GovChime
Notice ID: 6294bede77564e32accaabad2c60572aCombined Synopsis/SolicitationArchived

Government Furnished Hardware: REPLATE AND STRIP

Archived on January 24, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
8:00 AM EST
Posted
December 19, 2025
Notice type
Combined Synopsis/Solicitation
NAICS
332813: Electroplating, Plating, Polishing, Anodizing, and Coloring
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSEA.NAVSEA WARFARE CENTER.NSWC INDIAN HEAD DIVISION
Place of performance
Indian Head, Maryland, 20640
Last updated
Nov 4, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
N0017426Q1013
Notice ID
6294bede77564e32accaabad2c60572a

Description

This is a solicitation is a for non-commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: Government Furnished Hardware: REPLATE AND STRIP (Cartridge Retainer, Firing Pin Housing, Cap, and  Initiator Chamber) . This solicitation will be competed as Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017426Q0013. The NAICS code is 332813 and the business size standard is 500. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2020-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20190531.

The Government will award a contract resulting from this solicitation to the responsible vendor whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

Evaluation Factors (in order of importance)

  1. Technical – Quotes must reflect the required specifications within the Statement of Work
  2. Price – Quotes must include all applicable costs.

In order to submit a quote, technical drawings must be requested.

Technical Drawings:

This procurement includes unclassified controlled technical information assigned a restricted distribution statement which is export controlled. To receive this unclassified controlled technical information, an Offeror must be currently certified through the United States/Canada Joint Certification Program. To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint  Certification Office. Canadian Offerors may submit either a completed DD Form 2345 or DSS-MAS 9379 for certification. In addition, a copy of the company's State/Provincial Business License, Incorporation Certificate, sales Tax Identification Form or other documentation which verifies the legitimacy of the company must accompany all DD Form 2345s. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP/. Offerors are encouraged to apply for certification as early as possible in order for processing and receipt of information to be completed in sufficient time to prepare a proposal before solicitation closing.

If interested, technical drawings need to be requested by contractor prior to submission date. ITAR certification is required to be provided prior to technical drawing release. Drawing requests must be made via email to Francine.l.keys.civ@us.navy.mil  , and marlene.l.ridgell.civ@us.navy.mil  by Friday, 09  January 2026, 8:00 AM EST.

Questions/clarification regarding this solicitation must be submitted via email to Francine.l.keys.civ@us.navy.mil  , and marlene.l.ridgell.civ@us.navy.mil  by Friday, 09 January 2026, 8:00 AM EST.

Quote packages are due by Friday, 09 January 2026 ,8:00 AM EST.  Late quotes will not be considered. Quote packages shall be sent to francine.l.keys.civ@us.navy.mil ,and  marlene.l.ridgell.civ@us.navy.mil and contain a cover sheet that provides the following information:

1. Official Company Name;

2. Point of contact including name and phone number; and

3. DUNS number and Cage Code.

The Points of Contact for this acquisition is

  1. Francine.keys, at Francine.l.keys.civ@us.navy.mil
  2. Marlene Ridgell at marlene.l.ridgell.civ@us.navy.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (1)

