GovChime
Notice ID: 7fbd25dfde7845b3b56a6ab04a635b12Sources SoughtArchived

Ultra-Wideband Digital Receivers

Archived on August 8, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 AM EDT
Posted
July 14, 2026
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
334290: Other Communications Equipment Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
ONR.ONR NRL.NAVAL RESEARCH LABORATORY
Place of performance
District of Columbia, 20375
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
N00173-26-RFI-RJ03
Notice ID
7fbd25dfde7845b3b56a6ab04a635b12

Description

THIS IS A SOURCES SOUGHT NOTICE (SSN)/REQUEST FOR INFORMATION (RFI) AND NOT A SOLICITATION OR AN INDICATION THAT A CONTRACTUAL COMMITMENT WILL EXIST AS A RESULT OF THIS SSN.

This announcement is not a formal Request for Quotes (RFQ). This SSN/RFI is for informational and planning purposes only and does not guarantee that an award will be made. Any quotes submitted in response to this SSN/RFI are not quotes on which an order will be issued.  The Government assumes NO financial responsibility for any costs incurred. A solicitation package is not available at this time. However, should such a requirement materialize, no basis for claims against NRL shall arise as a result of a response to this SSN/RFI or NRL’s use of such information either as part of our evaluation process or in developing specifications or work statements for any subsequent requirement.

LOCATION: Contracting Office Address: NRL, 4555 Overlook Avenue, SW, Washington, DC 20375

OBJECTIVE: Procure Ultra-Wideband Digital Receivers

General Requirements: 

Following is a list of the salient characteristics of the required four channel wideband digital receiver:

  • Four input channels
  • Only independent tuning for each channel
  • Input frequency range of 100 to 26,500 MHz
  • Tuning resolution of 1 kHz steps at RF
  • Noise Figure (30 dB Gain setting) of 17 dB max, 13 dB typical
  • In Band Input 3rd order intercept point (20 dB Gain) of 0 dBm typical, -7 dBm min
  • Input second-order intercept point of +40 dBm typical, +30 dBm min
  • -20 - +60 deg C operating temperature range
  • Ethernet remote access
  • Analog Devices AD9694 Digitizer
  • TI TMS320C6457 SOM Digital Signal Processor
  • Input bandwidth selections of 100 MHz and 200 MHz
  • Single 40 Gb I/Q Data Transport via QSFP+ port
  • Size of 6.7” x 7.2” x 2.5”
  • Approx weight of 6.5 lbs
  • Power consumption of 9 – 16 VDC input; <55W
  • Cooling: bolt-on fan module
  • Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats
  • Maximum RF input of +15 dBm
  • Gain of +60dB nominal above RF input
  •  90 dB range of manually controlled gain

Following is a list of the salient characteristics of the required single channel 40 GHz ultra-wideband digital receiver:

  • One input channel
  • Input frequency range of 50 to 40,000 MHz
  • Tuning resolution of 1 kHz steps at RF
  • Noise Figure (40 dB Gain setting) of 14 dB typical, 16 dB max
  • In Band Input 3rd order intercept point of 0 dBm typical, -5 dBm min
  • Input second-order intercept point of +25 dBm typical, +20 dBm min (0.5 – 5 GHz), +40 dBm typical, +30 dBm min (5 – 26 GHz),
  • -20 - +60 deg C operating temperature range
  • Ethernet remote access
  • Analog Devices AD9213 Digitizer
  • TI TMS320C6457 SOM Digital Signal Processor
  • Input bandwidth selections of 100 MHz
  • Single 40 Gb I/Q Data Transport via QSFP+ port
  • Size of 4.78” x 6.94” x 2.54”
  • Approx weight of 6 lbs
  • Power consumption of 9 – 16 VDC input; <48W
  • Cooling: bolt-on fan module
  • Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats
  • Maximum RF input of +10 dBm
  • Gain of +20dB nominal above RF input
  • 40 dB range of manually controlled gain

Following is a list of the salient characteristics of the required single channel 26 GHz ultra-wideband digital receiver:

