Notice ID: 2eed458132648d12c57837177621cc5dAward NoticeAwarded
C--Indefinite Delivery / Indefinite Quantity Contract for Multi-Discipline A-E Services for Various Facilities and Activities under the Cognizance of the Naval Facilities Engineering Command, Marianas
Awarded on September 16, 2016. Full description on SAM.gov.
Awarded tounder N4019216D0001 (source: SAM.gov award notice)• $67.5K
Overview
- Posted
- September 21, 2016
- Notice type
- Award Notice
- NAICS
- 541330: Engineering Services
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVFACSYSCOM MARIANAS
- PSC
- C: ARCHITECT/ENGINEER SERVICES
- Last updated
- Dec 5, 2025
- Award date
- Sep 16, 2016
- Award amount (SAM.gov award notice)
- $67.5K
Identifiers
- Solicitation number
- N4019214R0001
- Notice ID
- 2eed458132648d12c57837177621cc5d
- Award number (PIID)
- N4019216D0001
Description
The Multi-Discipline A-E IDIQ services has been awarded as a HUBZone set-aside to Setiadi Architects LLC. The total maximum dollar value, including the base period and all option periods, is $20,000,000 for the entire contract term. The minimum guarantee for the entire contract term (including option periods) will be satisfied by the award of the initial task order. The options may be exercised within the time frame specified in the resultant contract at the sole discretion of the Government subject to workload and/or satisfaction of the A-E performance under the subject contract. There will be no dollar limit per task order or period, but the estimated maximum per period is $4,000,000. The seed project in the amount of $67,510 is to (a) revalidate and update the preliminary Design-Build RFP construction cost estimate for BEQ Building 582 in conjunction with Government updated DB RFP Scope of Work; (b) develop a PWD Installation Level DD1391 planning document in accordance with OPNAVINST 11010.20H; (c) develop a construction schedule; and (d) develop the draft NAVFAC Sustainability and Energy Data Record Card (NSEDRC) to identify any energy saving components that can be incorporated into the project and its cost to implement. Work for this task order is expected to be completed 6 months from the date of the task order.
Award Overview
Award Number
N4019216D0001
Award Amount (SAM.gov award notice)
$67.5K
Award Date
Sep 16, 2016
Awardee
Original Solicitation
Notice ID: 2eed458132648d12c57837177621cc5d
Posted Date: Sep 21, 2016
Original Response Deadline: Not specified
Task Orders Under This IDV
Top 10 by total obligated
- $1.3MSigned Jul 30, 2021
- $1.3MSigned Oct 27, 2022
- $1.3MSigned Feb 25, 2022
- $1.3MSigned Jul 28, 2021
- $1.3MSigned Sep 3, 2020
- $1.2MSigned Feb 19, 2021
- $1.2MSigned Feb 23, 2021
- $1.1MSigned Jul 8, 2020
- $1.1MSigned Sep 4, 2020
- $871.4KSigned Feb 3, 2023
More From This Vendor
Top 5 most recent
- $1.2MSigned Jul 31, 2026
- $777.6KSigned Jun 16, 2026
- $605.2KSigned May 5, 2026
- —Signed Feb 20, 2026
- $183.3KSigned Feb 4, 2026
Contacts
Contracting Officer
Primary Contact
Juvee Pangelinan (671) 339-8098, Juvee.Pangelinan@fe.navy.mil or Doris Castro (671) 339-8465, Doris.Castro@fe.navy.mil Juvee.Pangelinan@fe.navy.mil
Documents
No documents available.
Lifecycle
Solicitation:
N4019214R0001- Combined Synopsis
- Awarded
This opportunity has been awarded.
- 3×Combined SynopsisJun 4, 2014
C--Indefinite Delivery / Indefinite Quantity Contract for Multi-Discipline A-E Services for Various Facilities and Activities under the Cognizance of the Naval Facilities Engineering Command, Marianas
- AwardedCurrentSep 21, 2016
C--Indefinite Delivery / Indefinite Quantity Contract for Multi-Discipline A-E Services for Various Facilities and Activities under the Cognizance of the Naval Facilities Engineering Command, Marianas
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
THIS SOURCES SOUGHT NOTICE HAS BEEN UPDATED, SEEKING SF330 SUBMITALS. THERE IS NO RFP PACKAGE TO DOWNLOAD. ALL INFORMATION NEEDED TO SUBMIT SF330 DOCUMENT IS CONTAINED HEREIN. SF 254S AND SF 255S WILL NOT BE CONSIDERED. NOTE: FAR PART 12 (COMMERCIAL) IS NOT APPLICABLE TO THIS PROCUREMENT. SUMMARY: The Naval Facilities Engineering and Expeditionary Warfare Center (NAVFAC EXWC), Port Hueneme, California is soliciting SF330s for a single-award, Indefinite Delivery Indefinite Quantity (IDIQ), Architect and Engineering (A-E) contract for various environmental restoration (ER) and other environmental projects. The A-E services required will include professional services to enable NAVFAC EXWC to support other NAVFAC commands, as well as other Department of War (DoW) and federal agencies. Market research was conducted in May 2026 and there were too few qualified small businesses to warrant consideration of a set-aside, therefore this acquisition is being issued under Full and Open Competition. The North American industry Classification System (NAICS) code is the procurement 541330, and the annual size standard is $25,500,000. NAVFAC EXWC anticipates the award of an IDIQ with base ordering period of sixty (60) months, and an extension of services period not to exceed six months. The maximum value of all task order placed under this contract will not exceed $150,000,000. Individual task orders under this contract may be firm fixed price (FFP) (Estimated 40%) or cost-plus-fixed fee (CPFF) (Estimated 60%). The minimum guarantee for the IDIQ contract is $10,000. Individual task orders are anticipated to range $5,000 to $6,000,000 per task order. The estimated award date is March 2027. PROJECT INFORMATION: Firms must be capable of performing work on a wide variety of projects in Environmental Restoration (ER) and other environmental topics, in a manner that complies with federal, state, and local regulations and laws, and within timeframes required. This work will support the A-E services that NAVFAC EXWC provides to support the environmental cleanup of sites managed by the Department of the Navy and other federal agencies. Although, the majority of the work is expected to be in the continental United States, project sites could be worldwide. Specific needs will be determined based upon project requirements and as described in each task order’s Performance Work Statement or Statement of Work. A-E services required under this contract include, but are not limited to: - Environmental program development and implementation. Particularly, the contractor will support development and implementation of the Navy’s environmental restoration (ER) program, comprising the Installation Restoration (IR) and Munitions Response (MR) Programs in terms of the associated science and engineering, regulations, and policy - Research, development, testing, and evaluation (RDT&E) of innovative environmental technologies, techniques, and