Notice ID: 94bab0b2e08040599603de656a597a0fPresolicitation
Pan Cartridges
Archived on September 23, 2020. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 7:00 AM UTC−04:00
- Posted
- September 4, 2020
- Notice type
- Presolicitation
- NAICS
- 336992: Military Armored Vehicle, Tank, and Tank Component Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NSWC INDIAN HEAD DIVISION
- Place of performance
- Indian Head, MD, 20640
- Last updated
- Apr 29, 2026
Identifiers
- Solicitation number
- N0017420R0247
- Notice ID
- 94bab0b2e08040599603de656a597a0f
Description
NOTICE OF INTENT TO SOLE SOURCE: Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD), intends to award a firm fixed price sole source procurement with L-Tech Ammunition 90 GATS Way Eubank KY 42567 to provide: CLIN 0001--CTG, 12 Gauge, EOD 600 each CLIN 0002--Slug ,CTG, 12 Gauge, EOD 600 each CLIN 0003--Steel Slug,CTG, P.A.N. Disrupter 600 each CLIN 0004--Slug,CTG, 12 Gauge EOD Aluminum 600 each CLIN 0005--Cartridge, 12 Gauge, EOD, BK90 Blank 600 each CLIN 0006-- Cartridge, 12 Gauge,Blank-1450 600 each CLIN 0007-- Cartridge, 12 Gauge,Blank-500 300 each CLIN 0008 Shipping The associated North American Industry Classification System (NAICS) code is 336992, which has an annual size standard of 1,500 employees. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM/. The circumstances permitting Other Than Full and Open Competition is Federal Acquisition Regulation (FAR) 6.302-1, "Only one responsible source and no other supplies or services will satisfy Agency requirements." The intent of this synopsis is to determine if any sources exist, and therefore, no Request for Quote (RFQ) is available. This notice of intent is not a request for competitive quotes; however, all information received by 7 AM September 8, 2020 will be considered by the Government. A determination by the Government not to compete this proposed contract action based upon the responses received from this notice is solely within the discretion of the Government.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0017420R0247- Pre-Solicitation
Formal solicitation typically follows within 30–60 days. (estimate)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Naval Air Systems Command (NAVAIR) intends to negotiate and award a sole source hybrid (Firm Fixed Price (FFP), Cost Plus Fixed Fee (CPFF)/Cost Indefinite Delivery/Indefinite Quantity (IDIQ) Contract with Lockheed Martin Corporation 1801 State Rt 17 C, Owego, NY 13827 for the sustaining engineering, program management, logistics, flight test support, training, repairs, reliability improvements, configuration and obsolescence management, system and subsystem software development, and deployed field services for the H-53, H-60 and Presidential helicopter fleets. Lockheed Martin is the sole designer, developer and manufacturer of the above-mentioned helicopter fleets. Lockheed Martin is the only known responsible source with the requisite knowledge, technical data, capability, experience, special tooling, and test facilities necessary to fulfill the Government's requirements within the required timeframes. This requirement will be procured in accordance with the statutory authority permitting other than full and open competition under 10 U.S.C. 3204(a)(1), as implemented by the Federal Acquisition Regulation (FAR) 6.103-1, in that Lockheed Martin is the only responsible source and no other supplies or services will satisfy agency requirements. For subcontracting opportunities please contact Michael Dokla (Lockheed Martin Supply Chain Team), at 203-242-6655 or mike.dokla@lmco.com. | - | Pre-Solicitation | 11/25/2026 |
The Naval Air Systems Command (NAVAIR), on behalf of the F/A-18E/F and EA-18G Program Office (PMA-265), is conducting market research to determine the industrial base’s existing capability and facility capacity to provide supplemental or secondary Service Life Modification (SLM) turnkey capacity for F/A-18E/F Super Hornet and EA-18G Growler aircraft starting in FY29. The Government seeks mature, currently operational—facilities, personnel, processes, tooling, and infrastructure capable of supporting SLM workload. The Government is not seeking conceptual or developmental solutions that would require significant new construction, extensive infrastructure development, or multi-year implementation before becoming operational. The Government currently executes these requirements through a hybrid framework utilizing the Original Equipment Manufacturer (OEM) (The Boeing Company) and a Naval Aviation Enterprise organic depot (Fleet Readiness Center Southwest) under a public private