Notice ID: d2b0841f04874b34af1c911e80c38ba8Combined Synopsis/Solicitation
301 Bottom Paint
Archived on June 7, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM UTC−08:00
- Posted
- December 20, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 238320: Painting and Wall Covering Contractors
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAL UNDERSEA WARFARE CENTER
- Place of performance
- Keyport, WA, 98345
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N0025324Q0009
- Notice ID
- d2b0841f04874b34af1c911e80c38ba8
Description
Naval Undersea Warfare Center Division (NUWC) Keyport is soliciting for 301 Bottom Painting service, to Blast and Preserve Underwater Hull with a quantity of one (1) Lot. This requirement is being issued as a combined synopsis/solicitation for commercial Items in accordance with FAR 12.6, as supplemented with additional information included in the attached solicitation. This announcement constitutes the only solicitation. The Defense Priorities and Allocations System (DPAS) applicable assigned rating for this requirement is DO-C9. The solicitation, issued as request for quotation (RFQ) N0025324Q0009, is attached to this announcement. The proposed contract is 100% set aside for small business concerns. Applicable North American Industry Classification System (NAICS) code for this requirement is 238320 and has a size standard of $19,000,000. Offerors are required to provide FOB Destination pricing to NUWC Keyport, WA 98345-7610. Requirements and evaluation procedures are listed in the attached solicitation, which is required to be filled out in its entirety and returned before the solicitation closes. All questions regarding this solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and Offers should be submitted via e-mail to: genelle.t.murray.civ@us.navy.mil. No paper copies will be accepted. Only digital copies sent via email will be accepted. Failure to complete all representations and certifications found within the solicitation and respond to this RFQ with associated amendments if applicable prior to the closing date and time established may render an offer non-responsive and result in rejection. Company quote forms will NOT be accepted. All details regarding the vendor offer shall be documented in the RFQ. The government terms and conditions (T&Cs) listed in this solicitation are required by law through the Federal Acquisition Regulations (FAR) and the Department of Defense FAR Supplement (DFAR). It is preferred that company T&Cs not be included with your quote submittal as many company T&Cs are inconsistent with federal law and unenforceable. Provisions and clauses in effect through the latest Federal Acquisition Circulars are included in the solicitation. To access the clauses/provisions to be completed, download the Federal Acquisition Regulations at http://acquisition.gov/far/. Download the Defense Federal Acquisition Regulations (DFARS) at http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. The offeror must have a current registration and completed representations and certifications in the System for Award Management (SAM) at website https://sam.gov/ a Federal government owned website.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N0025324Q0009- Combined Synopsis
- 5×Combined SynopsisCurrentDec 7, 2023
301 Bottom Paint
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Point of Contact. Jenna Taulman at jenna.taulman@noaa.gov Set-asides. It is anticipated that a small business set-aside will apply to any resultant solicitation(s). 238320 - Z2JZ (i) Codes for services or supplies. (i) window film installation at the National Weather Service Weather Forecast Office (WFO) located in Coraopolis, PA. The scope of service includes (a) installation of type VS20 film on nineteen (19) rectangular glass panels, two triangle glass panels, and one door; (b) re-paint existing interior painted walls and doors at the Weather Forecast Office (WFO) located in Moon Township, PA; (ii) re-paint the interior of the building. The maintenance work includes: preparing surfaces for the re-coating of primer and/or paint on walls, and metal surfaces. These work areas include offices, rooms, and corridors. Upper Level: Approximately thirteen (13) work areas. The approximate combined wall area is 4,600 sq ft. Approximately ten (10) metal doors with jambs (both sides) on this level will require painting. Additional door jambs with wood doors will require paint on the jambs only. Lower Level: Approximately six (6) work areas. The approximate combined wall area is 2,400 sq ft. Approximately 280 sq ft. will require the removal of carpet wall covering. These areas will involve removal of glue, full spackle, sand and surface preparation to the area, then a final dust wipe down prior to paint. Approximately two (2) metal doors with jambs (both sides) will require painting on this level. Additional