GovChime
Notice ID: 590107c0125c43fb99c5f00ed0f25f9aCombined Synopsis/Solicitation

45WB Regular Boat Overhaul

Archived on April 27, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−04:00
Posted
June 14, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
336611: Ship Building and Repairing
Agency
Department of WarDepartment of the Navy

Notice details

Office
PORTSMOUTH NAVAL SHIPYARD GF
Place of performance
Kittery, ME, 03904
Last updated
Dec 4, 2025

Identifiers

Solicitation number
N3904024R0003
Notice ID
590107c0125c43fb99c5f00ed0f25f9a

Description

***UPDATE 2/22/24: DD1449 SOLICITATION DOCUMENT HAS BEEN AMENDED. A MANDATORY SITE VISIT IS NOW REQUIRED PER THE UPDATED TERMS OF L-237-W001 (PREBID/PREPROPOSAL SITE VISIT). PLEASE REFER TO THE NEW DD1449 DOCUMENT ENTITLED N3904024R0003 SOLICITATION DD1449_AMENDMENT 1 THAT REPLACES THE ORIGINAL DD1449. IMPORTANT NOTES: - Potential Vendors will not automatically receive amendments to this solicitation and must check the SAM.gov website periodically to obtain any amendments or Q&A. At a minimum, it is recommended that Vendors check on a weekly basis. - Availability of Government Documents: The Performance Work Statement (PWS) is controlled and may only be made available upon request. Vendors must either submit or have on file a current DD 2345 in order to receive controlled information. Requests for additional or controlled information should be directed to Hillary Kang-Parker at hillary.s.kang-parker.civ@us.navy.mil. *************************************************************************** This is a COMBINED SYNOPSIS/SOLICITATION for commercial services, prepared in accordance with the information in FAR Part 12 and FAR Part 13.5, using Simplified Acquisition Procedures, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. Paper copies of this solicitation will not be available. This combined synopsis/solicitation SHALL be posted on SAM.gov. The Request for Quotation (RFQ) number is N3904024R0003. This solicitation documents and incorporates provisions and clauses in effect through FAC 2023-05 and DFARS Publication Notice 20240215. It is the responsibility of the Contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/browse/index/far https://www.acquisition.gov/dfars http://www.acq.osd.mil/dpap/dars/change_notices.html This is a 100% Small Business Set-Aside acquisition. The NAICS code is 336611 and the Small Business Standard is 1,300 employees. *************************************************************************** The Portsmouth Naval Shipyard is seeking proposals from sources capable of providing the following: 0001 Work Item 077-01-001. Hazardous Waste Produced on Naval Vessels; Control. To be performed in accordance with Attachment 1 - PWS Specifications 0002 Work Item 110-11-001. Underwater Hull and Freeboard; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0003 Work Item 123-11-001. Fuel Oil Tank; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0004 Work Item 123-14-001. Potable Water Tank; Inspect and Preserve. To be performed in accordance with Attachment 1 - PWS Specifications. 0005 Work Item 130-11-001. Main Deck Plating; Inspect. To be performed in accordance with Attachment 1 - PWS Specifications. 0006 Work Item 167-11-001. Watertight Door; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0007 Work Item 233-11-001. Diesel Engine Kim Hot Start Tank Heater; Install. To be performed in accordance with Attachment 1 - PWS Specifications. 0008 Work Item 243-11-001. Propeller Shafting; Remove, Inspect and Install. To be performed in accordance with Attachment 1 - PWS Specifications. 0009 Work Item 245-11-001. WB45 Propeller; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0010 Work Item 251-11-001. Main Engine Air Filter and Housing; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0011 Work Item 256-11-001. Main Engine Seawater Piping, Valve and Strainer; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0012 Work Item 259-11-001. Engine Exhaust System; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0013 Work Item 261-11-001. Fast Lube Oil Change (FLOC) System; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0014 Work Item 320-11-001. Electrical System; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0015 Work Item 332-11-001. Lighting Fixture Upgrade; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. 0016 Work Item 416-11-001. Fire Monitor System; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0017 Work Item 428-11-001. Navigation and Communication System; Install. To be performed in accordance with Attachment 1 - PWS Specifications. 0018 Work Item 438-11-001. Main Engine Wiring Harness; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0019 Work Item 512-11-001. Heating, Ventilation and Air Conditioning (HVAC) System and Control; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0020 Work Item 512-11-002. Cabin Fan; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0021 Work Item 521-11-001. Fire Pump Drive System; Repair and Align. To be performed in accordance with Attachment 1 - PWS Specifications. 0022 Work Item 561-11-001. Hydraulic System; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0023 Work Item 562-11-001. Port and Starboard Rudder; Inspect and Repair. To be performed in accordance with Attachment 1 - PWS Specifications. 0024 Work Item 611-11-001. Rubber Fender System Modification; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. 0025 Work Item 631-11-001. Interior Preservation; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. 0026 Work Item 631-31-001. Underwater Hull and Freeboard Preservation; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. 