partnership with the OEM. To support long-term strike fighter inventory requirements, the Government is evaluating the availability of additional commercial or second-source depot modification repair overhaul (MRO) capacity. Information submitted in response to this notice will assist the Government in determining its long-term acquisition strategy through 2038, including whether to establish an additional qualified source to supplement the current capacity or maintain the current hybrid framework mentioned above under the authority of FAR 6.103-3(b)(1) (Defense Pricing, Contracting, and Acquisition Policy (DPCAP) Class Deviation (CD) 2026-O0017) / 10 U.S.C. 3204(a)(3)(A) (Industrial Mobilization). PMA-265 anticipates a maximum SLM induction profile of up to 47 aircraft per year across the industrial base. Actual aircraft allocation among available sources may vary based on Fleet requirements, aircraft availability, demonstrated performance, schedule, and available capacity. 1. Scope of Interest The Government is seeking information on industry capability to perform the SLM workload to supplement current capacity, including but not limited to: Aircraft induction, preservation, inspection, and documentation; F/A-18E/F and EA-18G SLM Specification Modification work; Installation of applicable Structural Technical Directives (TDs) and Advanced Capability Modifications such as Block III upgrade kits; Procurement and management of all required material, including long-lead material, using corporate approaches that support anticipated year-of-execution requirements and ensure material is available for installation when required; Inspection-based repairs and structural modifications; Manufacturing or sourcing of repair parts and materials, as required; Aircraft systems troubleshooting and functional verification; Aircraft records and database updates; and Support for Functional Check Flights and coordination with Government representatives. The Government recognizes that individual respondents may be capable of supporting only a subset of this work or a limited annual quantity. Responses identifying supplemental capability, secondary capability, or potential teaming arrangements are encouraged. 2. Information Requested Interested firms are requested to provide the following information: I. Company Information Company name, address, point of contact, telephone number, and email address. Business size and applicable socioeconomic status, if any. Relevant experience performing MRO / depot-level maintenance, advanced avionic systems modification, modernization, structural repair, or sustainment work on tactical aircraft. II. Facility Information Location(s) of existing facilities proposed for this effort. Number, type, and dimensions of available aircraft bays or work positions, including usable floor area, hangar-door dimensions, overhead clearance, and any facility limitations. For planning purposes, the aircraft footprint is 45 feet wide by 61 feet long Availability of a suitable runway and airfield support for F/A-18 and EA-18G series aircraft. Current facility utilization and the earliest date capacity could be made available. Access to required security, quality assurance, tooling, material handling, and aircraft-support infrastructure. Current, or ability to obtain, Defense Security Services (DSS) facility clearance of Secret. Consistent with Executive Order 14372, Prioritizing the Warfighter in Defense Contracting, and the USW(A&S) memorandum, Prioritizing the Warfighter and Negotiation of Contractor Facilitation Costs (dated 4 May 2026), respondents shall identify whether they anticipate using their own capital to fund stand-up costs necessary to perform the proposed work and describe any Government support, reimbursement, or other enablers required to establish the proposed capability. III. Capacity and Throughput Maximum number of F/A-18E/F and/or EA-18G aircraft the company could induct and complete annually. Expected induction ramp-up profile by year. Estimated average turnaround time from induction through return to the Fleet. Constraints that may limit throughput, including workforce, facilities, supply chain, engineering support, tooling, or Government-furnished material. Ability to adjust capacity in response to changing Fleet requirements or surge demand. Availability of funds to purchase all material to protect quantity throughput and maintain a stock of consumables to perform repair incidents throughout the modification (such as addressing corrosion), parts managements to include obsolescence and manufacturing parts capability. IV. Technical Capability