Notice ID: 34cd9929a492409985ebde379cb6bee1Combined Synopsis/Solicitation
NRL Dual Chamber Thin Film Sputter Deposition System
Archived on October 5, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM UTC−04:00
- Posted
- September 16, 2024
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 333242: Semiconductor Machinery Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAL RESEARCH LABORATORY
- Place of performance
- Washington, 20375
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- N0017324QDH01
- Notice ID
- 34cd9929a492409985ebde379cb6bee1
Description
The purpose of this amendment is to post Q&A received during the Q&A period. Original: The Naval Research Laboratory’s (NRL) has a requirement for a dual-chamber sputter deposition system to be used for deposition of dielectric and metallic thin films in accordance with the attached specifications.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Deirdre Hughes
Secondary Contact
Jason Calandruccio
Documents
No documents available.
Lifecycle
Solicitation:
N0017324QDH01- Combined Synopsis
- 2×Combined SynopsisCurrentSep 12, 2024
NRL Dual Chamber Thin Film Sputter Deposition System
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Mission System R and D Support for Blossom Point Tracking Facility (BPTF) | - | Solicitation | 12/19/2026 |
COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, "Streamlined Procedures for Evaluation and Solicitation for Commercial Items," as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation document will not be issued. Joint Certification Program, (JCP) Registered Vendors Only. Drawing is controlled. Interested bidders shall email Ms. Marche Hampton and cc Ms. Katrina Gallagher the following required information: Vendor Name, Cage Code and JCP Certification Number. This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 Effective: 03/13/2026 This is a Total Small Business competitive announcement in accordance with 19.502-2 (a) on a Firm-Firm Fixed-Price (FFP) basis. The associated North American Industrial Classification System (NAICS) code for this procurement is 334519, The associated Federal Supply Code (FSC) / Product Service Code (PSC) procurement is 5340 The Naval Research Laboratory (NRL), located in Washington, DC, is seeking to purchase: RADOME BAND CLAMPS All interested companies shall provide quotations for the following: See specification attachment Supplies: BRAND NAME OR EQUAL. Items must be brand name or equal in accordance with FAR 52.211-6. This procurement is for new equipment ONLY, unless otherwise specifically stated. No remanufactured or "gray market" items are acceptable. All equipment must be covered by the manufacturer's warranty. Vendor shall be an Original EquipmentManufacturer(OEM), an OEM authorized dealer, an authorized distributor, or an authorized reseller for the proposed equipment/system such that OEM warranty and service are provided and maintained by the OEM. All software licensing, warranty, and service associated with the equipment/system shall be in accordance with the OEM terms and conditions Offerors are required to submit documentation from the manufacturer stating that they are an authorized distributor for the specific items being procured. Note: Maintenance Renewals - The performance period for maintenance renewals, (software licenses, services, etc.), must begin on or after the date of contract award. The performance period cannot be back dated. If reinstatement fees are required, they must be listed on separate line items. Delivery Address: U.S. Naval Research Laboratory 4555 Overlook Avenue, S.W. Bldg.49 Shipping/Receiving Code 3400 Washington, DC 20375 **FOB DESTINATION IS THE PREFERRED METHOD** Estimated Delivery Time: For FOB ORGIN, please provide the following information: FOB Shipping Point: Estimated Shipping Charge: Dimensions of Package(s): Shipping Weight: SUBMISSION INSTRUCTIONS: All Quoters shall submit 1 (one) copy of their technical and price quote. Include your company DUNS Number and Cage Code on your quote. All quotations shall be sent via e-mail. GOVERNMENT POINT OF CONTACT Purchasing Agents Name: Ms. Marche Hampton Email: Marche.T.Hampton.civ@us.navy.mil CC: Ms. Katrina Gallagher, Email: katrina.t.gallagher.civ@us.navy.mil Please reference this combined synopsis/solicitation number on your correspondence and in the "Subject" line of your email. ALL QUESTIONS REGARDING THE SOLICITATION SHALL BE SUBMITTED VIA EMAIL. System for Award Management (SAM). The government intends to award a purchase order as a resuIt of this combined synopsis/solicitation that will include the terms and conditions set forth herein. Award may be made without discussions or negotiations, therefore prospective contractors shall have an active registration in the System for Award Management (SAM) database (www.sam.gov) in accordance with Federal Acquisition Regulation (FAR) Part4.1102 and Part 52.204-7 when submitting a response to this solicitation. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors con sidered. The following factors shall be used to evaluate offers: Lowest Price Technically Acceptable - Offers will be ranked lowest to highest according to price. A price analysis will be conducted to determine whether the lowest price will result from a single award or multiple awards. Based on the price analysis, the lowest price offer or multiple offers, will be forwarded to the requiring activity for technical evaluation (offer(s), in accordance with the specifications, will be deemed either technically acceptable or technically unacceptable). If the lowest price offer or offers is found technically acceptable and the pricing determined fair and reasonable by the Contracting Officer, evaluation will be deemed complete and award will be made based on the lowest price offer(s). If the lowest price offer is determined technically unacceptable, another analysis will be conducted amongst the remaining offers to determine if a single or multiple awards will provide the lowest price. The lowest price offer(s) will be sent for technical evaluation. This process is repeated in order of price until an offer or combination of offers is deemed technically acceptable and price is determined fair and reasonable. Table A-1. Technical Acceptable/Unacceptable Ratings: I Rating Acceptable I Description Quote meets all the minimum requirements/specifications as Istated or provided in the RFQ specifications. I Unacceptable Quote does not clearly meet the minimum requirements/specifications as stated or provided in the RFQ specifications. Options. When applicable, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). Terms and Conditions. To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Exceptions. Quoter shall list exception(s) and rationale for the exception(s). Submission shall be received not later than the response date listed above. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). E-mailed submissions are accepted and are the preferred form of submission. Receipt will be verified by the date/time stamp on fax or e-mail. | - | Combined Synopsis | 11/16/2026 |
This procurement is a Total Small Business Set Aside for Brand Name: High Purity Northwest (2) Thermo-Vac Vacuum Dehydrator & Filtration Systems and (2) Laser Particle Counter with ISO Codes & Water Content Displays. Fully compliant quotes must be submitted in PDF format on company letterhead to terra.s.roberts.civ@us.navy.mil on or before the established closing date and time of this combined synopsis/solicitation; please note that late, partial, or incomplete submissions will not be accepted by the Government. Offerors must include their CAGE code, delivery lead times, and detailed technical specifications within their package. Payment terms are established as NET 30 days, and invoiced through the Wide Area Workflow (WAWF) system. If shipping charges are not included in the base product pricing, they must be represented as a distinct, individual line item on the quote. Please thoroughly review all attachments for precise product descriptions and quantities, as the final contract award will be determined on a Best Value to the Government basis, evaluating price, delivery schedule, quality, and past performance | - | Combined Synopsis | 11/12/2026 |
NRL NOTICE OF INTENT TO AWARD A SOLE SOURCE TEMPLATE This Notice of Intent is not a request for competitive proposals. This is not a solicitation or request for offers. No solicitation package is available and email requests will not be honored. Only one responsible source and no other supplies or services will satisfy agency requirements. The Naval Research Laboratory (NRL) intends to award a sole source purchase order to TOPTICA, Photonics Inc of Pittsford, New York to furnish: X See Attached Schedule of Supplies/Services OR See Chart Below Line Item 01 Description: TOPTICA USA designed rugged and low-SWaP tapered amplifier module at 780 nm Qty: 1 EA The North American Industry Classification System Code (NAICS) for this requirement is 334516 with the size standard of 1000 (PSC) procurement is J066. . . The Federal Supply Code (FSC) / Product Service Code This purchase will be made utilizing Simplified Acquisition Procedures in accordance with: Federal Acquisition Regulation (FAR) Part 13.106-1(b) for purchases not exceeding the simplified acquisition threshold of $250,000. Interested parties may identify their interests and capability to respond to this requirement in accordance with the posted opening and closing dates. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. A determination by the Government not to compete this proposed purchase order based upon response to this notice is solely within the discretion of the Government. No reimbursement for any cost connected with providing capability information will be provided. Please reference this Notice of Intent number, N0017327Q1301397565 on your correspondence and in the "Subject" line of your email. | - | Special Notice | 11/09/2026 |
Competitive quotes are being requested under Request for Quote (RFQ) Number N66001-26-Q-6241. The North American Industry Classification System (NAICS) code applicable to this acquisition is 333248, All Other Industrial Machinery Manufacturing and the small business size standard is 750 employees. This procurement is a Total Small Business Set-Aside. Only quotes submitted by Small Business Concerns will be accepted by the Government. Any quote that is submitted by a non-Small Business Concern will not be considered for award. The Government is seeking to acquire 22 IDEX 3D printers and associated accessories. To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed in the DESCRIPTION OF REQUIREMENTS section of the attached N66001-26-Q-6241 CSS document. The Government will not consider quotes or offers for partial items or quantities. Please see all attachments for further descriptions, details, and instructions. Questions Due Date and Submission Requirements: All questions must be received before 23 July 2026 at 12:00PM, Pacific Time. Questions must be submitted via email to the Government RFQ Point of Contact listed below. Include RFQ# N66001-26-Q-6241 on all inquiries. Questions may be addressed at the discretion of the Government. RFQ Due Date and Submission Requirements: This RFQ closes on 27 July 2026 at 2:00PM, Pacific Time. Quotes must be submitted via the Solicitation Module within the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil, under Notice ID N66001-26-Q-6241. E-mail quotes or offers will not be accepted and late quotes will not be accepted. PIEE Assistance: For PIEE technical issues, see the Vendor Customer Support resources at https://cac.piee.eb.mil/xhtml/auth/web/homepage/vendorCustomerSupport.xhtml. Government RFQ Point of Contact: The point of contact for this solicitation is Trinity Anglo at trinity.l.anglo.civ@us.navy.mil. Reference RFQ# N66001-26-Q-6241 on all email exchanges regarding this acquisition. | - | Combined Synopsis | 07/27/2026 |
Additional Details
Solicitation Number
N0017324QDH01
Archive Date
Oct 5, 2024
Office Address
WASHINGTON, DC, 20375-5328