support components related to EA18G Growler and P-8A Poseidon aircraft, as well as various other related platforms. The purpose and objective of this announcement is to find highly qualified fabrication facilities with expertise in the following areas: Precision machining operations such as sawing, grinding, turning, and milling of both metallic and non-metallic materials Welding, fabrication, and assembly of metallic and non-metallic materials and components to produce completed assemblies in accordance with drawings or 3-D models and within the defined tolerances Other various machine shop services including, but not limited to, water jet cutting, plasma & laser cutting, hot and cold forming, tool & die fabrication, as well as inspection & certification. Composite capabilities such as autoclave operations, prepreg and wet lay-up operations, grinding, sanding, patching/repair work, debulking, testing, and certification of materials and adhesives. Additive Manufacturing capabilities that include 3D printing of various polymer and metal components, and the ability to document the process. Interested parties are strongly encouraged to submit an initial synopsis (commonly referred to as “white paper”. This white paper should not exceed 20 pages written (Times New Roman, 12 font) or MS PowerPoint slides, (excluding supporting information such as commercial literature, catalogues, manuals, vendor’s current equipment list, responses to Government’s market research questions, etc.), with an executive summary (one page or less) on their capabilities. A draft Statement of Work is provided as an Attachment to aid interested sources in understanding the scope of work that may be executed under this potential procurement. Contractors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov. This announcement does not constitute an Invitation for Bids (IFB), a Request for Quote (RFQ), or a Request for Proposal (RFP) and it should not be construed as a commitment of any kind by the Government to issue a formal solicitation or ultimately award a contract. The U. S. Government is in no way liable to pay for or reimburse any companies or entities that respond to this announcement. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed. Any information provided that is marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities. The Government may elect to visit, or host a visit, from any potential sources following the market survey. Your interest in this program is appreciated. Responses from Small and Small Disadvantaged Business firms are highly encouraged. Firms responding should indicate if they are a small business, a socially and economically disadvantaged business, 8(a) firms, historically black colleges or universities, and minority institutions. Responses to the RFI shall include the following: Submitter's Name Street Address, City, State, nine (9) digit Zip Code Point of Contact (POC) POC Telephone and facsimile numbers Announcement Number: N0016427SNC15 Unique Entity Identification number Current CMMC level in accordance with 252.204-7025 Notice of Cybersecurity Maturity Model Certification Level Requirements White papers and/or any associated questions may be submitted any time prior to expiration of this announcement, but shall be received by the Government no later than the closing date and time 27 November 2026 at 2:00PM ET. Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their responses. The Government will not be liable, or suffer any consequential damages, for any proprietary information not properly marked and clearly identified. Proprietary information received in response to this RFI/SS will be safeguarded and handled in accordance with applicable Government regulations. In addition, if responses include technical requirements that have been identified as CUI in accordance with NIST SP 800-171, the documents shall be identified with the appropriate category markings. See https://www.archives.gov/cui/registry/category-marking-list for guidance. All information received in response to this notice that is marked proprietary will be handled accordingly. NSWC Crane makes no implied or in fact contracts by issuing this RFI. Acknowledgement of receipt of responses will not be made, nor will respondents be notified of the NSWC Crane’s view of the information received. Do not send any material that requires a non-disclosure agreement or identify information that is business sensitive. Responses to this notice will not be returned. All information provided becomes U.S. Navy property and will not be returned. Your interest in this response is appreciated. Electronic submissions only, no hard copy submissions will be accepted. Electronic submissions regarding this announcement may be directed to Ms. Shannon Reinhart, Phone: (812) 381-7166, E-mail: shannon.l.reinhart.civ@us.navy.mil. Please refer to announcement number N0016427SNC15 in all correspondence and communication. | 69% | Market Research | 11/27/2026 |
1 PROGRAM BACKGROUND: This sources sought is issued by the Naval Air Systems Command (NAVAIR), Patuxent River, MD. The U.S. Marine Corp (USMC) and U.S. Navy Reserves (USNR) Tactical Air Lift Program (KC-130J Aircraft) PMA-207 is conducting a market survey of industry to determine potential interested sources that can provide In-Flight Refueling (IFR) aircraft pods, pods parts, fuse tank parts and equipment manufacturing; associated equipment including spares, repair parts, support equipment, technical manuals, training; and logistical engineering and field technical support. This market research tool is being used to identify potential and eligible vendors of all sizes, prior to determining the method of acquisition and issuance of a solicitation. Responses will also be utilized by the Government for market research purposes in developing its acquisition/contracting strategy. All interested parties must be registered in the System for Award Management (SAM) government website at www.sam.gov to be eligible for award of Government contracts. This sources sought is used as a market research tool pursuant to Federal Acquisition Regulations (FAR) Part 10 to determine potential sources and their technical capabilities. