Notice ID: c5e8a6056a2f4d2db80ab1f74642f5efSpecial Notice
TWIN OTTER INTERNATIONAL LTD
Archived on August 16, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 AM UTC−04:00
- Posted
- August 13, 2024
- Notice type
- Special Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 488190: Other Support Activities for Air Transportation
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAL RESEARCH LABORATORY
- Place of performance
- Las Vegas, NV, 89120
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N0017324Q5644
- Notice ID
- c5e8a6056a2f4d2db80ab1f74642f5ef
Description
NOTICE OF INTENT TO AWARD A SOLE SOURCE This Notice of Intent is not a request for competitive proposals. This is not a solicitation or request for offers. No solicitation package is available and email requests will not be honored. Only one responsible source and no other supplies or services will satisfy agency requirements. The Naval Research Laboratory (NRL) intends to award a sole source purchase order to TWIN OTTER INTERNATIONAL of LAS VEGAS, NEVADA to furnish: Aircraft Equipment Installation Requisite Safety Check Acquire Certifications and Permits Round Trip Transportation Supplies,Fuel, and Pilots Equipment De-installation The North American Industry Classification System Code (NAICS) for this requirement is 488190 with the size standard of 40,000,000. The Federal Supply Code (FSC) / Product Service Code (PSC) procurement is J015 This purchase will be made utilizing Simplified Acquisition Procedures in accordance with: Federal Acquisition Regulation (FAR) Part 13.106-1(b) for purchases not exceeding the simplified acquisition threshold of $250,000. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government. No reimbursement for any cost connected with providing capability information will be provided. The point of contact is: Andrea Graves, email: andrea.l.graves6.civ@us.navy.mil Please reference this Notice of Intent number, N00173-24-Q5644 on your correspondence and in the Subject line of your email.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0017324Q5644- 3×Special NoticeCurrentAug 13, 2024
TWIN OTTER INTERNATIONAL LTD
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
1.0 INTRODUCTION a. The Naval Air Warfare Center Aircraft Division (NAWCAD), Naval Test Wing Atlantic (NTWL), Air Test and Evaluation Squadron TWO ONE (HX-21), Patuxent River, MD, has a follow-on requirement for Contractor Maintenance Support (CMS) Services to perform Organizational Level (O-Level) maintenance support services on assigned CH-53K test aircraft. This Market Research tool is being used to identify potential and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Sources Sought will be utilized to determine if any Small Business Set[1]Aside opportunities exist. Additionally, this Sources Sought is being used to gather constructive information from industry to improve the Request for Proposal (RFP). This is for the NAWCAD HX-21 CH-53K O-LEVEL CMS. This is a follow-on requirement. The current contract information can be found in Section 3.0, paragraph b below. There have been significant changes to the scope as follows: estimated on-site personnel increasing from 62 FTEs to 75 FTEs. This is not subject to bundling or consolidation. b. The following documents are attached to this Sources Sought Notice: Draft Performance Work Statement (PWS) Draft Labor Categories and Staffing Matrix Draft Personnel Qualifications c. The following dates are anticipated time frames associated with this requirement: Estimated Draft RFP Release: 01 May 2027 Estimated Final RFP Release: 01 Aug 2027 Estimated Award Date: 01 May 2028 Period of Performance: 19 Aug 2028 – 18 Aug 2033 d. Primary Work Location/Place of Performance: Primary Work Location is detailed in Attachment 1, Draft PWS. 2.0 DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 ANTICIPATED CONTRACT TYPE AND CONTRACT/PROGRAM BACKGROUND a. Anticipated Contract Type: C-Type Contract with Firm Fixed Price (FFP) CLINs for Labor and Cost Reimbursable CLINs for associated Other Direct Costs (ODCs). The Government is anticipating an additional Cost Reimbursable Performance Incentive CLIN. The anticipated Period of Performance includes one base period of 12 months with four one[1]year option periods for a total potential performance period of 5 years. b. The incumbent contract information is as follows: Incumbent Contractor: Adams Communication & Engineering Technology, Inc. Contract Number: N68520-20-D-0032 / N00421-23-F-0619 Contract End Date: 13 Aug 2028 Contract Type: FFP Previous Set-Aside Designation: Veteran-Owned Small Business (VOSB) Number of FTEs on the Contract: 62 FTEs c. Program Background: HX-21 has a follow-on requirement for CMS Services to perform O-Level (to include limited Intermediate Level (I-Level) and Depot Level (D[1]Level)) maintenance support services and other explicit test support tasks required to maintain assigned CH-53K aircraft to the proper standards required to meet