GovChime
Notice ID: 93f8451b386d4871a25e577fecf257efCombined Synopsis/Solicitation

REPAIR AND CALIBRATION OF SINGLE DENSITY 93000

Archived on October 29, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM EDT
Posted
October 8, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSEA.NAVSEA WARFARE CENTER.NSWC CRANE
Place of performance
Crane, Indiana, 47522
Last updated
Oct 29, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
N0016427Q0002
Notice ID
93f8451b386d4871a25e577fecf257ef

Description

N00164-27-Q-0002 – SOLE SOURCE – REPAIR AND CALIBRATION OF SINGLE DENSITY 93000   FSG J066 - NAICS 811210

ISSUE DATE 7 OCT 2026 – CLOSING DATE 14 OCT 2026 – 3:00 PM Eastern Time

Naval Surface Warfare Center (NSWC) Crane has a requirement for repair and calibration of a Single Density Advantest Verigy 93000.

The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, JAD GROUP INC. Grayslake, IL 60030, under the authority of FAR 13.106-1. This is being sole sourced because (The OEM, Advantest, provided their proprietary rights and data to JAD Group, Inc.). All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov.

 

This solicitation is being issued pursuant to the procedures at FAR Part 13.  Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-27-Q-0002 is hereby issued as an attachment hereto. 

Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov

All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/.  It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. 

For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award.

Offers shall be e-mailed to Christina.l.staggs.civ@us.navy.mil.    All required information must be received on or before 14 OCT 2026 3:00PM EASTERN TIME.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • Solicitation - N0016427Q0002.pdf

