Stellar Implantable Transmitters
Archived on January 22, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM EST
- Posted
- December 29, 2025
- Notice type
- Special Notice
- Set-aside
- No Set aside used
- NAICS
- 334516: Analytical Laboratory Instrument Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVSUP.NAVSUP OTHER HCA.BUMED.NAVY MEDICINE WEST.NAVAL MEDICAL RESEARCH CENTER
- Place of performance
- Wright Patterson AFB, Ohio, 45433
- Last updated
- Nov 4, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N3239826Q8631
- Notice ID
- 5000c0fe77a544d195d9afdc11c55976
Description
The United States Department of the Naval Medical Research Command (NMRC) intends to award a sole source contract to, TSE Systems, Inc. in Huntley, IL. This requirement is for authorized approved vendors to provide brand name equipment. This notice is not a request for competitive proposals however If interested Government shall consider all responses.
The Naval Medical Research Unit - Dayton (NAMRU-D) has a requirement for Stellar Implantable Transmitters, Type PTA-M: Pressure, Temp, Activity. These devices must be compatible with a TSE stellar telemetry receiver (already owned), appropriate size for implantation into a rat model, able to sample blood pressure (Range -25 to 300 mmHg) at >500 Hz, temperature measurements from 0-45C (0.05C resolution), measure overall animal activity, and have a battery life allowing data collection for > 3 months (up to 12 months). The NAICS code for this action is 334516. This requirement will be procured under the guidelines of FAR Part 12 Commercial Items.
NMRC requires that all contractors doing business with the Acquisition Office must be registered with the Systems for Award Management (SAM). No award can be made unless the vendor is registered in Systems for Award Management. For additional information and to register in SAM, please access the following website: https://www.sam.gov/. In order to register with the SAM and to be eligible to receive an award from this Acquisition Office, all offers must have a Unique Entity Identification Number (UEI). A Sam.gov number may be acquired free of charge by contacting Sam.gov online at www.sam.gov or by phone at (866) 606-8220.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (1)
- Download
4.2 Sole Source Justification Form-TSE Systems KO signed 12.23.25.pdf
521 KBAdded in Special Notice version 3Posted
Lifecycle
- 3Version 3Special NoticeArchivedCurrent
Stellar Implantable Transmitters
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Notice of Intent to Sole-Source Requirement The Department of Veterans Affairs, Network Contracting Office (NCO) 10, intends to negotiate a sole source contract under Simplified Acquisition Procedures and the authority of FAR 6.302-1, Only one responsible source and no other supplies or services will satisfy agency requirements. The associated NAICS code for this is 334516, Size Standard is 1,000 employees. Product Service Code (PSC) is Q301. The sole-source contract will be awarded to: VERACYTE, INC UEI: JS7GBP6LCMN6 Description of equipment requirements: The VA Northeast Ohio Healthcare System (VANEOHS) requires continued access to specialized genomic classifier testing used to assess risk of metastasis or metastatic progression in patients with localized or advanced prostate cancer. Decipher prostate testing is a powerful diagnostic and prognostic tool that assesses risk of prostate cancer progression within the next five years post detection, biopsy or surgical removal. The test utilizes a genome-wide transcriptome assay to analyze the expression of 22 genes to generate the Decipher score. Performed on existing tissue samples obtained during biopsy or surgical removal of the prostate, prior to any radiation or hormone therapy. Indicated in localized, N1, or metastatic disease. Provides the Decipher score based on genomic characteristics of the tumor, independent of clinical and pathological factors. The score, ranging between 0 and 1, reflects tumor aggressiveness. It is the Government's belief that only the proposed candidate possesses the required capabilities to successfully meet this requirement. It is the Government's intention to solicit and negotiate with only this source. This notice of intent is not a request for competitive proposals. IAW FAR 5.207 all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. This is not a solicitation or request for offers. No solicitation package is available. Any response to this notice must show clear and convincing evidence that demonstrates the ability to comply with the requirement and that competition would be advantageous to the Government. The Government will not pay for information submitted. A determination not to compete based on responses to this notice is solely within the discretion of the Government. All responses to this intent to sole source must be emailed to Thomas Bellamy: thomas.bellamy@va.gov & Samantha Jarrett: samantha.jarrett@va.gov by 4:00 p.m. EST November 12th, 2026. | - | Special Notice | 11/12/2026 |