the requirements of the HX-21 test schedule. The test schedule includes both flight and ground test events to meet the PMA-261 and other requirement owner program performance needs. The limited I-Level and D-Level work is contingent, provided skilled artisans and required tools are available and authorization is received from the cognizant authority. Services include aircraft maintenance and logistics support on aircraft, aircraft systems, and Support Equipment (SE) for which HX-21 has cognizant responsibility. Additional services include maintenance of prototype aircraft components, configuration and installation of internal/external ballast, and Helicopter Support Team (HST) duties, i.e. external sling load operations. The majority of work performance will be accomplished at Patuxent River, Maryland. Additional temporary work sites in direct support of projects are executed as detachments and include (but are not limited to) United States Naval Vessels, Department of War Installations, and Commercial Facilities which also encompass unscheduled emergent type maintenance support. A more detailed description is provided in Attachment 1, Draft PWS. 4.0 SPECIAL REQUIREMENTS AND REQUIRED CAPABILITES Any anticipated special requirements and required capabilities are detailed in Attachment 1, Draft PWS. This document details security clearance requirements for personnel, facility requirements, and any specific certifications that are required for the performance of this requirement. 5.0 ELIGIBILITY a. The applicable NAICS code for this requirement is 488190, Other Support Activities for Air Transportation, with a Small Business Size Standard of $40.0M. b. The Product Service Code is J015, Maintenance, Repair, and Rebuilding of Equipment: Aircraft and Airframe Structural Components. c. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2020-O0008 dated 04/03/20 at https://www.acquisition.gov/browse/index/far). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize “similarly situated entities” to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the Sources Sought Notice (SSN) in order to assist the Government’s capability determination. 6.0 SUBMISSION REQUIREMENTS a. Interested parties should address the following questions in their response. The responses to these questions will aid the Government in determining whether a company is capable in performing the requirement, so it is important to address these areas with specific details. Organizational-Level Maintenance on Navy/Marine Corps Rotary Wing Aircraft. List all type/model rotary wing aircraft supported and total number of each within the past five years. Place emphasis on any modern fly-by-wire aircraft. Support ground and flight operations to include launch/recovery of rotary wing aircraft and hot pressure refueling. Describe all experience with ground and flight operations to include launch/recovery of rotary wing aircraft and hot pressure refueling. List all type/model aircraft and locations / supported organization. Safe for Flight (SFF) experience. The Contractor will be required to undergo a NAVAIR-led SFF Certification Inspection prior to commencing maintenance activities. Describe all experience with U.S. Navy SFF certification or similar experience. List all type/model aircraft and locations/supported organization. Cargo Capabilities. The CH-53K aircraft will regularly be reconfigured with internal cargo/ballast configurations and conduct external cargo loading using Helicopter Support Team procedures. State any experience with loading / rigging of internal and external slung cargo. Maintenance Training. State any experience with training a maintenance workforce on a new aircraft. List all type/model aircraft and locations / supported organization. Offsite Detachment Work. List all locations where work was performed while temporarily operating away from the primary work facility (within the last three years), to include shipboard operations on US Navy vessels. Recruitment Strategies. There is a limited community of CH-53K experienced maintenance personnel due to recent fleet fielding. List any experience with recruiting uniquely experienced personnel for “hard to fill” positions. Performance Incentives. State any experience with providing additional non-discretionary wages to SCA Labor hourly employees as a result of awarded performance incentives. Please note that under a Small-Business Set-Aside, in accordance with FAR 52.219-14, the small business prime must perform at least 50% of the work themselves in terms of the cost of performance. Provide an explanation of your company’s ability to perform at least 50% of the tasking described in this PBSOW for the base period as well as the option periods. Similarly situated small businesses may team together to meet the 50% requirement. If your company is planning to team with a similarly situated small business, the response must clearly identify the proposed team members and the capability statement must clearly articulate which portion of the work each team member will be responsible for. The response must be detailed enough for the Government to make a determination whether or not the proposed team will be able to perform 50% of the work when combined. Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, Unique Entity Identifier (UIE) number, etc. Respondents to this notice also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business Concern under the NAICS code identified for this requirement. b. In addition to the above, the Government is requesting feedback on the draft PWS, draft labor categories and staffing matrix, and draft estimated labor rates by labor category. If there is any feedback on any of these documents, please include that within the capabilities statement submission. Specific details are requested to help in supporting the feedback. This feedback DOES NOT count against the page limitations for the capabilities statement and should be submitted as a separate file at the same time as the capabilities statement submission. The Government may or may not reach back out to the companies to discuss the feedback in depth. c. Interested parties shall adhere to the following instructions for the submittal of their capabilities statements. Page Limit and Format: Ten (10) 8.5 X 11 inch pages in Times New Roman font of not less than 10 point. Document Type: Microsoft Word, Adobe PDF, etc. Delivery: Electronic-mail (Email) Submission to the Contract Specialist, Kelly Abrams at kelly.l.abrams.civ@us.navy.mil Response date: Responses are due by 2:00PM EDT on 25 NOV 2026. No classified information shall be submitted in response to this Sources Sought. No phone calls will be accepted. All questions must be submitted via email to the Contract Specialist, Kelly Abrams at kelly.l.abrams.civ@us.navy.mil. All responses shall include Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, and Points of Contact (POC), including names, phone numbers, and email addresses. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. | 67% | Market Research | 11/25/2026 |
DESCRIPTION: The Naval Air Systems Command (NAVAIR) is seeking qualified sources that can provide commercial Depot-level Maintenance, Repair, and Overhaul (MRO) services for the United States Navy (USN) MH-60R/S helicopters at Naval Station (NS) Rota, Spain. The support includes Planned Maintenance Interval (PMI) and In Service Repair (ISR) of the MH-60R and MH-60S aircraft in accordance with the H-60 Integrated Maintenance Plan (IMP). Specific performance requirements include planning, managing, and organizing internal controls which will require furnishing all necessary personnel, access to facilities, equipment, materials, supplies, testing equipment, and management to rework, overhaul, and test items to conform to the IMP and established Turnaround Times (TATs). It is anticipated the Government will award a Firm Fixed Price (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) with a one-year base period and four (4) one-year option periods. This market research tool is being utilized to identify capable firms, of all sizes, prior to finalizing the method of acquisition. This notice should not be construed as a formal solicitation or an obligation on the part of the Government of the United States to acquire any parts or services. Any information provided to the Government is strictly voluntary and at no cost to the Government. REQUIRED CAPABILITIES: The contractor will be required to perform MH-60R/S PMI in alignment with PMA-299 IMP on approximately two to four (2-4) aircraft per year onboard NS Rota, Spain. The anticipated total annual aircraft inductions is an estimate only and subject to change during development of this requirement These PMI events include all MH-60R/S requirements outlined in A1-H60-IMP-000, inspection bulletin compliance, and conducting preventive, corrective, and investigative maintenance. Additionally, completion of Technical Directive (TD) incorporation, In Service Repair (ISR), and maintenance to facilitate Intermediate (I) and Organizational (O) Level requirements will be required. PMI and ISR work include both scheduled and unscheduled requirements: 1. Scheduled Maintenance: PMI-1N and PMI-2N requirement includes airframe, systems, and component inspection through visual and Non-Destructive Inspection (NDI) methods, defect correction, preventative maintenance, operational checkouts, and Technical Directive compliance. The required TAT thresholds for PMI-1N and PMI-2N are 120 and 135 calendar days, respectively. The IMP requirements for aircraft subject to this process are the minimum requirements, formulated and established to the depth required to ensure the reliability, operational availability, safe operation and airworthiness of the aircraft for the duration of the established service period. The IMP will provide depot support throughout the total service life of the aircraft. 