  • REPLATE 26Q1013.pdf

    25 MBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    Government Furnished Hardware: REPLATE AND STRIP

    Notice 6294bede77564e32accaabad2c60572a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price purchase order on a non-competitive basis to: Seven of Richmond, NC, 2517 Patricia Road, Richmond, Virginia, 23231 Seven of Richmond is the original equipment manufacturer (OEM) and does not authorize third-party resellers or distributors. Therefore, direct sole-source procurement from the OEM is the only viable method to satisfy this requirement. Seven of Richmond LLC. due to the increased time and cost of first article and lot acceptance testing. This action is to be undertaken in accordance with the Federal Acquisition Regulation (FAR) Revolutionary FAR Overhaul (RFO) 12.102(a) on the basis that only one source is available in meeting the government’s requirements. The North American Industry Classification System (NAICS) for this requirement is NAICS CODE :332993. The Product Service Code (PSC) code is 1377. The resulting award will be a firm fixed price purchase order. This Notice of Intent is NOT a request for quotes. Interested parties may identify their capability to respond to this requirement by Nov 27, 2026, at 5pm.(EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. The determination not to compete this proposed purchase order is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gove/portal/public/SAM. Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements and capabilities to Tammy Kershner, via email: tammy.r.kershner.civ@us.navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability.
51%
Special Notice11/27/2026
1.0 Disclaimer This Request for Information (RFI) is issued solely for information and planning purposes. It does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This RFI does not commit the U.S. Government (USG) to contract for any supply or service whatsoever. Furthermore, the USG will not accept unsolicited proposals in response to this RFI. Responders are advised that the USG will not pay for any information or administrative costs incurred in response to this RFI. All costs associated with responding to this RFI will be solely at the interested party’s expense. The information gathered by this RFI will be shared with relevant interested USG parties to help inform future development and procurement efforts. 2.0 Background The Joint Product Manager for CBRN Layered Effects is responsible for enabling and enhancing the survivability of our Joint Warfighters so they can fight and win across all domains in a CBRN-contested environment. As the acquisition leader in mobile analytics, our portfolio provides transformative solutions – including advanced reconnaissance systems, sensors, and mobile analytical laboratories – that ensure our military is safeguarded against chemical, biological, radiological, and nuclear threats. To support this mission, the USG is pursuing the Screening Obscuration Module - Multispectral (SOM-M) program, which is envisioned as a modular, man-portable, ground-emplaced obscuration and screening system designed to produce a multispectral obscurant cloud for both mounted and dismounted use. In support of the SOM-M program, the USG is issuing this Request for Information (RFI) to identify alternative, cost-effective commercial manufacturing options for critical, novel bispectral obscurant material. The technical requirements for this capability are detailed in Section 4.0 of this document. 3.0 Purpose The purpose of this RFI is to survey industry capabilities and identify alternative commercial manufacturing options for a novel bispectral obscurant material. Specifically, the USG seeks to identify manufacturers capable of performing high-volume Physical Vapor Deposition (PVD) of Silicon Dioxide (SiO2) onto Aluminum Flakes at a commercial scale, and to assess industry readiness to support a potential Army-funded manufacturing maturation project aimed at reducing sustainment costs. 4.0 Technical Requirements Interested parties must demonstrate capabilities or conceptual pathways to meet the following production and material requirements: Base Material & Size: Aluminum Flake sized at 2 – 4 microns. Coating Process & Material: Physical Vapor Deposition (PVD) of Silicon Dioxide (SiO2) onto the aluminum flakes. Target Production Volume: Scalable to large commercial quantities, ranging from hundreds of pounds (lbs) to tons. Cost Efficiency: Proposed alternative manufacturing options must significantly reduce current manufacturing protocol costs to ensure long-term sustainment capability for the military services. 5.0 Requested Information Interested parties are requested to respond to this RFI providing a white paper including technical insights on the manufacturing feasibility, cost-effectiveness, and scalability of the proposed Physical Vapor Deposition (PVD) process. Ideal responses will include the following elements: Manufacturing/Production Approach: A comprehensive overview of the proposed methodology to achieve the PVD coating of Silicon Dioxide (SiO2) on Aluminum Flakes (2 – 4 microns). This should include details on the facility scale, equipment, and proposed lead times based on the scale of material produced. Cost Projections & Scale: Estimated cost profiles and projected cost-reduction curves when scaling production from hundreds of pounds to tons, demonstrating how the approach achieves a sustainable cost profile for long term acquisition. Maturity, Capacity, & Risks: An assessment of current facility readiness, current and potential production capacity, and identified technical and manufacturing challenges or risk factors associated with scaling this specific PVD coating process. Company Information & Past Performance: A brief summary of relevant company experience, facility capabilities, or prior similar material coating efforts. 