GovChime
Notice ID: 96355509f3034bf8bcd5fe5b8ad3e8a3Sources Sought

Specialized Systems Engineering Experience in Terminal Area Sensors and Conventional Hypersonic Environments

Archived on October 10, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−04:00
Posted
September 23, 2020
Notice type
Sources Sought
Agency
Department of WarDepartment of the Navy

Notice details

Office
STRATEGIC SYSTEMS PROGRAMS
Place of performance
Washington Navy Yard, DC, 20374
Last updated
Apr 29, 2026

Identifiers

Solicitation number
N0003021R1025
Notice ID
96355509f3034bf8bcd5fe5b8ad3e8a3

Description

Sources Sought for Specialized System Engineering Experience Relating to Underwater Launched Hypersonic Missile Systems Introduction Conventional Prompt Strike (CPS) Program Office, a division of Strategic System Programs (SSP), under the Department of the Navy, is currently conducting market research to identify potential and eligible vendors capable of fulfilling engineering expertise relating to underwater launched hypersonic missile systems. Additional details pertaining to these requirements are in Section "Requirement" below. Interested parties are encouraged to provide responses to any or all requirement categories for which they may have capability. Disclaimer This notification is intended for planning purposes only and issued solely for conducting market research in accordance with FAR 10. This does NOT constitute a Request for Proposal. The Government is NOT seeking or accepting unsolicited proposals. This notice shall not be construed as a contract, a promise to contract, or a commitment of any kind by the Government. This is for market research only. The procurement method and/or vehicle has also not been determined. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. Any interested parties that are small businesses that believe they can accomplish this entire requirement or any portion herein should indicate their small business status (see FAR Part 19) in their capability statement. If a solicitation is released, it will be synopsized on the Federal Business Opportunities (FedBizOpps) website. It is the responsibility of interested parties to monitor FedBizOpps for additional information pertaining to this requirement. Security and Other Special Guidelines Secret level clearance required. Up to Top Secret clearance may be required for some positions. Requirement The aforementioned support includes and requires the following: Programmatic and technical expertise in analyzing and supporting flight test terminal sensor system, safety, and test program development. Experience in analyzing and leading the development of raft deployed terminal sensor systems with Lawrence Livermore National Laboratory in expanding the capabilities of current sensors in gathering critical data on missile tests. Systems engineering expertise specific to analyzing and assessing effects of environmental risk factors in the performance of Conventional Weapon Systems (CWS) to include Anti Tampering initiatives and program protection efforts. Experience with integration of CWS into SSGNs including software and electrical interfaces. Also requires Large Diameter Underwater Launch System experience in electrical support and electrical integration to support an Independent Review Panel. Response Criteria Companies responding to this announcement shall provide a capability statement not to exceed two (2) pages per labor category or fourteen (14) pages total if providing responses to all categories. Cover Sheet, Table of Contents, and List of Abbreviations and Acronyms are exempt from the page limit. A detailed proposal is not requested. Responses should indicate sufficient detail for assessment of potential interest; submissions should be organized as follows: - Cover Sheet: title, address, company, technical point of contact, with printed name, title, email address and date, cage code, and NAICS codes. - Table of Contents: with list of figures and tables with page numbers as needed. - Capability Statement: Please address each staffing requirement separately. For each requirement addressed please provide specifics in regards to the capability to perform/deliver; specifics addressing subject matter expertise of similar programs; related past performance; and general corporate information. Interest parties are also welcome to provide any additional NAICS codes for these requirements. Formatting Submissions shall be single spaced, typed or printed in Times New Roman font with type no smaller than 12-point font. Paper should be 8 1/2 x 11 inches with a minimum of 1 inch margins around the page. Any text contained within tables, graphs, etc. should be 8-point Times New Roman font or larger. Included files should be created/prepared using Microsoft Office compatible applications. Graphics, photographs, and other data that may not be compatible with Microsoft Office should be submitted in Adobe Acrobat format. Submitted electronic files should be limited to the following extensions: .docx Microsoft Word, .xlsx Microsoft Excel, .pptx Microsoft Power Point, or .pdf Adobe Acrobat. Response Deadlines CPS/SSP will accept ONLY electronic unclassified submission of responses. The due date for responses is seventeen (17) calendar days from the date of this posting to Andrey Grabovetskiy at Andrey.Grabovetskiy@ssp.navy.mil. All responses shall be submitted by 012:00 p.m. Eastern time on 25 September 2020.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N0003021R1025
  1. Market Research

Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)

  1. 3×
    Market ResearchCurrentSep 8, 2020

    Specialized Systems Engineering Experience in Terminal Area Sensors and Conventional Hypersonic Environments

    Notice 96355509f3034bf8bcd5fe5b8ad3e8a3 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Portfolio Acquisition Executive (PAE) Strategic Systems Programs (SSP) awarded a Task Order N00030-27-F-3022 under the Small Business Innovative Research (SBIR) Phase III Indefinite Delivery Indefinite Quantity (IDIQ) contract N00030-25-D-3019 to Systems Planning and Analysis, Inc. (Cage: 7L563) located at 2001 N Beauregard St Alexandria, VA 22311-1739 in support of Technical Studies & Assessments, Systems Engineering (SE) and Analysis Support, and Technical Engineering Services for various missiles such as the D5LE2, W93/Mk7, Future Strategic Sea-Based Warhead (FSSW), and Accuracy Improvement Program (AIP). The awarded task order contains a base period effort for Fiscal Year (FY) 2027 and includes four (4) one-year option periods, FYs 2028, 2029, 2030, and 2031. The awarded task order contains Level-of-Effort (LOE) Line Items on a Cost-Plus-Fixed-Fee (CPFF) basis. Each LOE line item includes an option provision to increase the LOE up to thirty percent (30%), in accordance with PAE SSP terms and conditions. The award effective date for this action is 01 October 2026.
75%
AwardedOpen
J&A_N0003026C3007_Redacted
66%
Sole Source / J&AOpen
REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT ANNOUNCEMENT DEPARTMENT OF THE NAVY Program Acquisition Executive Mission Systems (PAE MS) Capability Portfolio Executive Combat Systems & Fires (CPE CS&F) Integrated Combat System (ICS), PMW 630 SECTION 1: GENERAL INFORMATION Document Type: Request for Information (RFI) / Sources Sought Notice Solicitation / Reference Number: N6175027R1201 Contracting Activity: Navy PAE Mission Systems, Washington Navy Yard, DC Program Title: Surface Ship ICS Engineering and Integration North American Industry Classification System (NAICS) Code: 541330 – Engineering Services (Military and Aerospace Equipment and Military Weapons) Product Service Code (PSC): AC13 – R&D: Defense Systems: Weapons / R425 – Support - Professional: Engineering/Technical Response Due Date: 04 December 2026, 15:00 EST Classification Level: Primary document UNCLASSIFIED. Classified responses or annexes up to SECRET / NOFORN handled by separate coordination (see Section 7). SECTION 2: STATUTORY DISCLAIMER & SPECIAL NOTICE This RFI is issued solely for information and planning purposes in accordance with FAR 15.101(c). This notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or an announcement of a forthcoming solicitation. Issuance of this notice does not obligate the Government to issue a formal solicitation or award a contract. The Government will not pay or reimburse any costs incurred by respondents in preparing, submitting, or demonstrating information in response to this notice. All submissions become Government property and will not be returned. Participation in this RFI is voluntary. Failure to respond will not preclude a vendor from participating in any future competitive acquisition, should one be released. Respondents may submit capability statements addressing any subset or all of the focus areas detailed herein. SECTION 3: BACKGROUND & PROGRAM CONTEXT 3.1 Background & Context Modern surface warfare requires rapid, modular capability delivery across the Navy's surface fleet. The Navy’s ICS program is making this vision a reality through use of virtualization, Kubernetes orchestration, and development of a common suite of mission applications enabling a "build once and deploy across the fleet" methodology for delivery of capability to frigates, destroyers, amphibious ships, aircraft carriers, future manned and unmanned vessels, and future foreign military sales vessels. The ICS program is conducting market research to identify industry partners capable of executing comprehensive systems engineering and software integration for U.S. Navy surface combat systems. This scope is currently being executed under the N00024-23-C-5117 contract awarded to Lockheed Martin Rotary & Mission Systems in September 2023. 