solutions, particularly for environmental restoration. - Planning and pilot-testing innovative environmental technologies, techniques, investigations, and solutions to support full-scale design. - Services for associated environmental programs, including remedy resilience, impacts of elevated sea water levels and extreme weather events, active range sustainability, sustainable water resources management, environmental compliance, energy efficiency, and natural resources management. The services at ER sites may involve supporting NAVFAC EXWC in the preparation, expert review, or optimization of preliminary assessments, site inspections, remedial investigations, feasibility studies, engineering evaluation/analysis (EECA), proposed plans, records of decision (RODs), remedial designs, sampling and analysis plans (SAPs) or Quality Assurance Project Plans (QAPPs), and five-year reviews for customers in the Department of the Navy and other federal agencies. These services may include site characterization, laboratory studies, and pilot testing with the aim of helping NAVFAC EXWC and its customers develop cost-effective full-scale designs and solutions for environmental projects. An important component of the services also is technology transfer (T2) to and training of the Department of the Navy and other federal agency personnel (and their contractors), who are engaged in ER or other environmental programs. Other environmental project areas may include (but are not limited to) remedy resilience, coastal flooding from seawater and groundwater, and extreme weather events, active range sustainability, sustainable water resource management, environmental compliance, energy efficiency, and natural resource management. For on-site investigations, firms must provide personnel with current health and safety training, as required by the Occupational Safety and Health Administration (OSHA) and adhere to all NAVFAC requirements for Health and Safety. Task orders will be issued with a project/site specific Scope of Work under the general scope of the contract. Typically, requests for proposals issued for individual task orders will include a general Scope of Work or a performance-based acquisition Performance Work Statement, location of work, character and extent of services required, technical requirements in addition to the requirements contained within Statement of Architect and Engineering Services (SAES). SELECTION CRITERIA: The selection criteria are listed below in descending order of importance. Items (1) thru (5) are primary criteria and (6) thru (7) are secondary criteria. Secondary criteria will only be used as 'tie-breakers' among technically equal firms. (1) Professional Qualifications: Professional Qualifications: The offeror shall provide no more than thirteen (13) resumes in Section E of the Standard Form (SF) 330. If more resumes are submitted than requested, then only the first thirteen will be considered. Providing less resumes is encouraged if provided personnel fulfill multiple roles. Experience that is not related to the work described in this solicitation should not be included. Resumes shall not be more than 2 pages each. Firms will be evaluated in terms of the general professional qualifications and technical competence in areas of work described in the "Project Information" section above. The evaluation of the resumes will consider education, training, registration, certifications, overall and relevant experience, and longevity with the firm. Projects that demonstrate successful optimization efforts that reduced project cost or time and added unique technical value, successful execution of projects where standards and methods for execution were not commonly accepted, or projects that had complex hydrogeological and regulatory site conditions will be given preference. Additionally, projects performed for the Navy or DoW as opposed to other federal agencies or other clients are preferred. Experience on the resumes should be within the last 8 years to be considered relevant. Resumes should be presented in the following three categories: Program Manager (PGM), Project Managers (PMs), and Subject Matter Experts (SMEs) in the technical areas listed above. The PGM and PMs should have a degree in engineering (environmental, civil, chemical, or related), or geological sciences, professional registrations in at least one state of the United States, and at least five (5) years of experience in managing programs or projects of similar size and complexity as expected in this contract. The states of registration and certification of relevant personnel must be included on each resume in Section E of SF 330. One PGM resume and two (2) PM resumes are required.The resumes will be rated more favorably when they demonstrate specialized experience and technical competence in the following areas: • Investigation and/or remediation of environmental media contaminated with emerging contaminants, particularly PFAS, especially projects executed for the Navy or DoW; • Investigation and/or remediation of environmental media contaminated with radiological compounds, especially projects executed for the Navy or DoW; • Experience with biological processes where advanced molecular biological tools were used for bioremediation and natural attenuation determination; • Experience with groundwater modeling to support contaminant fate and transport, design, and optimization of in-situ remediation projects; • Experience with design, technical support, or optimization of site investigation and remediation projects to address underwater sediment impacted with PCBs, PAHs, and/or heavy metals; • Experience with design, technical support, or optimization of site investigation and remediation projects to address vapor intrusion; • Experience with design, technical support, or optimization of site investigation and remediation projects related to DoW’s Munitions Response Program (MRP). • Experience with supporting science and engineering projects with innovative solutions for environmental restoration. This experience shall include projects aligned with the A-E services that NAVFAC EXWC provides to support the environmental cleanup of sites managed by the Department of the Navy and other federal agencies in compliance with federal, state, and local regulations and laws. Advanced degrees and exhibited technical depth and breadth of project experience in their specific fields will be favored for all SMEs. Section G may also include a matrix that displays the SME specialty, discipline, degree, years of experience, and state(s) of registration/certification in each of the specialized experience categories for each person on the proposed team. Resumes should