GovChime
Notice ID: 329934cac7204f0e93e49056bd010870Combined Synopsis/Solicitation

Machine and Tensile Test 17-4 Stainless Steel Material

Archived on December 19, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−05:00
Posted
December 2, 2020
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
Agency
Department of WarDepartment of the Navy

Notice details

Office
NSWC CARDEROCK
Place of performance
Bethesda, MD, 20817
Last updated
Dec 4, 2025

Identifiers

Solicitation number
N0016721Q0023
Notice ID
329934cac7204f0e93e49056bd010870

Description

12-02-2020 Revision 2 to include the following revisions; NOTE: The new CLOSE DATE for this solicitation is FRIDAY, 04 DECEMBER 2020 at 1:00 pm ET. A Technical Drawing has been attached. A Revision 2 list of Vendor Questions and Technical Answers has been attached, to include the following verbaige: We would prefer that the specimens be machined to a .252 gauge diameter, as shown in the drawing. Although the drawing and ASTM specification call for a 3 overall length, the samples can still be machined from 2 long blanks by shortening the threaded grip sections. Recognizing that this may not be feasible for all testing equipment setups, it would be technically acceptable for the vendor to machine the samples in accordance with the smaller .160 specimen listed in the ASTM E8 specification instead. The resulting smaller specimens shall be .160 in gauge diameter (+ or .003 ), .640 in gauge length (+ or - .005 ), a minimum of 0.75 in the length of the reduced section, and a minimum fillet radius of .156 . 11-30-2020 Revision 1; A revised list of Vendor Questions and NSWCCD Technical Answers has been attached. 11-30-2020; A list of Vendor Questions and NSWCCD Technical Answers has been attached. This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6 and FAR Part 13.5, as supplemented with additional information included in this notice. Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures to Machine and Tensile Test 17-4 Stainless Steel Material. This announcement constitutes the only solicitation and a written solicitation will not be issued. This requirement is being solicited as 100% total small business set-aside. Quotes are being requested under Request for Quotation (RFQ) no. N0016721Q0023. The NAICS code is 332710 and the business size standard is 500 employees. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2005-95 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20161222. SEE ATTACHED SOLICITATION FOR CLAUSES AND PROVISIONS. The Government will award a contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible quoters on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. Evaluation Factors (See 52.212-2- EVALUATION OF PROPOSALS.) Questions/clarification regarding this solicitation must be submitted via email to kimberly.kanash@navy.mil by Monday, 30 November 2020 11:00 AM EST. All questions will be answered in an amendment to the solicitation. Quote packages are due by 02 December 2020 1:00 PM EST. Late quotes will not be considered. Quote packages shall be sent to kimberly.kanash@navy.mil and contain a cover sheet that provides vendor name, point of contact including name and phone number, and DUNS/cage code number. The Point of Contact for this acquisition is Kim Kanash, at kimberly.kanash@navy.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N0016721Q0023
  1. Combined Synopsis
  1. 4×
    Combined SynopsisCurrentNov 25, 2020

    Machine and Tensile Test 17-4 Stainless Steel Material

    Notice 329934cac7204f0e93e49056bd010870 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
See attached RFQ PDF. Q & A Closes 11/20/2026
49%
Combined Synopsis11/30/2026
48%
Solicitation11/23/2026
48%
Solicitation11/23/2026
General Information This is a solicitation for non-commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR)/Revolutionary FAR Overhaul (RFO) Subpart 13 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland, intends to award a firm-fixed-price (FFP) purchase order using Simplified Acquisition Procedures METAL PARTS This solicitation will be competed as a total small business set-aside. Solicitation Details Quotes are being requested under Request for Quotations (RFQ) Amendment N0017426Q11230001. The applicable North American Industry Classification System (NAICS) code is 332710 and the associated small business size standard is 500 employees. The solicitation document and incorporated provisions and clauses are those in effect through the FAR/RFO. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular (FAC) 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20260507. Technical Drawings If interested, technical drawings/CDRLS need to be requested by contractor prior to submission date. ITAR certification is required to be provided prior to technical drawing release for review. Drawing requests/CDRLS must be made via email to latrice.t.whitfield.civ@us.navy.mil Basis for Award The Government will award a purchase order resulting from this solicitation to the responsible vendor whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a Lowest Price Technically Acceptable (LPTA) basis. The Government intends to evaluate quotations and award a purchase order without discussion. Evaluation Factors: Technical: Quotes must reflect the required specifications and the exact brand specified in the Statement of Work. Price: Quotes must include all applicable costs, including shipping and handling. Questions and Clarifications Questions regarding this requirement must be submitted via email to latrice.t.whitfield.civ@us.navy.mil Submission Instructions Quote packages are due by Nov 13, 2026, at 10:00 AM EST. Late quotes will not be considered. Quote packages shall be sent via email to latrice.t.whitfield.civ@us.navy.mil and must contain a cover sheet that provides the following information: Official Company Name; Point of Contact (including name, email address, and phone number); and Unique Entity Identifier (UEI) and CAGE Code.
48%
Solicitation11/13/2026
Proposed procurement for NSN 4920001403440 ADAPTER,TEST: Line 0001 Qty 7 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0169 DAYS ADO Approved sources are 072E5 178AS460; 23302 178AS460. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
46%
Combined Synopsis11/23/2026

Additional Details

Solicitation Number

N0016721Q0023

Archive Date

Dec 19, 2020

Office Address

BETHESDA, MD, 20817-5700