3.2 Technical Scope & Baselines The technical scope spans current and next-generation baseline configurations running incremental deliveries of the Integrated Combat System (ICS) software stack (infrastructure services and tactical platform services) and common mission applications. Applicable ship deliveries include the following: ICS-Enabled AEGIS Combat System Baselines 9.C3+ and Baseline 10.1+ running on Mk6 Mod0/1 hardware with IaaS ORDALT or on Mk6 ModX hardware ICS-Enabled Ship Self-Defense System (SSDS) platforms FF(X) 3 and follow DDG 1000 class in line with delivery of the Zumwalt Enterprise Upgrade Solution (ZEUS) Future USN and FMS platforms SECTION 4: TECHNICAL REQUIREMENTS & CAPABILITY AREAS SOUGHT The Navy seeks detailed technical capabilities, corporate competencies, and innovative methodologies across eleven (11) functional areas. Vendors may respond to any or all of the following scope areas: Focus Area 1: Programmatic Engineering, Configuration Management & Governance Configuration Management (CM): Formulating, baselining, and executing Configuration Management Plans (CMP), software build/release planning, Configuration Control Boards (CCBs), and tracking and adjudicating Software Change Requests (SWCRs). Programmatic & Systems Planning: Developing, maintaining, and synchronizing project-level Roadmaps, Integrated Master Schedules (IMS), and capability delivery cadences. Focus Area 2: Systems Engineering & Requirements Architecture Technical Baseline Artifacts: Developing, updating, and managing formal engineering artifacts: Systems Engineering Plans (SEP). Software Development Plans (SDP) utilizing modern Agile/DevSecOps frameworks. System / Subsystem Definition Documents (SSDD). System / Subsystem Specifications (SSS). Software Product Specifications (SPS). Interface Requirements Specifications (IRS). Requirements Traceability Verification Matrices (RTVM) maintaining end-to-end bidirectional requirement-to-test traceability. System Safety Plans (SSP) conforming to MIL-STD-882E and naval weapon safety requirements. Requirements Allocation: Decomposing ICS, AEGIS, SSDS, and future combat system Top Level Requirements (TLR) into modular capability building blocks and subsystem specifications across surface ship classes (DDG 51, CG 47, FF(X), DDG 1000, L-Class, CVN, unmanned surface vessels, FMS variants, future platforms). Technical Leadership: Serving as lead technical authorities in Integrated Product Teams (IPTs), Working Groups (WGs), formal milestone reviews (SRR, PDR, CDR), and leading Technical Interchange Meetings (TIMs) to define and allocate interface requirements. Force-Level Mission Thread Analysis: Evaluating complex, distributed kill-chain mission threads, establishing functional allocations, and resolving tactical latency challenges. ICS Re-Architecture & Model-Based Systems Engineering (MBSE): Authoring SysML/UML MBSE models and leading modular product development across the ICS Domain Architecture. Sensor Management. Vehicle Management. Information Management. Training Management. Tactical Decision Management. External Communications Management. Weapon Management. Display Management. Infrastructure Services. Focus Area 3: Fleet Data Analysis, Feasibility Studies & Gap Assessment Conducting engineering feasibility studies, system performance assessments, and trade studies for capability insertion across diverse ship classes and configurations. Extracting, parsing, and analyzing live fleet exercise data, weapon telemetry, and real-world tactical events to identify performance anomalies and drive capability enhancement. Assessing combat system shortfalls, bottlenecks, and operational gaps, and designing/evaluating candidate architectural and software modifications to close these gaps. Focus Area 4: Tactical Software Design, Coding, Testing, and Integration Combat System Design activities including analysis and algorithm development Mission software development, unit testing, and component integration. Cloud-based and Hardware-in-the-Loop (HWIL)-based testing to include element integration, subsystem testing, and system testing System Integration: Engineering and integrating software interfaces for specific sensor, weapon, and C2 programs and capabilities, including but not limited to: Patriot Advanced Capability-3 Missile Segment Enhancement (PAC-3 MSE) The Standard Missile (SM) Family of weapons (including all Air Defense, Ballistic Missile Defense, and Extended Range Active Missile variants) MK-41 VLS-compatible canister-launched weapons (including Evolved SeaSparrow Missile (ESSM), Tomahawk Land Attack Missile (TLAM), and Vertical Launch ASROC (VLA) Rolling Airframe Missile (RAM) Electronic Warfare (EW) systems Phased array and rotating radar systems Evolving to common track management solution across AEGIS and SSDS