Notice ID: 46cc828342b34ca29adf6277e89f54b6Solicitation
Combi Ovens for USNA
Archived on September 23, 2020. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 11:00 AM UTC−04:00
- Posted
- September 3, 2020
- Notice type
- Solicitation
- NAICS
- 333318: Classification Not Available
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVSUP FLT LOG CTR NORFOLK
- Place of performance
- Annapolis, MD, 21402
- Last updated
- Apr 29, 2026
Identifiers
- Solicitation number
- N0018920Q0609
- Notice ID
- 46cc828342b34ca29adf6277e89f54b6
Description
The procurement of six (6) professional grade roll-in and 4 stackable combi-ovens and procure associated accessories used in food production for the United States Naval Academy.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0018920Q0609- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- SolicitationCurrentSep 3, 2020
Combi Ovens for USNA
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a combined synopsis/solicitation for commercial item prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: 65” Dual Heat Wide Formant Roll Laminator. This solicitation will be competed as a Brand Name or Equal, Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017427Q1002. The NAICS code is 333310 and the business size standard is 1000. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2025-06 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251701. The Government will award a contract resulting from this solicitation to the vendor responsible whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. The Government will make award based on the availability of funds. Specifications: Laminator Series that delivers versatility, quality and economy all in one easy-to-use unit. The machine can laminate, encapsulate, and mount both vinyl and paper media. Its dual heated rollers can be controlled independently to temperatures up to 266ºF allowing for maximum adhesion for many applications. Operators can encapsulate using 1.5 – 10mil low melt films, cold laminate with PSA film, and board mount with just a few simple changeovers. Accepts film rolls to 10” OD on front and rear swing-out supply shafts for easier set-ups and fewer film changes and are available with a motorized rear rewind option for roll-to-roll applications. The swing up feed table and convenient 36” table height makes it easier for busy operators to stage multiple jobs. REQUIREMENTS Key requirements: Laminating Width up to 65" Dual Heated Rollers Adjustable Speed Control up to 13'/min Roller Gap Control allowing 1" Mounting Capability Web Clutch Adjustment Accommodates LOW MELT Laminating Film 1.5-10mil in Thickness/li> Two Swing-Out Shafts and Two Front Unwind Shafts Dual Tension Control Print Pressure Plate Installation Included 1 Year Mfr Warranty Parts and Labor Core Size – 3” Adjustable Temperature – Yes Moving Idler Bar – Yes Ready Light – Yes Mounting Capability – Yes (1”) Safety Approval – CE Roller Gap Adjustment - Yes Safety Shield – Yes Feed Table Alignment Guide – Yes Speed Feet Per Minute – 0 – 13 fpm Display Type - LCD Machine Dimensions – 69”W x 36” H X 49”D Electrical Requirements – 220V, 60Hz, 22 amps single phase: MAX 5700W Adjustable Speed Control – Yes Reverse Function – Yes Laminating Type – Hot/Cold Max. Laminating Width – 65” Warm up Time – 10 – 20 minutes Min/Max Film Thickness – 1.5 – 10 mil (Low Melt) Evaluation Factors (in order of importance) Technical – The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. To be determined technically acceptable, the quote must clearly demonstrate compliance with all specifications listed under the "Requirements" section. Offerors proposing an "equal" product must submit descriptive literature, product data sheets, or technical specifications that explicitly verify the proposed machine meets or exceeds every key requirement. Price – Quotes must include all applicable costs. Submitted quotes are NOT TO EXCEED $350,000.00 (Simplified Acquisition Threshold). Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Wednesday 18 November 2026 by 4 PM EST. Quote packages are due by 24 November 2026 by 4 PM EST. (COB). Late quotes will not be considered. Please fill in clauses in RFQ as they apply to your business. Quote packages shall be sent to barbara.j.grinder.civ@us.navy.mil and contain a cover sheet that provides the following information: 1. Official Company Name; 2. Point of contact including name and phone number; and 3. DUNS number and Cage Code. The Points of Contact for this acquisition is: Barbara.j.grinder.civ@us.navy.mil | - | Combined Synopsis | 11/24/2026 |
Solicitation N0042124Q0078 is issued as a combined synopsis/solicitation. The Government intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order on sole source basis with Atlanta Attachment Company, Inc., under the authority of FAR Part 12 and FAR Part 13. Offerors must be registered in the System for Award Management (https://www.sam.gov/sam/)database prior to submission of an offer to be considered for award of any DoD contract. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by 5:00 (EST) on 2 January 2024 will be considered by the Government. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. Facsimile proposals are acceptable. For information contact: Cathleen Emmart, EMAIL: cathleen.m.emmart.civ@us.navy.mil Please provide the following information with your response. (1) FOB: ______________________ (2) Shipping Cost: ______________ (3) Tax ID# ____________________ (4) UEID# _____________________ (5) Cage Code: _________ You must be registered in System for Award Management (Sam.Gov) (6) Business Size: Small Business Yes or No (7) GSA or SEWP Contract # if applicable: ________________________ (8) Estimated delivery time after issuance of purchase order ____________________ (9) Published Price list. *YOU MUST SUBMIT SIGNED DOCUMENTATION FROM THE OEM VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR* | - | Combined Synopsis | 01/02/2024 |
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Combi Oven product line as a candidate for a VA-wide (otherwise referred to as “national”) Requirements contract. Combi Ovens are thermally insulated chambers used in cooking for warming, cooking, and baking food, typically fueled by either natural gas or electricity. Food service ovens have thermostatic controls, which turn the oven on and off and select the temperature at which the oven will operate, and, usually, a timer. Food service ovens may have complex, computer-based controls allowing a wide variety of operating modes. They may be freestanding or countertop units. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Combi Oven to be used by cooks within the VA medical centers and facilities, Continental United States (CONUS) and Outside the Continental United States (OCONUS). The period of performance is for a base of 12-months with four 12-month option periods. Please see the RFP and attachments for more information. | - | Solicitation | 10/21/2026 |
Due to the new Fiscal Year, the solicitation for Fire Fighting Trainers changed from N6134019R0031 to N6134020R0013. Please review the draft solicitation under the new number, N6134020R0013. Attached is the question/comment form (L-1) part of section J of the solicitation. | - | Special Notice | Open |
| - | Special Notice | Open |
Additional Details
Solicitation Number
N0018920Q0609
Archive Date
Sep 23, 2020
Office Address
NORFOLK, VA, 23511-3392