Notice ID: 44a67c900d274ada86554c875f7f4dceSolicitation
MK152 Cushion Kits
Archived on April 13, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 3:00 PM UTC−04:00
- Posted
- March 21, 2024
- Notice type
- Solicitation
- NAICS
- 326150: Urethane and Other Foam Product (except Polystyrene) Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NSWC INDIAN HEAD DIVISION
- Place of performance
- Indian Head, MD, 20640
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N0017424R0022
- Notice ID
- 44a67c900d274ada86554c875f7f4dce
Description
Amendment 0003 is posted as of 3/21/2024. Please see attachments. Amendment 0002 is posted as of 3/11/2024. Please see attachments. Amendment 0001 is posted as of 2/28/2024. Please see attachments. Description: The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), intends to award a firm-fixed price (FFP) contract on a competitive basis to the offeror with the lowest price technically acceptable for fabrication of Cushion Foam for use in simultaneous shipping of 4 pieces of ordnance, loaded at Naval Surface Warfare Center Indian Head Division (NSWC IHD). The contractor will fabricate cusion foam used for assembly in MK 152 Foam Cushions at Naval Surface Warfare Center Indian Head Division (NSWC IHD). The associated North American Industry Classification System (NAICS) code is 326150. The associated Product Service Code (PSC) is 8135. The proposed contract action is for supplies, for which the Government intends to solicit and negotiate with full and open competition under the authority of Federal Acquisition Regulation (FAR) 6.401(a)(2), "The award will be made on the basis of price and other price-related factors." The solicitation number must be in all notice responses. Direct any questions to Diane Hicks at diane.d.hicks.civ@us.navy.mil.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0017424R0022- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- 5×
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amendemnt 0001: The purpose of this amendment is to update the time zone in the RFI attachment. The Naval Air Warfare Center (NAWC) (PMA-262/MQ-4C Program Office) is soliciting information and comments from industry on its ability to manufacture the Engine Inlet Bellmouth Housing (Part Number: 4106AS0275) in accordance with the Navy’s Technical Data Package to include 3D CAD DATA FILE 3673310M01110-11 (available upon request from the contract specialist listed in this RFI). Should this requirement be procured and awarded, the Navy will also provide the existing part mold to the awardee as Government Furnished Equipment during the Period of Performance. Please see the attached RFI document for response questions and instructions. | - | Market Research | 11/01/2026 |
AMENDING TO ADD MORE DETAILED DESCRIPTION AND DRAWINGS FOR ANTI STATIC FOAM | - | Combined Synopsis | 06/03/2026 |
AMMENDING TO UPDATE RESPONSE DATE DUE TO SYSTEM ERROR (Specifications for the Foam Manufacturing need to be met per the drawings provided. Anti-Static closed cell foam or standard closed cell foam IAW with Drawing 2645188 this foam has an anti-static spray that needs sprayed on before delivery. Foam may be laminated together IAW 8410905 if it can?t be produced in one single foam piece. These are options are only available if the drawing associated with the P/N are stated in the Drawing) | - | Combined Synopsis | 01/21/2026 |
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes only solicitation; quotes are being requested and a separate written solicitation will not be issued. Solicitation number 2126406Y152141455 used as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016. It is anticipated that a competitive purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. Quotes will be evaluated by who can provide all the requested items, delivery time frame and by price. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: PLEASE QUOTE WITH DELIVERY TO ZIP CODE 21226 - NO SUBSTITUTIONS. Vendor shall provide: ALL ITEMS LISTED IN THE ATTACHED PARTS LIST AND NO SUBSTITUIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG YARD TECHNICAL EXPERTS. ITEM 1: NSN: 4510 01-544-1027 PURCHASE DESCRIPTION: TOILET, MARINE, VACUUM, COMPLETE ASSEMBLY, WHITE CHINA, DECK MOUNTED TYPE, MANUAL FLUSH AND FULLY AUTOMATIC, CONSUMPTION SHALL BE 0.35 GALLONS PER FLUSH, INCLUDING: VACUUM BREAKER TOILET SEAT. QTY: 28 EA UNIT PRICE: ______________ TOTAL: ___________________ Delivery Date: ______________ * All Deliveries are Required by*12/22/26* ** Total cost shall have delivery, and any Freight charges included. **** SHIPPING: FOB DESTINATION REQUIRED. ** Quote Total: UEIN: NAICS code: SHIP TO: USCG SURFACE FORCES LOGISTICS CENTER 2401 HAWKINS POINT ROAD RECEIVING ROOM- BUILDING 88 BALTIMORE, MD 21226 Preparation For Delivery All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment. All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided. Material shall be packed for shipment using Military Packaging, for examples in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations. Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse. All material shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped. All Deliveries are to be made Monday through Friday between the hours of 7:00AM to 1:00PM. Please make sure that any changes in Delivery Timeframes or tracking information get sent to D05-SMB-SFLC-CPD-CP3-SAP-ADMIN@uscg.mil. Invoicing In IPP It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov. | - | Combined Synopsis | 11/08/2026 |
The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for a centrifugally cast fiberglass-reinforced polymer mortar (CCFRPM) pipe that has the equal performance and listing/approval requirements as the HOBAS pipe (CCFRPM pipe), manufactured by HOBAS Pipe USA, Inc., 1413 E. Richey Road, Houston, Texas 77073-3508. The alternate product/service must meet the following requirements and specifications: Centrifugally cast fiberglass-reinforced polymer (CCFRPM) pipe, manufactured and tested in accordance with ASTM D3262. Pipe sizes shall be 24-inch (DN 600, 25.8-inch OD) and 42-inch (DN 1050, 45.9-inch OD) nominal diameters. Manufactured by the centrifugal casting process to result in a dense, uniform, non-porous, corrosion-resistant, consistent composite structure. Interior surface of the pipe exposed to untreated sewer flow must provide crack and abrasion resistance. Exterior surface of the pipe must be comprised of a sand and resin layer that provides ultraviolet (UV) protection to the pipe exterior. Pipes must be Type 1, Liner 2, Grade 3 per ASTM D3262. Coupling joints must meet the requirements of ASTM D4161. Minimum pipe normal stiffness (SN) when tested in accordance with ASTM D2412 must be 46 pound per square inch (PSI). Resin System: Manufacturer must use only polyester resin systems with proven history of performance in this application. Historical data must be acquired from a composite material or similar construction and composition as the proposed product. Glass Reinforcement: The reinforcing glass fibers used to manufacture the components must be of the highest quality commercial grade E-glass filaments with binder and sizing compatible with impregnating resins. Silica Sand: Sand must be minimum 98% silica with a maximum moisture content of 0.2%. Additives: Resin additives, such as curing agents, pigments, dyes, fillers, and thixotropic agents, etc., when used, must not detrimentally affect the performance of the product. Elastomeric Gaskets: Gaskets must meet ASTM F477 and be suitable for the intended service. This notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes, or invitation of bids or award a contract. Interested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system. Technical response shall be typed, at least 11 point Times New Roman or larger, single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format. Also, provide company information and point of contract (name, title, email, phone, mailing address). The Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement. Any information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit your company brochure. Interested parties shall submit information and specifications to Ms. Isabella Chong-Navarre, Contract Specialist via email at isabella.a.chong-navarre.civ@us.navy.mil and Ms. Jessica Shimoda, Contract Specialist via email at Jessica.a.shimoda.civ@us.navy.mil. Interested parties responding to this announcement by 17, November 2026 at 10:00 A.M. Hawaii Standard Time will be considered. | - | Market Research | 11/17/2026 |
Additional Details
Solicitation Number
N0017424R0022
Archive Date
Apr 13, 2024
Office Address
INDIAN HEAD, MD, 20640-1533