indicate the project role (s) of the individual in their submission (whether PGM, PM, SME, or allied personnel). A minimum of seven (7) SME resumes are requested including: Emerging Contaminants SME, Radiological SME, Bioremediation SME, Groundwater Modeling SME, Sediment Management SME, Vapor Intrusion SME, and a MRP SME. In addition to the aforementioned personnel, three key allied personnel are also required for this contract and their resumes should be included as described here. These include one (1) resume each for: a certified industrial hygienist (CIH) accredited by the American Board of Industrial Hygiene (ABIH), an American Board of Health Physicists (ABHP) certified health physicist (CHP), and an experienced Contractor Quality Control Manager (CQCM). Roles of the 13 personnel whose resumes are presented should be clearly identified in the SF 330. (2) Specialized Experience and Technical Competence: Based on the projects presented in Section F of the Standard Form 330, firms will be evaluated in terms of specialize experience and technical competence of work specifically included in the project information section above. A project is defined as a single contract or task order. A project can also be defined as multiple task orders supporting one installation/facility or customer. Up to ten projects completed within the last 7 years from the date of the offeror’s proposal will to be considered. If more projects are submitted, the Navy will consider only the first ten (10). Projects will be rated more favorably when they demonstrate specialized experience and technical competence in the following areas: • Investigation and/or remediation of environmental media contaminated with emerging contaminants, particularly PFAS, especially projects executed for the Navy or DoW; • Investigation and/or remediation of environmental media contaminated with radiological compounds, especially projects executed for the Navy or DOW; • Experience with biological processes where advanced molecular biological tools were used for bioremediation and natural attenuation determination; • Experience with groundwater modeling to support contaminant fate and transport, design, and optimization of in-situ remediation projects; • Experience with design, technical support, or optimization of site investigation and remediation projects to address underwater sediment impacted with PCBs, PAHs, and/or heavy metals; • Experience with design, technical support, or optimization of site investigation and remediation projects to address vapor intrusion; • Experience with design, technical support, or optimization of site investigation and remediation projects related to DoW’s Munitions Response Program (MRP). • Experience with supporting science and engineering projects with innovative solutions for environmental restoration. This experience shall include projects aligned with the A-E services that NAVFAC EXWC provides to support the environmental cleanup of sites managed by the Department of the Navy and other federal agencies in compliance with federal, state, and local regulations and laws. Firms shall submit no more than two (2) page per project (size 12 Calibri with a minimum of 1” margins on the top, bottom, and sides). An organizational chart shall be provided and be no larger than 8.5” x 11”. In Section H, also indicate the estimated percentage of involvement in each project of each firm on the proposed team. (3) Past Performance. Demonstrate acceptable past performance on contracts that the firm has performed. In section H of the SF330, provide completed CPARS, for the same ten projects listed in Specialized Experience. If no CPAR exists, submit a completed Past Performance Questionnaire (PPQ’s) (Attachment A). If the CPAR is assessed at the IDIQ level, vice the task order level, PPQ’s may be submitted in lieu of the CPAR, if the IDIQ CPAR does not discuss the project/task order in sufficient detail. Ensure the contact number and, if applicable, the task order number are provided and the PPQ is signed. Selected projects must have been performed with the past seven years from the issuance of this synopsis. If PPQ’s are used, completion by the Contracting Officer’s Representative (COR), Government Project Manager, or equivalent role, is preferred. PPQ’s previously completed for other solicitations may be submitted, provided that the questions are substantially the same as those in Attachment A. Navy projects/contracts may be considered more relevant than other Department of War (DoW) agencies projects/contracts. DoW projects/contracts may be considered more relevant that state or local government or commercial project/contracts. There is no page limit for the submission of this criteria. (4) Capacity to Execute Multiple Task Orders within the Required Time: Capacity to Execute Multiple Task Order: The Government expects this IDIQ will result in an average of 14 task orders per year, most of which run two or three years. In section H of the SF330, demonstrate how the Offeror has conducted multiple task orders simultaneously, while maintaining quality and schedule, and how this additional workload will be inducted by the firm. The Offeror’s submission for this criteria is limited to two pages. (5) Small Business Participation: Small Business Participation: The Government will consider both the Offeror’s plan to include small businesses on this IDIQ contract, as well as the Offeror’s demonstrated levels of small and small disadvantaged businesses on past contracts. In Section H, provide a completed Attachment B, Small Business Participation and Commitment Strategy. Page limits are as listed in Attachment B. Large Business firms shall submit the most recent Individual Subcontract Report (ISR), or equivalent if required by state or local Government contracts, for each of the ten projects listed in the Specialized Experience and Technical Competence factor. If reports are not available, provide an explanation. If the successful Offeror is a large business concern, the firm will be required to submit a subcontracting plan with its price proposal. The anticipated prime and first tier overall small business participation rate for this acquisition (i.e. work to be performed by small businesses as the prime and/or subcontractors) is 20% of the contract value. Offerors are encouraged to exceed this percentage and seek meaningful levels of participation in each of the small business socioeconomic programs. The NAVFAC subcontracting program targets, expressed as a percentage of total subcontracted work are estimated: Small Business: 40%, HUBZone: 3%, Small Disadvantaged Business: 5%, Service-Disabled Veteran Owned Small Business: 3%, and Woman-Owned Small