door jambs with wood doors will require paint on the jambs only; (iii) Approximately six hundred (600) sq ft of sound barrier wall requires re-habilitation which includes surface preparation, removal / replacement of the top course with new block, and re-painting of both sides of the structure. Approximate wall dimensions: 27 ft overall length,10 ft height. (ii) The proposed contract action has an estimated magnitude between $25,000 - $40,000 and simplified procedures in accordance with RFO 12.201-1 will be utilized for the commercial solicitation and award; (iii) The article must be manufactured in the United States; and except for an end product that consists wholly or predominantly of iron or steel or a combination of both, the cost of domestic components must exceed 60 percent of the cost of all the components, except that the percentage is 65 percent for items delivered in calendar years 2024 through 2028; one or more of the items under this acquisition is subject to Free Trade Agreements.; (iv) technical specifications and a statement of work can be requested from Jenna Taulman at jenna.taulman@noaa.gov . Please note that a response may not be provided until around 11/09/2026; (v) a small business set-aside solicitation is expected; the resultant award is subject to all RFO FAR Part 12 and 36 clauses applicable to contracts under the simplified acquisition threshold; (vi) all responsible sources may submit a quotation which will be considered by the agency; (vii) noncompetitive contract actions/sole source - N/A; (viii) Qualification requirements - N/A; – end of Presolicitation Notice– | - | Pre-Solicitation | 11/13/2026 |
** THIS SOLICIATION IS FOR SERVICES LOCATED AT JOINT BASE LEWIS-MCCHORD WASHINGTON ** ** (13 June 2025) Update to posting - Added erroneously missing Attachments A and B to SAM soliciation package ** ** (24 June 2025) Amendment #01 - Posting industry questions and answers, revised bonding requirement, extended bid due date. ** (02 July 2025) Amendment #02 - Revised SOW, added missing UFGS TE-s, extended bid due date. ** (14 July 2025) Amendment #03 - Revised Questions and Answers, Revised TE-1, Revised TE Listing The Protective Coatings IDIQ Contract is for a broad range of maintenance, repair and minor protective coatings construction work on real property at JBLM and other supported organizations. The work is required in support of Public Works (PW) activities headquartered at Joint Base Lewis-McChord (JBLM). The contract will be an Indefinite Delivery Indefinite Quantity (IDIQ) type contract and will include a wide variety of individual construction tasks pertaining to protective coatings. During the contract period, the Government will identify construction tasks required to complete each specific job and will issue individual Task Orders (TOs) to the contractor to complete those jobs. The contractor shall be required to furnish all materials, equipment, and personnel necessary to manage and accomplish the TOs. The contractor shall be required to provide a company representative near JBLM in order to receive Requests for Proposal (RFPs), prepare and negotiate proposals, receive signed TOs and Notices-To-Proceed (NTPs), receive and initiate contract correspondence and provide other construction services to accomplish individual TOs. TOs will vary in size and may include incidental disciplines required for the protective coatings actions. | - | Solicitation | 07/23/2025 |
Pre-Solicitation Only. This is for informational purposes. No Solicitation is currently provided. The Mission and Installation Contracting Command (MICC) - Joint Base Lewis -McChord (JBLM), Washington anticipates issuing a solicitation for services necessary to manage and accomplish a broad range of protective coatings work. The purpose and scope of this indefinite delivery, indefinite quantity contract is to provide all plant, labor, logistics, tools, equipment, and materials for protective coatings at JBLM. The DPW supports multiple customers in numerous locations across JBLM. The contractor shall perform the required services required throughout JBLM-Main, North, and McChord Field. As requirements develop, the Government will issue task orders based on an established Price List, varying in size and value, and on an as-needed basis. The contractor shall have a local representative to receive work requests and other related requirements to accomplish each task order. The work may include tasks requiring various trades associated with protective coatings, surface preparation, alteration, and repair. The term of the contract will consist of a 5 year ordering period, commencing on or about 1 July 2025. The estimated magnitude of the total requirement is more than $10M. Firm-fixed price task orders placed under the contract will range in value from $2k to $6M. The Government anticipates release of the solicitation on or around 1 April 2025 