Notice ID: 4502cdb4976341dd8ead479f680f6e41Combined Synopsis/Solicitation
SOLE SOURCE - REFURBISHMENT - Davit STEM Weldments QTY 2 and MAST Weldments QTY 12 (BASE w/OPTIONS)
Archived on November 4, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−04:00
- Posted
- September 17, 2024
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 811210: Electronic and Precision Equipment Repair and Maintenance
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NSWC CRANE
- Last updated
- Sep 9, 2025
Identifiers
- Solicitation number
- N0016424Q0318
- Notice ID
- 4502cdb4976341dd8ead479f680f6e41
Description
N00164-24-Q-0318 SOLE SOURCE - REFURBISHMENT - Davit STEM Weldments QTY 2 and MAST Weldments QTY 12 (BASE w/OPTIONS) FSG K014 - NAICS 811210 - ISSUE DATE 17 SEP 2024 CLOSING DATE 20 SEP 2024 4:00 PM Eastern Time ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for This requirement is for both service and supply of the Davit STEM Weldments QTY 2 and MAST Weldments QTY 12 (BASE 3, OPTIONS 9 ) over the course of the next three years as an options (TOTAL MAST WELDMENTS 12). SOLE SOURCE PROCUREMENT- The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source Chesapeake Machining & Fabrication, Inc. (Cage- 0SYM8) 210 S. Janney St. Baltimore, MD 21224, under the authority of FAR 13.106-1. This is being sole sourced because Chesapeake Machining & Fabrication, Inc is a proven source with the expertise and equipment required to refurbish the weldments. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-24-Q-0318 is hereby issued as an attachment hereto. Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to sandra.e.gunderman.civ@us.navy.mil All required information must be received on or before 20 SEP 2024 - 4:00 PM EASTERN TIME.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0016424Q0318- Combined Synopsis
- Combined SynopsisCurrentSep 17, 2024
SOLE SOURCE - REFURBISHMENT - Davit STEM Weldments QTY 2 and MAST Weldments QTY 12 (BASE w/OPTIONS)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Department of the Navy, Naval Information Warfare Center Pacific (NIWC Pacific), intends to solicit, negotiate, and award a Firm-Fixed-Price purchase order on a noncompetitive basis to Keysight Technologies, Inc. pursuant to FAR Part 12 and FAR 13.106-1(b). The requirement is for Original Equipment Manufacturer (OEM) on-site calibration services for Government-owned Keysight Technologies test and measurement equipment identified in Attachment 1 ? Equipment List. Based on the approved Justification for Non-Competitive Procurement (JNCP), the Government has determined that only one responsible source can satisfy the agency?s requirements. A redacted copy of the JNCP is attached to this notice. This notice is not a request for competitive quotations or proposals. Interested parties may submit capability information demonstrating their ability to satisfy the Government?s requirement. A determination by the Government not to compete this requirement based upon responses to this notice is solely within the discretion of the Government. The point of contact for this announcement is Kylie Nevells at kylie.m.nevells.civ@us.navy.mil. All responding vendors must be registered in the System for Award Management (SAM) at the time of response submission and maintain an active Unique Entity Identifier (UEI) and CAGE Code. Information regarding SAM registration may be found at SAM.gov. Any comments, questions, or concerns regarding this notice may be submitted via e-mail to kylie.m.nevells.civ@us.navy.mil no later than 19 May 2026 at 1400 Pacific Time. Be advised that the aforementioned information is anticipatory in nature and is not binding. This notice is for informational purposes only and is not a request for competitive quotations. The information contained in this notice is preliminary and subject to change without notice. This notice is provided for informational purposes only and shall not be construed as a commitment by the Government to issue a solicitation or award a contract. | 54% | Special Notice | 05/19/2026 |
