GovChime
Notice ID: ec3dfe272b265ecf3ee6ab70603cb0ebSolicitation

67--GYRO STABILIZED HELICOPTER CAMERA MOUNT; 1 EA for the Naval Surface Warfare Center Carderock Division (NSWCCD).

Archived on June 27, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 AM UTC−05:00
Posted
July 18, 2008
Notice type
Solicitation
NAICS
333315: Classification Not Available
Agency
Department of WarDepartment of the Navy

Notice details

Office
NSWC CARDEROCK
PSC
67: PHOTOGRAPHIC EQPT
Last updated
Sep 25, 2026

Identifiers

Solicitation number
N0016708T0159
Notice ID
ec3dfe272b265ecf3ee6ab70603cb0eb

Description

The Naval Surface Warfare Center Carderock Division has a requirement for a "Gyro Stabilized Helicopter Camera Mount." This is a notice for a commercial item and is being issued via Request for Quotation N00167-08-T-0159 under the Simplified Acquisition Procedures (SAP). All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. A firm fixed-price contract is anticipated. To assist in evaluating the technical requirements, RFQ N00167-08-T-0159 shall be posted in FEDBIZOPPS on or before 25 JUL 08. Please direct any inquiries to Patricia Perzella, NSWC Simplified Acquisition, at voice 301-227-5994 or e-mail at patricia.perzella@navy.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Patricia Perzella 301-227-5994

Documents

No documents available.

Lifecycle

Solicitation:N0016708T0159
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationJul 17, 2008

    67--GYRO STABILIZED HELICOPTER CAMERA MOUNT; 1 EA for the Naval Surface Warfare Center Carderock Division (NSWCCD).

    Notice d2272196f9fcb61867885a48465724a1 on SAM.gov

  2. SolicitationCurrentJul 18, 2008

    67--GYRO STABILIZED HELICOPTER CAMERA MOUNT; 1 EA for the Naval Surface Warfare Center Carderock Division (NSWCCD).