2. Unscheduled Maintenance: Unscheduled Maintenance are the tasks that are not related to a specific IMP Scheduled Maintenance requirement and is further divided into 4 subcategories: a. Over and above (O&A) O&A tasks are repairs performed concurrent with a PMI event. Refer to the Defense Acquisition Regulation Supplement (DFARS) 252.217-7028 for a thorough description of Over and Above Work. b. In-Service Repairs (ISR) ISR requests are for depot-level repairs on inducted and non-inducted aircraft. ISR work may require the Contractor to dispatch personnel as a contractor field service team (CFT) to perform aircraft repairs at remote locations. c. Customer Service Request (CSR) CSR requests come from operational fleet or the MH-60R/S T/M/S program office for both inducted and non-inducted aircraft. CSR requirements include, but are not limited to Organizational and Intermediate level maintenance. CSR work may require the Contractor to dispatch personnel as a CFT to perform aircraft repairs at remote locations. d. Depot-Level Technical Directives (TD) TD (aircraft modification and bulletins) shall be accomplished either concurrently with PMI events or as standalone actions. The Government will normally provide technical directive kits, special materials, and special Support Equipment (SE) required for completing modifications. Base and Facility Access: All Contractor personnel must be eligible for and obtain perpetual base access at NS Rota, Spain for the duration of the contract. This requires submitting all necessary documentation for a Tarjeta Especial de Identificacion (TEI) to be granted base access in accordance with host nation and base security statutes. To obtain TEI all required forms must be submitted for each employee 60 days prior (and then annually 60 days before expiration, or more frequently as required by base and host nation statutes). As part of this requirement, the contractor must provide insurance from a company listed on an EU Mercantile Registry and documented on a Certificate of Insurance. CAPABILITIES STATEMENT REQUIREMENTS: Interested responsible sources are requested to submit a brief capabilities statement package (no more than 12 pages in length, single-spaced, 12-point font minimum) demonstrating ability to perform the tasking listed under the required capabilities by addressing the following: Company Name, Address, Business Size, and Point-of-Contact (POC) Name, Phone Number, Fax Number, and Email Address. Company Profile to include number of employees, annual revenue history, office location(s), UEI Number, Cage Code Number, and a statement regarding current small/other than small business status. Prior and current corporate experience performing aircraft maintenance or MRO services of similar size and scope to the tasking described under “Required Capabilities” within the last three (3) years, including a brief description of how the referenced contract or effort relates to those tasks. Management approach to staffing this effort with qualified technical personnel in an overseas environment. Company’s ability to begin performance upon contract award. Whether the company has managed a team of subcontractors before, with details, including contracts and teaming arrangements. An explanation of the specific technical skills the company possesses which ensures capability to perform the tasks. Outside the Continental United States (OCONUS) and Host-Nation Operational Experience: Detail experience executing aviation depot-level maintenance or similar complex technical tasks specifically within the Kingdom of Spain, including compliance with the U.S.-Spain Agreement on Defense Cooperation (ADC), Spanish labor laws, and base access protocols at military installations such as NS Rota, Spain. If your company does not possess direct experience operating in Spain, detail your experience managing similar aviation depot-level maintenance tasks in other OCONUS environments, specifically addressing your corporate capability, timeline, and mitigation strategy to establish host-nation legal compliance and base access within the required schedule constraints. The U.S. Government will provide special tooling including MH-60 Peculiar and Common SE, and Test, Measurement, and Diagnostic Equipment (TMDE) as Government-Furnished Property (GFP) for this effort. Describe your firm’s capability to provide common contractor-furnished hand tools, Individual Material Readiness List (IMRL) items, and any logistical approach to managing the inventory and calibration requirements of the GFP on-site. Execution of PMI-2N requires a certified aircraft strip and paint facility capable of housing H-60 aircraft located at NS Rota. The U.S. Government does not own such a facility. Please provide documented evidence of your firm's current access to, or lease of, a certified aircraft paint and strip booth at NS Rota, that is approved for use on military aircraft. If access is not currently held, detail your specific plan and timeline to acquire compliant facility access without impacting the Navy's operational requirements. If the company is a small business, provide an explanation of the company's ability to comply with FAR 52.219-14 (Limitations on Subcontracting) requirements. Respondents to this notice must also indicate whether they are an Other than Small Business or qualify as a Small, Small Disadvantaged, Small Disadvantaged Veteran Owned Small Business Women-Owned, 8(a), Hub Zone or Service Disabled Veteran-Owned Small Business Concern. