F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM EST
- Posted
- November 3, 2026
- Notice type
- Sources Sought
- NAICS
- 334515: Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVSEA.NAVSEA WARFARE CENTER.NSWC INDIAN HEAD DIVISION
- Last updated
- Nov 3, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N00174-26-RFPREQ-W72-0007
- Notice ID
- 32c0878f808e460396b0a025e5902528
Description
This announcement should not be construed as a commitment by the U.S. Government. The U.S. Navy does not intend to award a contract based on this Request for Information/Sources Sought Notice. THIS IS NOT A Request for a Proposal AND DOES NOT OBLIGATE THE U.S. GOVERNMENT TO ISSUE an RFP. This RFI is for U.S. Government planning purposes only and constitutes requests for exchange of information pursuant to FAR Part 10.
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Contracts Department, Code 02 is conducting Market Research on an F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System. NSWC IHD is conducting a market survey to identify sources/vendors capable of supplying a system satisfying the following requirements:
- The system shall consist of an integrated test and control console, computer workstation, and junction box capable of controlling and monitoring performance data for F/A-18 A/A49A-1, A/A49A-2 and F-35 GPU-8/A, GPU-9/A gun pods.
- The system shall interface with and control the 20mm M61A1/A2 gun in the F/A-18 A/A49A-1 and A/A49A-2 gun system configurations and must include an integrated lane-capable Gun Control Unit (GCU).
- The system shall interface directly with the standard GPU-8/A and GPU-9/A Gun Systems Control Unit (GSCU) for controlling 25mm gun pods.
- Manual swapping of control and telemetry cables between gun platforms is acceptable provided all connectors and bulkheads are military or industrial grade and rated for high-cycle insertion and removal.
- The system shall replicate the baseline gun acceptance output, logging, and monitoring instrumentation utilized at production gun test facilities. The data points monitored shall include:
- Gun rate
- Trigger signal
- Arm signal
- Safing signal
- Steady state rate
- Acceleration and deceleration time
- Hydraulic flow rate
- Hydraulic pressure for supply and return
- Hydraulic fluid temperature
- Hydraulic fluid temperature
- Hydraulic fluid pressure
- Rounds fired
- Rounds cleared
- The RDAS setup shall operate strictly using existing test range utility power supplies:
- 115 VAC, 1-Phase, 60 Hz
- 300 VDC, 2.0 A
- 28 VDC, 30.0 A
- The hardware must incorporate a hardwired, fail-safe "dead-man switch" accessible to the Range Safety Officer (RSO). Releasing the switch at any point during active operations shall immediately disarm the weapon drive and inhibit fire control commands.
- The Contractor shall provide a complete Operational and Maintenance Manual covering the custom console, software configuration, cabling schematics, calibration procedures, safety interlocks, and troubleshooting.
- System Drawings & Calibration Records: Applicable factory calibration data, wiring schematics, and system interconnection drawings shall accompany final hardware delivery.
- The Contractor shall provide hands-on operational training, integration, and dry-fire range demonstration at the Picatinny Arsenal test range following installation.
- The Contractor shall live fire test the system with an F/A-18 A/A49A-1 or A/A49A-2 gun system and an F-35 GPU-8/A or GPU-9/A gun pod to verify proper function prior to delivery to the government. Government test facilities are not available for live fire testing as this capability has not been established yet.
Request your company provide responses to the following questionnaire:
- Does your company have the capability to meet all of the requirements mentioned above? If yes, describe your company's history and experience with supplying this item (or similar gun control systems).
- Can your company provide a Rough Order of Magnitude (ROM) price estimate?
- What is your company’s plan for live fire verification testing with applicable gun systems?
- Does your planned testing facility hold the necessary ATF licensing, Net Explosive Weight (NEW) storage capacity, and compliance with DoD 4145.26-M to perform the live fire verification testing?
All interested sources shall provide the organization name, address, point of contact, phone number, e-mail address, business size, Unique Entity ID, and CAGE Code. In addition, all interested sources shall provide a summary of their company’s capabilities and delivery timeframe and schedule. All responding sources must email their response submissions no later than 16:00 Eastern Time on 13 November 2026 to the Point of Contacts (POCs) listed below. Submissions must be in PDF format and shall not exceed fifteen (15) pages in total.
