GovChime
Notice ID: 02ca3dbfdd52489d9c41e47f0ecb18feAward NoticeAwardedArchived

Admiralty Village Sewer Investigation & Repairs

Awarded on September 8, 2026. Full description on SAM.gov.

Awarded tounder N4008526D0039 (source: SAM.gov award notice)• $4.5M

Overview

Posted
September 9, 2026
Notice type
Award Notice
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVFAC.NAVFAC ATLANTIC CMD.NAVFAC MID-ATLANTIC.NAVFACSYSCOM MID-ATLANTIC
Place of performance
Kittery, Maine
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov
Award date
Sep 8, 2026
Award amount (SAM.gov award notice)
$4.5M

Identifiers

Solicitation number
N4008526D0039
Notice ID
02ca3dbfdd52489d9c41e47f0ecb18fe
Award number (PIID)
N4008526D0039

Description

This contract action is firm-fixed-price, but was not awarded competitively. The action was awarded on a sole-source basis under the Small Business Administration 8(a) Program pursuant to FAR 19.805-1, as the total estimated value of the requirement does not exceed the competitive threshold.

Full description on SAM.gov

Award Overview

Award Number

N4008526D0039

Award Amount (SAM.gov award notice)

$4.5M

Award Date

Sep 8, 2026

Awardee

Awardee UEI

VED2RJE5QUG3

Awardee CAGE Code

7XZH8

Awardee Address

Windsor, CT 06095, UNITED STATES

Original Solicitation

Notice ID: 02ca3dbfdd52489d9c41e47f0ecb18fe

Posted Date: Sep 9, 2026

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Award NoticeArchivedCurrent

    Admiralty Village Sewer Investigation & Repairs

    Notice 02ca3dbfdd52489d9c41e47f0ecb18fe on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Requirement Title: 12K Telehandler Material Handling Equipment (MHE) to support required movement of equipment and materials Portsmouth Naval Shipyard (PNSY) is seeking to rent a 12K Telehandler. The Statement of Work (SOW) outlines the specifications that meet the essential requirements for the procurement of rental equipment necessary to perform Material Handling. The application for this equipment is located at Portsmouth Naval Shipyard in Kittery, ME. Solicitation Number: N3904027Q1002 A001 Response Deadline: November 18, 2026, at 12:30 PM ET POC: Bob Watters, robert.n.watters.civ@us.navy.mil Required Delivery Date/Period of Performance: Base year: 12/30/2026 – 12/28/2027 (52 weeks) Option Period 1: 12/29/2027 – 10/10/2028 (41 weeks) Option Period 2: 10/11/2028 – 11/7/2028 (4 weeks) Place of Performance: Portsmouth Naval Shipyard Kittery, ME PNSY METHOD OF PROPOSAL SUBMISSION: Offers shall be emailed. All responsible sources may submit a quote which shall be considered by the agency. System for Award Management (SAM): Vendors must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. All quotes shall include the embedded Request for Quote (RFQ). All quotes must have the highlighted sections completed. Please make sure to include all technical data sheets and information relating to the rental equipment.
-Combined Synopsis11/18/2026
This sources Sought announcement is published FOR MARKET RESEARCH PURPOSES ONLY, pursuant to FAR 15.201(e) Exchanges with Industry. No solicitation is available. In accordance with FAR 15.202(3), responses to this notice are NOT offers and CANNOT be accepted by the Government to form a binding contract. Portsmouth Naval Shipyard is seeking to identify sources capable of supporting a Firm Fixed Price contract to refurbish C02 scrubber and burner equipment, including motors, mounts, and heater boxes on a Los Angeles Class Submarine. This sources sought notice is a market research tool being utilized to identify potential and eligible firms capable of providing these services prior to determining the method of acquisition and issuance of a Request for Proposal (RFP). As such, all interested parties are encouraged to respond. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. If your organization has the potential capacity to accomplish this requirement, please provide the following information: 1) Organization name, address, email address, website address, telephone number, and both the size and type of ownership for the organization and 2) tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims or organizational and staff capability. Questions regarding this requirement may be emailed to Gordon Roberts at Gordon.j.robertsl@navy.mil. Telephone inquiries will not be accepted or acknowledged, and no feedback will be provided to companies regarding their submissions. THIS NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.
-Market Research11/15/2026