0027 Work Item 633-11-001. Hull Cathodic Protection Sacrificial Anode; Replace. To be performed in accordance with Attachment 1 - PWS Specifications. 0028 Work Item 634-21-001. Exterior Nonskid and Deck Preservation; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. 0029 Work Item 992-11-001. WB 45 Towing Service; Provide. To be performed in accordance with Attachment 1 - PWS Specifications. 0030 Work Item 992-11-002. Temporary Service; Provide. To be performed in accordance with Attachment 1 - PWS Specifications. 0031 Work Item 992-31-001. Cleaning and Pumping; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. 0032 Work Item 997-11-001. Drydocking and Undocking; Accomplish. To be performed in accordance with Attachment 1 - PWS Specifications. See the attached DD1449 Commercial Solicitation and Attachments for work item details. Place of Performance: Contractor's facility. Delivery and Pickup from Portsmouth Naval Shipyard, Kittery, ME. Anticipated Period of Performance: Six (6) months from 30 June 2024 through 31 January. **************************************************************************** SUBMISSION INSTRUCTIONS: Submit your Companys quote in writing and via email. Contact Contract Specialist Hillary Kang-Parker at hillary.s.kang-parker.civ@us.navy.mil or 207-438-6883. We must receive your quote by the deadline specified in Block 8 on Page 1. The Government may not consider any quote that we receive after the deadline unless we receive it before we issue a purchase order and considering it will not delay our purchase. The Government may also chose to accept late quotes if it determines it is in the best interest to do so. TERMS AND CONDITIONS OF YOUR QUOTE: Your quote must be based on the terms of this DD1449 Solicitation. We may reject any quote that is not based on these terms in their entirety. Your quote must contain all of the information described below. In order to submit a quote, you must know whether your company is a small business. The small business size standard that applies to this purchase is stated in Block 10 of the cover sheet of this solicitation, along with the North American Industry Classification System (NAICS) code on which it is based. Regardless of the information in Block 10, the small business size standard is 500 employees if you are submitting your quote in your own name but intend to provide a product that you did not manufacture yourself. Your quote should contain your best terms. The Contracting Officer may reject any or all quotes. After the evaluation of quotes, the Contracting Officer may negotiate final terms with one or more quoters of the Governments choice before issuing a contract. The Contracting Officer will not negotiate with any quoters other than those that submit complete solicitation packages and will not be using the formal source selection procedures described in FAR Part 15. Submission of offers: Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show-- The solicitation number; The time specified in the solicitation for receipt of offers; The name, address, and telephone number of the offeror; A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; Terms of any express warranty; Price and any discount terms; "Remit to" address, if different than mailing address; A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); Acknowledgment of Solicitation Amendments; Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with al terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. *********************************************************************** System for Award Management (SAM). Unless exempted by the Contracting Officer, you must register in SAM.gov before we will issue a purchase order to you. If you do not register by the date set by the Contracting Officer, the Contracting Officer may issue the order to a different Offeror. Once registered, you must remain registered throughout performance until final payment. Please visit www.acquisition.gov for information on SAM.gov registration and annual confirmation. Availability of Government Documents: The Performance Work Statement (PWS) is controlled and may only be made available upon request. Vendors must either submit or have on file a current DD 2345 in order to receive controlled information. Requests for additional or controlled information should be directed to Hillary Kang-Parker at hillary.s.kang-parker.civ@us.navy.mil or 207-438-6883. Vendors shall respond to all requirements of the solicitation document. Vendors are cautioned not to alter the solicitation. Initial quotes and any modifications thereto are to be submitted to the Contracting Office on or before the closing dated time cited elsewhere in this solicitation. Responses shall be submitted via email only. Please review all specifications carefully and make note of all base access requirements. ************************************************************************* CONTENT OF QUOTE: 1. A complete and signed Standard Form 1449, Request for Quotations. 2. Acknowledgement of solicitation amendments (if not previously acknowledged). 3. A point of contact, email address, phone number, CAGE code. 4. Technical Submission as noted below. 5. Past Performance Submission as noted below. 