MAHR 130B-16 Long Gage Block Comparators
Archived on April 4, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM EDT
- Posted
- March 17, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- No Set aside used
- NAICS
- 334515: Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAIR.NAVAIR NAWC AD.NAVAL AIR WARFARE CENTER AIR DIV
- Place of performance
- St James, Maryland, 20670
- Last updated
- Nov 1, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N0042126Q1093
- Notice ID
- 3b9bd5cae5514eb1b2528b9c6cdb4cea
Description
Sole Source Solicitation
U.S. Government ~ Tax Exempt
All quotes/responses shall be submitted via email to Michael.j.coffey52.civ@us.navy.mil or Roberta.M.Nethercutt.civ@us.navy.mil no later than 20 March 2026 at 12:00pm Eastern Standard Time.
Solicitation N00421-26-Q-1093 is issued with intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and award the proposed purchase order on a sole source basis with Mahr, Inc under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 12 and 13.
Offerors must be registered in SAM.GOV database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at http://www.SAM.gov.
NO SUBSTITUTIONS
All Products Must be New
Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by than 20 March 2026 at 12:00pm Eastern Standard Time. All offers will be considered by the Government. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the Government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received.
***Instructions to Offerors***
Representation Corporation Regarding Delinquent Tax Liability or a Felony conviction under any Federal Law. All offers must complete FAR 52.204-26 within SAM. If 52.204-26 Section K is completed as “does not” for provision and use of the prohibited equipment and services, FAR 52.204-24 Section K would not be completed and submitted separately as part of the offer per direction within FAR 52.204-24 itself. If FAR 52.204-26 includes “does” for either provision or use, FAR 52.204-24 Section K is required to be completed and submitted as part of the proposal. Offers must complete 52.212-3, Offeror Representations and Certifications-Commercial Items in Section K of the solicitation.
This is a firm fixed-price procurement; therefore, the offeror’s initial offer should represent the vendor’s best quote in terms of lowest price and in accordance with Section B of the SF-18. Your quote will only be evaluated on the information you provide.
***Basis for Award***
All interested parties MUST submit a quote no later than 20 March 2026 at 12:00pm Eastern Standard Time. Award will be made to the vendor that submits the lowest, firm fixed-price quotation that meets all the requirements either in Section B. See attached SF-18.
***Instructions to Offerors***
Please include the following information with your response:
- FOB: ______________________
- Shipping Cost: ______________
- Tax ID# ____________________
- Dun & Bradstreet # _____________________
- Cage Code: _________ You must be registered in System for Award Management (Sam.Gov)
- Business Size: Small Business Yes or No
- GSA or SEWP Contract # if applicable: ________________________
- Estimated delivery time after issuance of purchase order ____________________
- Published Price list.
- Total Price
All interested parties must submit quotes to both below points of contacts.
Government Points of Contact:
Michael Coffey
NAWCAD Procurement Group, 21983 Bundy Road, BLDG 441
Patuxent River, MD 20670-1127
Email: Michael.j.coffey52.civ@us.navy.mil
Roberta Nethercutt
NAWCAD Procurement Group, 21983 Bundy Road, BLDG 441
Patuxent River, MD 20670-1127
Email: Roberta.m.nethercutt.civ@us.navy.mil
*YOU MUST SUBMIT SIGNED DOCUMENTATION VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR*
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Lifecycle
- 3Version 3Combined Synopsis/SolicitationArchivedCurrent
MAHR 130B-16 Long Gage Block Comparators
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This announcement should not be construed as a commitment by the U.S. Government. The U.S. Navy does not intend to award a contract based on this Request for Information/Sources Sought Notice. THIS IS NOT A Request for a Proposal AND DOES NOT OBLIGATE THE U.S. GOVERNMENT TO ISSUE an RFP. This RFI is for U.S. Government planning purposes only and constitutes requests for exchange of information pursuant to FAR Part 10. The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Contracts Department, Code 02 is conducting Market Research on an F-35 GAU-22 and F/A-18 M61 Range Data Acquisition System. NSWC IHD is conducting a market survey to identify sources/vendors capable of supplying a system satisfying the following requirements: The system shall consist of an integrated test and control console, computer workstation, and junction box capable of controlling and monitoring performance data for F/A-18 A/A49A-1, A/A49A-2 and F-35 GPU-8/A, GPU-9/A gun pods. The system shall interface with and control the 20mm M61A1/A2 gun in the F/A-18 A/A49A-1 and A/A49A-2 gun system configurations and must include an integrated lane-capable Gun Control Unit (GCU). The system shall interface directly with the standard GPU-8/A and GPU-9/A Gun Systems Control Unit (GSCU) for controlling 25mm gun pods. Manual