Business: 9%. There is no page limit for the submission of this criteria. (6) Geographic Location: The work to be performed under this contract may be worldwide, with a focus on DON installations in the United States and its territories In Section H of the SF330, discuss the office locations of the Prime Contractor that will be used to support this contract, and demonstrate, through past projects, the familiarity with the Navy Installations where work may be performed. The Offeror’s submission for this criteria is limited to two pages. (7) Volume of Work Awarded by the Navy or DoW during the Previous 12 Months: The Government will assess the volume of Navy or DoW work performed by each Offeror during the previous 12 Months. Firms will be ranked based on the least amount of work to the most amount of work, but the Government will not reject the overall most highly qualified firm solely in the interest of equitable distribution of contracts. No submission is required by the Offeror. The Government will obtain the data from SAM.gov Architect-engineer firms which meet the requirements described in this announcement are invited to submit a completed SF330 by the response date. Offerors that fail to submit an SF-330 will not be considered. Page limits, where stipulated, must be adhered to. SF330’s will be submitted electronically. At least one week prior to the closing date, offerors shall email NAVFAC_EXWC_ACQ732@us.navy.mil requesting an invitation to upload the SF330 in DoDSAFE. DoDSafe is similar to DropBox™. The site accepts files up to 8 GB and files ending with an extension of “.zip”. AMENDMENT 0001 - Attachment B is now posted for download and review; a NAVFAC-standard template for Small Business Participation and Commitment Strategy documentation. Additionally, the Contracting Office is posting multiple Clarifications in response to inquiries from industry, although no RFI period was planned or defined. Please be advised: the Contracting Office reserves the right to proceed with Qualification-Based Selection (QBS) evaluations, without answering or responding to all inquires. The advertised deadline for qualification statements (SF330) remains unchanged. | 79% | Combined Synopsis | 11/02/2026 |
SOURCES SOUGHT IDIQ ARCHITECT AND ENGINEERING MULTIDISCIPLINE SERVICES FOR SMALL PROJECTS NAVFAC MID-ATLANTIC HAMPTON ROADS AREA OF RESPONSIBILITY PREDOMINATELY FOR NORFOLK NAVAL SHIPYARD (NNSY) AND NAVAL WEAPONS STATION (NWS) YORKTOWN SOLICITATION N40085-27-R-0030 THIS IS A SOURCES SOUGHT NOTICE ONLY. THIS NOTICE DOES NOT CONSTITUTE A REQUEST FOR PROPOSAL, REQUEST FOR QUOTATION, OR INVITATION FOR BIDS. THE NOTICE DOES NOT COMMIT THE GOVERNMENT TO ISSUE ANY TYPE OF SOLICITATION OR AWARD AN ULTIMATE CONTRACT. THERE WILL NOT BE A SOLICITATION, SPECIFICATIONS, OR DRAWINGS AVAILABLE AT THIS TIME. THE NOTICE DOES NOT RESTRICT THE GOVERNMENT FROM A PARTICULAR ACQUISITION APPROACH. AS A RESULT OF THIS NOTICE, THE GOVERNMENT IS NOT OBLIGATED TO AND WILL NOT PAY FOR ANY INFORMATION RECEIVED FROM POTENTIAL SOURCES. This is a Sources Sought Synopsis announcement, a market survey for information to be used for preliminary planning purposes. The information received will be used within the Navy to facilitate the decision-making process and will not be disclosed outside of the agency. The intent of this notice is to identify potential offerors for market research purposes and to determine whether to set-aside the requirement for small business concerns. The Naval Facilities Engineering Systems Command, Mid-Atlantic is seeking eligible Small Businesses, Small Disadvantaged Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Small Businesses, and Economically Disadvantaged Women-Owned Small Businesses/Women-Owned Small Businesses capable to perform a proposed contract. They must be capable of performing Indefinite Delivery/Indefinite Quantity (IDIQ), Multi Discipline Architecture-Engineer (AE) design and engineering services for Military Construction (MILCON) and Special Project facilities predominately for Norfolk Naval Shipyard (NNSY) and Naval Weapons Station (NWS) Yorktown. However, work can be awarded for any location within the NAVFAC Mid-Atlantic Area of Responsibility (AOR), if deemed necessary and approved by the NAVFAC Mid-Atlantic Chief of the Contracting Office. It is anticipated that projects with an Estimated Construction Cost of less than $5,000,000 will be performed under the resultant contract, however, larger projects may be performed at the discretion of the Contracting Officer. Comprehensive A-E services are required in support of the new construction, renovations, repairs, replacement, demolition, alteration, and/or improvement of military and governmental facilities to include utilities for design projects. AE services may include multiple disciplines or single disciplines, including but not limited to architectural, landscape architecture, interior design, structural, mechanical, electrical, civil, geotechnical, fire protection, and cost engineering. These services will be procured in accordance with 40 U.S.C. Chapter 11, Selection of Architects and Engineers, as implemented by FAR Subpart 36.6 (DPCAP Class Deviation (CD) 2026-O0019). The IDIQ contract will be for a five-year ordering period. Services for this contract may include but are not limited to: Planning services (project programming, concept development, economic analysis); facility analysis (condition assessment, energy studies, lifecycle cost analysis, hazardous materials surveys); site investigations (geotechnical investigations, utility identification, etc.); design services (design-build RFP development, comprehensive building design, cost estimates); post construction award services (submittal review, field consultations, special inspections, eOMSI, environmental permitting, and record drawings). Project types may include but are not limited to: Facilities: Personnel housing facilities; Bachelor Enlisted Quarters (BEQ) and Bachelor Officers Quarters (BOQ)); office facilities; training facilities (operational, maintenance and classroom); support facilities (personnel support, communications, recreation, medical, utility systems and infrastructure); and industrial maintenance facilities (vehicle maintenance shops, shore intermediate maintenance activities, public works shops, warehouses). Specialized Services: telecommunication; physical security; audio-visual and collateral equipment. Projects shall be in conformance with all applicable criteria per the design/construction standards, laws and regulations, including applicable building, fire life-safety codes, and environmental regulations as outlined at the following web address: https://www.wbdg.org/dod/ufc