  • One input channel
  • Frequency tuning range of 50 to 26,000 MHz
  • Tuning resolution of 1 kHz steps at RF
  • Noise Figure (40 dB Gain setting) of 14 dB typical, 16 dB max
  • In Band Input 3rd order intercept point of 0 dBm typical, -5 dBm min
  • Input second-order intercept point of +25 dBm typical, +20 dBm min (500 -5000 MHz); +40 dBm typical, +30 dBm min (5,000 – 26,000 MHz)
  • -20 - +60 deg C operating temperature range
  • Ethernet remote access
  • Analog Devices AD9213 Digitizer
  • TI TMS320C6457 SOM Digital Signal Processor
  • Input bandwidth selections of 100, 250, 500, 1000, 2000 MHz for a tuned frequency>2GHz; 100 MHz for tuned frequencies 300 - 2000 MHz
  • Dual QSFP28 Streaming I/Q Data Interfaces
  • Size of 5.53” x 6.94” x 2.10”
  • Approx weight of 6.5 lbs
  • Power consumption of 9 – 16 VDC input; <45W
  • Cooling: bolt-on fan module
  • Digitized IF Output of IQ data in SDDS, SDDSX, VITA-49 formats
  • Maximum RF input of +10 dBm
  • Gain of +40dB nominal above RF input
  • 40 dB range of manually controlled gain

REQUIRED CONTRACTOR RESPONSE FORMAT:

Interested parties, at a minimum, shall supply all of the below required information in a Capability Statement.

1. CONTACT INFORMATION:

a) Company Name and Address

b) Point of Contact for questions/clarification

c) Telephone Number and e-mail address

d) CAGE Code, and business size

e) NAICS and PSC Code of the proposed solution (SEE https://psctool.us)

f) Business Size Standard /Socioeconomic Categories

2. TECHNICAL INFORMATION:

a) List of capabilities/resources relevant to the above specifications.

b) Questions for the Technical team regarding changes/suggestions to the specification list to add clarity.  (Questions will not receive a response but will be provided to the technical team for consideration in preparing the final specification.)

3. COMMERCIALITY OF PROPOSED ITEM:

a) Whether item(s) offered/proposed is a commercial item offered by your company and/or customarily used by the general public or non-government entities for other than Government purposes.

b) Whether the item has been sold, leased, or licensed to the general public, and if so, identify one or more such sales, leases, or licenses to document the commerciality of the item.

4. PRODUCT DESCRIPTION:

a) Provide a description of how the proposed product will meet or exceed each of the required technical specifications.

b) Provide a product brochure and highlight the areas that meet or exceed specifications.

5. PAST PERFORMANCE:

A list of contracts or task orders that are similar to that required under the attached Specification.

6. MULTIPLE AWARD SCHEUDLE CONTRACT:

a) Indicate whether products and services are all available on a GSA contract, or similar vehicle.

b) Provide applicable GSA or other contract number.

7. ADDITIONAL REQUIREMENT DETAILS:

Responses should be no more than 5 pages.

FAR PROVISION(S):

FAR 52.215-3 -- REQUEST FOR INFORMATION OR SOLICITATION FOR PLANNING PURPOSES (OCT 1997)

(a) The Government does not intend to award a contract on the basis of this solicitation or to otherwise pay for the information solicited except as an allowable cost under other contracts as provided in subsection 31.205-18, Bid and proposal costs, of the Federal Acquisition Regulation.

(b) Although "proposal" and "offeror" are used in this Request for Information, your response will be treated as information only. It shall not be used as a proposal.

(c) This solicitation is issued for the purpose of: market research and procurement planning.

(End of Provision)

FAR 52.211-6 -- BRAND NAME OR EQUAL (AUG 1999)

(a)  If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b)  To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must-

           (1)  Meet the salient physical, functional, or performance characteristic specified in this solicitation;

           (2)  Clearly identify the item by-

                (i)  Brand name, if any; and

                (ii)  Make or model number;

           (3)  Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

           (4)  Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c)  The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d)  Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Ultra-Wideband Digital Receivers