6. Pricing Information Submission as noted below. Factor 1 Technical Submission: Vendors shall demonstrate their technical capability by submission of technical information demonstrating compliance with the specifications, including, but not limited to: Work Plan to Meet Period of Performance & all requirements of this solicitation. The details of any/all exceptions taken to the specification. Factor 2 Past Performance: To facilitate the evaluation of this factor, the Vendor shall provide no more than three (3) projects or contracts that demonstrate recent and relevant Past Performance with the major tasks identified within the PWS. The Government will only evaluate projects or contracts that have already been performed. For each contract or project, Vendors shall provide the following: (i) customers name, organization and contact information; (ii) contract or project number and title; (iii) dates of performance (identify the start and end dates using months and years); (iv) the dollar value of the work performed; (v) a description of the work performed and how it is relevant to the PWS; (vi) whether the prior project was performed as the prime contractor or subcontractor, (vii) any negative comments or assessments regarding compliance with safety measures, and (viii) copies of any Contract Performance Assessment Reports or similar assessments, if available. Past Performance submission to include: Past Performance Information Form (attached to this solicitation) Past Performance Report Form (attached to this solicitation) INSTRUCTIONS FOR SUBMITTING PAST PERFORMANCE: These forms shall be sent with the completed SF1449 on or before the due date of this solicitation to Hillary Kang-Parker, Contracting Division, Code 410, Portsmouth Naval Shipyard, Kittery, ME 03904, email: hillary.s.kang-parker.civ@us.navy.mil. The Government reserves the right to contact references for verification or additional information. Factor 3 - Pricing Information: Pricing submission to include: Please provide your companys best pricing terms on each applicable line item. Price quotes shall be held firm for ninety (90) days. The Contracting Officer may issue a purchase order to other than the Offeror with the lowest price. COMMUNICATION WITH PORTSMOUTH NAVAL SHIPYARD (PNSY): Solicitation information and amendments will be made available through the internet via Government Point of Entry (GPE) SAM.gov. SAM.gov lists business opportunities for several naval activities including Portsmouth Naval Shipyard. Solicitations issued by the Shipyard can be found under command/site N39040. The cognizant PNSY Contract Specialist can be contacted at the following email address: hillary.s.kang-parker.civ@us.navy.mil PNSY will make the solicitation and amendments available electronically on the internet. Submissions in response to this solicitation N3904024R0003 SHALL be accepted via electronic transmission. Only quotations with signatures submitted in accordance with 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL of this combined synopsis/solicitation shall be accepted. ********************************************************************** I. Evaluation Factors, Relative Importance, Basis for Award. Factor 1, Technical Acceptability; Factor 2, Past Performance, and Factor 3, Pricing Information. The Government intends to solicit, evaluate and award a contract resulting from this solicitation using the policies and procedures in FAR Part 12 and FAR Part 13.5. The Vendor must address the specifications in sufficient detail so that the Government can reasonably determine that the Vendor possesses the ability to successfully perform the contract. Offers that simply state they are in compliance may be considered Unacceptable. Submissions shall be evaluated in accordance with the factors described below. The evaluation factors represent key areas of importance to be considered in the source selection decision. The factors and associated elements have been chosen to support meaningful discrimination between and among competing proposals. As demonstrated in their submissions, Vendors shall be evaluated in terms of their ability to meet or exceed the requirements in the Performance Work Statement (PWS). The Vendors quotation shall demonstrate a clear understanding of the nature and scope of the work specified in the PWS. Failure to provide a complete quotation shall reflect a lack of capability to perform the work requirements and may result in a determination that the Vendors quotation is unacceptable. Quotations received for less than the entire requirement will not be eligible for award. Vendors receiving a rating of Unacceptable for any non-price factor may not be considered for an award and may not be further evaluated. The Government intends to evaluate proposals and award contracts without discussions. If discussions are held, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition. NOTE: Awards will only be made to an Offeror that has no Organizational Conflict of Interest (OCI) as defined in FAR 9.5 or that the Government determines has provided a satisfactory mitigation plan. Offerors are advised that technical proposals may be evaluated without consideration of any proposed subcontractor which is deemed to have an OCI and for which an unsatisfactory mitigation plan has been proposed. II. Evaluation Methodology. Factor 1, Technical Submission: Factor 1 is rated at the factor level; the individual elements are not individually rated, but are assessed together to arrive at the overall rating for this factor. Element 1: Technical: The Government will evaluate whether the Vendor has submitted a technical capability plan that addresses the requirements in the Addendum to 52.212-1 in a clear and concise manner and that provides reasonable assurances that the Vendors plan will ensure its performance (and the performance of any subcontractors) conforms to the requirements of this contract. Element 2: Experience: The Government will evaluate whether the Vendor has clearly demonstrated that it has recent and relevant experience with the tasks identified in the PWS. Adjectival Rating Descriptions. The Technical Capability factor will be rated using the adjectival definitions, Acceptable and Unacceptable. The individual elements will not be rated, but the Governments evaluation of the