Experience with F/A-18-series aircraft or comparable military tactical aircraft. Capability to perform structural inspections, repairs, modifications, TD incorporation, Non-destructive Inspections (NDI), wiring/electrical work, and systems troubleshooting. Capability to manufacture repair parts or develop repair procedures when required, using Government- or original equipment manufacturer-provided engineering direction. Ability to manage material procurement, kit installation, consumables, and repair-incident-to-modification requirements. Experience coordinating with the Defense Contract Management Agency (DCMA) or similar Government quality-assurance organizations. Ability to recruit, retain, and sustain sufficient qualified personnel to support anticipated SLM workload, including structural engineering personnel eligible for appointment as Naval Air Systems Command Designated Engineering Representatives (NAVDERs) to support the engineering analysis and disposition of aircraft-specific structural findings within the scope of authority delegated by NAVAIR. Respondents should describe their current and projected staffing capacity; recruitment, retention, and succession approaches; and ability to surge personnel as workload requires. V. Cybersecurity Ability to comply with applicable Department of the Navy, NAVAIR, and Department of War cybersecurity requirements for the protection, handling, storage, transmission, and access of Government information and data in performance of the proposed work. VI. Additional Information Identify any Government support, data, tooling, facilities, training, technical assistance, or other enablers that would be needed to establish or expand SLM capability. Provide any recommended acquisition, phasing, or transition approach that would help establish supplemental capacity while minimizing risk to Fleet readiness. 3. Response Instructions Responses should be limited to ten (10) pages and submitted electronically to jacob.r.heintze.civ@us.navy.mil no later than 3 December 2026. This RFI is issued for market research and planning purposes only. It is not a solicitation, request for proposal, or commitment by the Government to award a contract or reimburse any costs associated with responding. Information received may be used to assess available industry capability, capacity, potential small-business participation, and possible acquisition approaches to provide supplemental or secondary capacity for SLM work on F/A-18E/F Super Hornet and EA-18G Growler aircraft. | - | Market Research | 12/03/2026 |
The Naval Air Systems Command (NAVAIR) at Patuxent River, MD intends to award a Firm Fixed Price (FFP) contract modification under contract N0001925C0009 to Lockheed Martin, Orlando, FL, on a sole source basis. This contract will provide F/A-18E/F Infrared Search and Track (IRST) Block II System Surrogate Aft Electronics Assembly in support of Navy Operational Test Program Sets (OTPS). As the sole designer, developer, and manufacturer of the IRST IRR, IMU, and Processor, Lockheed Martin is the only source with the requisite knowledge, experience, and technical data required to successfully manufacture the system without causing unacceptable delays in meeting the Navy’s operational requirements. Additionally, an award to any other source would result in substantial duplication of cost to the Government that is not expected to be recovered through competition. The authority permitting other than full and open competition is Title 10, U.S. Code 3204(a)(1), as implemented by FAR 6.103-1, "Only One Responsible Source," and no other supplies or services will satisfy agency requirements. This synopsis is for informational purposes only and is not a request for competitive proposals. Interested parties may identify their interest and capability by responding to this synopsis. The Government will consider all capability information received prior to the closing date. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete based upon responses to this notice is solely within the discretion of the Government. There is no commitment by the Government to issue any solicitation, make an award, or be responsible for any monies expended by any interested party before award of a contract for the efforts detailed above. Information provided herein in no way binds the Government to solicit for or award a contract. If you have any questions regarding this synopsis, please contact Shannon Buckalew at Shannon.r.buckalew.civ@us.navy.mil or Jessica Myers at jessica.v.myers.civ@us.navy.mil. For small business or subcontracting opportunities, contact Lockheed Martin at (972) 603-2950. | - | Pre-Solicitation | 11/24/2026 |