configurations Containerized payloads Tactical Virtualization Configurations: Designing, provisioning, benchmarking, and troubleshooting virtualized tactical hardware/software configurations and hypervisor-to-bare-metal runtime environments. Focus Area 5: Hardware/Software Tech Stack, Microservices & System-of-Systems Integration Third-Party Software & Microservices: Evaluating commercial and third-party software products, conducting compliance refactoring, and defining standardized, ICS-compliant APIs to support microservices orchestrated via Kubernetes. Hypervisor Integration: Integrating and tuning alternate hypervisors (e.g., VMware ESXi, KVM, bare-metal container engines) to meet strict real-time deterministic performance requirements. Full-Stack System-of-Systems (SoS): Ensuring the integrated tech stack (hardware compute blades, switching fabric, hypervisors, orchestrators, microservices, and tactical applications) fulfills holistic combat system operational requirements. Leading technical forums to establish cross-contractor deliverable interfaces, lead-ship integration agreements, and deployment schedules. Focus Area 6: Modeling & Simulation (M&S) Developing, maintaining, validating, and updating high-fidelity simulations and functional simulators. Conducting system-level, ship-level, and force-level performance simulations, radar cross-section/propagation trade studies, and engagement dynamics modeling to validate tactical algorithms. Focus Area 7: Cybersecurity Engineering, IA & Program Protection Cyber Systems Engineering: Refactoring heritage combat system code to contemporary cybersecurity baselines, integrating modern defensive cyber tools, and ensuring zero loss of tactical capability during cyber retrofits. Information Assurance (IA) Compliance: Enforcing DoD, DoN, and NAVSEA security policies; documenting DoD Instruction (DoDI) 8510.01 Risk Management Framework (RMF) security controls. Model-Based ATO & Cross Domain Solutions: Supporting technical reviews and data calls for Cross Domain Solutions (CDS); driving the transition to model-based RMF Authorization to Operate (ATO) artifact generation. Vulnerability Scanning & Red Team Support: Executing continuous vulnerability management (ACAS, SCAP), static/dynamic code analysis (e.g., SonarQube, Fortify), supporting Red Team assessments, and implementing automated STIG remediation workflows. Program Protection & Fleet Readiness: Authoring Program Protection Plans (PPP); identifying fleet cyber operational and response training shortfalls and recommending tooling enhancements; leading Cyber TIMs with Participating Acquisition Resource Managers (PARMs). Focus Area 8: Verification, Validation & Automated Testing Automated Test Architecture: Authoring test strategies, detailed verification plans, and scripts emphasizing automated testing across unit, component, capability, and system levels. Multi-Tier Testing Execution: Executing and supporting testing to include unit/component testing, integration testing, multi-element integration testing, regression testing, stability testing, functional, system test and evaluation, and fleet acceptance testing. Certification & Maintainability: Supporting government-led maintainability evaluations. Defining, capturing, and verifying Objective Quality Evidence (OQE) to support formal combat system certification. Defect Adjudication: Verifying software problem resolutions and supporting hardware failure reporting, analysis, and corrective action systems (FRACAS / Trouble Reporting). Focus Area 9: Land-Based Test Site & Shipboard Installation Support Land-Based Test Site (LBTS) Engineering: Providing on-site systems engineering, software loading, and live test support at locations including the Combat Systems Engineering Development Site (CSEDS) in Moorestown, NJ; and Surface Combat Systems Center (SCSC) in Wallops Island, VA. Major Test Events: Preparing for and executing critical test events at land-based ranges and on underway ships. Shipboard Installation: Executing shipboard installation across naval shipyards and bases, including software infrastructure installation, tactical software installation, network configuration, interface checkout, and combat system light-off. Focus Area 10: Fleet Training Systems & Instructional Design Performing Job Duty Task Analysis (JDTA) and Front End Analysis (FEA) to define sailor instructional requirements for modernized tactical systems. Developing, maintaining, and updating training curricula, student guides, and tactical