Notice ID: b68ea47a7bd7b609b98a11bafbf48c6aCombined Synopsis/Solicitation
83--913R - Royal Tents
Archived on October 8, 2010. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 7:00 AM UTC+02:00
- Posted
- September 21, 2010
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 314912: Classification Not Available
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVSUP FLT LOG CTR PEARL HARBOR
- PSC
- 83: TEXTILE/LEATHER/FUR; TENT; FLAG
- Last updated
- Dec 5, 2025
Identifiers
- Solicitation number
- N0060410T3093
- Notice ID
- b68ea47a7bd7b609b98a11bafbf48c6a
Description
This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (http://www.neco.navy.mil/). The RFQ number is N00604-10-T-3093. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-44 and DFARS Change Notice 20070913. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dfars/index.htm . The NAICS code is 314912 and the Small Business Standard is 500. The proposed contract is 100% set aside for small business concerns. The Fleet and Industrial Supply Center (FISC) Regional Contracting Department requests responses from qualified sources capable of providing: CLIN 0001, One hundred (100) each – 913R (9’ x 13’) – Royal Tent, 10.10 oz. Army Duck, flame retardant, sewn-in floor, zippered screen door (front), and screened rear door. CLIN 0002, One Lot (1) – Freight and Shipping Outbound to JPAC, Hickam AFB, HI 96853-5530. The Delivery Date is 20 OCTOBER 2010. The Delivery Location is 310 Worchester Avenue, Building 45, Hickam AFB, HI 96853-5530. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.212-1, Instructions to Offerors - Commercial Items; 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items including 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.225-13, Restriction on Foreign Purchase 52.232-36, Payment by Third Party 52.215-5, Facsimile Proposals Quoters are reminded to include a completed copy of 52.212-3 and its ALT I with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are: DFARS 252.212-7000, Offeror Representations and Certifications - Commercial Items; DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items including. 252.212-7000, Offeror Representations and Certifications - Commercial Items 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items including: 252.225-7001, Buy American Act & Balance of Payments 252.225-7036, Buy American Act-FTA-Balance of Payments 252.232-7003, Electronic Submission of Payment Requests 252.232-7010, Levies on Contract Payments 252.204-7004, Alt CCR Registration 5252.232-9402, Wide Area Work Flow This announcement will close at Thursday, 23 September 2010 on 1200 hours, Hawaii Standard Time. Contact Mr. Scot Griep who can be reached at 808-473-7546 or email scot.griep@navy.mil . A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency. Procedures in FAR 13.106 are applicable to this procurement. This final contract award will be based on a determination of responsibility/technically acceptable low quotes. For Brand Name or Equal procurements: The proposed contract action is for a brand name or equal product. The brand name, model number, and salient characteristics of the product(s) are: 913R (9’ x 13’) – Royal Tent, 10.10 oz. Army Duck, flame retardant, sewn-in floor, zippered screen door (front), and screened rear door. FAR 52.211-6 -- Brand Name or Equal is hereby incorporated by reference. Provide information required by FAR 52.211-6 when submitting offers for brand name or equal products. Central Contractor Registration (CCR). Quoters must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/ . All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Quotes over 10 pages in total will not be accepted by facsimile. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Scot Griep (808) 473-7546 Scot Griep Phone: (808) 473-7546 Email: scot.griep@navy.mil
Documents
No documents available.
Lifecycle
Solicitation:
N0060410T3093- Combined Synopsis
- 2×Combined SynopsisCurrentSep 21, 2010
83--913R - Royal Tents
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Update: Interested parties may request a site visit to determine if they have the capabilities to provide this service 1) Window of Availability We can support a visit during normal day shift. 2) Base Access & Clearance Requirements - Security Requirement will be provides upon request 3)Foreign National Restrictions Restricted, no foreign nationals. 4) Point of Contact (POC) - Will be provided prior to site visit 5) RSVP & Cut-Off Deadlines -Must submit request prior to the close of this opportunity 6)Technical Constraints & Safety Gear Safety shoes and long pants. No photography. The Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS) Contracting Office (Code 400) is issuing this sources sought. The sources sought is being issued as a means of conducting market research to identify industrial capabilities that might exist in order to support an upcoming requirement for a Wire Rope Replacement Services contract. For additional information regarding the technical specifications, please refer to the attached Performance Work Statement (PWS). Based on the responses to this sources sought, this requirement may be set-aside for small business (in full or in part) or procured through full and open competition (unrestricted), the Government intent at this time is for a single award. All small business set-aside categories will be considered. Telephonic inquiries will not be accepted or acknowledged, the Government will not be providing evaluations or comments to companies providing sources sought responses, but the responses will be used to inform the government as to the best means of procuring this requirement. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotes at this time, nor accepting unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (SAM.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Project Background This contract shall provide on-site wire rope replacement services for Puget Sound Naval Shipyard and Intermediate Maintenance Facility, in Bremerton, Washington. This is a service to replace wire rope on seven (7) canes located at Puget Sound Naval Shipyard Additional details are provided in the draft PWS attached to this announcement (Attachment 1). Instructions to Submit Interest: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the notional PWS attached to this notice and include answers to the attached Request for Information (RFI) (Attachment 2). Please limit your response to no more than 5 pages. Please e-mail this information to the Government contacts listed below, with "Wire Rope Replacement Sources Sought Response N4523A27RPSNS" in the subject field, by the closing date of this notice. Angela Charpia, Branch Manager ,angela.m.charpia.civ@us.navy.mil Amanpreet Johal, Contracting Officer, amanpreet.s.johal2.civ@us.navy.mil Any applicable brochures or company capability material may also be submitted. | - | Market Research | 11/17/2026 |