elements, individually or collectively, will affect whether a quotation is rated Acceptable or Unacceptable. Factor 2, Past Performance: The Government will evaluate Past Performance of Vendors and any proposed subcontractors, teaming/joint venture partners or affiliates (hereafter, Contractor or Vendor) to determine how well the Contractor performed on the referenced contracts and to assess the Vendors probability of performing the solicitations requirements. The Government will use information that is recent and relevant to determine how well the Contractor performed on the referenced contracts in the following areas: (1) Recency: To be recent, the effort must have been performed during the past five (5) years from the date of issuance of this solicitation. The Vendor shall provide information on no more than three (3) previous contracts whose effort was relevant to the effort required by this solicitation. Evaluation will focus only on work experience already performed. Yet-to be performed work and experience prior to the last five (5) years will not be considered. The Government may verify past performance information. Information that fails to meet this condition or that has yet to be performed will not be evaluated. (2) Relevancy: To be relevant, the effort must be the same as or similar in scope, magnitude and complexity to the services being procured under this solicitation. More relevant past performance will typically be a stronger predictor of future success and have more influence on the past performance confidence assessment than past performance of lesser relevance. For the Vendors past performance submission(s), the agency will first evaluate the Vendors past performance to determine how relevant a recent effort accomplished by the Vendor is to the effort to be acquired. In establishing what is relevant for this acquisition, consideration has been given to those aspects of a Vendors contract history that give the greatest ability to measure whether the Vendor will satisfy the current procurement. Evaluation aspects of relevancy will include similarity of scope and magnitude which are defined below: Scope: Measures experience in the areas defined within the PWS. Prior projects or contracts are considered similar if they demonstrate that the Vendor has performed projects involving the major tasks identified within the PWS. Magnitude: Measures similarity of the dollar values between the prior contract or project and the projected value of the future contract. NOTE: Vendors are advised that the Government may consider past performance information obtained from sources other than those identified by the Vendor, including federal, state and local Government agencies, better business bureaus, published media and electronic databases including, but not limited to, Supplier Performance Risk System (SPRS) and Contractor Performance Assessment reporting System (CPARS). The Government may research Vendor performance on any federal, state, local and commercial procurement that is known to the Government, but not included on a submitted reference. Confidence Assessment: This aspect of the past performance evaluation is to determine how well the Contractor performed on past contracts. The Past Performance Confidence Assessment is an evaluation of the likelihood (or Governments confidence that the Vendor will successfully perform the solicitations requirements). Past Performance information that is not recent or relevant is not considered in the assessment of Past Performance Confidence. Please refer to the DD1449 for a description of the Past Performance Confidence Assessment adjectival ratings. NOTE: In the case of a Vendor without a record of relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the Vendor may not be evaluated favorably on past performance (see FAR 15.305(a)(2)(iv)). Therefore, the Vendor shall be determined to have unknown (or Neutral ) past performance. In the context of acceptability/unacceptability, aneutral rating shall be considered acceptable. This evaluation and rating is separate and distinct from the Contracting Officers responsibility determination. The assessment of the Vendors past performance will be used as a means of evaluating the relative capability of the Vendor and other competitors to successfully meet the requirements of the solicitation. Factor 3, Pricing Information: The Price Factor will not be scored or rated. The Vendors response will be evaluated for compliance with the Addendum to 52.212-1, completeness and price reasonableness in accordance with FAR 13.106-3. Selection: The Government will determine Vendors Total Overall Evaluated price, for this source selection, by aggregating the total price for all overhaul tasks, all specified repair tasks, and all transportation costs for the period of performance. The Government intends to evaluate quotations and issue an award using the procedures of FAR Part 13.5, Simplified Procedures for Certain Commercial Items. Upon completion of the above, the Government shall issue a single award for all items to the Vendor whose quotation, conforming to the solicitation and evaluation criteria, is considered to be most advantageous to the Government, with Technical Acceptability and Past Performance, when combined, being significantly more important than price. The Government reserves the right to not issue an award if it is not in the best interest of the Government. The Government reserves the right to award a contract to other than the lowest priced Vendor. This announcement will close at 5:30 PM EST local time on 29th of March, 2024. Contact Hillary Kang-Parker who can be reached by email hillary.s.kang-parker.civ@us.navy.mil. ******* End of Combined Synopsis/Solicitation ********

