GovChime
Notice ID: 4a1f6d935583c00ee04acfe2c1009197Combined Synopsis/Solicitation

99--Container Canopies

Archived on October 24, 2018. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 AM UTC−05:00
Posted
September 19, 2018
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
339999: All Other Miscellaneous Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSUP FLT LOG CTR PEARL HARBOR
PSC
99: MISCELLANEOUS
Last updated
Sep 10, 2025

Identifiers

Solicitation number
N0060418Q4090
Notice ID
4a1f6d935583c00ee04acfe2c1009197

Description

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures for commercial items found at FAR 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (https://www.neco.navy.mil/). The RFQ number is N0060418Q4090. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-100 and DFARS Publication Notice 20180824. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/far/ and http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. The NAICS code is 33999 and the Small Business Standard is 500 Employees. The proposed contract is 100% set aside for small business concerns. The Small Business Office concurs with the set-aside decision. The NAVSUP FLC Pearl Harbor Regional Contracting Department requests responses from qualified sources capable of providing the supplies and customized equipment assembly for the below contract line items (CLINS). CLIN 0001: Container Cover Quantity: Four (4) Minimum Specifications: -Length-40 feet -Width-40 feet -Height-21 feet -Frame- 2 3/8� galvanized steel -Wind Rating-Up to 120 mph -UV Specification-AATC CLIN 0002: Container Cover Flap Quantity: Two (2) Minimum Specifications: -Overlaps container cover -Wind Rating-Up to 120 mph -UV Specification-AATC CLIN 0003: Container Cover End Flap Quantity: Four (4) Minimum Specifications: -Fabric end panel-40 feet -Frame-40 feet -Roll up fabric door- 12 feet x 12 feet CLIN 0004: Shipping Costs shall be FOB Destination to NAVSUP FLC Pearl Harbor, Ocean Terminals Code 430, 1942 Gaffney Street, Bldg. 9478, JBPHH, HI 96860-4549 The following attachments are applicable: Attachment 001 – FAR 52.212-3, with Alt 1 Provision Offerors are to complete Attachment 001 FAR 52.212-3, with Alt 1 Provision (if there are any changes). Failure to include these attachments with your quote as may result in your offer being deemed unresponsive. Procedures in FAR 13.106 are applicable to this procurement. The final contract award will be based on the Lowest Priced Technically Acceptable (LPTA) responsible offer. Offerors shall include in their quote all brand names and specifications, and their best lead time for shipping/delivery time for each line item. To be evaluated as technically acceptable the contractor shall (1) provide the quote and specifications as well as pricing for each CLIN. The Contracting Officer will rank offerors from lowest to highest price, and review the technical quotes of the three lowest priced offers, it those offers are rated technically acceptable, then award will be made without further evaluating quotes of the other offers. The following FAR provision and clauses are applicable to this procurement: 52.204-16 Commercial and Government Entity Code Reporting 52.204-18 CAGE Maintenance 52.212-1 (Dev) Instructions to Offerors 52.212-3, Alt 1 Offeror Reps and Certs 52.212-4 Contract Terms and Conditions-Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards 52.209-6 Protecting the government’s Interest When Subcontracting with contractors Debarred, Suspended, or Proposed for Debarment 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations 52.219-6 Notice of Total Small Business Set-Aside 52.219-28 Post Award Small Business Program Representation 52.222-3 Convict Labor 52.222-19 Child Labor – Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-36 Equal Opportunity for Workers with Disabilities 52.222-50 Combating Trafficking in Persons 52.223-18 Encouraging Contractor Policies to Ban text Messaging While Driving 52.232-33 Payment by Electronic Funds Transfer – System for Award Management 52.233-3 Protest After Award 52.233-4 Applicable Law for Breach of Contract Claim 52.232-40 Providing Accelerated Payments to Small Business Subcontractors 52.247-34 FOB Destination 52.252-1 Solicitation Provisions Incorporated by Reference This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. (End of Provision) 52.252-2 Clauses Incorporated by Reference This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. (End of Clause) Additional contract terms and conditions applicable to this procurement are: 252.203-7000 Requirements Relating to Compensation of Former DOD Officials 252.203-7005 Representation relating to Compensation of Former DoD Officials 252.204-7015 Disclosure of Information to Litigation Support Contractors 252.211-7003 Item Unique Identification and Valuation 252.213-7000 Notice to Prospective Suppliers on Use of PPIRS-SR in Past Performance Evaluations 252.223-7008 Prohibition of Hexavalent Chromium 252.225-7000 Buy American Act Balance of Payments Program Certificate Basic 252.225-7001 Buy American Act and Balance of Payments Program 252.232-7003 Electronic Submission of Payment Requests 252.232-7006 Wide Area Workflow Payment Instructions 252.232-7010 Levies on Contract Payments 252.244-7000 Subcontracts for Commercial Items 252.247-7023 Transportation of Supplies by Sea This announcement will close 1000 hours (10:00 AM) Hawaii Standard Time on Monday, 24 September 2018. Contact Lee Thomas who can be reached via email: lee.thomas1@navy.mil. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM). Quoters must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. All quotes shall include price(s), FOB point, a point of contact, name and phone number, and business size. Quote may be submitted via email to Lee Thomas at lee.thomas1@navy.mil. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. ******* End of Combined Synopsis/Solicitation ********

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N0060418Q4090
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentSep 18, 2018