Amendment 0004 The purpose of this amendment is to extend the response time for this opportunity until November 3, 2026 at 1400 EST. Amendment 0003 The purpose of this amendment to is to provide the following response to Industry question: Question 1: Amendment 0002 confirms part number 7155408 and states that 7152800 is obsolete. If the manufacturer’s certificate of conformance, technical data, or test report identifies part 7155408 as “Robtec STS” rather than “Ocean STS,” will that documentation be acceptable provided it clearly identifies part 7155408 and demonstrates compliance with every stated technical requirement? Answer 1: Yes. The documentation will be acceptable provided it clearly identifies part # 7155408. Question 2: Because the required 3,000-meter continuous length must be newly manufactured, may an offeror submit representative manufacturer-certified test documentation and a written manufacturer commitment with its quotation, followed by the actual production-lot certificate of conformance and certified test report with delivery? Or must the quotation include certified results for the specific production lot that will be delivered? Answer 2: The offeror may submit representative manufacturer- certified test documentation and a written manufacturer commitment with its quotation followed by the actual production-lot certificate of conformance and certified test report. Question 3: Must proof-load testing cover the entire continuous 3,000-meter length, or is the manufacturer’s standard lot-based or sample-based proof-load testing acceptable? Please confirm the applicable proof-load or sampling requirement. Answer 3: The Manufacturer’s standard lot-based or sample-based proof-load testing is acceptable. Question 4: For this total small-business set-aside, may an eligible small-business reseller supply the specified Robline product, or must the offered product be manufactured by a qualifying small-business manufacturer? If a class or individual waiver applies, please identify it. Answer 4: Any eligible small-business reseller may supply the specified Robline product for this total small-business set-aside under the SAT. Amendment 0002 The purpose of this amendment is to extend the respose period for this opportunity and to provide the following responses to Industry questions. Question 1: The combined synopsis identifies “Robline (Ocean) STS” 8 mm rope as part 7155408. Robline’s published catalog lists 7152800 for the 8 mm Ocean STS (Dyneema) variant and 7155408 for the 8 mm Robtec STS (HMPE) variant; both show 9,430 daN breaking load and about 47 g/m linear density. Answer 1: The required part number is 7155408. The number listed below (7152800) is an old part number and is now obsolete. Question 2: Please confirm whether the required product is the Robtec STS 7155408 or Ocean STS 7152800, and which product name must appear on the manufacturer CoC and test reports. The notice also specifies elongation no greater than 0.19% at 94.3 kN, which is the stated breaking-strength threshold. Please confirm the intended test load and method for that elongation figure so we can obtain matching certified data. Answer 2: The specified elongation no greater than 0.19% at 94.3 kN corresponds to the ultimate breaking strength. Elongation is measured at the point of failure during a standard "pull to break" (destructive) test. The manufacturer's standard destructive testing method (measuring elongation at the ultimate breaking strength threshold) is fully acceptable to the Government. Amendment 0001 The purpose of this amendment to is to provide the following response to Industry question: Question 1: Please confirm the intended elongation test requirement and test load for Robline P/N 7155408. The solicitation states elongation ≤0.1% at 94.3 kN, while 94.3 kN is the published average breaking-load value. Please advise the acceptable manufacturer test method and documentation required for technical acceptability. Answer 1: As indicated in the RFQ, the elongation requirement is ≤0.19% at 94.3 kN (not ≤0.1% as stated in the question). See basis of award in this RFQ for technical acceptability criteria. This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Request for Quotation (RFQ) number is N66604-27-Q-0041. This requirement is being solicited as a 100% small business set-aside. The North American Industry Classification System (NAICS) Code for this acquisition is 314994 Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills. The Small Business Size Standard is 1,000 Employees. The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) requires procurement of the following brand name item, no substitutions permitted. Item Description Part # Qty. Quoted Unit Price (Offeror to Fill In) Quoted Extended Price (Offeror to Fill In) Robline (Ocean) STS 8mm diameter rope 7155408 1 spool/ 3000m $ $ This specific brand of rope is essential due to its unique performance characteristics, including high breaking strength, minimal elongation, and low shrinkage values, which are critical for the extreme ocean environments in which the equipment operates. Utilizing an alternative brand would alter physical tolerances, necessitating a costly and complex system redesign. Furthermore, this specific rope is required for critical engineering and qualification testing of deployment systems, making timely delivery essential to meet scheduled operational