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted via email to samantha.r.shorter.civ@us.navy.mil and lauren.r.martz.civ@us.navy.mil, in either Microsoft Word or Portable Document Format (PDF). The deadline for response to this request is 4:00 p.m., Eastern Daylight Time, 14 December 2026. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be protected. Information and materials submitted in response to this request WILL NOT be returned. Classified material SHALL NOT be submitted. No phone calls will be accepted. All questions must be submitted via e-mail. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to these Sources Sought. | 63% | Market Research | 12/14/2026 |
AMENDMENT 0007 - The purpose of this amendment is to extend the proposal due date to 08 December 2026. Please access Amendment 0007 via the PIEE Solicitation Module link listed within the Attachments section of this notice. | 63% | Solicitation | 12/08/2026 |
Second Update to Soliciation: The quote/proposal deadline has been extended to 1100 EST on 10 November 2026. Update to Solicitation: The quote/proposal deadline has been extended to 1300 EST on 09 November 2026. We are providing both the conformed copy and SF-30. Offorers are encouraged to utilize the conformed copy due to readability issues with the SF-30. Questions recieved have been added to Section A with their respective answers. Solicitation Information: N6852027Q1011 is issued as a competitive procurement prepared In Accordance With (IAW) Federal Acquisition Regulation (FAR) Overhaul Part 12 Acquisition of Commercial Products and Commercial Services. Fleet Readiness Center East (FRCE), has a requirement to depaint, repaint, and conduct weight and balance on two C/KC-130 aircraft. Full Statement of Work (SOW) is provided in the attached RFQ N6852027Q1011. Contract Type: The Government intends to purchase on a firm fixed-price basis. Offerors must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoW contract. This may be accomplished electronically at http://www.sam.gov. Expenses incurred in the preparation of quotes in response to this RFQ are the vendor's sole responsibility and not reimbursable by the Government. All quotes/responses shall be submitted via email to Daniel Collins at Daniel.h.collins4@us.navy.mil no later than 13:00PM Eastern Standard Time on 05 November, 2026. ***Basis for Award*** Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote will only be evaluated based on the information provided. The award will be made on the basis of Past Performance, Technical Capability, and Price. A determination by the Government not to accept the proposal for not meeting the minimum requirement is solely within the discretion of the Government. ***Instructions to offeror’s*** Please include the following information with your response: 1. Blocks 30a-c signed on page 1 of N6852027Q1011 2. Acknowledgement via email confirming attachments have been reviewed 3. FOB: (Destination preferred) 4. Shipping Cost if applicable: 5. Cage Code: 6. Small Business: Yes ___ No ___ 7. Estimated Delivery Date: 8. If available on a Pricelist please provide a copy. 9. Total Amount: _____________________ | 63% | Combined Synopsis | 11/10/2026 |
1. Purpose This Sources Sought Notice is issued for market research purposes only. The Government is seeking information from capable and interested businesses, including small businesses, that can provide systems engineering support for integration and test of Mode 5, Traffic Alert and Collision Avoidance System (TCAS), and surveillance cloaking capability into two United States Marine Corps (USMC) Boeing C-40A Clipper aircraft. This notice is not a solicitation, request for proposal, request for quotation, invitation for bid, or commitment by the Government to award a contract. The Government will not reimburse respondents for costs associated with preparing or submitting a response. Information received will be used to assess the availability of qualified sources, determine the extent of small-business capability, and inform the Government’s acquisition strategy. 