Notice ID: b705c92c9310411cb634c350c8d93236Combined Synopsis/Solicitation
Scale Calibration Services
Archived on April 20, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM UTC−04:00
- Posted
- March 27, 2024
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 541380: Testing Laboratories and Services
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NSWC INDIAN HEAD DIVISION
- Place of performance
- Picatinny Arsenal
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- N0017424R0060
- Notice ID
- b705c92c9310411cb634c350c8d93236
Description
24R0060 This is a combined synopsis/solicitation for commercial items/services prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: Scale Calibration Services. This solicitation will be small business set aside. This announcement constitutes the only solicitation and a written solicitation will not be issued. Quotes are being requested under Request for Quotation (RFQ) no. N0017424R0060. The NAICS code is 541380. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2020?01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20190531. The Basis for Award will be Lowest Price Technically Acceptable from this solicitation to the responsible vendor whose quote, conforming to the solicitation that will be most advantageous to the Government, given the factors considered. The Government intends to evaluate all timely quotes received from eligible vendors. The Government intends to evaluate quotations and award a contract without discussions. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. Evaluation Factors (in order of importance) Technical – Quotes must reflect the required specifications included in the RFQ? IAW 1.0 of the SOW. Price – Quotes must include all applicable costs. Quote packages are due by 05 April 2024 10:00 AM EST. Late quotes will not be considered. Quote packages shall INCLUDE THE COMPLETED/FILLED IN RFQ and needs to be emailed to Jodi.l.fields.civ@us.navy.mil and contain a cover sheet that provides the following information: Official Company Name; Point of contact including name and phone number; and DUNS number and Cage Code. The Points of Contact for this acquisition is 1. Jodi.l.fields.civ@us.navy.mil
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Jodi L Fields
Documents
No documents available.
Lifecycle
Solicitation:
N0017424R0060- Combined Synopsis
- Combined SynopsisCurrentMar 27, 2024
Scale Calibration Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Engineering and technical services in support of the Support Equipment Department at the Naval Air Warfare Center Aircraft Division Lakehurst, NJ. | - | Solicitation | 12/03/2026 |
********************************************************************** UPDATE 10/26/2026 Item 1: Posted Questions and Answers ********************************************************************** Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF) is a US Navy regional industrial center that maintains, overhauls and repairs various vessels of the US Navy. Its industrial operations provide the US naval forces with a wide range of services and resources located on the island of Oahu, Hawaii, with direct and indirect support to submarines, surface vessels and shore based activities in the Pacific. PHNSY & IMF seeks services to calibrate, provide preventative maintenance and as-needed remedial repairs of three (3) Government-owned Roberts Testing Proof Test Machines to ensure their accuracy, reliability, and safe operation. The Contractor shall provide all necessary labor, materials, and expertise to perform comprehensive calibration, preventative maintenance and as-needed remedial repair services on the Government-owned equipment specified in the Performance Work Statement (PWS) The tentative period of performance for this service: Base Period*: From 16 November 2026 to 15 November 2027 Option Periods*: Option Period 1: 16 November 2027 to 15 November 2028 Option Period 2: 16 November 2028 to 15 November 2029 Option Period 3: 16 November 2029 to 15 November 2030 Option Period 4: 16 November 2030 to 15 November 2031 6 month Option Period: 16 November 2031 to 15 May 2032 *(Performance period may be updated.) The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 541380, Testing Laboratories and Services; Size Standard $19,000,000.00. Product Service Code is L049, Technical representative services- maintenance and repair shop equipment. Please note the following: The solicitation number for this requirement is N32253-27-Q-0001 Quotes are due no later than 11/02/2026 at 11:00 a.m. HST. Quotes must be sent via email to both the primary and secondary points of