GovChime
Notice ID: eee743f0005380ed948655b519594676Award NoticeAwarded

48--VALVE,LINEAR,DIRECT

Awarded on September 30, 2019. Full description on SAM.gov.

Awarded tounder N0010419PFE68 (source: SAM.gov award notice)• $371.7K

Overview

Posted
September 30, 2019
Notice type
Award Notice
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSUP WEAPON SYSTEMS SUPPORT MECH
PSC
48: VALVES
Last updated
Sep 25, 2026
Award date
Sep 30, 2019
Award amount (SAM.gov award notice)
$371.7K

Identifiers

Solicitation number
N0010418QFE62
Notice ID
eee743f0005380ed948655b519594676
Award number (PIID)
N0010419PFE68

Description

NSN 7H-4820-015436859-Q5, TDP VER 006, QTY 1 EA, DELIVER TO N50286, PORTSMOUTH NAVAL SHIPYARD L1SS, KITTERY, ME 03904. This notice of intent is not a request for competitive quotes and the proposed/contract action is for supplies or services for which the Government intends to negotiate with only one sourece. Interested persons may identify their interest and capability to respond to the requirement or submit quotes. Quotes received prior to the award date will be considered by the Government.A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at 215-697-6396 (DSN: 442-6396), or mail their request to DLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.

Full description on SAM.gov

Award Overview

Award Number

N0010419PFE68

Award Amount (SAM.gov award notice)

$371.7K

Award Date

Sep 30, 2019

Awardee

Original Solicitation

Notice ID: eee743f0005380ed948655b519594676

Posted Date: Sep 30, 2019

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

5
  • SPE7M126P9530
    SARGENT AEROSPACE & DEFENSE, LLC
    Department of DefenseNAICS 332919
    $3.9KSigned Aug 14, 2026
  • N0010425FZ90U
    SARGENT AEROSPACE & DEFENSE, LLC
    Department of DefenseNAICS 332919
    $1.1KSigned Aug 13, 2026
  • N0010426FZ90F
    SARGENT AEROSPACE & DEFENSE, LLC
    Department of DefenseNAICS 332919
    $245.7KSigned Aug 12, 2026
  • SPRMM126PKC54
    SARGENT AEROSPACE & DEFENSE, LLC
    Department of DefenseNAICS 332919
    $533.0KSigned Aug 12, 2026
  • N0010425FZ922
    SARGENT AEROSPACE & DEFENSE, LLC
    Department of DefenseNAICS 332919
    $18.5KSigned Aug 11, 2026

Contacts

Contracting Officer

Primary Contact

JOEL CURTIS, N743.5, PHONE (717)605-3229, FAX (717)605-4236, EMAILJOEL.CURTIS@NAVY.MIL

Documents

No documents available.

Lifecycle

Solicitation:N0010418QFE62
  1. Pre-Solicitation
  2. Awarded

This opportunity has been awarded.