1) NSWC IHD
Attn: David Harvey
Picatinny Arsenal, NJ 07806
david.r.harvey16.civ@us.navy.mil
2) NSWC IHD
Attn: Sean McAvoy
Picatinny Arsenal, NJ 07806-5000
sean.p.mcavoy.civ@us.navy.mil
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
- 1Version 1Sources SoughtCurrent
F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Items: Seven (7) separate items in support of the IHADSS system (see PDF attachment) NSNs: Seven (7) separate NSNs in support of the IHADSS system (see PDF attachment) P/Ns: Seven (7) separate part numbers in support of the IHADSS system (see PDF attachment) Qty: Estimated Maximum of 1907 each over a 5-Year ordering period End Item: IHADSS system Note: The Government does not possess the technical data packages (TDPs), detailed drawings or performance specifications for these items. This is not a developmental effort. The purpose of this sources sought notice is to canvass the industry for any possible other sources. *** If interested, please respond to this sources sought notice no later than the close of business, 21 Sep 2026. | 58% | Market Research | 09/21/2025 |
NSN: 1240-01-716-4166 COMMODITY NAME: RANGE FINDER,LASER Mfr Part Number: 13083232 | 55% | Awarded | Open |
The Naval Sea Systems Command (NAVSEA) intends to utilize other than full and open competition to award a contract to Lockheed Martin Rotary and Mission Systems (LM RMS), located in Moorestown, New Jersey for the Fiscal Year 2023-2027 (FY23-27) AEGIS Weapon System (AWS) AN/SPY Radar Systems production program for AEGIS Modernization (AMOD), Ship Construction, Navy (SCN), Foreign Military Sales (FMS), and AEGIS Land Based Test Sites (LBTS). The requirements include the production and testing of the AEGIS Multi-Mission Signal Processor – Capability Restoration (MMSP-CR) Equipment system, AEGIS Linear Processor System (ALPS), MK 78 Warhead Data Receiver Cabinets (WDRC) Equipment, AEGIS Combat System Support Equipment (ACSSE), AEGIS spares, engineering services, incidental materials, Other Direct Costs (ODCs), and coordinating and conducting testing at the Production Test Facility (PTF) for backfit, new construction, and FMS ships. LM RMS is the prime contractor for WDRC, MMSP, and ALPS development efforts, as well as the prime contractor for AWS Production. Accordingly, the FY 23-27 AEGIS Production follow-on requirements described in this notice will be procured from LM RMS on a sole source basis under the authority of 10 U.S.C. 3204(a)(1). LM RMS is the only known source possessing the requisite knowledge and ability to meet the Navy's technical requirements and challenging AMOD, SCN, and FMS shipyard schedules for implementing the FY 23-27 AEGIS Production follow-on requirements. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of Federal Acquisition Regulation (FAR) 6.302. Interested persons may identify their interest and capability to respond to the requirement. This notice of intent is not a request for competitive proposals. However, all expressions of interest received within fifteen (15) days after date of publication of this synopsis, will be considered by the Government. Any submissions will not be reimbursed by the Government -- the entire cost of any submission will be at the sole expense of the source submitting the information. A determination by the Government not to compete this proposed contract based upon responses to this notice, is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. This synopsis is for informational purposes only. Companies interested in subcontracting opportunities must contact LM RMS directly. | 54% | Pre-Solicitation | 04/29/2022 |
This is a repair requirement for the item(s) identified in this solicitation. Repair Turnaround Time (RTAT) definition: The contractual delivery requirement Is measured from asset Return to the date of asset acceptance under the terms of the contract. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in this contract. Required RTAT: ## ____ days after receipt of asset. Throughput Constraint: Contractor must provide a throughput Constraint for each NSN(s). Total assets to be repaired monthly after initial delivery commences X/month (contractor fill in #). A throughput of ##____ per month reflects no throughput constraint. Induction Expiration Date: 365 days after contract award date. Any asset received after this date in days is not authorized for repair without bi-lateral agreement between the Contractor and NAVSUP WSS Contracting Officer. Reconciliation: A reconciliation modification will be issued after final Inspection and acceptance of all assets inducted under this contract. The parties have agreed to a price (shown on the schedule page) for each unit at the negotiated RTAT. Such prices are based on the Contractor meeting the RTAT requirements described within the schedule page. If the Contractor does not meet the applicable RTAT requirement, consideration will be assessed and subject to negotiation. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. Early and incremental deliveries accepted. | 53% | Solicitation | 12/17/2026 |
This notice is a combined Request for Information and Synopsis. The primary purposes of this notice are as follows: Conduct market research to determine if other sources capable of satisfying the agency’s requirements exist and if commercial items or non-developmental items are available that meet the agency’s requirements. Improve small business access to acquisition information. Enhance competition by identifying contracting and subcontracting opportunities. This announcement is not a Request for Proposal or an Invitation for Bid, nor is it to be construed as a commitment by the Government. The Government does not intend to contract based on this request or otherwise pay for any information solicited herein. Interested parties should contact scottina.malia@us.af.mil. Detailed Information Noun: Head Up Display NSN: 1270-01-514-2683 P/N: 46431110-30 Estimated Quantity: 10 each Destination: DPL002 / DA2QBF Estimated Delivery Schedule: 12/31/27 Set-aside: It is NOT expected that this requirement will be set-aside for small businesses Statements Based upon market research, the Government is not planning on using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. All responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. This part required engineering source approval by the design control activity to maintain the quality of the part. Existing unique design capability, engineering skills and manufacturing knowledge by the qualified source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity’s procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. One or more of the items under this acquisition is subject to Free Trade Agreements. | 53% | Market Research | 11/17/2026 |
Additional Details
Solicitation Number
N00174-26-RFPREQ-W72-0007
Archive Date
Nov 28, 2026
Office Address
INDIAN HEAD, MD, 20640-1533