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio is seeking capabilities packages of potential sources including Small Businesses (SB). This sources sought synopsis is published for market research purposes only, to identify potential sources capable of delivering a Nano-Aerosol Analyzer with the capabilities described herein for the Air Force Institute of Technology, located at Wright Patterson Air Force Base, Ohio (WPAFB). The Government is seeking capabilities packages from all potential sources, including but not limited to: small business (SB), 8(a) participants, HUBZone Small Business, Economically Disadvantaged Women-Owned Small Business (EDWOSB), Women-Owned Small Business (WOSB), Small Disadvantaged Business (SDB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). Firms that respond shall review the attached instructions and technical requirements and submit responses that: Specify that offered products meet the specifications provided below; and Provide detailed information to show clear technical compliance. THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES. All interested firms shall submit a response to the Primary Points of Contact, Ms. Claire Hess at claire.hess@us.af.mil and Ms. Jessica Stamper at jessica.stamper.2@us.af.mil, demonstrating their capability to provide a Nano-Aerosol Analyzer. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. A solicitation for this requirement does not exist, therefore, do not request a copy of the solicitation. The decision to solicit for a contract will be solely within the Government's discretion. The North American Industry Classification System (NAICS) code assigned to this acquisition is 334516 (Analytical Laboratory Instrument Manufacturing) with a small business-size standard of 1,000 employees. Firms responding should indicate socio-economic status (8(a) with Graduation Date, SDVOSB, EDWOSB, WOSB, small business, and/or HUBZone). All respondents may identify potential small-business sources for components, accessories, installation, training, maintenance, or other support associated with the requirement. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a Department of Defense (DoD) contract. A small business set-aside decision has not yet been made. Identify whether your firm is the manufacturer of the proposed end item or an authorized distributor/reseller. If not the manufacturer, identify the proposed manufacturer, its business size, and the country of origin of the proposed end item.” Any information submitted by respondents to this Sources Sought is voluntary. This Sources Sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any Government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business or any particular small business program. CAPABILITIES PACKAGE: All interested firms shall submit a capabilities package to provide the Nano-Aerosol Analyzer that explicitly demonstrates their capability to provide the required product. The capabilities package should be brief and concise yet clearly demonstrate an ability to meet the stated requirements. However, the response must not exceed five (5) pages. Capabilities Packages submitted in response to this sources sought synopsis must be received at the following e-mail addresses NO LATER THAN 17 NOVEMBER 2026 AT 3:00 PM EASTERN TIME. All correspondence sent via email shall contain a subject line that reads: Nano-Aerosol Analyzer. If this subject line is not included, the email may not get through email filters at WPAFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachments. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xlsx or .xls documents are attached to your email. All other attachments may be deleted. Responses shall be submitted via email to the following addresses: claire.hess@us.af.mil and jessica.stamper.2@us.af.mil Please direct all questions concerning this acquisition to Ms. Claire Hess at claire.hess@us.af.mil and include the necessary subject line indicated above. Attachments: Instructions Statement of Work | - | Market Research | 11/17/2026 |
Value Proposition: ThermaSpin, developed by scientists at Los Alamos National Laboratory, provides a reliable, cost-effective way to measure the flow behavior (viscosity) of extremely hot and reactive liquids, such as molten salts and metals, under realistic operating conditions. Unlike existing solutions that are expensive, complex or poorly suited for low-viscosity fluids, this enclosed high-temperature viscometer delivers high sensitivity, small sample requirements and precise atmospheric control, enabling accurate measurements without exposing materials to air or contamination. This capability is critical for industries such as advanced nuclear energy, thermal energy storage and high-temperature materials processing, where fluid properties directly impact system performance, safety and design. By making these measurements more accessible and practical, the ThermaSpin High-Temperature Viscometer reduces development risk, lowers testing costs and accelerates innovation in next-generation energy and industrial systems. The Challenge: Accurately measuring the viscosity of molten salts and other high-temperature liquids is extremely difficult because these materials exist under harsh conditions—temperatures