with a projected closing date of 8:00 a.m., Pacific Standard Time, on 30 April 2025. Interested parties are encouraged to re-visit this site for updates to the date/time set for receipt of proposals. No paper copies of the solicitation will be distributed; the solicitation and applicable attachments and technical exhibits will only be available via the Contract Opportunities section of the SAM website at https://sam.gov/. The solicitation will provide pre-proposal conference information if needed. Prospective contractors must be actively registered in the System for Award Management (SAM) under the NAICS 238320 in order to be eligible to receive an award from this solicitation. For more information, visit the website at https://www.sam.gov/. Notification of any changes (amendments) to the solicitation will be posted only at the SAM website, https://sam.gov/. It is the prospective contractor’s responsibility to check the website frequently for any updates, amendments or any additional information. The Government will not be held responsible for any information a prospective contractor does not receive once the information is issued on SAM. | - | Pre-Solicitation | 03/29/2025 |
a. The Directorate of Public Works (DPW) at Joint Base Lewis-McChord (JBLM) requires contracted support for services necessary to manage and accomplish a broad range of protective coatings work. b. The purpose and scope of this indefinite delivery, indefinite quantity contract is to provide all plant, labor, logistics, tools, equipment, and materials for protective coatings at JBLM. The DPW supports multiple customers in numerous locations across JBLM. The contractor shall perform the required services required throughout JBLM-Main, North, and McChord Field. As requirements develop, the Government will issue task orders based on an established Price List, varying in size and value, and on an as-needed basis. c. The contractor shall furnish all personnel, equipment, tools, materials, transportation, vehicles, supervision, and other items and services necessary to manage and accomplish a broad range of protective coatings work for the maintenance, repair, and alterations of various real property facilities. The contractor shall have a local representative to receive work requests and other related requirements to accomplish each task order. The work may include tasks requiring various trades associated with protective coatings, surface preparation, alteration, and repair. | - | Market Research | 12/03/2024 |
COMBINED SYNOPSIS/SOLICITATION NOTICE: Requirement Title: Industrial Finishing Services for New Government-Furnished Millwork and Furniture Solicitation Number: N3904026Q5215 Quote Response Deadline: 1/16/2026, 5:00 PM POC: Lisa Fielding, Contracts Officer, lisa.a.fielding.civ@us.navy.mil GENERAL INFORMATION: 1. This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation will not be issued. Paper copies of this solicitation will not be available. This combined synopsis/solicitation SHALL be posted on SAM.gov. 2. This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/browse/index/far and http://www.acq.osd.mil/dpap/dars/change_notices.html. 3. This solicitation is being issued as a: Request for Quotation (RFQ) 4. This acquisition is for a: Small Business Set Aside 5. North American Industry Classification System Code (NAICS): 238320 6. The size standard is: 19 (millions of dollars) REQUIREMENT INFORMATION: The Portsmouth Naval Shipyard requests the following: Vendor to provide high-quality finishing services to newly fabricated millwork, cabinet components, furniture, and related items. The items to be finished will require various types of finishes, from standard paint to specialized coatings. The contractor will be responsible for all aspects of the finishing process, including, but not limited to: Surface preparation (sanding, cleaning, priming) Application of paints, stains, and other finishes • Quality control and inspection • Packaging and transportation of finished items The location of work will be conducted at the Contractor’s location. The vendor will pick up and return the furniture to Portsmouth Naval Shipyard. Required Period of Performance: Shall start immediately following the award and Receipt of Government Furnished Property (GFP). Vendor to return GFP to Government NLT 30 days after receiving. Place of Performance: Vendor Facility Attachments: Attachment 1: Statement of Work (SOW) Attachment 2: GFP Attachment 3: Wage Determination METHOD OF QUOTE SUBMISSION: Offeror shall submit quote directly to the Contracts Officer at lisa.a.fielding.civ@us.navy.mil Vendor must be registered in the System for Award Management (SAM) database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. | - | Combined Synopsis | 01/16/2026 |
Additional Details
Solicitation Number
N0025324Q0009
Archive Date
Jun 7, 2024
Office Address
KEYPORT, WA, 98345-7610