job aids. Executing and coordinating factory, pilot, and schoolhouse training courses across Surface Combat Systems Training Command (SCSTC) locations. Focus Area 11: Technical Documentation & Interactive Manuals (IETMs) Modernizing traditional technical publication pipelines toward dynamic, S1000D-compliant Interactive Electronic Technical Manuals (IETMs) and Quick Reference Guides (QRGs). Providing technical writing support to translate complex software architectures and engineering data into standard operating procedures and maintenance manuals. Investigating, adjudicating, and incorporating fleet-submitted Technical Manual Deficiency / Evaluation Reports (TMDERs). SECTION 5: INSTRUCTIONS TO RESPONDENTS & QUESTIONNAIRE Interested industry partners are requested to submit responses organized into the following four (4) distinct parts: Part 1: Corporate Profile & Administrative Information (Max 3 Pages) Administrative Data: Company Name, Commercial and Government Entity (CAGE) Code, Unique Entity Identifier (UEI), physical address, website, and designated Points of Contact (POC) for technical and contractual matters. Business Size & Socioeconomic Status: Business classification under NAICS 541330; small business designations (e.g., Small Business, 8(a), HUBZone, SDVOSB, WOSB). Facility & Personnel Clearances: Current Facility Security Clearance (FSL) level; Secret/Top Secret safeguarding capability; availability of cleared key personnel. Existing Contract Vehicles: Active prime contracts (e.g., SeaPort-NxG, GSA OASIS/MAS, or agency-specific MACs) suitable for this scope. Part 2: Technical Approach, Scope Competency & Innovation (Max 25 Pages) Respondents must address their specific competencies, technical approaches, and innovative capabilities against the requirements in Section 4. Vendors may respond to any or all of the functional areas. Scope Coverage & Technical Competency: Clearly delineate which of the eleven (11) Focus Areas your organization has the core capability to execute (as a prime or via teaming). Detail your technical approach, corporate experience, and past performance (within the past 5 years) supporting AEGIS, SSDS, ICS re-architecture, modern weapon and sensor integration, and other real-time / mission-critical engineering and integration efforts. Super Intelligence (SI) & Advanced Automation Integration: Describe your organization's specific technical approach to utilizing SI and generative/agentic tools. Provide concrete examples or proposed concepts where SI can be applied across the lifecycle—such as automated test script generation and test execution, automated code refactoring, telemetry and fleet data anomaly detection, MBSE artifact generation, cyber vulnerability triage/STIG scanning, or dynamic IETM/training curriculum updates. Virtualization Experience: Detail your experience deploying workloads in virtualized and Kubernetes- orchestrated environments; abstracting hardware dependencies; and integrating mission critical software in environments demanding high reliability and low latency. Part 3: Industry Barriers to Entry & Risk Identification (Max 5 Pages) The Navy is committed to fostering competition, removing friction, and accelerating delivery timelines. Respondents are requested to identify: Technical & Resource Barriers: Identify key barriers to entry, technical hurdles, or constraints that may prevent your firm from successfully performing any of the 11 focus areas identified above, within required delivery timeframes (e.g., specialized software/hardware tool access, facility/lab access, proprietary interfaces, legacy codebase familiarity). Government Furnished Information / Property / Computer Programs (GFI/GFE/GFCP): Specific GFI, GFE, GFCP; developer environment credentials; test facility availability required to de-risk onboarding and ensure parity. Personnel & Security Bottlenecks: Security clearance onboarding latency, specialized labor skill shortfalls, or site access restrictions that present schedule risks, along with suggested government mitigation strategies. Part 4: Acquisition Strategy, Contract Structuring & ROM (Max 7 Pages) Contract Type & Structuring Recommendations: Provide industry perspectives and recommendations on optimal contract type (e.g., Cost-Plus-Fixed-Fee, Cost-Plus-Incentive-Fee, Firm-Fixed-Price) and acquisition approach (e.g., Other Transaction Authority (OTA), FAR-based contract, Multiple Award Contract Indefinite Delivery / Indefinite Quantity (MAC IDIQ)). Additionally, address how technical