6.0 Submission Requirements All submissions must be electronic and adhere to the following formatting and content rules: Page Limit: All responses shall be no longer than five (5) pages. Formatting: Standard 8.5 x 11-inch pages, with font size no smaller than 10-point. Company Information: Include official company name, address, telephone number, website, and business type (large/small business classification), CAGE Code. Point of Contact: Provide the name, title, telephone number, and email address of the authorized company representative. 7.0 Submission Guidance Submission Deadline: Responses are requested no later than 5 PM EST Friday, 13 November 2026. Submissions and/or questions should be emailed directly to the following point of contact: Emily McGill, Contract Specialist, emily.c.mcgill.civ@army.mil Samantha Degele, Contracting Officer, samantha.l.degele.civ@army.mil
44%
Market Research11/13/2026
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A SOLICITATION WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. The Naval Surface Warfare Center Indian Head Division (NSWC IHD) intends to award a firm-fixed-price contract on a non-competitive basis to Cartridge Actuated Devices, Inc. (CAGE: 16148), located at 51 Dwight Pl, Fairfield, NJ 07004, for the acquisition of the following supply: Item Description: Squibs for Fire Sprinkler Valves (Primer, Part Number: 074080-3) Quantity: 50 Units This action is being undertaken in accordance with FAR 13.106-1(b)(1) on the basis that Cartridge Actuated Devices, Inc. is the only known source capable of meeting the Government’s requirements, utilizing the simplified procedures for certain commercial items authorized under 41 U.S.C. 1901 (implemented by FAR Subpart 13.5). The North American Industry Classification System (NAICS) code for this requirement is 325920 (Explosives Manufacturing), and the Federal Supply Code (FSC) is 1377 (Cartridge and Propellant Actuated Devices and Components). This Notice of Intent is not a request for competitive proposals. However, interested parties may identify their interest and capability to respond to this requirement. All capability statements received by November 03, 2026, at 10:00 AM EST will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Interested vendors must be registered in the System for Award Management (SAM) database at https://www.sam.gov prior to submission. Responses must be submitted electronically via email to Shannon Wooten, Contract Specialist, at shannon.d.cloud-wooten.civ@us.navy.mil (or shannon.cloud-wooten@navy.mil) no later than 10:00 AM EST on November 03, 2026.
43%
Special Notice11/03/2026
This announcement should not be construed as a commitment by the U.S. Government. The U.S. Navy does not intend to award a contract based on this Request for Information/Sources Sought Notice. THIS IS NOT A Request for a Proposal AND DOES NOT OBLIGATE THE U.S. GOVERNMENT TO ISSUE an RFP. This RFI is for U.S. Government planning purposes only and constitutes requests for exchange of information pursuant to FAR Part 10. The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Contracts Department, Code 02 is conducting Market Research on the Loaded Cartridge Assembly, DODIC MC91. NSWC IHD is conducting a market survey to identify sources/vendors capable of supplying the MC91 cartridge satisfying the following requirements: 1. The cartridge needs to meet the criteria specified by WS6061 and WS6052, ADL 2429839, their lower-tier documents, and be compatible with the MK 5 MOD 0 Explosive Bolt (M254), a critical component on the AN/BST-1 Buoy system. The Technical Data Package (TDP) contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.). To receive the TDP, interested vendors must submit a written request accompanied by an approved DD Form 2345 (Military Critical Technical Data Agreement), signed NDA, and active CAGE code. 2. Contractor must be able to stand up a manufacturing line and be able to support the U.S. Government by providing all deliveries within one year of award. 3. Procurement includes production units (QTY 100) as well as all associated destructive test samples required for qualification and acceptance. This procurement includes the manufacture, testing (including nondestructive testing (NDT/radiographic) capabilities), packaging, and delivery of the MC91 Cartridge Assembly. Request your company provide responses to the following questionnaire: Does your company have a production line available that can meet the requirements mentioned above? If yes, describe your company's history and experience with supplying this item (or similar cartridges for explosive bolts) including the total number supplied to date and how the facilities are ready to support USG requirements. What is your company’s availability of inert metal parts or existing validated energetic loading lines? If the MC91 cartridges are not currently in stock, when would they be available for delivery? How many days or months after an award? Can your Company provide the rate of production the manufacturing facility is capable of per year? Can your company provide a Rough Order of Magnitude (ROM) unit price estimate based on the stated quantity of 100 production units plus required test samples, along with estimated stepped pricing for higher production rates? Do test reports exist that demonstrate the MC91 (or similar cartridges for explosive bolts) manufacturing accuracy and reliability? Actual reports are not