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N3904024R0003
  1. Combined Synopsis
  1. 4×
    Combined SynopsisCurrentFeb 20, 2024

    45WB Regular Boat Overhaul

    Notice 590107c0125c43fb99c5f00ed0f25f9a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Place of Performance: Portsmouth, VA Kittery, ME Bremerton, WA Pearl Harbor, HI Kings Bay, GA Silverdale, WA Groton, CT San Diego, CA Description This presolicitation notice under FAR 5.101 advises that the Naval Sea Systems Command (NAVSEA) intends to issue a solicitation (request for proposals) in the first quarter of fiscal year 2027 for a multiple-award contract indefinite-delivery indefinite-quantity (MAC IDIQ) for discrete production, non-discrete production and other production work to support the Navy’s four public shipyards and Trident Refit Facilities in accomplishing repair, maintenance, and modernization of all submarines. The initial solicitation, N00024-25-R-4321 established a MAC IDIQ framework for procuring work during Chief of Naval Operations (CNO) availabilities on SSNs. This baseline capability is now designated as Requirement 1. This upcoming solicitation also addresses new Requirements 2 and 3. Requirement 2 consists of procuring work during availabilities on SSBNs and SSGNs at designated Submarine Maintenance Repair Facilities. Participating locations include: Norfolk Naval Shipyard (NNSY), Puget Sound Naval Shipyard (PSNS), Pearl Harbor Naval Shipyard (PHNSY), Portsmouth Naval Shipyard (PNSY), Trident Refit Facilities (TRFs) at Kings Bay and Bangor (TRFKB and TRFB), Naval Submarine Base New London (SUBASE New London) and Naval Base Point Loma (NBPL) Requirement 3 consists of procuring work during availabilities on SSNs specifically at TRFKB, TRFB, SUBASE New London, and NBPL. The specific requirements will be defined at the delivery order level, and will encompass efforts such as preservation, structural/non-destructive testing, shipboard work, electrical services, component repair, and engineering support. Efforts include performing drydock submarine repair, maintenance and alterations at NNSY, PSNS & IMF, PHNSY & IMF, PNSY, TRFKB, TRFB, SUBASE New London, and NBPL and performing the repair and restoration of select critical components. Offerors are not required to have their own drydock. Work would be performed under delivery orders anticipated to be competed among MAC IDIQ awardees over a five-year base ordering period with three additional option years, that was already established under N00024-25 R-4321. The awarded contracts included a five-year base ordering period, with three, one-year option periods, for a total ordering period of up to eight years. The ordering period commenced from the time of contract award in FY25 and will run through 1 September 2033, if all options are exercised. The contract periods were established as follows: Base Period - Contract Award through 1 September 2030 Option Year 1 - 2 September 2030 through 1 September 2031 Option Year 2 - 2 September 2031 through 1 September 2032 Option Year 3 - 2 September 2032 through 1 September 2033 Any new award made because of rolling admissions will follow the same contract ordering period periodicity as provided above. The Navy will include rolling admissions provisions enabling the Navy to annually announce an interim competition for the purposes of adding additional contractors to the MAC IDIQ. The Navy has categorized the requirements to be procured under the MAC IDIQ into two tiers: Critical (Lot 1) and Non-Critical (Lot 2), as defined as follows: Critical (Lot 1) requirements consist of efforts that involve critical systems. Due to the nature of critical systems onboard the submarine and the likelihood that delays in completing work associated with these systems will have a significant impact on the overall CNO availability schedule, the Navy will require contractors to possess capability and capacity to meet technical requirements for critical systems to be eligible for Lot 1 scope. To complete this work, awardees are expected to have the knowledge, skills, and experience necessary to complete multiple concurrent complex CNO availabilities on critical systems. Critical systems (Lot 1), although not all inclusive, the following is a list of the most common critical systems. All systems listed imply areas of the system and equipment requiring work certifications that are not subject to special emphasis program controls (e.g., SUBSAFE, FBW, DSS/SOC). Vertical Launch Systems (VLS) Ship control system components