GENERAL INFORMATION AND STATUTORY AUTHORITY The Supervisor of Shipbuilding, Conversion, and Repair, USN, Bath, ME (SUPSHIP Bath) announces its intent to solicit, negotiate, and award a sole-source, Firm-Fixed-Price (FFP) contract to the University of Maine Orono's Advanced Structures and Composites Center (ASCC), located in Orono, ME. The statutory authority permitting other than full and open competition is 10 U.S.C. 3204(a)(1) (formerly 10 U.S.C. 2304(c)(1)), as implemented by Federal Acquisition Regulation (FAR) 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Pursuant to FAR 5.102 and FAR 6.305, the redacted Justification and Approval (J&A) document approved by the Competition Advocate (Code 400) on 4 September 2026 is attached to this special notice. 2. DESCRIPTION OF REQUIREMENT AND SCOPE The Government requires the design, material validation, physical testing, and fabrication of custom-fit, weather-tight, impact-resistant, and flame-retardant temporary protective covers. These specialized covers provide heavy industrial barrier protection for the sensitive, high-value AN/SPY-6(V)1 Air and Missile Defense Radar (AMDR) array faces on designated Flight III Guided-Missile Destroyer (DDG) platforms during active shipyard construction, outfitting, and pier-side integration. The anticipated scope of work comprises: Base Requirement (CLINs 0001 - 0004): Design review and engineering, material formulation and drop validation testing, and additive manufacturing delivery of one (1) initial shipset of four (4) customized temporary protective covers, including complete technical data deliverables under Government Purpose Rights (GPR). Support Services (CLIN 0005): Firm-Fixed-Price post-manufacturing support package consisting of pre-priced engineering hours for shipyard rigging coordination and fit-checks (SLIN 0005AA) and pre-priced field patch and repair material kits (SLIN 0005AB). Option Quantities (CLINs 0006 & 0007): Pre-priced contract options for up to two (2) additional replication shipsets of four (4) covers each (totaling eight (8) option covers) to support subsequent Flight III hull outfitting schedules. The total estimated value across the base requirement and all options is under $2,000,000, funded utilizing SCIB funding. 3. SOLE SOURCE JUSTIFICATION AND CONTRACTOR QUALIFICATIONS Detailed in the attached redacted Justification and Approval. 4. SUBMISSION OF CAPABILITY STATEMENTS THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. A solicitation will not be posted publicly. However, all responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. Interested parties must demonstrate in writing their existing, certified capability to meet the Government's technical and schedule requirements without causing unacceptable delays to ongoing naval construction. Submissions must include: Detailed evidence of an existing, fully operational large-scale additive manufacturing gantry system capable of printing a single-piece or modular thermoplastic enclosure matching the physical envelope of the AN/SPY-6(V)1 radar array foundations. Demonstrated technical capability to compound, print, and certify composite materials. Demonstrated ability to ingest shipbuilder 3D CAD parametric solid models directly into machine-ready additive instructions without requiring external mold tooling, and delivery of initial shipset articles. Company name, CAGE code, Unique Entity Identifier (UEI), business size classification under NAICS 326199, and primary technical point of contact. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement in the future.
-Special Notice12/12/2026
Portsmouth Naval Shipyard (PNSY) is seeking to lease a Desiccant Climate Controlled Unit (DCCU) system to provide dry and tempered process air for conditioning various spaces used for industrial applications. The system must include multiple DCCU’s, a chiller, chilled water pump, chilled water hose manifolds, hose assemblies as well as the associated onboard controls to operate both the chilled water system and DCCU’s. The intent of the chiller, pump, hose assemblies, manifolds and ancillary components is to establish a temporary chilled water system which serves all of the DCCU’s pre-cooling and post-cooling coils. All equipment conveying air to and from the industrial space must be pre-wired with remote E-Stop capability in order to provide a means to secure airflow in the event of an emergency response. Each DCCU and Chiller must be frame/skid mounted and meet the lifting & handling requirements as defined in the specification. Period of Performance Base: 12/14/2026 – 12/12/2027 (52 Weeks) , Equipment (DH-01 through DH-04) Base: 4/5/2027 – 10/3/2027 (26 Weeks) , Equipment (DH-05 through DH-14) Option 1: 12/13/2027 - 10/15/2028 (44 weeks) , Equipment (DH-01 through DH-04) Option 2: 10/16/2028 – 11/12/2028 (4 weeks) , Equipment (DH-01 through DH-04) Place of Performance: Portsmouth Naval Shipyard (PNSY), Maine
-Solicitation11/16/2026
-Combined Synopsis11/11/2026

Additional Details

Solicitation Number

N4008526D0039

Archive Date

Sep 23, 2026

Office Address

NORFOLK, VA, 23511-0395