    1.9 MBAdded in Combined Synopsis/Solicitation version 2Posted
    Download
  • 27Q0002_Syn.pdf

    84 KBAdded in Combined Synopsis/Solicitation version 2Posted
    Download
  • 26-GXM-0155- Non_Comp_Redacted.pdf

    155 KBAdded in Combined Synopsis/Solicitation version 2Posted
    Download

Lifecycle

  1. 1
    Version 1Combined Synopsis/Solicitation

    REPAIR AND CALIBRATION OF SINGLE DENSITY 93000

    Notice 2b14d405bc4d4a80b2e6d93575d90871 on SAM.gov

  2. 2
    Version 2Combined Synopsis/SolicitationCurrent

    REPAIR AND CALIBRATION OF SINGLE DENSITY 93000

    Notice 93f8451b386d4871a25e577fecf257ef on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
N00164-27-Q-0016 – SOLE SOURCE – MERIDIAN IV MAINTENANCE – FSG J066 - NAICS 811210 ISSUE DATE 05 NOV 2026 – CLOSING DATE 19 NOV 2026 – 12:00 PM Eastern Time Naval Surface Warfare Center (NSWC) Crane has a requirement for Meridian IV Microscope maintenance p/n: 1119015 / 7512 / F7081251, along with maintenance on other components for microscope. The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, FEI COMPANY, 5350 North East Dawson Creek Drive, Hillsboro, Oregon 97124-5793, under the authority of FAR 13.106-1. This is being sole sourced because only FEI Systems possesses the following attributes of which are critical to both the timely and successful analysis/repair/maintenance of this equipment. They have proprietary rights to all data, drawings and schematics and have in-house, both trained and licensed technical personnel as well as a stockpile of certified repair/replacement parts. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-27-Q0016 is hereby issued as an attachment hereto. Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to cierra.n.vaughn2.civ@us.navy.mil. All required information must be received on or before 19 NOV 2026 - 12:00 EASTERN TIME.
-Combined Synopsis11/19/2026
N00164-27-Q-0005 – SOLE SOURCE – CELESTRON GOLD PACKAGE – PSC J066 – NAICS 811210 ISSUE DATE 20 OCT 2026 – CLOSING DATE 26 OCT 2026 – 4:00 PM Eastern Time NSWC Crane has a requirement for Celestron VF Gold Package SOLE SOURCE PROCUREMENT- The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, limited sources or brand name only Thermo KeyTek LLC, 47DW3, under the authority of FAR 12. This is being solicited on a sole source/brand name only basis because Items Peculiar to One Manufacturer All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 12 as a written . Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-27-Q-0005 is hereby issued as an attachment hereto. All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to trista.m.ray.civ@us.navy.mil. All required information must be received on or before 26 OCT 2026 – 4:00 PM EASTERN TIME.
-Combined Synopsis10/26/2026
Offsite Depot Repairs of Airborne Electronic Attack Equipment The Government has a requirement to move repair of Legacy Prime Mission Equipment (PME) currently performed in Government lab spaces to offsite facilities to free up Government lab space for repair of newer PME.
-AwardedOpen
N0016426SNBXX REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT Calibration services for a diverse inventory of Test, Measurement, and Diagnostic Equipment (TMDE) PSC J052, J066, H266, H366 NAICS 541380, 811219 1.0 Objective & Background This Request for Information (RFI) / Sources Sought (SS) notice is issued by the Naval Surface Warfare Center (NSWC), Crane Division Contracting Department, Crane, IN. The NSWC Crane Contracting Department is conducting market research to identify potential industry partners capable of providing comprehensive calibration services in accordance with OPNAV 3960.16 for a diverse inventory of Test, Measurement, and Diagnostic Equipment (TMDE). Currently, NSWC Crane utilizes organic support in combination with a SeaPort Task Order and a Blanket Purchase Agreement (BPA) for calibration of TMDE for navy programs at NSWC Crane. The Government is exploring the feasibility of consolidating these requirements into a single, multi-year contract (e.g., Base Year plus Option Years). The primary objective of this market research is to determine if industry is interested in running the calibration program in accordance with the OPNAV 3960.16 at the contractor's own facility or government owned contractor ran facility. The Government is seeking capability statements regarding the calibration of approximately 2,700 unique TMDE types and ~7,000 total TMDE assets annually to ensure operational readiness and strict compliance with technical standards. 2.0 Acquisition Strategy & Disclaimer THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is for planning purposes only and does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. The information provided in the RFI is subject to change and is not binding on the Government. The Navy has not made a commitment to procure any of the items discussed, and release of this RFI should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. All submissions become Government property and will not be returned. Information gathered from this market research will directly inform the Government's future acquisition strategy, including the determination of contract type, the feasibility of consolidating these calibration services, and the viability of shifting the primary place of performance to contractor-owned facilities. 