    99--Container Canopies

    Notice 4a1f6d935583c00ee04acfe2c1009197 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format prescribed in Federal Acquisition Regulation (FAR) 12.603, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. This document serves as an addendum to FAR provision 52.212-1, Instructions to Offerors?Commercial Products and Commercial Services, which applies to this acquisition.Competitive quotations are being requested under Request for Quotation (RFQ) No. N66001-26-Q-6141. The applicable North American Industry Classification System (NAICS) code for this acquisition is 339999, All Other Miscellaneous Manufacturing, with a corresponding small business size standard of 550 employees. This acquisition is being conducted as a Total Small Business Set-Aside. Only quotations submitted by eligible small business concerns will be considered for award. Quotations submitted by entities other than small business concerns will not be considered.The Government requires the manufacture and delivery of picture frames and certificate/photo mats in support of the NIWC Pacific Awards Program. To be considered eligible for award, offerors shall submit pricing for all required items and quantities identified in this solicitation. Quotations that fail to include pricing for all required items and quantities may be determined non-responsive and may be excluded from consideration for award. Anticipated Contract Line Item Numbers (CLINs) are identified in Attachment 3, Pricing Worksheet.
-Combined Synopsis05/26/2026
REQUEST FOR INFORMATION / SOURCES SOUGHT NOTICE Notice Type: Sources Sought Title: Industrial Finishing Services for New Government-Furnished Millwork and Furniture (Portsmouth Naval Shipyard) Response Date: December 30, 2025, 5:00 PM EST Classification Codes: NAICS Code: 339999 - All Other Miscellaneous Manufacturing Product Service Code (PSC): J071 - Maintenance, Repair, and Rebuilding of Equipment: Furniture Contracting Office Address: Portsmouth Naval Shipyard, Kittery, ME Primary Point of Contact: Lisa Fielding Title: Contracting Officer Email Address: lisa.a.fielding.civ@us.navy.mil Phone Number: 207-438-1893 1.0 Description The Portsmouth Naval Shipyard is seeking information on sources capable of providing industrial finishing services for newly fabricated, Government-Furnished millwork, cabinet components, furniture, and related items. The purpose of this Request for Information (RFI) is to conduct market research to determine the availability and adequacy of potential business sources prior to determining the acquisition strategy and method of acquisition. This is not a solicitation, and a contract will not be awarded from this announcement. 2.0 Scope of Work The requirement is for a contractor to provide all necessary labor, materials, equipment, and facilities to apply a factory-grade finish to new, unfinished wood furniture and millwork. A more detailed description of the requirement is located in the attached Draft Statement of Work (SOW). All work shall be performed at the contractor's facility. 3.0 Urgency of Requirement The Government has an urgent need for these finishing services to complete critical projects. The finished items are required back at the shipyard as soon as possible. Responses to this RFI will help the Government understand realistic turnaround times within the industry. 4.0 Draft Statement of Work Attached to this RFI is a Draft Statement of Work (SOW) that describes the current anticipated requirement. This SOW is for market research and planning purposes only and is subject to change. The Government is not bound by the contents of this Draft SOW. All interested parties are encouraged to review the Draft SOW in its entirety before responding to this RFI. 5.0 Information Requested from Interested Parties Interested parties who believe they are capable of performing the services described are requested to respond to this RFI with a capabilities statement. Please limit your response to no more than seven (7) pages. Your response should, at a minimum, include the information requested in subsections 1 through 6 below. Company Information: Company Name, Address, Point of Contact (Name, Email, Phone), CAGE Code, and Unique Entity ID (UEI) from SAM.gov. Business Size and Socio-Economic Status: Identify your business size under NAICS code 339999 and specify any applicable socio-economic statuses (e.g., 8(a), HUBZone, SDVOSB, WOSB). Capability Narrative: A brief description of your company's experience with services of a similar scope and complexity, including at least two (2) examples of relevant past performance from the last three (3) years. Facilities and Equipment: A description of your facility and key equipment used for finishing. Estimated Turnaround Time: Based on the Draft SOW, provide an estimated turnaround time for a representative lot of furniture. Feedback on Draft SOW: Provide any feedback on the Draft SOW. Comments regarding clarity, technical feasibility, industry best practices, potential cost drivers, or unrealistic requirements are highly encouraged. 6.0 Questions Regarding this RFI Interested parties may submit questions concerning this RFI in writing via email to the Primary Point of Contact listed herein. The deadline for submission of all questions is 12/23/2025 at 5:00 PM EST. All questions will be answered in a formal Question & Answer (Q&A) document, which will be posted as an amendment to this notice on SAM.gov. Questions will be answered in a consolidated format and will not identify the source of the inquiry. The Government will not provide individual responses to questions. 7.0 Submission Instructions Please submit your capabilities statement via email to the Primary Point of Contact listed above no later than 5:00 PM EST on 12/30/2025. Please use the subject line: "Response to RFI - Furniture Finishing Services." 8.0 Disclaimer This RFI is issued solely for information and planning purposes and does not constitute a solicitation. A contract will not be awarded from this announcement. All information received in response to this RFI that is marked as proprietary will be handled as such. The Government shall not be liable for or suffer any consequential damages for any proprietary information not properly identified. Responding to this RFI is voluntary, and the Government will not pay for information or administrative costs incurred in response to this RFI. Attachment 1: Draft SOW
-Market Research12/30/2025
-AwardedOpen
Testing Testing
-Special Notice11/10/2026
see attached
-Solicitation12/02/2026

Additional Details

Solicitation Number

N0060418Q4090

Archive Date

Oct 24, 2018

Office Address

PEARL HARBOR, HI, 96860-4549