The Naval Air Systems Command (NAVAIR) at Patuxent River, MD intends to award a Firm Fixed Price (FFP) contract modification under contract N0001925C0009 to Lockheed Martin, Orlando, FL, on a sole source basis. This contract will provide a life-of-type buy of 543 units of the original Resolver-to-Digital Converter (RDC) Hybrid Integrated Circuits (P/N 717405153-001 / SD-14623FS-612) supporting the IRST Block II Infrared Receiver (IRR) Weapons Replacement Assembly (WRA). As the sole designer, developer, and manufacturer of the IRST IRR, IMU, and Processor, Lockheed Martin is the only source with the requisite knowledge, experience, and technical data required to successfully manufacture the system without causing unacceptable delays in meeting the Navy’s operational requirements. Additionally, an award to any other source would result in substantial duplication of cost to the Government that is not expected to be recovered through competition. The authority permitting other than full and open competition is Title 10, U.S. Code 3204(a)(1), as implemented by FAR 6.103-1, "Only One Responsible Source," and no other supplies or services will satisfy agency requirements. This synopsis is for informational purposes only and is not a request for competitive proposals. Interested parties may identify their interest and capability by responding to this synopsis. The Government will consider all capability information received prior to the closing date. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete based upon responses to this notice is solely within the discretion of the Government. There is no commitment by the Government to issue any solicitation, make an award, or be responsible for any monies expended by any interested party before award of a contract for the efforts detailed above. Information provided herein in no way binds the Government to solicit for or award a contract. If you have any questions regarding this synopsis, please contact Shannon Buckalew at Shannon.r.buckalew.civ@us.navy.mil or Jessica Myers at jessica.v.myers.civ@us.navy.mil. For small business or subcontracting opportunities, contact Lockheed Martin at (972) 603-2950. | - | Pre-Solicitation | 11/24/2026 |
The Naval Air Systems Command (NAVAIR) at Patuxent River, MD intends to award a Firm Fixed Price (FFP) contract modification under contract N0001925C0009 to Lockheed Martin, Orlando, FL, on a sole source basis. This contract will provide a life-of-type buy of 950 Extreme Engineering Solutions (X-ES) re-balled Intel Xeon D-1559 (P/N 41040282-LMC-7672-67) to for use on the X-ES XPedite7672-67 3U VPX Commercial Off The Shelf (COTS) card supporting the IRST Block II Processor Weapons Replacement Assembly (WRA). As the sole designer, developer, and manufacturer of the IRST IRR, IMU, and Processor, Lockheed Martin is the only source with the requisite knowledge, experience, and technical data required to successfully manufacture the system without causing unacceptable delays in meeting the Navy’s operational requirements. Additionally, an award to any other source would result in substantial duplication of cost to the Government that is not expected to be recovered through competition. The authority permitting other than full and open competition is Title 10, U.S. Code 3204(a)(1), as implemented by FAR 6.103-1, "Only One Responsible Source," and no other supplies or services will satisfy agency requirements. This synopsis is for informational purposes only and is not a request for competitive proposals. Interested parties may identify their interest and capability by responding to this synopsis. The Government will consider all capability information received prior to the closing date. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete based upon responses to this notice is solely within the discretion of the Government. There is no commitment by the Government to issue any solicitation, make an award, or be responsible for any monies expended by any interested party before award of a contract for the efforts detailed above. Information provided herein in no way binds the Government to solicit for or award a contract. If you have any questions regarding this synopsis, please contact Shannon Buckalew at Shannon.r.buckalew.civ@us.navy.mil or Jessica Myers at jessica.v.myers.civ@us.navy.mil. For small business or subcontracting opportunities, contact Lockheed Martin at (972) 603-2950. | - | Pre-Solicitation | 11/24/2026 |
Additional Details
Solicitation Number
N0017420R0247
Archive Date
Sep 23, 2020
Office Address
INDIAN HEAD, MD, 20640-1533