3.0 Incumbent Contract Information The current workload is distributed across the following contract vehicles: Supported Equipment N0017819D8285/N0016423F3007 Goldbelt ILS 5/1/2023-4/30/2028 Unsupported Equipment N0016426A0026 Cross technologies 4/1/2026-3/31/2031 N0016426A0025 ENI 4/1/2026-3/31/2031 N0016426A0024 Transcat 4/1/2026-3/31/2031 N0016426A0023 Micro precision 4/1/2026-3/31/2031 N0016426A0022 Tektronix 4/1/2026-3/31/2031 4.0 Summary of Requirements The required calibration services span multiple asset categories. All calibration services must be performed in accordance with ISO/IEC 17025, navy approved and/or specialized approved procedures. Technical Standard & Location Requirements: The Government intends for the bulk of calibration services to be performed by the contractor at the contractor's facility. All calibrations must conform strictly to the ISO/IEC 17025 standard. While most calibration efforts will be conducted at contractor facilities and on station at NSWC Crane, there will be a significant amount of calibration workload that will be conducted at various industry locations supporting NSWC Crane workload. Locations vary across Indiana and adjoining states and are subject to change through the life of the contract. Logistics requirements: Personnel physically inspect the shipping container and the TMDE itself for transit damage. Onsite Pick up/delivery of assets 2-5 times per week Reference MIL-STD-2073-1 for assets over $10,000 Verifies that all components listed on the shipper's DD Form 1149 or stowage list are present. Engineering services: The Contractor shall provide high level support in Metrology and Calibration Laboratory for various project and programs at NSWC CRANE. Various Administration support: Contractors must maintain rigorous, auditable stewardship of all GFP throughout its lifecycle using the Procurement Integrated Enterprise Environment (PIEE) GFP Module. Workload Distribution The historical and projected annual workload includes, but is not limited to, the following functional shop code categories: Shop Code Category Estimated Annual Calibration Volume TORQUE - 1,219 METERS/D&A - 1,070 POWER SUPPLIES - 571 FIELD CAL (Onsite) - 341 HANDTOOLS - 275 PRESSURE/VACUUM - 175 MICROWAVE ACTIVE - 394 SIG GEN - 276 TEMP/HUMIDITY - 454 Other Specialized Equipment - ~2,000+ (Combined) 5.0 Submission Instructions Interested parties are requested to respond to this RFI with a comprehensive capability statement addressing their ability to meet the workload requirements outlined in Section 4.0. Responses are due no later than 1400 EST on 26 October 2026 Submission Format Requirements Page Limit Responses shall be limited to 5 pages. Delivery Method Submissions must be sent via e-mail only to the designated Point of Contact. Proprietary Info Must be minimized and clearly marked. Please segregate proprietary information to aid the Government's review. Required Information to Include Interested parties are requested to submit a Capability Statement addressing the following key areas: Corporate Overview Company name, CAGE code, UEI, socio-economic status (e.g., Small Business, 8(a), SDVOSB), and current CMMC Certification Level. Contractor Facility Capacity Explicit confirmation of the vendor's ability to host and process this volume of equipment at their own facility, rather than relying on Government space. The contractor should be within distance capable of being here 2-5 a week. Technical Capability Overview of laboratory capabilities for the listed categories, current accreditations (e.g., ISO/IEC 17025, ANSI/NCSL Z540.1, ANSI/NCSL Z540.3), and capacity to maintain industry standard turnaround times (TAT) for high-volume throughput. Logistics and Handling Specific processes for managing the logistics pipeline: secure transportation, shipping/receiving of government assets, and the methodology for dispatching technicians for the ~340 required onsite (field) calibrations. Government Points of Contact Direct all questions regarding this RFI and submit all capability statements to the following designated point of contact: Primary POC: Andrew Figg andrew.n.figg.civ@us.navy.mil Secondary POC Anthony Morin anthony.m.morin5.civ@us.navy.mil 6.0 Attachments OPNAVINST 3960.16C List of Unique TMDE (Excel File)
-Market Research10/26/2026
The Department of War (DoW) Drug Demand Reduction Program (DDRP) has a requirement for a consolidated non-personal maintenance services contract for designated laboratory equipment (Hamilton STAR and STARlet systems) at six (6) DoW sites. THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes – it does not constitute a Request for Proposal (RFP) or Request for Quote (RFQ) or a promise to issue an RFP or RFQ in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not at this time seeking proposals and will not accept unsolicited proposals. Respondees are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFP/RFQ, if any is issued. The Contractor shall provide for all-inclusive parts, labor, materials, travel, personnel, supervision, and shipping costs necessary to perform all maintenance actions covered under this contract, unless otherwise specified, for all equipment identified. The Contractor shall provide and install all materials, parts, and services for preventive and corrective maintenance, telephone support, hardware upgrades, software updates (i.e., patches) and upgrades (i.e., new versions) for all equipment identified. The Contractor shall maintain the equipment within the original equipment manufacturer (OEM) specifications, in like new or better condition. Please see the attached draft Statement of Work (SOW), which details the types of tasks and deliverables that contractors will be required to perform under the contract. It is requested that interested parties respond to this posting via email to john.d.favata.civ@us.navy.mil no later than 01:00 PM ET Wednesday, 10-NOV-2026. Responses should include a capability statement not to exceed two (2) pages in a searchable PDF file, 8.5 x 11 paper with a minimum 12 point font size. The page limit is inclusive of the cover sheet and past performance information. Responses from interested parties shall include the following information in the specified order below: Cover Sheet that includes: - Company name and address - Unique Entity ID, DUNS number and CAGE Code - Point of contact with corresponding phone number and e-mail address - Business Size and socio-economic classification status of the company, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. Capabilities Statement should include: demonstrating the requisite skills, resources and capabilities necessary to perform the requirements of the SOW. A narrative statement demonstrating the primary nature of your business and company’s capability to execute this requirement. For instances where your company cannot meet the SOW requirement(s), please explain. For instances where your company can meet the SOW requirement(s), please show how your company meets/exceeds each requirement. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement.
-Market Research11/10/2026

Additional Details

Solicitation Number

N0016427Q0002

Archive Date

Oct 29, 2026

Office Address

CRANE, IN, 47522-5001