Torpedo tubes Bow planes Sonar dome Large vertical array Shipboard hydraulics systems Normal fuel oil tank and systems Lube oil systems Non-Critical (Lot 2) requirements consist of efforts that do not involve critical systems but may include systems and equipment requiring work certifications. Lot 2 scope is expected to require fewer specialized contractor capabilities, both in terms of personnel and equipment. The Navy intends to issue Non-Critical (Lot 2) efforts under a Small Business Set-Aside. Categories of work intended to be outsourced for both Critical (Lot 1) and Non-Critical (Lot 2) are described below: PRESERVATION - Includes administration, production support, materials, tools, and equipment to deliver preservation support that includes preservation for non-SUBSAFE hull and structural repair, internal and external submarine tanks preservation, lead bin repair and fabrication, de-ballasting and re-ballasting, anodes removal and install, tile removal and install, and safety track repair. STRUCTURAL/NON-DESTRUCTIVE TESTING (NDT) - Includes application of technical methods to examine materials or components in ways that do not impair their future usefulness and serviceability to measure geometrical characteristics and to detect, locate, measure, and evaluate flaws. NDT is also known as non-destructive examination, non-destructive inspection, and non-destructive evaluation. NDT is comprised of, but not limited to, the following methods and techniques: Magnetic Particle Testing, Liquid Penetrant Testing, Radiography Testing, Visual Testing, Ultrasonic Testing, and Eddy Current Testing. SHIPBOARD WORK - Includes the following functions: Temporary Service Sheet Metal Mechanic, Temporary Service Electrician, Temporary Service Pipefitter, Marine Machinery Mechanic, Shipwright, Plastic Fabricators/Wood Crafting, Fabric Worker, Laborer, Electrician, Shipfitter Mechanic, Sheetmetal Mechanic, Pipefitter, Insulator, Inside Machinist, Marine Electrician, Electronics Technician, etc. for systems and subsystems that may include computers and associated electronics; hardware, software, data, and payload control systems for Vertical Launch System (VLS)/Virginia Class Payload Tubes, Torpedo Tubes, and Torpedo Racks. ELECTRICAL - includes management oversight, technical support, labor, material, support, and equipment to accomplish a full range of depot level repairs and alterations, including troubleshooting, corrective and preventive maintenance, installation, and removal, replacement and/or repair of electrical equipment and systems onboard submarines. FIRE WATCH AND TANK WATCH - Includes execution of safety protocols including standing fire and tank watches. Fire watch support duties and functions, for the purpose of this effort, are defined as performing visual observation of the operation area on which industrial activity is being performed and extinguishing incipient stage fires as specified. Tank watch support duties and functions, for the purpose of this effort, are defined as performing visual observation of the operation area on which industrial activity is being performed. COMPONENT REPAIR - Includes repair and overhaul work on valves, pumps, actuators, and other components that are part of the Navy’s Corporate Component Repair Program, Advance Equipment Repair Program, and other Navy-owned Depot Level Repairables. Support shall include pre-testing, inspection, repair/replacement, and certification of completion. ENGINEERING AND TECHNICAL SUPPORT - Includes the following functions: engineering and technical support related to ship systems, operational systems, and technology efforts. System engineering, technical assistance, and other technical support to the Program Offices and Naval Shipyards. Offerors are not required to be technically capable in all categories of work in one Lot to be acceptable. Demonstrated proficiency in one or more of the categories is sufficient to be awarded a MAC IDIQ under this effort. In order to be considered for contract award, offerors must have a CONFIDENTIAL facility clearance by the time of award. Prior to the issuance of the formal solicitation for this procurement, NAVSEA reserves the right to release a draft copy of the solicitation for industry review. The Government will not provide printed copies of the solicitation, whether in draft or final form. Interested firms should monitor www.sam.gov for the release of the solicitation and other updates related to this procurement. Inquiries concerning this presolicitation notice