  1. Pre-SolicitationMar 20, 2018

    48--VALVE,LINEAR,DIRECT

    Notice 14fc4aa4b58727afa7827c4fbcc62ae3 on SAM.gov

  2. AwardedCurrentSep 30, 2019

    48--VALVE,LINEAR,DIRECT

    Notice eee743f0005380ed948655b519594676 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-Sole Source / J&AOpen
NSN 7H-4810-016510042-X5, TDP VER 002, QTY 4 EA, DELIVERY FOB ORIGIN, ISSUE TO FLOWSERVE CORPORATION, LYNCHBURG, VA 24502-2248. 1. NAVSUP WSS INTENDS TO AWARD A CONTRACT FOR THE MANUFACTURE OF 4 EACH ACTUATORS, NSN 7H 4810-01-651-0042 X5, P/N 01-435-0436-4 IAW THE TECHNICAL DATA PACKAGE, SOLE-SOURCED TO FLOWSERVE CORPORATION, CAGE 52374. THE REQUIRED DELIVERY IS 210 DAYS AFTER DATE OF CONTRACT. 2. THE SOLICITATION NUMBER IS N00104-17-Q-BC15 AND AWARD NUMBER IS N00104-17-P-BW19. 3. THE ACQUISITION METHOD CODE/ACQUISITION METHOD SUFFIX CODE (AMC/AMSC) FOR THIS ACQUISITION IS 4P. 4P MEANS THE RIGHTS TO THE DATA NEEDED TO PURCHASE THIS PART FROM ADDITIONAL SOURCE(S) ARE NOT OWNED BY THE GOVERNMENT AND CANNOT BE PURCHASED, DEVELOPED, OR OTHERWISE OBTAINED. IT IS UNECONOMICAL TO REVERSE ENGINEER THIS PART. THIS CODE IS USED IN SITUATIONS WHERE THE GOVERNMENT HAS THE DATA BUT DOES NOT OWN THE RIGHTS TO THE DATA. ACQUIRE, FOR THE FIRST TIME, DIRECTLY FROM THE ACTUAL MANUFACTURER. 4. GOVERNMENT SOURCE INSPECTION IS REQUIRED. 5. A CERTIFICATE OF COMPLIANCE IS REQUIRED. 6. MIL-I-45208 HIGHER LEVEL INSPECTION IS REQUIRED. 7. MILITARY AND FEDERAL SPECIFICATIONS AND STANDARDS, QUALIFIED PRODUCTS LISTS (QPLS), QUALIFIED PRODUCT DATABASES (QPDS), MILITARY HANDBOOKS, AND OTHER STANDARDIZED DOCUMENTS MAY BE OBTAINED FROM THE DOD SINGLE STOCK POINT (DODSSP) AT DOCUMENT AUTOMATION AND PRODUCTION SERVICE (DAPS) IN PHILADELPHIA, PA. NOTE: PATTERN, DRAWINGS, DEVIATION LISTS, PURCHASE DESCRIPTIONS, ETC. ARE NOT STOCKED AT DODSSP. MOST DOCUMENTS ARE AVAILABLE IN ADOBE PDF FORMAT FROM ASSIST-ONLINE AT: HTTP://DODSSP.DAPS.DLA.MIL. USERS MAY USE ASSIST-QUICK SEARCH TO SEARCH FOR AND DOWNLOAD AVAILABLE DOCUMENTS DIRECTLY USING STANDARD BROWSER SOFTWARE. DOCUMENTS THAT ARE NOT AVAILABLE FOR DOWNLOADING FROM ASSIST-QUICK SEARCH CAN BE ORDERED FROM THE DODSSP WEBSITE USING THE ASSIST SHOPPING WIZARD AFTER OBTAINING A DODSSP CUSTOMER ACCOUNT BY FOLLOWING THE REGISTRATION PROCEDURES. USERS WHO DO NOT HAVE ACCESS TO THE INTERNET MAY CONTACT THE DODSSP ASSIST HELP DESK AT 215-697-6396 (DSN: 442-6396), OR MAIL THEIR REQUEST TO DLA DOCUMENT SERVICES, BLDG. 4/D, 700 ROBBINS AVENUE, PHILADELPHIA PA 19111-5094. 8. AWARD WILL BE MADE ONLY IF THE OFFEROR, THE PRODUCTS/SERVICE OR THE MANUFACTURER MEETS THE QUALIFICATION REQUIREMENTS AT TIME OF AWARD, IN ACCORDANCE WITH FAR CLAUSE 52.209-1. THE SOLICITATION IDENTIFIES THE OFFICE WHERE ADDITIONAL INFORMATION CAN BE OBTAINED CONCERNING QUALIFICATION REQUIREMENTS AND IS CITED IN EACH INDIVIDUAL SOLICITATION.
-Pre-SolicitationOpen
-Solicitation11/30/2026
This Sources Sought notice is being issued by the Naval Surface Warfare Center, Philadelphia Division (NSWCPD), on behalf of the NSWCPD Division 45. The Government is seeking information regarding the procurement of a maximum of twenty (20) Electrical Hull Penetrators (EHP). Specifications are listed in the attached Sources Sought Notice. SUBMISSION OF RESPONSES: Respondents shall provide capability statements with specific information regarding their ability to provide the required materials (described in the Sources Sought Attachment) to meet Division 45 needs. NSWCPD will only accept unclassified, electronic submissions. Responses shall be submitted via email to christopher.m.mccarthy26.civ@us.navy.mil by 16:30 EST, 20 November 2026. Responses shall list N64498-RFPREQ-PD-45-0176 in the subject line. No phone calls shall be accepted. Government WILL NOT PAY for any information received, and the Government will not compensate the respondent for any cost incurred in developing the response to this notice. The Government will not release any information marked with a proprietary legend received in response to this notice to any firms, agencies or individuals outside the Government