    Notice 7fbd25dfde7845b3b56a6ab04a635b12 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Naval Research Lab (NRL) intends to award a firm-fixed-price contract to Midwest Microwave Solutions, LLC. in accordance with 41 U.S.C. 1901, for the acquisition of Midwest Microwave Solutions Model XRE-26G-4-IND: Four-Channel 26 GHz Wideband Digital Receivers; Model WRX-40G-1000t-EC: Ultra-Wideband 40 GHz Microwave Digital Receivers; and Model WRX-26G-2000: Ultra-Wideband 26 GHz Microwave Digital Receivers. The requirement is deemed to be available only from the stated source as no other company is able to provide the supply items with the given required salient characteristics. Interested persons may identify their interest and capability to respond to the requirement or submit quotations. This notice of intent is not a request for competitive proposals and does not constitute a solicitation. However, all capability statements received prior to the closing date shall be considered by the Government. A determination by the Government not to compete this proposed action based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. If your organization has the capability of providing these supplies NRL asks that interested parties, at a minimum, supply the following information: Business name and address; Name of company representative, business title and email; Telephone number, address, and e-mail address of POC Large or Small Business Size and Type of Small Business (if applicable); Cage Code; UEI Number; A brief capabilities statement package (no more than five pages) demonstrating their ability to perform the services required under this posting. Demonstrated past performance providing similar services should be detailed, if applicable. All information and data received in response to this posting marked or designated as corporate or proprietary information will be protected as such. Please include this notice number on all documents and email correspondence. Classified Material shall not be submitted. Please transmit responses by e-mail to Graham Irby, Contract Specialist, at graham.d.irby.civ@us.navy.mil in either Microsoft Office or .pdf format. All responses must be received on or before the time specified in the announcement.
-Pre-Solicitation11/10/2026
The Government intends to award a firm-fixed-price contract to Cornet Technology, Inc. as a sole-source (other than full and open competition) Basic Ordering Agreement (BOA) task order. This requirement is for the organic Lead Systems Integrator (oLSI) for the Naval Air Warfare Center Aircraft Division (NAWCAD), Webster Outlying Field (WOLF) operating under a product-based business model whereby NAWCAD WOLF civilians lead and manage the execution of the requirements with combined Government-Industry teams. Using this oLSI approach, the Government maintains control of intellectual property and data rights, enabling WOLF to rapidly adapt solutions to the dynamic needs of the warfighter. This requirement is for integration and installation, testing, site support, hardware and software maintenance, training, and hardware for the Tactical Voice Conferencing System (TVCS) OMNI system. The TVCS OMNI system, a replacement to the TVCS mid-range (MR) end-of-life system, is a Marine Corps Risk Management Framework (RMF) accredited communications, conferencing, and interconnect solution that provides radio and telephone conferencing functionality. The TVCS OMNI system fulfills a vital role in Command, Control, Communications, Military Air Management Control, and Mission Control. The function and purpose of the TVCS OMNI system is to provide Marine Corps Range Operators with secure and non-secure sea, air, and ground communications as well as the ability to communicate across networks with both secure and non-secure radios and telephones with carrier-class reliability. This acquisition is being pursued on a sole source basis under the statutory authority of Title 10, U.S.C. Section 3204(a) (1), as implemented by Federal Acquisition Regulation (FAR) 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. A determination by the Government not to compete this effort is solely within the discretion of the Government. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract, or to be responsible for any monies expended by any interested parties before award of a contract for the effort described above. This notice of intent is neither a request for proposal nor a solicitation of offers. This synopsis is provided for information purposes only. A determination not to compete this requirement is solely within the discretion of the United States Government. For subcontracting opportunities, please visit Cornets website at:https://cornet.com/
-Pre-Solicitation10/29/2026
NSN --015052776-, TDP VER 001, REF , QTY 1 , DELIVERY FOB
-Solicitation11/26/2026
NSN --013343121, NOMEN - COVER,ELECTRONIC CO, TDP VER 001, REF , QTY 2 , DELIVERY FOB Origin (Shipping Point)
-Solicitation11/19/2026
NSN --015052776-, TDP VER 001, REF , QTY 1 , DELIVERY FOB This is a sole source requirement. The Government physically does not have in its possession sufficient, accurate, or legible data to contract with other than the current source. One or more of the items under this acquisition are subject to Free Trade Agreements. (FAR 52.225-3). One or more of the items under this acquisition are subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. (FAR 52.225-5). These items require Government Source Approval prior to award. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP WSS Source Approval Brochure which can be obtained on the internet at https://www.navsup.navy.mil/navsup/ourteam/navsupwss/business_opps . Offers received which fail to provide all data required by the source approval brochure will not be considered for award under this solicitation. For information or questions regarding this notice, please contact marisa.l.tetkowski.civ@us.navy.mil.
-Pre-Solicitation11/23/2026

Additional Details

Solicitation Number

N00173-26-RFI-RJ03

Archive Date

Aug 8, 2026

Office Address

WASHINGTON, DC, 20375-5328