The contract will be for a duration not to exceed five (5) years. The total fee for the contract term shall not exceed $95,000,000 for the life of the contract. Most task orders issued for this contract are for military construction or maintenance of small multidisciplinary projects with construction costs ranging from $1,000,000 to $5,000,000; some projects may be larger or smaller than this range. The A-E firms must be capable of managing multiple concurrent task orders. All Small Businesses, certified 8(a), HUBZone, Service-Disabled Veteran-Owned, Small Disadvantage, and Women- Owned Small Businesses are encouraged to respond. Upon review of industry response to the Sources Sought Notice, the Government will determine whether a set-aside acquisition in lieu of full and open competition is in the Government's best interest. This office anticipates award of a contract for these services by January 2028. The primary North American Industry Classification System (NAICS) Code for this procurement is 541330 – Engineering Services and the annual size standard is $25,500,000. THIS SOURCES SOUGHT NOTICE IS NOT A REQUEST FOR PROPOSALS. This notice is a market research tool used to determine the availability and adequacy of potential small business sources prior to determining the method of acquisition and issuance of an award. The Government is not obligated to and will not pay for any information received from potential sources as a result of this Sources Sought Notice. It is requested that interested small businesses submit to the Contracting Office a brief capabilities statement package (no more than 25 pages in length, single-spaced, 12-point font minimum including document searchable bookmarks) demonstrating your ability to perform the requested services. All potential offerors shall indicate their current Cybersecurity Maturity Model Certification (CMMC) level and the level they are likely to achieve by anticipated contract award date. Please use the attached Project Information Form for each project submitted demonstrating the requisite experience. The Sources Sought Project Information Form and Sources Sought Project Matrix shall be used to document a minimum of three (3) and a maximum of five (5) relevant design projects, completed in the past five (5) years from the sources sought response date, that best demonstrate experience on projects that are similar in size, scope, and complexity to the projects proposed for this IDIQ. This documentation shall address at a minimum, the following: 1. Relevant Experience: Relevant Experience to include design experience in performing efforts of similar size, scope and complexity within the last five (5) years. Include the project contract number, indicate if performed as the prime or subcontractor, final construction cost, new construction or renovation, Government/Agency point of contact and current telephone number, a brief description of how the contract relates to the technical services described herein and addresses how the project meets the scope/complexity requirements. The design projects submitted to demonstrate relevant experience shall include the following attributes: Size: Design of a construction project with a final construction cost of $1,000,000 or greater. At least one (1) project must have a final construction cost of $5,000,000 or greater. Scope and Complexity: Projects shall demonstrate specialized design experience in performance of services similar to those anticipated under this contract through experience with the following: Preliminary Design Deliverables for the Preliminary Design of DON MILCON projects to include a budget-ready DD Form 1391, cost estimate, facility planning data, and associated investigations or studies. Full design services and deliverables, for the development of comprehensive contract packages of Design-Build RFPs or Design-Bid-Build drawings, specifications, and construction cost estimates. Projects should consist of the new building design or the interior/exterior alteration or renovation of a building that includes multiple building systems. **Note: Projects submitted that only include utilities and horizontal or civil site work will NOT be considered relevan Characteristics: Additionally, submitted relevant projects shall demonstrate the following characteristics: Offerors shall have acted as the Design of Record (DOR) on all submitted projects. Relevant design experience with both new construction (at least one (1) project) and renovation (at least one (1) project). Relevant design experience with the preparation of Design-Build Request for Proposal (at least one (1) project). Relevant design experience with the preparation of the Design-Bid-Build (at least one (1) project). Demonstrated experience with Post Construction Award Services. Offeror’s experience performing as a subcontractor to DOR or lead design team will not be considered, nor will experience of companies proposed to work as subcontractors on the resulting solicitation/contract. 2. Workload and Availability: The ability of potential offerors to manage their firm’s present workload and availability of their project teams (including consultants) for the specified contract performance period. Potential offerors are requested to describe the workload/availability of their key personnel during the anticipated contract performance period and the ability of their firm to provide qualified backup staffing for key personnel to ensure continuity of services. General statements of availability/capacity may be considered less favorably. Most task orders issued for this contract are for military construction or maintenance projects with construction costs ranging from $1M to $5M; some projects may be larger or smaller than this range. The A-E firms must be capable of managing multiple concurrent task orders for comprehensive planning, design, and construction support services of projects. 