required to be submitted as part of this request for information but will be accepted after your initial response to this request. Are you able to supply documented ability of your company's MC91 cartridges to function reliably with the MK 5 MOD 0 Explosive Bolt? Does your facility hold the necessary ATF licensing, Net Explosive Weight (NEW) storage capacity, and compliance with DoD 4145.26-M to manufacture, assemble, and store loaded MC91 cartridges? Describe your inspection capabilities for energetic components, specifically hermetic seal testing (helium leak rate) and real-time radiography (X-ray) for internal explosive pellet/column alignment. What are the lead times for primary energetic ingredients/mixes and specialized metal hardware required by WS6061 and WS6052? Are any materials obsolete or sole-sourced? Does your company possess or capability to produce all tooling, crimping dies, and electrical/bridgewire resistance test fixtures required to manufacture this item, or would Government-Furnished Equipment/Tooling (GFE/GFT) be required? Small Business Subcontracting & Nonmanufacturer Rule Compliance: If responding as a Small Business prime under NAICS 325920, please clarify your manufacturing approach: Does your company intend to perform at least 50% of the cost of manufacturing (excluding material costs) in-house at your own safety-approved facility? If you do not manufacture the cartridges in-house, do you intend to source the MC91 cartridges from another domestic small business manufacturer? If you intend to partner with a large business manufacturer, are you aware of the requirements to obtain an individual SBA Nonmanufacturer Rule (NMR) waiver prior to solicitation close? All interested sources shall provide the organization name, address, point of contact, phone number, e-mail address, business size, Unique Entity ID, and CAGE Code. In addition, all interested sources shall provide a summary of their company’s capabilities and delivery timeframe and schedule. All responding sources must email their response submissions no later than 17:00 Eastern Time on November 9, 2026 to the Point of Contacts (POCs) listed below. Submissions must be in PDF format and shall not exceed fifteen (15) pages in total. 1) NSWC IHD Attn: Michael Persinger Picatinny Arsenal, NJ 07806 Michael.a.persinger2.civ@us.navy.mil 2) NSWC IHD Attn: Gerardo Ilaria Picatinny Arsenal, NJ 07806-5000 gerardo.ilaria.civ@us.navy.mil
40%
Market Research11/09/2026
This is a combined synopsis/solicitation for commercial items prepared in accordance with the FAR Overhaul Part 12 and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested, and a separate written solicitation will not be issued. Solicitation 70ZU0127P21004B00 is issued as a Request for Quotation (RFQ) This solicitation incorporates provisions and clauses by reference. Full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This acquisition is unrestricted. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. It is the Government’s belief that only Bitzer UK and/or their authorized distributors can offer these units. Concerns having the expertise and required capabilities to provide this item are invited to submit complete information discussing the same within two (2) calendar days from the day this notice posted. The data must include sufficient details to allow the Coast Guard to evaluate the proposal relative to the requirements. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor verifying the OEM will supply genuine OEM parts. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Award will be made on a Best Value Basis as result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. Best Value will be evaluated by who meets all technical requirements, who meets our required time frame and by price. All quotes shall be emailed to Courtney Gustin via Courtney.C.Gustin@uscg.mil and shall be received no later than 10 NOV 26 at 10:00 am (eastern). All emails quotes shall have 70ZU0127P21004B00 in subject of email. Item 1) NSN: 5342-15-018-1172 ANODE SUPPORT CONDENSOR ANODE SUPPORT USED ON THE 154 WPC VESSELS. EACH ITEM MUST BE INDIVIDUALLY PACKAGED AND MARKED MFG: BITZER UK PN: 31802871 QTY: 350 EA REQUIRED DELIVERY DATE: 06 DECEMBER 2026 INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MILSTD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BARCODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. IF VENDORS CANNOT INDIVIDUALLY PACKAGE, PACK, MARK AND BAR-CODE AS REQUIRED, VENDORS MAY USE A THIRD PARTY TO PACKAGE ITEMS AS REQUIRED IF NECESSARY. PROVIDE ADDITIONAL COST WITH QUOTATION. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED WILL NOT BE RECEIVED BY THE WAREHOUSE AND WILL NOT BE ACCEPTABLE. SHIP-FOB DESTINATION TO: USCG SFLC RECEIVING ROOM – BLDG. 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 All invoicing for Purchase Order will now be entered and processed through www.ipp.gov. FAR CLAUSES: This order is subject to but not limited to the following Federal Acquisition Regulations: 52.204-19 Incorporation by Reference of Representations and Certifications. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-2 Evaluation-Commercial Products and Commercial Services. 52.212-4 Contracts Terms and Conditions. 52.222-50 Combat Trafficking in Persons. 52.222-90 Addressing DEI Discrimination by Federal Contractors. 52-225-1 Buy American-Supplies. 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act. 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. 52.247-34 F.O.B. Destination.
38%
Combined Synopsis11/10/2026

Additional Details

Solicitation Number

N0017426Q1013

Archive Date

Jan 24, 2026

Office Address

INDIAN HEAD, MD, 20640-1533