Notice ID: 82f50cfb2453477a8d2fc6955fda3f89Sources Sought
RENTAL, DELIVERY, MAINTENANCE AND REPAIRS SERVICES FOR FORKLIFT AT CFAS, JAPAN
Archived. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM UTC+09:00
- Posted
- February 11, 2022
- Notice type
- Sources Sought
- NAICS
- 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVFACSYSCOM FAR EAST
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N4008422T6001
- Notice ID
- 82f50cfb2453477a8d2fc6955fda3f89
Description
THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS IS NOT A REQUEST FOR PROPOSALS. The intent of this notice is to identify potential offerors for market research purposes. The Naval Facilities Engineering Command (NAVFAC) Far East, PWD Sasebo, is currently seeking interested contractors who are both willing and qualified to provide to perform Delivery, Rental, Repair and Maintenance Services for Forklifts at CFAS Japan. The Contractor shall provide all labor, management, supervision, tools, material and equipment required to perform this requirement. The Government is contemplating issuing a Commercial solicitation in accordance with FAR Part 12. NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance. Provide following four types of Forklifts: 1. 0.5 TON OR 0.7 TON ELECTRIC FORKLIFT Fork forward "picking" type: POTENTIAL MODEL TYPE_7FBPR5_ The Contractor shall provide forklift meeting following characteristics or equivalent. (1) Power: Battery (2) Type: Fork forward picking type (3) Load capacity: 0.5 ton with deviation of plus/minus five (5) % (4) Maximum load height (fork height): 5 meters (5) Fork length: 770 mm or less (6) Minimum turn radius: Within 1.21 meters (7) Minimum 90 degree turn, within 1.5 meters (8) Overall length: 2.3 meters or less 2. 1.2 TON ELECTRIC FORKLIFT Turret fork, 3-way 180 degrees, reach type: POTENTIAL MODEL TYPE_2RFBA12_ The Contractor shall provide forklift meeting following characteristics or equivalent. (1) Power: Battery (2) Type: Turret fork, 3-way 180 degrees, reach type (3) Load capacity: 1.2 tons with deviation of plus/minus five (5)% (4) Maximum load height (Fork height): 6 meters (5) Fork length: 920 mm or greater (6) Capable of loading/unloading in 2.4 meter wide working area. 3. 1.5 TON ELECTRIC FORKLIFT Stand-up fork forward "lifting" type: POTENTIAL MODEL TYPE _7FBR15_ The Contractor shall provide forklift meeting following characteristics or equivalent. (1) Power: Battery (2) Weight: 2,190 kg (3) Type: Stand-up fork forward lifting type (4) Maximum lifting power: 1.5 ton (5) Gate Height: Maximum 4.85 meters (6) Forklift height: 1.995 meters (7) CAB: Covered head/top, open side is acceptable. (8) Side shift (9) Two side mirrors 4. 1.8 TON ELECTRIC FORKLIFT Electric "Standard" type: POTENTIAL MODEL TYPE 7FBR18 The Contractor shall provide forklift meeting following characteristics or equivalent. (1) Power: Battery (2) Type: Standing/Standard type (4) Maximum load height (fork height): 4 meters (5) Fork length: 920 mm or less (6) Minimum turn radius: Within 1.71meters (7) Minimum 90 degree turn, within 1.9 meters (8) Overall length: 2.07 meters or less The Government is contemplating a multiple year (one year base period and four one-year option periods), single award Indefinite-Delivery Indefinite Quantity (IDIQ) type performance based service contract comprised of Recurring Work. If you are capable of and interested in performing this requirement, please complete and submit Attachment (1): Contractor Information. Please provide any comments/recommendations/questions in this form regarding the acquisition approach and/or the requirement. The response will be used as market research to help determine the acquisition method utilized by the Government for this requirement. In order to be eligible for any U.S. Government award, a contractor must register in the System for Award Management at www.sam.gov and have a valid CAGE code. Interested contractors are encouraged to begin the registration process as soon as possible. If you are interested in this requirement or have any feedback or questions, please provide your Contact information to include: Company name Your name Email address Telephone number(s) Questions or other feedback regarding this potential consolidation Please submit the information to Masayo Sonoda via e-mail at Masayo.Sonoda.JA@fe.navy.mil, no later than 12:00 pm on 25 FEB 2022, using the subject line Sources Sought N4008422T6001 . Contracting Office Address: NAVFAC Far East, PWD Sasebo, FEAD ACQ Branch PSC 476 BOX 66 FPO AP 96322-1160 Point of Contact(s): Masayo Sonoda, Contract Specialist Masayo.Sonoda.JA@fe.navy.mil / 81-956-50-2394