3. Limitations on Subcontracting: Additionally, the Government will assess the firm’s ability to be compliant with FAR 52.219-14, Limitations on Subcontracting (DPCAP Class Deviation (CD) 2026-O0038). Potential offerors are requested to describe their plan to complete the work anticipated under this contract with qualified personnel. In addition to the continuity of service that satisfies the requirements of FAR 52.219-14 (e)(1) (DPCAP Class Deviation (CD) 2026-O0038) under which the contractor will not pay more than 50 percent of the amount paid by the Government for contract performance to subcontractors that are not similarly situated entities. A company profile shall also be included utilizing the attached Contractor Information Form. This will include the number of employees, office locations(s), UEI, CAGE Code, and statement regarding small business designation and status. Please note that if you are responding as an 8(a) Mentor-Protégé, you must indicate the percentage of work to be performed by the protégé. A copy of the SBA letter stating that your 8(a) Mentor-Protégé agreement is approved would be required with your proposal, if requested. The information provided in this notice is subject to change and in no way binds the Government to solicit for or award a contract. The Government will not provide debriefs on the results of this research, but feedback regarding the decision to set aside or not set aside the procurement will be accomplished via pre-solicitation synopsis or solicitation for these services as applicable. All information submitted will be held in a confidential manner and will only be used for the purpose intended. Points of contact listed may be contacted for the purpose of verifying performance. RESPONSES ARE DUE NLT 19 NOVEMBER 2026 at 2:00 PM (EDT). LATE SUBMISSIONS MAY NOT BE ACCEPTED. The package shall be sent via electronic mail to Angie Clifton at angela.j.clifton2.civ@us.navy.mil with the subject referencing solicitation number N4008527R0030. | 75% | Market Research | 11/19/2026 |
THIS IS A SOURCES SOUGHT SYNOPSIS FOR INFORMATION AND PLANNING PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) AND NO CONTRACT WILL BE AWARDED FROM THIS ANNOUNCEMENT. This Sources Sought Synopsis is being used as a market research tool to determine the availability and adequacy of potential qualified small business sources prior to determining the method of acquisition and issuance of a solicitation for architect-engineer services. All Service-Disabled Veteran-Owned Small Businesses (SDVOSB), Veteran-Owned Small Businesses (VOSB), Economically Disadvantaged Women-Owned Small Businesses (EDWOSB), Women-Owned Small Businesses (WOSB), Small Disadvantaged Businesses (SDB) certified under the Small Business Administration’s (SBA’s) 8(a) Business Development Program, Historically Underutilized Business Zone Small Businesses (HUBZone SB) certified by SBA, and all other small businesses are encouraged to respond. If you are a HUBZone or an 8(a) Small Business, please submit the SBA Certification Letter or contact information for assigned SBA Business Development Specialist. Responses to this notice will determine the feasibility and/or basis for the Navy’s decision to proceed with an acquisition. Information received in relation to this notice will be used to assist the Government in developing an overall acquisition strategy, including the type and number of contracts and use of small business concerns. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. Large business submittals will not be considered. NAVFAC Atlantic is seeking to identify potential sources with the capacity, experience and interest in competing for a contract for a Single Award Firm-Fixed Price (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) Architect-engineering (A/E) Contract for Environmental Planning and Engineering Services of an interdisciplinary nature for the implementation of National Environmental Policy Act (NEPA), Executive Order (EO) 12114, Environmental Effects Abroad of Major Federal Actions –Ship Homeporting and Related Operational Issues. The principal geographic area covered by this contract encompasses NAVFAC Atlantic's AOR, NAVFAC Pacific’s AOR and the adjacent waters of the Atlantic and Pacific oceans, including the Continental United States, the Caribbean, Europe, and North Africa. Additionally, tasks associated with this contract may be assigned anywhere in the world. The NAICS code for this proposed procurement is 541330 (small business size standard is $25.5 million). If the solicitation is issued, the solicitation will consist of a base period and four (4) one-year options totaling five (5) years of performance. The anticipated total work to be issued over the life of the contract via task orders (base year plus four one-year options) shall not exceed the estimated maximum amount of $75 million. The successful contractor to any forthcoming solicitation shall provide all labor, management, supervision, tools, materials, and all equipment necessary to perform the services listed below. The preponderance of the work under this contract shall involve the accomplishment of work in the following major categories, including but not limited to: The general scope of this contract requires engineering services, biological science, physical science, cultural resource, community planning, and military operations specialists. The engineers and community planners providing services under this contract must have competence attested by a licensor as a professional engineer or certified planner. The services required from the A-E firm or joint venture include, but are not limited to, architectural-engineering (A-E) or environmental services for the preparation of environmental planning documentation such as categorical exclusions (CATEX), environmental assessments (EAs), and environmental impact statements (EISs) under the National Environmental Policy Act (NEPA), environmental consultations and permits, as well as environmental reviews and environmental studies under EO 12114. The preponderance of the work under this contract shall be the preparation of various documents to support the proposed infrastructure-related actions with respect to ship homeporting issues. Examples of taskings required to complete this work may include analysis of port facility and infrastructure construction, renovation, and/or demolition; dredging; base realignment and closure (BRAC) actions; and proposed operational actions related to ship homeporting, waterfront activities and manned and unmanned asset activities. The contractor shall use the most up to date guidelines for preparation of the NEPA documentation. This includes Navy Instructions and the current version of the OPNAV 5090.1, Environmental Readiness Program, Marine Corps Instructions and the most current version of the P509.2, DoD Instruction 4715.11/12, and Department of War NEPA Implementing Procedures. Additionally, other tasks, studies, surveys, or documents may be required to complete the environmental planning documents including, but not limited to, environmental documentation for ship readiness and testing and training operations at the homeport locations and within Department of Defense-managed seaspace and Navy/Marine Corps training ranges, sketches, preliminary plans, cost estimates, descriptive text for future planning and work plans, modeling, geospatial analysis, information technology applications, traffics modeling and analysis, air quality modeling