swapping of control and telemetry cables between gun platforms is acceptable provided all connectors and bulkheads are military or industrial grade and rated for high-cycle insertion and removal. The system shall replicate the baseline gun acceptance output, logging, and monitoring instrumentation utilized at production gun test facilities. The data points monitored shall include: Gun rate Trigger signal Arm signal Safing signal Steady state rate Acceleration and deceleration time Hydraulic flow rate Hydraulic pressure for supply and return Hydraulic fluid temperature Hydraulic fluid temperature Hydraulic fluid pressure Rounds fired Rounds cleared The RDAS setup shall operate strictly using existing test range utility power supplies: 115 VAC, 1-Phase, 60 Hz 300 VDC, 2.0 A 28 VDC, 30.0 A The hardware must incorporate a hardwired, fail-safe "dead-man switch" accessible to the Range Safety Officer (RSO). Releasing the switch at any point during active operations shall immediately disarm the weapon drive and inhibit fire control commands. The Contractor shall provide a complete Operational and Maintenance Manual covering the custom console, software configuration, cabling schematics, calibration procedures, safety interlocks, and troubleshooting. System Drawings & Calibration Records: Applicable factory calibration data, wiring schematics, and system interconnection drawings shall accompany final hardware delivery. The Contractor shall provide hands-on operational training, integration, and dry-fire range demonstration at the Picatinny Arsenal test range following installation. The Contractor shall live fire test the system with an F/A-18 A/A49A-1 or A/A49A-2 gun system and an F-35 GPU-8/A or GPU-9/A gun pod to verify proper function prior to delivery to the government. Government test facilities are not available for live fire testing as this capability has not been established yet. Request your company provide responses to the following questionnaire: Does your company have the capability to meet all of the requirements mentioned above? If yes, describe your company's history and experience with supplying this item (or similar gun control systems). Can your company provide a Rough Order of Magnitude (ROM) price estimate? What is your company’s plan for live fire verification testing with applicable gun systems? Does your planned testing facility hold the necessary ATF licensing, Net Explosive Weight (NEW) storage capacity, and compliance with DoD 4145.26-M to perform the live fire verification testing? All interested sources shall provide the organization name, address, point of contact, phone number, e-mail address, business size, Unique Entity ID, and CAGE Code. In addition, all interested sources shall provide a summary of their company’s capabilities and delivery timeframe and schedule. All responding sources must email their response submissions no later than 16:00 Eastern Time on 13 November 2026 to the Point of Contacts (POCs) listed below. Submissions must be in PDF format and shall not exceed fifteen (15) pages in total. 1) NSWC IHD Attn: David Harvey Picatinny Arsenal, NJ 07806 david.r.harvey16.civ@us.navy.mil 2) NSWC IHD Attn: Sean McAvoy Picatinny Arsenal, NJ 07806-5000 sean.p.mcavoy.civ@us.navy.mil | 43% | Market Research | 11/13/2026 |
National Instruments Hardware | 43% | Combined Synopsis | 06/16/2026 |
SECTION A U.S. Government ~ Tax Exempt Solicitation Information All quotes/responses shall be submitted via email to JaNae Lester at janae.a.lester.civ@us.navy.mil no later than Monday, November 9, 2026 @ 2:00 PM EST. Solicitation N0042127Q1022 is issued as an intent to sole source. The Government intends to purchase on a firm fixed-price basis, and to solicit and negotiate the proposed purchase order on a sole source basis with Surface Optics Corporation for SOC-410-DHR with Measurement Head, Command Module, Calibration Coupon, under the authority implemented by Federal Acquisition Regulation (FAR) by FAR Part 13.106-1(b). This procurement is a total set-aside for small business under the authority of FAR Part 52.219-6. This is a firm fixed-price procurement; therefore, the offeror’s intial offer should represent the vendor’s best quote in terms of price and technical acceptability. ***Basis for Award*** The Government intends to award this on a sole source basis. All interested parties MUST submit their capabilities and a quote no later than Monday, November 9, 2026 @ 2:00 PM EST. The Government will make a decision to consider other offers. ***Instructions to Offerors*** Please include the following information with your response: FOB: Shipping Cost: Cage Code: Small Business – Yes ___ No ___ Estimated Delivery Date: If available on a Pricelist please provide a copy. Government Point of Contact: JaNae Lester Naval Air Warfare Center AD (PAX) 21983 Bundy Road, BLDG 441 Patuxent River, MD 20670-1127 Email: janae.a.lester.civ@us.navy.mil | 42% | Combined Synopsis | 11/09/2026 |
40% | Solicitation | 12/11/2026 | |
Subject award was made as a result of corrective action taken in accordance with GAO protest file B-424837. | 40% | Awarded | Open |
Additional Details
Solicitation Number
N0042126Q1093
Archive Date
Apr 4, 2026
Office Address
PATUXENT RIVER, MD, 20670-1545