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code currently assigned to this procurement is 336413 – Aircraft Auxiliary Parts. The product service code (PSC) is 1680 - Miscellaneous Aircraft Accessories and Components. In-Flight Refueling parts/equipment is currently employed on USMC and USNR C-130 aircraft and meets System Performance Specifications for the KC-130J Tanker Aircraft, Model 382U-UUS-93, dated 23 March 2012. The Government does not have the sufficient data rights from the Original Equipment manufacturer to provide a technical data package to manufacture the required parts. All businesses that can meet the requirements of the specification are encouraged to respond. DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND MUST NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. Any resultant solicitation(s) will be released on the SAM government website. It is the responsibility of the potential offerors to monitor SAM for additional information as the direct method of communication with the Government. 2. SCOPE: The Government requires responses to this Sources Sought to be focused on the parts/equipment to be manufactured. Capable vendors must be able to manufacture and provide the parts/equipment listed below. P/N NOMENCLATURE Hose End Fitting 149C5007-1 Spring Seat 233-5011-2 Bumper Assy 149B5019 Pressure Regulator 6315-2 Drogue Tube 149D6050-4 Reception Coupling 60381-4 / 61520-4 Guillotine 149D6009-102 Ring 149B5030 Surge Suppressor 401702-1 Adapter, Coupling 149B5006 Hose Reel 149R1050-110 Ejection Spring 149-5079 Retaining Wire 149A5008 Ring Assy 227-5020 High Speed Para drogue 149D5047-3 Aerial Refueling Pumps 6300-10 Boost Pump/ Transfer Pump 60-371C Tail Cone Assembly 440080-1 Fuel Level Control Valve 4-1058-201 Capable Vendors must be able to provide the following: Potential training for installation and maintenance of the parts; Logistical support for shipping and inventory tracking; Engineering support to ensure the required parts conform to the specifications; and Field technical support to assist with troubleshooting during installation. 3. Sources Sought Respondent Instructions 3.1 The capabilities statement must include the following: The capability statement must describe the ability to obtain the technical data necessary to manufacture C-130J In-Flight Refueling parts and equipment. 3.2 Specific Sources Sought Information Requested Provide points of contact for existing or previous customers; Summary of successful operational experience in manufacturing, sustaining engineering to ensure the parts conform to the requirements; Summary of logistics support offered to include inventory tracking for shipping; Estimated timeline to obtain the required technical data, manufacture and delivery of parts; Ability to provide training for the use, repair, and maintenance of these parts/equipment; Describe engineering and/or logistical support that can be provided for the use and/or repair of these parts/equipment; Describe field technical support that can be provided for the use and/or repair of these parts/equipment; Provide company designation as a small business, large business, 8(a), etc.; and Provide the North American Industry Classification System (NAICS) code or Product Service Code (PSC). 4. ELIGIBILITY: The applicable NAICS code currently assigned to this procurement is 336413 – Aircraft Auxiliary Parts, and the Product Service Code (PSC) for this requirement is 1680 – Miscellaneous Aircraft Accessories and Components. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. SUBMITTAL INFORMATION (CAPABILITIES STATEMENT) Interested parties must adhere to the following instructions for the submittal of their capabilities statements. Page Limit and Format: A maximum of a two (2) 8.5 X 11 inches pages in Times New Roman font not less than 10 point. Document Type: Microsoft Word (2016) or Adobe PDF format. Delivery: Electronic submission within SAM.gov Sources Sought Notice Response date: Responses are due by 3:00 PM Eastern Daylight Time (EDT) 01 December 2026. No classified information shall be submitted in response to this Sources Sought. No telephone calls will be accepted. All questions must be submitted via email to the POCs listed at the end of this notice All responses must include: Sources Sought Notice name/number Company Name CAGE code Unique Entity Identifier (UEI) Company Address Company Business Size: Large business or qualify as a Small Business (SB), Small Disadvantaged Business (SDB), Women-Owned Small Business (WOSB), HUBZone Small Business (HUBZone), Veteran-Owned Small Business (VOSB), or Service-Disabled Veteran-Owned Small Business (SDVOSB) Concern. Points of Contact (POC), including names, phone numbers, and email addresses. 8. All data received in response to this Sources Sought Notice that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Please mark all documentation with the appropriate distribution statements, if applicable. Contractors should appropriately mark any data that is proprietary or has restricted data rights. 9. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. RESPONSES: Interested businesses must submit responses by email to the Contract Specialist, Ms. Stephanie Baker (stephanie.m.baker30.civ@us.navy.mil). The capability statement package should demonstrate the respondent’s ability to provide the requirements as listed above. CONTRACT SPECIALIST Name: Stephanie Baker Email: stephanie.m.baker30.civ@us.navy.mil CONTRACTING OFFICER Name: Shawn Campbell Email: shawn.campbell.civ@us.navy.mil In addition, please send an electronic copy of responses to: tracy.a.burrows2.civ@us.navy.mil | 68% | Market Research | 12/01/2026 |