scope could be performed under fixed-price, outcome-based contract line items, along with any perceived risks and tradeoffs of this approach. Discuss how Contract Line Item Numbers (CLINs) or Task Areas should be structured to balance agile, iterative software delivery to Fleet with traditional milestone-driven waterfront installations and systems engineering documentation. Recommend incentive structures (e.g., award fees tied to automated test coverage, escaped defect reduction, or schedule acceleration) that align industry motivation with Navy operational velocity. Teaming & Subcontracting: Proposed teaming arrangements, joint ventures, or specialized subcontractors to cover the multi-disciplinary scope. SECTION 6: SUBMISSION GUIDELINES Format: Submissions must be delivered in searchable Adobe PDF or Microsoft Word format. Standard 8.5 x 11-inch layout, 1-inch margins, minimum 11-point font (graphics, tables, and architectural diagrams may use minimum 9-point font). Total submission must not exceed 40 pages across all four parts (excluding Title Page, Table of Contents, and Acronym Table). Delivery Instructions: Responses must be submitted via email to the Contracting Officer and Contract Specialist listed below with the subject line: "Response to RFI [N6175027R1201] - Surface Combat Systems Engineering and Integration - [Company Name]". For attachments exceeding 10MB, respondents must coordinate secure file delivery via the DoD SAFE application (https://safe.apps.mil/). Submission Deadline: All responses must be received no later than 04 December 2026, 15:00 EST. SECTION 7: PROPRIETARY MARKINGS & SECURITY HANDLING Proprietary Markings: If a response contains business-sensitive, trade secret, or proprietary information, it must be explicitly marked on each page. The Government will protect properly marked data from unauthorized disclosure. Non-Government Evaluators: The Navy may utilize Federally Funded Research and Development Centers (FFRDCs) and System Engineering and Technical Assistance (SETA) contractors to assist in reviewing responses. All support personnel are bound by non-disclosure agreements (NDAs) and organizational conflict of interest (OCI) rules. Respondents wishing to establish proprietary information agreement(s) with non-Government evaluators must clearly declare this in their Part 1 submission. Responses must be UNCLASSIFIED. SECTION 8: GOVERNMENT POINTS OF CONTACT Contracting Officer: Name: Ryan Brophy Email: ryan.p.brophy.civ@us.navy.mil Command: Navy PAE Mission Systems Contract Specialist: Name: Ashley Mathew Email:ashley.mathew2.civ@us.navy.mil Command: Navy PAE Mission Systems Program Office Representative: Name: Rick Jandrain Email:richard.r.jandrain.civ@us.navy.mil Command: Navy PAE Mission Systems, PMW 630
61%
Market Research12/04/2026
Code 75 Engineering Services
57%
Solicitation09/28/2026
1) INTRODUCTION AND PURPOSE: NAWCWD is seeking technically competent sources for engineering services in support of Test and Evaluation (T&E) and systems engineering activities related to Aegis Ballistic Missile Defense (BMD) and Theater High Altitude Area Defense (THAAD) programs at Pacific Missile Range Facility (PMRF). The purpose of this sources sought is to determine what companies are capable of providing the required services in a competitive procurement and to gain market knowledge of potential qualified sources and their size classifications relative to the North American Industry Classification Systems (NAICS) code 541330 for Engineering Services which has a corresponding size standard of $47 million. Responses to this sources sought synopsis will be utilized by the Government to determine the best acquisition strategy for this procurement and make appropriate determinations about potential sources. No solicitation is currently available and as such this is not a request for proposal and in no way obligates the Government to award any contract. A decision to set aside all or part of this requirement is dependent upon a review of the information submitted in response to this sources sought. After review of responses to this sources sought, a synopsis and/or solicitation announcement may be published. (2) PROGRAM DESCRIPTION: This requirement is for engineering services to be provided in support of Test and Evaluation (T&E) and systems engineering activities primarily related to Aegis-Based Defense, formerly Aegis Ballistic Missile Defense (BMD) and Sea-Based Weapon Systems. Engineering service are provided to other entities, including (but not limited to) Program Executive Office Integrated Warfare Systems (PEO IWS), various Hypersonic programs, and Allied Foreign Military Sales (FMS) partners. Aegis-Based Defense is one weapon system in the layered defense provided for the United States and its deployed forces, friends and allies against ballistic missiles of all ranges in all phases of flight. This defense is provided through an integrated Ballistic Missile Defense System (BMDS), developed by the Missile Defense Agency (MDA). MDA is responsible for fulfilling the goals set out in the National Missile Defense Act of 1999 in deploying “as soon as is technologically possible an effective National Missile Defense system capable of defending the territory of the United States against limited ballistic missile attack”. In support of this goal, the Aegis-Based Defense program needs to collect high fidelity system under test and auxiliary sensor data in order to evaluate the results of the flight test and to determine if the system(s) met the mission objectives. Additionally, auxiliary sensor data is highly valuable in providing forensics for any anomalies that may have occurred during these events. Pre-/post-mission data analyses of this auxiliary sensor data is critical these flight test scenarios. This is a follow-on contract to N6893622D0024. The existing contract is Cost-Plus Fixed-Fee (CPFF), Level of Effort (LOE), and was awarded to Raytheon (RTX) on a sole source basis. The new contract will be a Firm Fixed Price (FFP). (3) REQUIRED CAPABILITIES: The MDA / Aegis-Based Defense program requires high fidelity pre-mission planning, real-time mission conduct and execution support, post-mission data analysis, and reporting of test results of high profile flight test events. Support shall be provided to various flight test events and systems engineering activities. This includes mission planning, test planning, generating test procedures, real-time mission conduct, data collection, real-time range safety mission support, mission data analyses and reporting, operations research support, and technical management support. Aegis-Based Defense requires support for test planning, test conduct, data reduction/analysis, and reporting of auxiliary sensor data during flight test events. This includes in-depth pre-mission analysis, which provides inputs to instrumentation, sensor data collection CONOPS, and sensor configurations to maximize valuable data collection. Recommendations for test support positions (TSPs) to auxiliary sensors will aid in maximizing valuable data collected. Inputs to test plans as well as mission requirements are needed to ensure mission test objectives are met. This includes auxiliary tracking and data collection objectives based on mission priorities and overall test objectives. Understanding test objectives will translate directly into what instrumentation should be used and how they should be configured. This includes inputs to all test participants (sea-based, ground-based, airborne, and space-based). Real-time mission conduct support assists auxiliary sensor participants to make adjustments to configurations, tracking objectives, and/or tracking CONOPS based on changes to mission scenarios. This support can ensure successful data collection during live missile and test vehicle launches. Mission conduct and execution support includes providing sensor and analysis support to assist range safety. Complex analyses and reporting of test results is needed to evaluate weapons and weapon systems to ensure mission test objectives have been met. This includes ingesting, reducing, processing, and analyzing all auxiliary data (optical, radar, telemetry) and data formats. Analyses and test results should be shared with the government and test community to ensure proper communication and collaboration. (4) PLACE OF PERFORMANCE: This effort will primarily be performed at PMRF at Barking Sands, Kauai, HI. Support will also be conducted at the following national test ranges and locations: Joint Base Pearl Harbor Hickam (JBPHH) on Oahu, HI; Naval Air Warfare Center Weapons Division (NAWCWD) Point Mugu Sear Range (PMSR) at Point Mugu, CA; Vandenberg Space Force Base (SFB) in CA; Reagan Test Site (RTS) on Kwajalein Atoll; Joint Base Elmendorf-Richardson (JBER) in AK; Cape Canaveral Space Force Station (CCSFS) at Cape Canaveral, FL; Naval Air Warfare Center Aircraft Division (NAWCAD) at Patuxent River, MD; and the Missile Defense Integration and Operations Center (MDIOC) at Colorado