N00164-27-Q-0016 – SOLE SOURCE – MERIDIAN IV MAINTENANCE – FSG J066 - NAICS 811210 ISSUE DATE 05 NOV 2026 – CLOSING DATE 19 NOV 2026 – 12:00 PM Eastern Time Naval Surface Warfare Center (NSWC) Crane has a requirement for Meridian IV Microscope maintenance p/n: 1119015 / 7512 / F7081251, along with maintenance on other components for microscope. The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, FEI COMPANY, 5350 North East Dawson Creek Drive, Hillsboro, Oregon 97124-5793, under the authority of FAR 13.106-1. This is being sole sourced because only FEI Systems possesses the following attributes of which are critical to both the timely and successful analysis/repair/maintenance of this equipment. They have proprietary rights to all data, drawings and schematics and have in-house, both trained and licensed technical personnel as well as a stockpile of certified repair/replacement parts. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-27-Q0016 is hereby issued as an attachment hereto. Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to cierra.n.vaughn2.civ@us.navy.mil. All required information must be received on or before 19 NOV 2026 - 12:00 EASTERN TIME. | 44% | Combined Synopsis | 11/19/2026 |
Offsite Depot Repairs of Airborne Electronic Attack Equipment The Government has a requirement to move repair of Legacy Prime Mission Equipment (PME) currently performed in Government lab spaces to offsite facilities to free up Government lab space for repair of newer PME. | 44% | Awarded | Open |
The objective of this task is to have the vendor, Rohde & Schwarz (OEM), perform calibration/repair services for Code 137/950 Rohde & Schwarz Standards. Competitive offers will not be accepted. | 41% | Pre-Solicitation | 11/20/2026 |
THIS IS A SOURCES SOUGHT NOTICE. THIS NOTICE IS ISSUED FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION OR INVITATION FOR OFFERORS TO SUBMIT PROPOSALS. A SYNOPSIS OF PROPOSED CONTRACT ACTION WILL BE POSTED AT A LATER DATE WHICH WILL PROVIDE INSTRUCTIONS FOR OFFERORS TO RESPOND TO THIS OPPORTUNITY. The Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF), Contracting Department (Code 400), is issuing this sources sought notice. The sources sought is being issued as a means of conducting market research to determine the interest and capability of Industry to participate in a competitive acquisition to perform accredited ISO 17025 calibration services and repairs of ELEVEN (11) units, Five (5) ROTALIGN Ultra Touch ALI50.00 and SIX (6) ROTALIGN Ultra ALI40.000, and to bring the Government Furnished Equipment (GFE) up to Original Equipment Manufacturer (OEM) specifications. The tentative North American Industry Classification System (NAICS) code selected for this acquisition 811210 - Electronic and Precision Equipment Repair and Maintenance, with a small business size standard of $34,000,000. To be considered an interested vendor, you must possess this NAICS code in your System for Award Management (SAM) registration. Interested offerors must be registered in the SAM at www.sam.gov. Based on the responses to this sources sought notice, this requirement may be set-aside for small business (in full or in part) procured through full and open competition (unrestricted), or procured on a sole source basis. All small business set-aside categories will be considered. Telephonic inquiries will not be accepted or acknowledged, the government will not be providing evaluations or comments to companies providing sources sought responses but the responses will be used to inform the government as to the best means of procuring this requirement. Interested parties are requested to return both the attached questionnaire and a capability statement via email. The email subject line should be “N4523A62873750 Sources Sought Response for repair and accredited ISO 17025 calibration services”. The response to the sources sought may be in either Microsoft Word, Portable Document Format (PDF), or in the body of the email and shall be addressed to Patrick Scott at patrick.j.scott.civ@us.navy.mil and CC Jacqueline Edgerton at jacqueline.f.edgerton.civ@us.navy.mil Submissions must be received via email no later than 1:00 PM Pacific Standard Time on 23 Nov 2026. Questions or comments regarding this notice may be forwarded to at Patrick Scott at patrick.j.scott.civ@us.navy.mil and CC Jacqueline Edgerton at jacqueline.f.edgerton.civ@us.navy.mil EMAIL ONLY. No phone calls will be accepted. | 41% | Special Notice | 11/23/2026 |
Additional Details
Solicitation Number
N0016424Q0318
Archive Date
Nov 4, 2024
Office Address
CRANE, IN, 47522-5001