and analysis, noise modeling and analysis, encroachment analysis, and development and reproduction of a variety of public outreach materials of different media. For major testing and training exercises, the contractor shall be tasked with estimating marine mammal exposure from ordnance and sonar activities. In order to complete environmental planning documents in compliance with NEPA and EO 12114 and 12898, and in accordance with applicable DOD instructions, the contractor may be required to complete some of the following related studies and services to provide a comprehensive evaluation of the impacts to the environment: Air Conformity modeling and analyses under the Clean Air Act Air quality monitoring and testing Air quality management plans Coastal Consistency Determinations in accordance with the Coastal Zone Management Act Draft Letters of Authorization (LOA) and Incidental Harassment Authorization (IHA) applications Endangered Species Act Section 7 consultations, biological surveys, and Biological Assessments Essential Fish Habitat assessments In-water acoustic analysis Marine Mammal Density estimates Marine Resource Assessments Natural Resources surveys (species and habitat) Wetland delineation and mitigation plans (both wetland and near shore) National Historic Preservation Act (NHPA) and American Indian Tribe consultation support including cultural resource surveys (both architectural and archaeological), records management, and archaeological collection management/support Environmental permitting support Mitigation planning and support Socioeconomic analysis including Community Impact Studies and Environmental Justice Analyses Noise impact studies/modeling/monitoring (land and in-water) Noise analysis and the use of military aviation simulation model (NASMOD) Military Base Development Requirements to include Encroachment Action Plans for shore installations and at-sea operations and facility requirements analyses Range analysis to include documentation in support of Range Sustainability Environmental Program Assessments (RSEPA), Water RSEPA, Operational Range Clearance (ORC), Range Condition management Plans (RCMPs) Range containment modeling Fate and transport modeling and analysis Soil, sediment and water sampling Water quality studies to include chemical and physical analysis of dredge material and bioassays Toxic and hazardous waste studies (including Military Expended Materials) Health risk and toxicology analysis Storm Water Management studies Total Ownership Cost (TOC) or life cycle cost analysis Climate change and resiliency studies Greenhouse gas accounting and analysis Glint and glare modeling and analysis Hydrology and erosion studies Construction feasibility studies including slope, terrain, soils, watersheds, and seismic hazards Renewable energy feasibility studies Utility capability assessments and feasibility studies (electric, gas, sewer, and water) to support design plans Air Installation Compatibility Use Zone (AICUZ) studies Range Air Installation Compatibility Use Zone (RAICUZ) studies Safety analyses (Surface Danger Zones, Impact Zones, Accident Potential Zones, Clear Zones, and Danger Zones) Integrated Natural Resource Management Plans (INRMPs) and INRMP updates Integrated Cultural Resource Management Plans (ICRMPs) and ICRMP updates Modeling to determine tidal or sea-level rise impacts to shore lines and structures Geospatial analysis and map generation in accordance with current guidance Estimates of dredge and fill sediment volumes Hazardous waste reporting and analysis (i.e. EPCRA) Land Use Compatibility plans Development of water and air quality management requirements Construction design plans Traffic and transportation analysis, studies, and roadway designs Public involvement and outreach support Public participation planning and implementation Translation services for CATEX/EA/EIS and Public Notices Environmental Condition of Property (ECP) Literature reviews Watershed planning Installation master plans The contract requires the selected firm to have online access to e-mail via the Internet for routine exchange of correspondence. Statement of Capabilities Submittal Requirements: The Statement of Capability (SOC) will determine the feasibility and/or basis for the Navy’s decision to proceed with acquisition. Interested firms must submit a SOC, which describes, in detail, the firm’s capability of providing these services at various Military and other Federal facilities worldwide. Your Statement of Capabilities shall include the following: Company Profile Full name and address of the firm Point of Contact with position title, telephone number, and e-mail address Year firm was established Office location(s) Indication of System for Award Management (SAM) registration Unique Entity ID and CAGE Code Briefly describe your Federal contracting experience including locations at which your company has performed services similar to those described in this sources sought. Has your firm performed work in these locations? Number of employees and average annual receipts based on the last three (3) fiscal years Small Business Designation (include all socioeconomic categories) The Government will evaluate sources’ capabilities based on the following: 1. Prime and Key Consultants’ recent experience (within the last five years) with regard to the services listed above, knowledge of pertinent regulations, and experience working in a diverse geographical area(s). Provide up to five project examples within the past five years that demonstrate this experience. Provide the following information for each project listed: a. Contract number and project title; b. Name of contracting activity; c. Administrative Contracting Officer’s name and current telephone number; d. Contracting Officer’s Representative or primary point of contact name and current telephone number; e. Contract type (e.g., cost plus, requirements, firm fixed-price, indefinite delivery/indefinite quantity, or combination); f. Period of performance (start and completion date); g. Basic contract award amount and final contract value; h. Summary of contract work. i. If award fee or award term incentivized, average performance rating received. 2. Professional qualifications and capabilities of the staff to be assigned to the resulting contract; include experience within the past five years in the types of work addressed above. Firms will be evaluated in terms of their staff’s active professional registration, role expected to play in this contract, and roles played in the projects addressed in item 1 above. 3. Provide a brief description on the management plan for this contract; in particular, illustrate management’s approach/plan for managing multiple concurrent task orders for this contract and personnel roles in the organization. 