Springs, CO. (5) CONTRACT TYPE: The Government is considering a Firm Fixed Price (FFP) Idefinite Delivery Indefinite Quantity (IDIQ) contract with a five-year Ordering Period. (6) SPECIAL REQUIREMENTS: The Government requests that responses to this sources sought include the following: demonstrated capability to ingest, reduce, process, and analyze auxiliary sensor data and applicable data formats for the MDA /Aegis-Based Defense program. Auxiliary sensor data includes optics, radar, and telemetry, and applicable formats include binary, ASCII, and movie formats (h264, mp4, mkv, avi, mpg, etc.). Data analyses includes data reduction, data tracking algorithms, signature generation, data display/visualization, brightness/contrast and image enhancement, data registration, image sequence output, and background subtraction. Demonstrated capability to generate an early track of a launch vehicle to provide a state vector solution to range safety entities for immediate awareness and assessment of the vehicle trajectory status to the range safety officer. This will allow range safety to take corrective action (if needed) and prevent the vehicle from violating range safety boundaries (i.e. – IIP destruct limits, safe firing bearings, etc.). This system must be capable of meeting all range safety assessment criteria, including latency times, data rate, and first state vector solution time. Demonstrate ability to support Navy optical data collection aircraft with optical Subject Matter Expert (SME) for mission planning, sensor calibrations, real-time inputs to tracking operators, mission conduct, and post-mission data analysis. Demonstrate familiarity with test ranges, range instrumentation, range safety criteria, and range data collection capabilities. Assessment of test range capabilities, site surveys, and inputs for range instrumentation to improve data collection during test events. (7) ADDITIONAL INFORMATION: Upon evaluation of capability statements, if it is determined that this requirement will be unrestricted and procured on a competitive basis, the Government intends to evaluate Small-Business responses and conduct further market research to identify a subcontracting goal. CONTRACTOR RESPONSE: Any firm believing it can fulfill the requirement identified may submit a written response. The written response shall reference solicitation number N6893627R5001 and provide a capability statement that clearly indicates the firm’s experience, assets, background, and ability to perform he required work. Contractor responses shall also include the following information: a) A reference to the solicitation number N6893627R5001 and brief title of this announcement; b) Company name and address; c) Company's point of contact name, phone number, and e-mail address; d) Declaration as to whether a U.S. or foreign company; e) Company size (Small or Large according to the identified NAICS and size standard identified); f) If your company is a Small Business, specify if your company is one of the following: (a) Service-Disabled Veteran Owned Small Business (SDVOSB); (b) HUBZone Small Business; (c) 8(a) Concern; (d) Woman-Owned Small Business; (e) Economically Disadvantaged Woman-Owned Small Business; g) Provide any anticipated teaming arrangements and delineate between work to be accomplished by the prime and the work to be accomplished by the teaming partners; h) A brief capabilities statement package (no more than 5 pages in length, double spaced, 12-point font minimum), demonstrating ability to perform the specific requirements discussed above; i) An outline of previous projects related to the program description, identify specific work previously performed or currently being performed related to the program description; and j) Any other specific and pertinent information as pertains to this particular area of procurement that would enhance the Government’s consideration and evaluation of the information submitted. Questions and comments are highly encouraged. If necessary, an opportunity for a site visit will be offered after the solicitation is issued. No Vendors should appropriately mark any data that is proprietary or has restricted data rights. Responses shall be submitted by e-mail to the point(s) of contact listed above no later than 30 days from this notice date. DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.
56%
Market Research10/29/2026

Additional Details

Solicitation Number

N0003021R1025

Archive Date

Oct 10, 2020

Office Address

WASHINGTON NAVY YARD, DC, 20374-5127