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N4008422T6001- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentFeb 11, 2022
RENTAL, DELIVERY, MAINTENANCE AND REPAIRS SERVICES FOR FORKLIFT AT CFAS, JAPAN
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Amendment 0001 1. Provide the government's responses to questions received. 2.Extend the solicitation closing date from 12 Nov 2026 to 16 Nov 2026. ******************************************************************************************************** Maintenance of Fire Suppression System for HAZMAT lockers in support of Forward Deployed Naval Forces (FDNF), Puget Sound Naval Shipyard Yokosuka and Intermediate Maintenance Facility (PSNS&IMF). PERIOD OF PERFORMANCE: Base Year: 01 DEC 2026- 30 NOV 2027 Option Year I: 01 DEC 2027- 30 NOV 2028 Option Year II: 01 DEC 2028- 30 NOV 2029 Option Year III: 01 DEC 2029- 30 NOV 2030 Option Year IV: 01 DEC 2030- 30 NOV 2031 PLACE OF PERFORMANCE: Berth 12 or at a prearranged location at Fleet Activities Yokosuka in Yokosuka, Japan. Access to Fleet Activities Yokosuka shall be coordinated in advance with the PSNS&IMF. This solicitation is intended only for sources duly authorized to operate and do business in Japan, as prescribed by DFARS 252.225- 7042. Prime Contractors outside of Japan must submit documentation that unambiguously demonstrates the Offer's compliance with DFARS 252.225-7042 (e.g. proof of incorporation) as part of their offer. The Government reserves the right to consider only those quotes that adhere to the instructions provided in the solicitation. Submissions that omit required information, contain ambiguities, or are incomplete may not be considered. | - | Solicitation | 11/16/2027 |
The Regional Contracting Office has a requirement for Marine Corps Air Station Iwakuni Japan. The requirement is for Hydrostatic Testing of (81) Amerex B674 Wheeled Haltron I Fire Extinguishers. The performance location of this contract wil take place either aboard Marine Corps Air Station Iwakuni or at a mutally agree upon location. The start of the performance is set to start on or before January 15, 2027. The performance of the Hydrostatic Testing must be in accordance with National Fire Protection Association (NFPA) 10, Compressed Gas Association (CGA) C-1, CGA C-6, and Department of Transportation (DOT), Title 49, Code of Federal Regulations (CFR), Part 180. More details of the requirement can be found in the Performance Work Statement in the attached file. All offeror must provide their Quotation, Technical Approach, and Relevant Past Performance outlined in 52.212-1 Instructions to Offerors found on page 18 of 23 of the solicitation. All quotation must be submit it by November 30, at 0800 JST. All questions must be submit it to ho.h.lin.mil@usmc.mil no later than November 16, at 0800 JST | - | Solicitation | 11/30/2026 |
***THIS IS A SOURCES SOUGHT NOTICE ONLY*** Naval Facilities Engineering Systems Command Far East (NAVFAC FE) ROICC Camp Butler is conducting a Sources Sought Notice. The intent of this notice is to conduct market research and identify potential contractors that are capable of performing the work in Japan and interested in the Department of Navy’s requirement for Facility Weight Handling Equipment (WHE) Maintenance and Repair Services at Marine Corps Installation Pacific (MCI-PAC) Camp Smedley D. Butler Okinawa, Japan. The information will be used within the NAVFAC FE Contracting Division and will not be disclosed outside the agency. This notice does NOT constitute a request for proposal, request for quote, or invitation for bid. No reimbursement will be made for any costs associated with providing information in response to this announcement or any follow-up information requests. SERVICES DESCRIPTION: The proposed Facility WHE maintenance and repair services will require the contractor to provide all labor, supervision, management, tools, materials, equipment, facilities, transportation, incidental engineering, and other items necessary to perform WHE maintenance and repair services at Marine Corps Installation Pacific (MCI-PAC) Camp Smedley