approaching 1,000°C, high chemical reactivity and sensitivity to air and moisture. Traditional measurement techniques often lack the sensitivity needed for these low-viscosity fluids or require specialized, resource-intensive methods that are not widely accessible. In addition, many approaches demand large sample volumes, which can be impractical or hazardous when working with corrosive or toxic materials. Maintaining a controlled environment during testing further complicates measurements, as even minor contamination can alter results. Together, these challenges create a significant barrier to obtaining reliable data on fluid behavior in systems where precise performance understanding is essential. Problems Solved: ThermaSpin High-Temperature Viscometer addresses these challenges by providing a sealed, high-temperature measurement system that can operate reliably in extreme environments while maintaining strict control over sample purity. Its rotational design, coupled with a highly sensitive torsion-based measurement approach, enables accurate detection of the very low forces associated with low-viscosity molten fluids—something conventional instruments struggle to achieve. The enclosed architecture allows operation under inert or controlled atmospheres, preventing contamination from air or moisture, while also supporting smaller sample sizes to reduce risk and material constraints. By integrating temperature resilience, corrosion compatibility and precise mechanical measurement into a single platform, ThermaSpin overcomes the key technical and practical limitations that have historically restricted viscosity characterization in these demanding conditions. Key Advantages: Extreme temperature capability (~1000°C): Reliable operation for molten salts, metals and other high-temperature fluids High sensitivity for low-viscosity liquids: Accurately captures subtle flow behavior that conventional viscometers miss Sealed, controlled environment: Maintains sample purity by preventing exposure to air and moisture Handles corrosive and hazardous materials: Durable design compatible with chemically aggressive substances and smaller sample sizes No specialized infrastructure required: Eliminates dependence on costly, limited-access techniques like neutron imaging Versatile and integration-ready: Adaptable to multiple applications and compatible with inert atmosphere systems (e.g., glove boxes) Market Applications: Advanced Nuclear Energy: Molten salt reactors (MSRs), fusion systems and fuel cycle development Thermal Energy Storage & CSP: High-temperature heat transfer and storage fluids for renewable energy systems Metallurgy & Metal Processing: Molten metal monitoring in refining, casting and advanced manufacturing Chemical Processing: High-temperature and corrosive fluid handling in industrial chemical production Research & Development: National labs, academia and industry studying thermophysical properties of extreme-condition materials Defense & Government Applications: Controlled characterization of hazardous or sensitive molten materials in secure environments Development Status: TRL 3 US Patent pending LA-UR-26-26227 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 04/01/2027 |
Sources Sought Notice Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: INTRODUCTION: The AFLCMC Operational Contracting Branch at Wright-Patterson AFB, Ohio, on behalf of the Air Force Institute of Technology (AFIT), is conducting market research through a Sources Sought Notice to identify potential sources, including Small Businesses (SB), capable of providing a High-Precision Wavemeter. This notice is to determine the availability of qualified sources to support this requirement. A set-aside decision has not yet been made for this acquisition. REQUIREMENTS: The Government requires a contractor to provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform High-Precision Wavemeter measurements and required data for physics research at the AFIT, Wright-Patterson Air Force Base, Ohio. The requirements are listed in the attached Statement of Work. SUBMISSION DETAILS: Interested parties are requested to submit a capability package that provides clear and convincing evidence of their ability to provide the services outlined above. In addition, interested parties must provide the following information: Company Name, Address, CAGE Code, and Unique Entity ID (UEI). Point of Contact (Name, Phone Number, and Email Address). Company/Business size status under a relevant NAICS code 334516. Prospective contractors must be registered in the System for Award Management (SAM) database at https://www.sam.gov to be eligible for a Department of Defense contract award. CLOSING: Responses to this Sources Sought notice must be submitted via email no later than November 12, 2026, at 11:00am Eastern Time. All correspondence sent via email must contain the subject line: “FA860127Q0020, Sources Sought: “High-Precision Wavemeter” Be advised that due to network filters, attachments ending in .zip or .exe are not allowable and will be deleted. The points of contact for this action are Brian Algeo, Contract Specialist, at brian.algeo.1@us.af.mil, and Candice Snow, Contracting Officer, at candice.snow@us.af.mil. Cybersecurity Maturity Model Certification: In accordance with R-DFARS 252.204-7021 and R-DFARS 252.204-7025, a CMMC Level 1 assessment is a mandatory requirement for all offerors bidding with the Department of War. Under CMMC Level 1, all offerors must demonstrate full compliance by self-certifying with the 15 basic safeguarding requirements for Federal Contract Information (FCI) outlined in RFO 52.240-93(b)(1). Once your organization has confirmed its compliance with these 15 requirements, you must enter this self-certification into the Supplier Performance Risk System (SPRS) module within PIEE (https://piee.eb.mil). This serves as the official record of your certification for the Government. Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record.” This is a Sources Sought notice for market research purposes only. In accordance with Revolutionary FAR Overall (RFO) 15.101, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary and will not be reimbursed by the Government. The Government’s assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside. Attachments: Instructions Statement of Work | - | Market Research | 11/12/2026 |
Non-Invasive Ultrasonic Coating Evaluation for Electrochemical Systems Makers of fuel cells, electrolyzers and other electrochemical devices depend on catalyst coatings applied with tight consistency; yet, today’s inspection tools force production to pause so samples can be pulled and studied in a laboratory. SonicCoat, developed by researchers at Los Alamos National Laboratory, offers a faster path: A gentle ultrasonic probe reads how much catalyst has been laid down while the coating line keeps running, giving producers real-time confidence in every layer without slowing throughput or harming the part. The payoff is higher yield, more uniform device performance and lower material cost across a platform that reaches from clean-energy hardware to batteries, solar films and semiconductors. How it Works The SonicCoat method rests on a simple physical fact: Sound travels through an object differently as the object’s makeup changes. A small transducer sends acoustic waves through a coated part and listens for the natural tones, or resonances, that the material rings back. As the catalyst is sprayed onto the surface layer by layer, those resonant tones shift in pitch and loudness in step with how much material has been added, so the acoustic signature becomes a fingerprint of coating thickness and uniformity. Because the reading is taken by sound rather than by scraping, cutting or exposing the part to X-rays, the inspection happens in place and in seconds, and the part continues down the line unharmed. Technology Description SonicCoat applies Acoustic Resonance Spectroscopy (ARS) to the quality control of catalyst-coated gas diffusion layers, the porous electrodes at the heart of fuel cells and electrolyzers. A coated sample is held in fixturing fitted with transducers that excite it across a broad frequency band and record its resonant response, first as a baseline on the bare substrate and then after each successive catalyst layer. Comparing each response against the baseline reveals how the resonance peaks migrate and change in amplitude, and those movements track the amount of platinum catalyst deposited. Testing has shown peaks moving roughly in proportion to added catalyst content, which demonstrates enough sensitivity to distinguish layer-by-layer differences in loading. Because the measurement is non-destructive and adds little time to the coating cycle, the approach fits directly into continuous production rather than diverting samples for laboratory analysis by scanning electron microscopy, energy dispersive X-ray spectroscopy or X-ray fluorescence, the after-the-fact methods relied on today. Catalyst loading is a primary driver of both cost and performance in electrochemical devices, so verified, consistent deposition translates into steadier power output, longer service life and less wasted precious metal. The same principle extends to any process where a thin coating must be monitored on a substrate, and the technique suits scale-up because it neither caps throughput nor limits the number of parts that can be checked. Advantages Inspects coatings in place while the line keeps moving, with no need to stop and pull samples Fully non-destructive, so parts are never cut, scraped or exposed to X-rays Reads catalyst buildup layer by layer for tight, repeatable quality control Relies on simple, low-cost ultrasonic hardware instead of large laboratory instruments Protects costly materials such as platinum by catching over-coating or under-coating early Scales to high-volume production without limiting output Market Applications Fuel Cell and Electrolyzer Manufacturing Battery Manufacturing Solar Energy Semiconductor Fabrication Protective Coatings TRL 4 U.S. Patent pending LA-UR-26-28073 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | - | Special Notice | 12/11/2026 |
Additional Details
Solicitation Number
N3239826Q8631
Archive Date
Jan 22, 2026
Office Address
SILVER SPRING, MD, 20910-7500