contact. All firms or individuals responding must be registered with the System for Award Management(SAM) (https://www.sam.gov) by the award date. As part of the price quote package, the Offeror shall submit the completed SF 1449 with blocks 17a., 30a., 30b. and 30c. (SF 1449 page 1) and CLIN information (SF 1449 page’s 3-5) completed. Submission of a signed offer to the Government constitutes agreement and acceptance of the solicited terms and conditions. The Government may revise the solicitation at any time by means of an Amendment. It is an offeror’s responsibility to ensure it is accessing the Government Point of Entry (GPE) website, https://sam.gov/, to view potential amendments and procurement notifications for this solicitation. The proposal shall include: Technical Capability - Please submit a detailed technical quote (not to exceed 10 pages) that clearly demonstrates thorough knowledge and understanding of, and approach to completing the work in accordance with the PWS. The technical quote must contain sufficient details so that it may be evaluated in accordance with the PWS and comply with the period of performance set forth in the solicitation. Nonconformance will deem an Offeror ineligible. The technical quote must consist of a clear plan demonstrating how the offeror will Perform Calibration, Preventative Maintenance and as-needed Remedial Repair Services as required in the PWS. Certifications - Offerors must provide proof it meets the requirements set forth in NAVSEAINST 4734.1B, "Commercial calibration activities, including Original Equipment Manufacturers (OEM), that calibrate NAVSEA TMDE will be certified or accredited by an accrediting body approved NAVSEA 04 to be in compliance with references (p), (r) and/or (s), and the scope of accreditation must cover the appropriate measurement parameters and ranges of the calibrations performed." The Contractor must, for the entire period of performance, maintain a certification or accreditation in compliance with NAVSEAINST 4734.1B. The Contractor's accreditation body must be approved by NAVSEA 04, and the scope of accreditation must encompass all measurement parameters and ranges for the NAVSEA Test, Measurement, and Diagnostic Equipment (TMDE) calibrated under this contract. The Contractor shall make proof of current certification available for Government inspection upon request. Itemized Price Breakdown - Provide an itemized price breakdown of the quote that clearly and concisely describes and defines the Offeror's response to the requirements contained in the solicitation. Cybersecurity Maturity Model Certification (CMMC): DFARS clause 252.204-7021 and DFARS provision 252.204-7025 related to Cybersecurity Maturity Model Certification (CMMC) requirements are included in the solicitation involving Federal Contract Information (FCI) or Controlled Unclassified Information (CUI), on unclassified information systems, effective November 10, 2025. Offerors must possess a valid CMMC Level 1 (Self Assessment) certification at the time of award and for the duration of any resulting contract. The Government will verify the Offeror's CMMC Level 1 (Self-Assessment) certification at the time of award. Offerors failing to meet the requirements in DFARS clause 252.204-7021 and DFARS provision 252.204-7025 will be deemed ineligible for award. The Offeror shall provide, in the proposal, the CMMC unique identifier(s) (CMMC UIDs) issued by SPRS for each contractor information system that will process, store, or transmit FCI or CUI during performance of a contract, task order, or delivery order resulting from this solicitation. Offers must be received no later than the exact closing date and time specified in Block 8 of the SF 1449 (or as updated via subsequent amendments). Offerors are hereby advised that the size limit including attachments is 35 MB per email. Emails that exceed this size limit will not be received by the Government. It is the Offeror's sole responsibility to ensure their Offer is received by the Government POCs no later than the specified closing date and time. When necessary to comply with this size limit, the Offeror may deliver their Offer through multiple emails, with each email clearly marked in the Subject Line indicating its sequence order within the total number of emails being transmitted (for example, email 1 of 3). Offers received after the due date may not be considered unless the Contracting Officer determines that the delay was caused solely by the Government and accepting the Offer is in the best interest of the Government. Contract award will be in accordance to 52.212-2 as stated in the