The Naval Air Systems Command (NAVAIR), V-22 Joint Program Office (PMA-275) intends to negotiate and issue a delivery order under a Basic Ordering Agreement to the Bell Boeing Joint Program Office, 401 Tiltrotor Drive, Amarillo, TX 79111 on a sole-source basis for: The V-22 FCS Enhanced Capability will include the following safety and capability-driven technology improvements to the aircraft: Level I handling qualities in critical mission tasks, tactile cueing of aircraft operating limits, and Hands-On Throttle and Stick (HOTAS) control of FCS modes. This action is being awarded on a sole source basis to the Bell Boeing Joint Program Office in accordance with the statutory authority permitting other than full and open competition under Title 10 U.S.C. 2304(c)(1), as implemented by FAR Part 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Bell Boeing is the sole designer, developer, and producer of the V-22 Tiltrotor aircraft and is the only known source that possesses the requisite knowledge and expertise required to perform this effort. Also, Bell Boeing is the only source that possesses the totality of engineering and technical data required to perform these efforts. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement. This notice of intent is not a request for competitive proposals. However, any capability statements received within fifteen days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. For possible subcontracting opportunities, please contact Jen McKeon at jennifer.m.mckeon@boeing.com or Shari Askew at supplierdiversity@bh.com | 68% | Combined Synopsis | 11/20/2026 |
The Naval Air Systems Command (NAVAIR) intends to negotiate and award an order under the to-be-negotiated Basic Ordering Agreement (BOA) N0001927G1005 to General Atomics-Aeronautical Systems, Inc. (GA-ASI), for development, modification and integration of the Cloudsurfer pod (CSP) in the “MQ-9A MUX MALE UAS.” (Reaper Marine Air Ground Task Force Expeditionary (MUX) Medium Altitude Long Endurance (MALE) Unmanned Aerial System (UAS)). GA-ASI will serve as the prime system integrator and will coordinate with subcontractors to integrate the CSP capability. The CSP order requires recurring and non-recurring engineering, investigations, analyses, surveys, and studies; training and associated support; hardware and support equipment, including kits, consumables, materials, spares, and repair parts; programmatic, engineering, logistics, and other technical support. Award of this action is required by September 2027. For this proposed contract action, the Government intends to solicit and negotiate with only one source under the authority of 10 U.S.C. 3204(a)(1) and FAR 6.103-1, "Only One Responsible Source and No Other Supplies or Services will Satisfy Agency Requirements." GA-ASI is the sole designer, developer, manufacturer, and integrator of the MQ-9 unmanned aircraft, and therefore is the only contractor with the requisite knowledge, experience, and technical data that can meet the Government’s requirements on a timely basis and in a cost-effective manner. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. Interested parties, however, may identify their interest and capability by responding to the requirement. The Government will consider all information received prior to the closing date of this synopsis. Information received will be considered solely for determining whether to conduct a competitive procurement. A determination by the Government not to compete the proposed contract modification based upon responses to this notice is solely within the discretion of the Government. No phone inquiries will be entertained. Responses shall be made in writing to the attention of Tiffany Horty using the contact information provided in this synopsis. Companies interested in subcontracting opportunities should contact GA-ASI directly at GA-ASISmall-Business@ga-asi.com. | 68% | Combined Synopsis | 12/05/2026 |
The Naval Air Systems Command (NAVAIR) intends to negotiate and award a Sole Source Delivery order under and pursuant to the terms and conditions of Basic Ordering Agreement (BOA) N0001923G0002 to Lockheed Martin Rotary and Mission Systems (LM RMS) in Owego, NY for the procurement of airframe structural modification, replacement, and avionics wiring harness kits in support of the MH-60S Service Life Extension Program (SLEP). The SLEP addresses specific USN MH-60S aircraft system/components that are not forecasted to meet current service life requirements. The projected period of performance for this requirement forty-eight (48) months from contract award. This action is intended to be awarded on a sole source basis to Lockheed Martin Rotary and Mission Systems (LM RMS) under the authority permitting other than full and open competition, Title 10, U.S.C. 3204 (a)(1), as implemented by Revolutionary FAR Overhaul (RFO) 6.103-1, "Only One Responsible Source and No Other type of Supplies or Services Will Satisfy Agency Requirements." LM RMS is the sole designer, developer, systems integrator, and manufacturer of the MH-60S aircraft and weapon system and, as such, is the only source with the requisite knowledge and skilled personnel, facilities, manufacturing tooling, test equipment, experience, and technical data necessary to provide the required supplies and services. Note: This notice of intent is not a request for competitive proposals. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of Federal Acquisition Regulation 6.103-1. The Government does not intend to fund the development or qualification of other sources for fulfilling this requirement, as production for the supplies listed requires a substantial initial investment or an extended period of preparation for manufacture. However, the Government will consider all proposals received within fifteen (15) days after the publication of this synopsis. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Questions concerning subcontracting opportunities should be directed to Jim Boulay at jim.s.boulay@lmco.com Lockheed Martin Rotary and Mission Systems, 1801 State Route 17 C, Owego, NY 13827. | 68% | Pre-Solicitation | 11/14/2026 |
Additional Details
Solicitation Number
N00019-26-RFPREQ-APM275-0027
Archive Date
Feb 19, 2026
Office Address
PATUXENT RIVER, MD, 20670-5000