D. Butler Okinawa, Japan. (e.g., Camp Courtney, Camp Foster, Marine Corps Air Station (MCAS) Futenma, Camp Gonsalves, Camp Hansen, Camp Kinser, Camp Lester, Camp Schwab). The services anticipated: Service orders Preventive maintenance (PM) Inspection, Testing and Certification Program The anticipated contract type is a single award, Indefinite-Delivery Indefinite-Quantity (IDIQ) contract with Recurring and Non-Recurring work items. The anticipated period of performance is a twelve-month base period with four (4) one-year option periods. This notice is for information and planning purposes only and shall not be construed as a solicitation or as an obligation on the part of the Government to issue a Solicitation or award a contract. The Government does not intend to award a contract based on responses. Entities responding to this Sources Sought Notice should submit the minimum information necessary for the Government to make a determination that adequate business entities exist that are capable of satisfying the Government’s requirements. The North American Industry Classification System (NAICS) Code is 811310 Commercial and Industrial Machinery and Equipment. It is requested that interested firms capable of providing the requested services submit a brief capabilities statement package (no more than 12 single sided pages, including attachments, single spaced, 12 point font minimum) demonstrating ability to perform the requested services. The documentation shall address the following: COMPANY PROFILE to include all of the following: (1) Company name and address; (2) Company point of contact (including title, telephone number and email address); and (3) SAM Unique Entity Identifier (UEI) and CAGE code. RELEVANT EXPERIENCE: Provide a minimum of one (1) or up to a maximum of five (5) projects indicating your experience in providing services for the requirement stated above. Please indicate number of years of experience and location of work. SUBCONTRACTORS: If known, provide established subcontractor arrangements or partnerships with other companies (Optional). LICENSE/CERTIFICATIONS: Indicate any applicable local/and or industry certification your company or employee possess relevant to this procurement. MISC INFO: Provide anything pertinent to this industry and/or type of work, in general, that the Government should consider. Interested firms may submit information using the form provided under separate file titled “Sources Sought – Contractor Information Form (attachment 1)” to demonstrate capabilities, capacity and experience. Notifications of interest must be submitted in writing via email; phone calls will not be accepted. Interested parties should respond as soon as possible but no later than 17 November 2026 at 10:00 am (JST). Responses to this Sources Sought Notice shall be emailed to the following POC: POC: Contracting Officer (KO): Ms. Marina Porter, Email: marina.p.porter.civ@us.navy.mil Contract Specialist (CS): Ms. Akiko Hilderbrand, Email: akiko.hilderbrand2.ln@us.navy.mil Acknowledgement of receipt of responses will not be made, nor the Government's evaluation of the information received. A determination by the Government to proceed with the acquisition is within the discretion of the Government. Please be advised that telephone inquiries will not be accepted. THIS IS A SOURCES SOUGHT NOTICE ONLY. | - | Market Research | 11/17/2026 |
EURO-DIESEL DRUPS (DIESEL ROTARY UNINTERRUPTIBLE POWER SUPPLY) MAINTENANCE CONTRACT AT USAG HUMPHREYS | - | Solicitation | 11/30/2026 |
This Sources Sought Notice is issued in accordance with Federal Acquisition Regulation (FAR) Part 10, specifically FAR 10.001(a)(2)(ii), for market research purposes only. The United States Air Force is seeking information from potential and eligible vendors capable of performing the equipment maintenance.Attachment 1-DRAFT Performance Work Statement. This announcement is not a request for proposals and does not obligate the Government to issue a solicitation or award a contract. THIS REQUIREMENT IS OPEN TO VENDORS THAT ARE LEGALLY AUTHORIZED TO CONDUCT BUSINESS IN THE REPUBLIC OF KOREA.This is LCS Funded requirement. See attached eligibility for award of ROK MND contract. | - | Market Research | 11/11/2026 |
Additional Details
Solicitation Number
N4008422T6001
Archive Date
Not specified
Place of Performance Country
JPN
Office Address
FPO, AP, 96349-0013