solicitation. All questions regarding solicitation N32253-25-Q-0001 shall be submitted in writing via email to the listed POCs. Questions are due 10/23/2026 03:00 PM HST. | - | Solicitation | 11/02/2026 |
The Government is seeking to acquire environmental testing services, using MIL-STD-810H procedures, in accordance with Attachment 1 - Statement of Work (SOW). To be considered acceptable and eligible for award, quotes must provide all of the items and quantities listed in the DESCRIPTION OF REQUIREMENTS section of the attached Combined Synopsis Solicitation. The Government will not consider quotes or offers for partial items or quantities. Please see all Attachments further descriptions, details, and instructions. Questions Due Date and Submission Requirements: All questions must be received before 26 May 2026 at 10AM, Pacific Time. Questions must be submitted via email to the Government RFQ Point of Contact listed below. Include RFQ# N66001-26-Q-6134 on all inquiries. Questions may be addressed at the discretion of the Government. RFQ Due Date and Submission Requirements: This RFQ closes on 26 May 2026 at 12PM, Pacific Time. Quotes must be submitted via the Solicitation Module within the Procurement Integrated Enterprise Environment (PIEE) website at https://piee.eb.mil, under Notice ID N66001-26-Q-6134. E-mail quotes or offers will not be accepted and late quotes will not be accepted. PIEE Assistance: For PIEE technical issues, see the Vendor Customer Support resources at https://cac.piee.eb.mil/xhtml/auth/web/homepage/vendorCustomerSupport.xhtml.Government RFQ Point of Contact: The point of contact for this solicitation is Trinity Anglo at trinity.l.anglo.civ@us.navy.mil. Reference RFQ# N66001-26-Q-6134 on all email exchanges regarding this acquisition. Amendment 01- To extend the response deadline to 1:00PM Pacific on 5 May 2026 to allow for competitive quotes. Amendment 02 - To extend the response deadline to 1:00PM Pacific on 8 May 2026 to allow for competitive quotes. Amendment 03 - To extend the response deadline to 12:00PM Pacific on 20 May 2026 and remove the small business set-aside. Amendment 04 - To extend the response deadline to 12:00PM Pacific on 26 May 2026 to allow for competitive quotes. | - | Combined Synopsis | 05/26/2026 |
***Amendment 0002 has been made answering questions (11-13)*** ***Updated Q and A posted as well******Amendment to the solicitation has been made to include all answers in the Q and A document that will be posted in SAM.Gov****THIS REQUIREMENT IS ONLY FOR SEAPORT MAC HOLDERS TO SUBMIT A PROPOSAL AND THE SOLICIATION NUMBER IN THIS SYSTEM HAD TO BE CHANGED TO N3904026R0003 DUE TO A GLITCH, THE ACTUAL SOLICIATION NUMBER AS YOU WILL SEE ON ALL DOCUMENTION IS N3904026R0002* Portsmouth Naval Shipyard (PNS) has a requirement for Receipt Inspectors to support the Receipt Inspection Services within the Quality Assurance (QA) Department. Receipt Inspection provides assurance that the materials procured for use on Naval Nuclear Submarines meet the required and specified requirements before being issued. | - | Solicitation | 03/27/2026 |
The US Army Corps of Engineers, New York District (NYD) intends to issue a solicitation package seeking to award one Indefinite Delivery Indefinite Quantity (IDIQ) contract for the Chemical Testing of Dredged Material. The IDIQ contract would include the sampling and testing of dredged material proposed for placement at the Historic Area Remediation Site (HARS). HARS sampling and testing would adhere to the procedures, and their subsequent updates, as described in: 2016 US Army Corps of Engineers New York District/EPA Region 2 Guidance for Performing Tests on Dredged Material Proposed for Ocean Disposal (a.k.a. Regional Testing Manual) (http://www.nan.usace.army.mil/Portals/37/docs/regulatory/Formdoc/FINAL_NYD-R2_REGIONAL_TESTINGMANUAL-APRIL%202016.pdf) 1991 EPA/USACE, Evaluation of Dredged Material Proposed for Ocean Disposal (a.k.a. the Green Book) (https://www.epa.gov/sites/production/files/2015-10/documents/green_book.pdf). The IDIQ contract would also include the sampling and testing of dredged material proposed for upland placement. “Upland” sampling and testing would adhere to the procedures, and their subsequent updates, as described in: New Jersey Department of Environmental Protection (NJDEP) New Jersey Administrative Code (NJAC), Title 7, Chapters 9 and 26 (a.k.a. ‘NJAC 7’) (https://dep.nj.gov/rules/current-rules-and-regulations/) New York State Department of Environmental Conservation (NYSDEC) manual, entitled “Technical & Operational Guidance Series (TOGS) 5.1.9 In-Water and Riparian Management