Notice ID: 948aff85569b444f965fbe462ad104cfCombined Synopsis/Solicitation
30mm COUNTER BALANCE PORTABLE FLOOR HOIST
Archived on May 3, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:30 PM UTC−04:00
- Posted
- March 10, 2021
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NSWC CRANE
- Last updated
- Sep 9, 2025
Identifiers
- Solicitation number
- N0016421Q0088
- Notice ID
- 948aff85569b444f965fbe462ad104cf
Description
N00164-21-Q-0088 30mm COUNTER BALANCE PORTABLE FLOOR HOIST FSG 3950 - NAICS 333923 ISSUE DATE 10 MAR 2021 CLOSING DATE 19 MAR 2021 04:30 PM Eastern Time ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for 30mm Counter Balanced Portable Floor Hoist Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-21-Q-0088 is hereby issued as an attachment hereto. Contract Opportunities on https://beta.sam.gov/ has officially replaced FBO.gov All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://beta.sam.gov/. It is the responsibility of interested vendors to monitor https://beta.sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to tracy.fields@navy.mil. All required information must be received on or before 19 MAR 2021 04:30PM EASTERN TIME.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0016421Q0088- Combined Synopsis
- Combined SynopsisCurrentMar 10, 2021
30mm COUNTER BALANCE PORTABLE FLOOR HOIST
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
84% | Solicitation | 11/23/2026 | |
150 Metric Ton Mobile Boat Hoist for the Naval Surface Warfare Center, Carderock Division ? Combatant Craft Division (NSWCCD-CCD) Detachment Norfolk, Bldg. V-47, Naval Station Norfolk, Norfolk, Virginia 23511. | 73% | Solicitation | 07/31/2026 |
Chain and Hoist10A2016 GANTRY A SERIES STEEL ADJUSTABLEHEIGHT include Wheel Brakes and FestooningNER2G080SHarrington 8 Ton NER2 Hoist with Geared Trolley 10 foot HOL and 16 foot Pendant | 71% | Combined Synopsis | 04/22/2026 |
100MT MOBILE BOAT HOIST, NAVAL SPECIAL WARFARE GROUP 8, JOINT EXPEDITIONARY BASE LITTLE CREEKAmendment 0006 is issued for clarification purposes to: 1) revise Specification Section 2.4; and 2) revise Attachment A | 71% | Solicitation | 12/19/2025 |
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation. | 70% | Combined Synopsis | 11/13/2026 |
Additional Details
Solicitation Number
N0016421Q0088
Archive Date
May 3, 2021
Office Address
CRANE, IN, 47522-5001