without written permission in accordance with the legend. Please be advised that all submissions become Government property and will not be returned. This is a follow up Sources Sought Notice to an Industry Day Virtual Event held on 27 October 2026. During that event the following questions were asked. Below each question is the answer to said question. Question #1: Is this 10/27 conference a virtual event via a web link or on site at Naval Surface Warfare Center Philadelphia Division (NSWCPD)? Answer #1: This event will take place on Microsoft TEAMs. You need to register on Eventbrite to access the link. Question #2: For this PRE-SOL for Columbia Class BST-1 Electrical Hull Penetrators and Transmitter Cable Assemblies, do cable assembly manufacturers need to have SUBSAFE Level 1 or 2 certification for doing hull penetrator work? Answer #2: The Electric Hull Penetrators (EHP) is Level I material within the SUBSAFE boundary and any vendor does not need to be in NAVSEA Note5000. Question #3: I looked again at the link and there are no answers or questions posted let alone a specific statement about SubSafe Level 1 or 2. It does mention “ in accordance with applicable documents in Section 2.0 and the Statement of Work” but there is no such documents on the link. Answer #3: Again to Confirm, The Electric Hull Penetrators (EHP) is Level I material within the SUBSAFE boundary and any vendor does not need to be in NAVSEA Note5000. As for the Section 2.0 Documents and Statement of Work, those have not been provided to any vendors at this time. They will be provided at the time the official Request for Proposal (RFP) goes out. The anticipated date that the RFP goes out has not been determined yet. Question #4: We would request that the solicitation be issued as full and open given the NAICS code stated. Answer #4: Our team is still evaluating whether competing the contract as full and open or set aside is the best path forward. Question #5: Previously a vendor has been shown specifications for a cable used on BST-1 (BST-1 CABLE REQUIREMENTS PER 1197262 (PC 19). Is the cable still a 2SWF-2 (Modified) and if so, is a neoprene outer jacket still mandatory? Answer #5: The cable is still required to be LS2SWU-12 which includes a polyolefin outer jacket. Additionally, this cable will require exterior armor for EMI protection. Question #6: Question for you regarding Welding NDT. Do you need us to complete the Shipbuilder's LVL3 NDT? Answer #6: Personnel qualified to LVL 2 are permitted to perform the weld NDT, the NDT inspection must be approved by LVL 3 qualified personnel. Question #7: For the section where the pressure proof caps go on, are those welded to the main body and require a QQ-N-286 weld procedure? Does NSWC-PD need to certify this weld procedure? Answer #7: Yes, the 4 receptacles are welded to the main body. The weld type is monel QQ-N-281 to k-monel QQ-N-286. For additional guidance on performing the weld, please refer to the latest revision of NAVSEA Tech Publication 278. The procedure developed using the guidance in 278 requires NSWCPD approval. NSWCPD would be looking for the vendor to submit their weld procedure specification (WPS), product quality report (PQR), and welder qualifications for approval. Attached to this Sources Sought Notice are Two Documents: A Breakdown of the sources sought notice in a word document and what is being requested with this notice A distributable guidance that helps give newcomers an initial roadmap to preparing to support work producing Level I material. An updated slideshow from the Industry Day Event with the questions asked and said answers during and immediately after the event. THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A TASK ORDER AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT NOTICE IS STRICTLY VOLUNTARY.
-Market Research11/20/2026
Login at https://piee.eb.mil and search for 'N4008527R0017' to obtain more details.*
-Solicitation12/08/2026

Additional Details

Solicitation Number

N0010418QFE62

Archive Date

Oct 15, 2019

Office Address

MECHANICSBURG, PA, 17050-0788