    Notice ec3dfe272b265ecf3ee6ab70603cb0eb on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a combined synopsis/solicitation for commercial item prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: 65” Dual Heat Wide Formant Roll Laminator. This solicitation will be competed as a Brand Name or Equal, Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017427Q1002. The NAICS code is 333310 and the business size standard is 1000. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2025-06 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251701. The Government will award a contract resulting from this solicitation to the vendor responsible whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. The Government will make award based on the availability of funds. Specifications: Laminator Series that delivers versatility, quality and economy all in one easy-to-use unit. The machine can laminate, encapsulate, and mount both vinyl and paper media. Its dual heated rollers can be controlled independently to temperatures up to 266ºF allowing for maximum adhesion for many applications. Operators can encapsulate using 1.5 – 10mil low melt films, cold laminate with PSA film, and board mount with just a few simple changeovers. Accepts film rolls to 10” OD on front and rear swing-out supply shafts for easier set-ups and fewer film changes and are available with a motorized rear rewind option for roll-to-roll applications. The swing up feed table and convenient 36” table height makes it easier for busy operators to stage multiple jobs. REQUIREMENTS Key requirements: Laminating Width up to 65" Dual Heated Rollers Adjustable Speed Control up to 13'/min Roller Gap Control allowing 1" Mounting Capability Web Clutch Adjustment Accommodates LOW MELT Laminating Film 1.5-10mil in Thickness/li> Two Swing-Out Shafts and Two Front Unwind Shafts Dual Tension Control Print Pressure Plate Installation Included 1 Year Mfr Warranty Parts and Labor Core Size – 3” Adjustable Temperature – Yes Moving Idler Bar – Yes Ready Light – Yes Mounting Capability – Yes (1”) Safety Approval – CE Roller Gap Adjustment - Yes Safety Shield – Yes Feed Table Alignment Guide – Yes Speed Feet Per Minute – 0 – 13 fpm Display Type - LCD Machine Dimensions – 69”W x 36” H X 49”D Electrical Requirements – 220V, 60Hz, 22 amps single phase: MAX 5700W Adjustable Speed Control – Yes Reverse Function – Yes Laminating Type – Hot/Cold Max. Laminating Width – 65” Warm up Time – 10 – 20 minutes Min/Max Film Thickness – 1.5 – 10 mil (Low Melt) Evaluation Factors (in order of importance) Technical – The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. To be determined technically acceptable, the quote must clearly demonstrate compliance with all specifications listed under the "Requirements" section. Offerors proposing an "equal" product must submit descriptive literature, product data sheets, or technical specifications that explicitly verify the proposed machine meets or exceeds every key requirement. Price – Quotes must include all applicable costs. Submitted quotes are NOT TO EXCEED $350,000.00 (Simplified Acquisition Threshold). Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Wednesday 18 November 2026 by 4 PM EST. Quote packages are due by 24 November 2026 by 4 PM EST. (COB). Late quotes will not be considered. Please fill in clauses in RFQ as they apply to your business. Quote packages shall be sent to barbara.j.grinder.civ@us.navy.mil and contain a cover sheet that provides the following information: 1. Official Company Name; 2. Point of contact including name and phone number; and 3. DUNS number and Cage Code. The Points of Contact for this acquisition is: Barbara.j.grinder.civ@us.navy.mil
-Combined Synopsis11/24/2026
Solicitation N0042124Q0078 is issued as a combined synopsis/solicitation. The Government intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order on sole source basis with Atlanta Attachment Company, Inc., under the authority of FAR Part 12 and FAR Part 13. Offerors must be registered in the System for Award Management (https://www.sam.gov/sam/)database prior to submission of an offer to be considered for award of any DoD contract. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by 5:00 (EST) on 2 January 2024 will be considered by the Government. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. Facsimile proposals are acceptable. For information contact: Cathleen Emmart, EMAIL: cathleen.m.emmart.civ@us.navy.mil Please provide the following information with your response. (1) FOB: ______________________ (2) Shipping Cost: ______________ (3) Tax ID# ____________________ (4) UEID# _____________________ (5) Cage Code: _________ You must be registered in System for Award Management (Sam.Gov) (6) Business Size: Small Business Yes or No (7) GSA or SEWP Contract # if applicable: ________________________ (8) Estimated delivery time after issuance of purchase order ____________________ (9) Published Price list. *YOU MUST SUBMIT SIGNED DOCUMENTATION FROM THE OEM VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR*
-Combined Synopsis01/02/2024
Amendment 01 Pre-Quote Site Visit: 10 November 2026 (09:00 AM – 12:00 Noon). See attachment Amendment 0001 for instructions. Gov't Q&A Posting. See N0016727Q1002 Q&A. ======================================================================== This announcement constitutes a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Revolutionary FAR Overhaul Subpart 12.2, as supplemented with additional information contained herein. This announcement constitutes the only solicitation being issued; quotes are being requested via this Request for Quotes (RFQ), and a separate written solicitation will not be issued. NSWCCD has a requirement for the procurement, delivery, and turn-key installation of a replacement pump (Pump No. 1) on York Chiller No. 1 in Building 157, which provides critical chilled-water cooling to the Building 13 Server Rooms. This procurement IS NOT set aside for small businesses (Full and Open Competition / Brand-Name Restricted). See attachments for requirement and OEM information. Quotes and technical capability statements must be submitted via email no later than 09:00 AM Eastern Daylight Time (EDT) on November 06, 2026, to: Contract Specialist: Joseph Estrella (joseph.l.estrella.civ@us.navy.mil) Cc (Contracting Officer): Greg Finke (william.g.finke.civ@us.navy.mil)
-Combined Synopsis11/16/2026
Solicitation Information All quotes/responses shall be submitted via email to Gabrielle King at Gabrielle.l.king4.civ@us.navy.mil no later than 4:00PM Eastern Time on 11/2/2026. Solicitation N0042127Q1005 is issued as a brand name procurement. The Government intends to purchase on a firm fixed-price basis, and to solicit and award the proposed purchase order on a brand name basis for Kijero, LLC for as listed, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 8.405-6(b)(1). BRAND NAME ONLY!! NO SUBSTITUTIONS ACCEPTED Offeror's must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at https://www.sam.gov. **VENDORS MUST BE AUTHORIZED DISTRIBUTOR/RESELLER. YOU MUST SUBMIT SIGNED DOCUMENTATION VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR OR YOU WILL NOT BE CONSIDERED. * MUST BE TAA COMPLIANT** and **PROVIDE COUNTRY OF ORIGIN ON QUOTE** This is a firm fixed-price procurement; therefore, the offeror's initial offer should represent the vendor's best quote in terms of price and technical acceptability. Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote must contain enough technical information i.e. data sheet, drawing, specification, etc. for evaluation. Your quote will only be evaluated based on the information provided. The award will be made based on lowest evaluated price of RFQ meeting or exceeding the acceptability standards. A determination by the Government not to accept the proposal for not meeting the minimum requirement is solely within the discretion of the Government. Please include the following information with your response: Vendor must provide response to Fill In clauses from Section K with quote. (1) FOB: (Destination preferred) _____________ (2) Shipping Cost if applicable (20684-4013): ______________ (3) IUID Labeling cost if applicable: _____________ (4) Tax ID: _______________ (5) UEID #: ____________ (6) Cage Code: ______ (7) Small Business - Yes ___ No ___ (8) Estimated Delivery Date: ________________ (9) If available on a Pricelist please provide a copy. (10) Total Amount: _____________________
-Combined Synopsis11/02/2026
The Naval Surface Warfare Center Indian Head Division (NSWC IHD) has a requirement for compressor units and spare components for use in existing HVAC systems at NSWC IHD. Trane Original Equipment Manufacturer (OEM) compressors and parts are needed to serve as direct replacements. NSWC IHD intends to award a Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract on a sole source basis to: Boland Trane Services, Inc. 30 W Watkins Mill Rd Gaithersburg, MD 20878 The NAICS code is 333415 and the PSC code is 4120. THIS IS NOT AN INVITATION FOR COMPETITIVE PROPOSALS. This acquisition is being pursued on a sole source basis under the statutory authority of 10 USC 3204(a)(1), as implemented in FAR RFO 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. This notice of intent is not a request for competitive proposals; however, the Government will consider all responses received to this notice. A determination by the Government not to compete this requirement is solely withing the discretion of the Government. No solicitation will be available for this procurement. Information provided herein is subject to change and in no way binds the Government to solicit or award a contract. All responding sources must email their correspondence no later than 3:00 p.m. EST on 09 November 2026 to Bridget Taylor-Shackelford at bridget.m.taylor-shackelford.civ@us.navy.mil. Large files need to be compressed using ZIP and renamed with a .zip file extension.
-Pre-Solicitation11/09/2026

Additional Details

Solicitation Number

N0016708T0159

Archive Date

Jun 27, 2019

Office Address

BETHESDA, MD, 20817-5700