requirements. Delivery is F.O.B. Destination: InterOcean Systems, LLC, 9201 Isaac Street, Suite C, Santee, CA 92071 The Government’s required delivery is 16 weeks After Date of Contract (ADC) or sooner. Spool and Packaging The contractor shall: deliver 3,000 meters as a single, continuous, unspliced piece on one spool. No factory splices, mechanical joints, or knots are acceptable. The anchor line shall be wound on sturdy, weather-resistant reel/spool suitable for field deployment and long-term storage. The spool shall prevent tangling, hockling, kinks, and bird-nesting during payout and spooling. Core diameter shall comply with manufacturer bend radius recommendations for 8mm HMPE line. The spool shall be labeled with contract number, manufacturer lot/batch number, date of manufacture, fiber type, length, and nominal diameter. Offerors shall include shipping cost into the unit price in the table above. A separate line for shipping will not be provided. Quality Assurance, Inspection, and Verification: Certificate of Conformance (CoC) The vendor shall provide an official Manufacturer Certificate of Conformance (CoC) with the shipment certifying that: The delivered material is Robline Ocean STS 8mm. The product is newly manufactured (first-run production, not surplus or aged inventory). The lot has undergone factory proof-load testing and visual inspection. Test Data and Factory Acceptance Reports: The contractor shall provide certified test reports verifying Average Breaking Strength (≥94.3 kN), Safe Working Load (≥18.86 kN), elongation (≤0.19% at 94.3 kN), and linear density (47.2 g/m). The Government intends to award a single FFP purchase order to the eligible, responsible offeror whose quote is the lowest price technically acceptable. In order to be determined technically acceptable, the offeror shall: Quote brand name item, no substitutions allowed, in the required quantity; Submit technical data sheets or manufacturer cut-sheets with specs with its quote; and Submit verifiable QA and testing documentation with its quote. In accordance with DFARS 252.204-7024, the Government will consider SPRS risk assessments (including item, price, and supplier risk) during the evaluation of quotations. A high-risk rating or negative performance history in SPRS may demonstrate a high risk of unsuccessful performance and could result in the quote being excluded from consideration for award. In accordance with DFARS Clause 252.211-7003, the contractor shall provide a unique item identifier (UID) for all delivered items for which the Government’s unit acquisition cost is $5,000.00 or more. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Offerors shall include price, payment terms, delivery terms, and the following additional information with submissions: Offeror Point of Contact (including phone number and email address); Offeror CAGE Code; and Offeror SAM UEI. The Government’s method of payment will be electronic payment via Wide Area Workflow (WAWF). Incorporated provisions and clauses are those in effect through the latest Federal Acquisition Circular (FAC). Full text of incorporated FAR/DFARS clauses and provisions may be accessed electronically at https://acquisition.gov/far. The following FAR provisions and clauses apply to this solicitation: --FAR 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (Sep 2007) --FAR 52.204-13, System for Award Management Maintenance (Oct 2018). --FAR 52.204-19, Incorporation by Reference of Representations and Certifications --FAR 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) --FAR 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (Nov 2021). -- FAR 52.204-25 Prohibition on Contracting for Certain Telecommunication and Video Surveillance Services or Equipment (Nov 2021) --FAR 52.204-26, Covered Telecommunications Equipment or Services—Representation (Oct 2020) --FAR 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations—Representation (Nov 2015) --FAR 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015) --FAR 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016) --FAR 52.212-1 Instructions to Offerors—Commercial Items --FAR 52.212-2 Evaluation—Commercial Items --FAR 52.212-3 Offeror Representations and Certifications – Commercial Items (DEVIATION 2025-O0003) (DEVIATION 2025-O0004) --FAR 52.212-4 Terms and Conditions—Simplified Acquisitions (Commercial Products and Commercial Services) --FAR 52.232-39, Unenforceability of Unauthorized Obligations (JUN 2013) --FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (NOV 2021) --FAR 52.232-1, Payments (Apr 1984) --FAR 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) --FAR 52.252-1, Solicitation Provisions Incorporated by Reference (Feb 1998) In addition, the following Defense Federal Acquisition Regulations Supplement (DFARS) clauses and provisions apply to this order: --DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011) --DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (DEC 2022) --DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials (Sep 2022) --DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls (Oct 2016); --DFARS 252.204- 7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (Oct 2016); --DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (Dec 2019); --DFARS 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support (May 2016); --DFARS 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services (Jan 2021); --DFARS 252.211-7003, Item Unique Identification and Valuation (JAN 2023) --DFARS 252.204-7024, Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations Quotes shall be submitted electronically via email to Maria Diaz-Sotomayor at maria.d.diaz-sotomayor.civ@us.navy.mil and Teresa Michael at Teresa.m.michael2.civ@us.navy.mil Quotes and questions regarding this acquisition must be received on or before 03 November 2026 at 1400 Eastern Standard Time (EST). Quotes received after this date are late and may not be considered for award. | - | Combined Synopsis | 11/03/2026 |
| - | Solicitation | 12/23/2026 | |
| - | Solicitation | 12/23/2026 | |
| - | Solicitation | 12/23/2026 |
Additional Details
Solicitation Number
N0060410T3093
Archive Date
Oct 8, 2010