2. Requirement Description The Government anticipates a requirement for systems engineering, avionics integration, and test support associated with incorporation of surveillance capability into two USMC Boeing C-40A Clipper aircraft. The anticipated place of performance is Naval Air Station Patuxent River, Maryland. Additional travel or support at other Government or contractor locations may be required, as identified in any future solicitation or statement of work. The anticipated effort includes engineering analysis, integration planning, interface assessment, configuration management, installation support, ground- and flight-test planning and execution, anomaly resolution, technical-data development, and technical program support. The effort requires integration of the following avionics equipment: APX-119-540 Transponder — P/N 4079100-0540 Digital Control Panel (DCP) — P/N 4087561-0503 KIV-79 Crypto Applique — P/N 4079080-0503 Personality Module (PM) — P/N 4088953-0501 TPA-100B Traffic Alert and Collision Avoidance System (TCAS) Computer — P/N 940-0351-010 3. Anticipated Scope Potential sources should be capable of providing the following, as applicable: Review and analyze aircraft-level, system-level, and equipment-level requirements. Develop or update systems-engineering artifacts, interface-control documentation, integration plans, test plans, test procedures, and test reports. Assess aircraft electrical, mechanical, software, data-bus, antenna, display, and avionics interfaces associated with the identified equipment. Support aircraft modification planning, installation, and integration activities. Provide configuration-management, engineering-change, and technical-data support. Develop and execute, or support execution of, ground- and flight-test activities. Document test results, discrepancies, corrective actions, and recommended resolutions. Support Government-directed airworthiness, certification, operational test, or other approval activities, as applicable. Participate in technical interchange meetings, program reviews, risk-management activities, and status reporting. 4. Requested Capability Statement Interested parties are requested to submit a concise capability statement addressing the following: A. Company Information Company name, address, CAGE Code, and Unique Entity Identifier, if applicable. Business size and socioeconomic status under NAICS 488190. Primary technical and contracting points of contact, including telephone number and email address. B. Relevant Experience Experience within the past five years supporting systems engineering, modification, integration, testing, or sustainment of Boeing 737-derived aircraft, military transport aircraft, or comparable aircraft platforms. Experience integrating Mode 5/Identification Friend or Foe, transponder, TCAS, surveillance, cryptographic, or comparable mission-avionics systems. Experience with the specific avionics equipment identified in this notice, if applicable. Up to three relevant completed or ongoing efforts, including a short description of the work performed, period of performance, customer type, and the respondent’s role. C. Technical Capability Available systems-engineering, avionics-engineering, aircraft-electrical-engineering, software-engineering, test-engineering, flight-test-support, configuration-management, and technical-data capabilities. Capability to support integration planning, aircraft modification activities, ground testing, flight testing, troubleshooting, and discrepancy resolution. Relevant facilities, test equipment, engineering tools, specialized personnel, and other resources available to support this effort. Any anticipated Government-furnished equipment, Government-furnished information, technical-data, facility-access, or other support requirements. D. Teaming and Acquisition Input Whether the respondent intends to participate as a prime contractor, subcontractor, or teaming partner. Potential teaming arrangements and anticipated subcontracting requirements. Recommended acquisition approach, contract type, estimated period of performance, and major schedule considerations. Significant technical, supply-chain, schedule, airworthiness, test-resource, data-rights, or other risks the Government should consider. 5. Submission Instructions Responses shall be submitted electronically in PDF format no later than 12:00 p.m. on Thursday, November 5, 2026, to: Will Dagenhart william.j.dagenhart.civ@us.navy.mil The email subject line shall read: “Sources Sought Response – USMC C-40A Mode 5/TCAS/Surveillance Cloaking Integration Support – [Company Name]” Respondents shall clearly identify proprietary information contained in their responses. Do not submit classified, export-controlled, or otherwise sensitive information unless specifically authorized and transmitted through an approved Government process. 6. Disclaimer THIS SOURCES SOUGHT NOTICE IS FOR PLANNING AND MARKET-RESEARCH PURPOSES ONLY. IT DOES NOT CONSTITUTE A SOLICITATION OR GUARANTEE THAT THE GOVERNMENT WILL ISSUE A SOLICITATION OR AWARD A CONTRACT. THE GOVERNMENT MAY USE INFORMATION RECEIVED TO DETERMINE THE AVAILABILITY OF CAPABLE SOURCES AND EVALUATE POTENTIAL SMALL-BUSINESS PARTICIPATION OPPORTUNITIES. | 63% | Market Research | 11/05/2026 |
Additional Details
Solicitation Number
N0017324Q5644
Archive Date
Aug 16, 2024
Office Address
WASHINGTON, DC, 20375-5328