of Sediment and Dredged Material” (November 2004) (a.k.a. ‘TOGS 5.1.9’) (https://www.dec.ny.gov/docs/water_pdf/togs519.pdf) New York State Department of Environmental Conservation, New York Codes, Rules and Regulations (NYCRR), Title 6, Part 375 (December 2025) (a.k.a. ‘6 NYCRR Part 375’) (https://dec.ny.gov/sites/default/files/2025-12/6nycrrpart375final.pdf). Other state procedures may also be requested and would be coordinated between NYD and the contractor to determine capabilities. Additional work under this contract will include analyses of sediment, tissue, and water and may include environmental DNA/metagenomic analyses related to HARS monitoring in accordance with the following document and any subsequent updates: U.S. Army Corps of Engineers (USACE) New York District and Environmental Protection Agency (EPA) Region 2, Site Management and Monitoring Plan for Historic Area Remediation Site (HARS) (July 2020). Task orders would include all or some of the following: sediment and water collection (on Contractor-supplied ship) handling, processing and shipping of samples physical and chemical analyses quality assurance (QA) and quality control (QC) procedures, and necessary corrective actions. For each task order, the contractor would provide reports containing the sampling logs, all testing results and QA/QC information in the format required by NYD, EPA – Region 2, and/or state agencies. In addition to sampling and testing for ocean placement, NYD also requires that contractors be capable of performing testing procedures such as the Synthetic Precipitation Leaching Procedure (SPLP), the Toxicity Characteristic Leaching Procedure (TCLP), and the Modified Elutriate Test (MET), which are required for upland placement of dredged material in the states of New York and New Jersey. Prior to sampling and testing, a Work/Quality Assurance (QA) Plan and an Accident Prevention Plan (APP) would need to be prepared by the contractor and approved by NYD. A Work/QA Plan must include: descriptions of all technical procedures for field sampling, laboratory analyses (e.g. biological, physical) for HARS and upland testing, data reduction and validation, and reporting clearly written standard operating procedures (SOP) for all field, experimental and analytical procedures clearly defined QA objectives that are consistent with the regulations (e.g. Regional Testing Manual, Green Book, NJAC 7, TOGS 5.1.9, and 6 NYCRR Part 375) and if applicable, permit application mechanisms for conducting performance and systems audits during the course of the field laboratory work procedures for detecting problems with sampling and analytical work, and implementation of corrective actions in a timely manner. All sampling would be performed within the Port of New York & New Jersey, all Federal Navigation Channels within New York District, the length of the Hudson River, in the Atlantic Ocean at the Historic Area Remediation Site and its Mud Dump Reference Site. “New Work or Harbor Deepening” projects may be proposed and coordinated between NYD and the contractor. A detailed description of work required for these contracts will be provided in its entirety upon issuance of the complete solicitation. Prior to issuance of the solicitation, it is highly recommended that interested parties read the required regulations (e.g. Regional Testing Manual, Green Book, NJAC 7, TOGS 5.1.9, and 6 NYCRR Part 375) in order to obtain a thorough understanding of the work required by the NYD and EPA – Region 2 dredged material testing program. The Period of Performance will be five (5) years from the issuance of the Notice to Proceed (NTP). The contract magnitude will be up to $10,000,000.00 for five (5) years – up to $2,000,000.00 each year. One contract will be awarded on an Unrestricted Full and Open Competition basis to the lowest bidder who has, within the last 18 months, demonstrated their capability of performing the program’s work to EPA – Region 2. A bidder can prove their capability through one of the following: the bidder has received, within the last 18 months from EPA – Region 2, documentation stating that the laboratory has submitted data that is fully acceptable or acceptable with qualification; or the bidder has satisfied the Demonstration of Capability (DOC) requirements for the NYD and EPA – Region 2 dredged material testing program. The North American Industry Classification System (NAICS) code is 541380. The business size standard is $25,500,000. | - | Pre-Solicitation | 11/23/2026 |
Additional Details
Solicitation Number
N0017424R0060
Archive Date
Apr 20, 2024
Office Address
INDIAN HEAD, MD, 20640-1533