may be submitted via email to the points of contact identified in this presolicitation notice. The Government does not commit to providing a response to inquires received in response to this presolicitation notice. This presolicitation notice is for informational purposes only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept, proposals in response to this presolicitation notice. This presolicitation notice does not constitute a request for proposals, a promise to issue a request for proposals, or a promise by the Government to pay for information or inquires received in response to this presolicitation notice or any subsequent synopsis or notice. The information contained herein is subject to modification and in no way binds the Government to award a contract. This is not a presolicitation notice issued under the advisory multi-step process set forth in FAR 15.101(e).
-Pre-Solicitation11/21/2026
-AwardedOpen
The Department of the Navy, NSWCCD intends to issue a competitive solicitation for a Single-Award, Indefinite-Delivery, Indefinite-Quantity (IDIQ), Firm-Fixed-Price contract featuring a five-year ordering period for Watercraft Industrial Support Detachment Norfolk (WISDN).The contractor shall furnish all management, personnel, materials, material support services, equipment, power, and facilities necessary to perform marine boatyard and industrial repairs, maintenance, modernization, and overhaul on boats and craft assigned to NSWCCD Detachment Norfolk, ranging in length from 1 foot to 100 feet. All work must be performed exclusively at the contractors local industrial facility capable of accommodating the full range of assigned vessels within the local operational area. Requirements will be executed via individual delivery orders. The solicitation and all associated documents will be released electronically in the PIEE Solicitation Module on or around 20 November 2026.
-Pre-SolicitationOpen
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YON-325. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YON-325 • Length: 199 FT • Width: 54 FT • Height: 15 FT • Age: 21 YRS • Hull Type: Steel • Draft: 3 FT • Full Displacement: 2,848 L Tons • Light Load: 706 L Tons Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel from Manchester Fuel Depot to the Contractor’s facility. Dock, wash, and clean exterior surfaces of the vessel upon docking. Replace zinc anodes on hull / Skegs. Accomplish preservation to Underwater Hull, Freeboard, Main deck, Deck house, Cargo piping and all deck fittings. Clean non-skid located Main deck, Deck house top and Cargo deck. Remove, clean and install Rubber fenders. Modify existing Piping eliminate Aft Flow Meter and insert spool. Accomplish Ultrasonic test measurement and visual inspection of the hull, Main deck, Cargo deck and Deck house top. Open, Clean, Pump and maintain clean and dry each tank/void. Inspect tanks/voids for defects Refresh Exhaust Muffler for Yanmar and Main Engine. Replace Solar Panels. Remove Antenna Support Modification. Replace Fuel Oil Tank Piping. Replace and Calibrate Cargo Tank Level Indicator’s (TLI’s). Perform Preliminary Air test of Tanks/voids/Steel Fendering and Skegs. Accomplish a final closure inspection of each tank/void upon completion of all work installing new gaskets and fasteners. Perform Final Air Test of Tanks/voids/Steel Fendering and Skegs. Accomplish repair, replace gaskets, and adjust watertight hatches and doors. Accomplish Cargo Pump Diesel and Diesel generator maintenance and repair. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Calibration of TLI’s, shall be conducted at Manchester Fuel Depot (MFD) in Manchester, WA. YON-325 Prime Period of Performance: Estimated August 2027 through November 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "Maintenance, Repair, and Preservation of YON-325 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of YON-325 package? 5. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA)? When to Submit: Responses are requested no later than 12:00PM PT, on 18 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.
-Market Research11/18/2026
This solicitation has been released and closes on 4 December 2026 at 3:00 PM EST. For any questions please contact stephanie.l.plitt.civ@us.navy.mil and dustin.j.bordelon.civ@us.navy.mil. Please see the RFP and all required documents attached to this notice.
-Solicitation12/04/2026

Additional Details

Solicitation Number

N3904024R0003

Archive Date

Apr 27, 2024

Office Address

PORTSMOUTH, NH, 03801-5000