4. If you are considering entering into a teaming arrangement, provide the name of all teaming partners and the anticipated type of teaming arrangements, address the anticipated services each member will provide, include applicable professional qualifications and experience for each member and to what extent your firm has worked with proposed subcontractors in the past. For other than bundled requirements, you may be able to joint venture with one or more small businesses and not be considered affiliated as long as each member of the joint venture is small under applicable NAICS code (13 CFR 121.103(h)(3)). If the procurement is ultimately set aside for small businesses, the small business prime will be required to comply with FAR 52.219-14, which states that at least 50% of the cost of contract performance incurred for personnel shall be expended by employees of the concern. Provide evidence that, on past contracts of similar nature, your firm (as prime contractor) was able to comply with requirement FAR 52.219-14 and will be able to comply with this requirement under the proposed contract. It is requested that interested firms submit a brief SOC to demonstrate the ability to meet and execute the requirements as set forth below. The SOC must be complete and sufficiently detailed to allow for a determination the firm’s qualifications to perform the defined work. The SOC must be formatted on Letter size (8.5x11 inch) paper, single spaced, Times New Roman, 12-point font minimum and is limited to twenty (20) single sided pages (including all attachments). Responses are due on Friday, 27 November 2026, by 11:00 AM EST. The package shall be sent electronically to erica.n.sears.civ@us.navy.mil. Questions or comments regarding this notice may be addressed to Erica Sears by e-mail at erica.n.sears.civ@us.navy.mil. LATE RESPONSES WILL NOT BE ACCEPTED. The Government will not provide a debriefing on the results of this notice. All information submitted will be held in confidential manner and will only be used for the purpose intended. | 75% | Market Research | 11/27/2026 |
***THIS REQUIREMENT IS BEING SOLICITED TO SEAPORT-NXG MAC HOLDERS ONLY. No other offers will be considered. SeaPort MAC holders will need to register for PIEE accounts in order to receive solicitations and submit proposals/offers***This requirement includes research, development, test, evaluation, engineering, and fleet support for Navy ships, submarines, military watercraft, Military Sealift Command vessels, and unmanned vehicles of NSWCPD Division 33. Division 33 also serves as the NAVSEA-assigned ISEA for non-aviation Chemical/Biological Defense (CBD) Individual Protective and Decontamination Systems and Equipment. This requirement specifically supports NSWCPD Codes 335 and 336 in performing their ISEA responsibilities for the four functional areas listed above. Services include developing design policy, equipment and system specifications and standards, and doctrine, as well as providing logistics and engineering support. The deadline for receipt of questions is 10 days after issuance of the solicitation. Although every effort will be made, the Government makes no guarantee that questions received after the date above will be answered. All questions shall be submitted via email to the points of contact listed below: Tiffany Vu, Contract Specialist: tiffany.o.vu.civ@us.navy.mil and Angela Cusati, Contracting Officer: angela.f.cusati.civ@us.navy.mil | 65% | Solicitation | 12/14/2026 |
REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT ANNOUNCEMENT DEPARTMENT OF THE NAVY Program Acquisition Executive Mission Systems (PAE MS) Capability Portfolio Executive Combat Systems & Fires (CPE CS&F) Integrated Combat System (ICS), PMW 630 SECTION 1: GENERAL INFORMATION Document Type: Request for Information (RFI) / Sources Sought Notice Solicitation / Reference Number: N6175027R1201 Contracting Activity: Navy PAE Mission Systems, Washington Navy Yard, DC Program Title: Surface Ship ICS Engineering and Integration North American Industry Classification System (NAICS) Code: 541330 – Engineering Services (Military and Aerospace Equipment and Military Weapons) Product Service Code (PSC): AC13 – R&D: Defense Systems: Weapons / R425 – Support - Professional: Engineering/Technical Response Due Date: 04 December 2026, 15:00 EST Classification Level: Primary document UNCLASSIFIED. Classified responses or annexes up to SECRET / NOFORN handled by separate coordination (see Section 7). SECTION 2: STATUTORY DISCLAIMER & SPECIAL NOTICE This RFI is issued solely for information and planning purposes in accordance with FAR 15.101(c). This notice does not constitute a Request for Proposal (RFP), Invitation for Bid (IFB), or an announcement of a forthcoming solicitation. Issuance of this notice does not obligate the Government to issue a formal solicitation or award a contract. The Government will not pay or reimburse any costs incurred by respondents in preparing, submitting, or demonstrating information in response to this notice. All submissions become Government property and will not be returned. Participation in this RFI is voluntary. Failure to respond will not preclude a vendor from participating in any future competitive acquisition, should one be released. Respondents may submit capability statements addressing any subset or all of the focus areas detailed herein. SECTION 3: BACKGROUND & PROGRAM CONTEXT 3.1 Background & Context Modern surface warfare requires rapid, modular capability delivery across the Navy's surface fleet. The Navy’s ICS program is making this vision a reality through use of virtualization, Kubernetes orchestration, and development of a common suite of mission applications enabling a "build once and deploy across the fleet" methodology for delivery of capability to frigates, destroyers, amphibious ships, aircraft carriers, future manned and unmanned vessels, and future foreign military sales vessels. The ICS program is conducting market research to identify industry partners capable of executing comprehensive systems engineering and software integration for U.S. Navy surface combat systems. This scope is currently being executed under the N00024-23-C-5117 contract awarded to Lockheed Martin Rotary & Mission Systems in September 2023. 3.2 Technical Scope & Baselines The technical scope spans current and next-generation baseline configurations running incremental deliveries of the Integrated Combat System (ICS) software stack (infrastructure services and tactical platform services) and common mission applications. Applicable ship deliveries include the following: ICS-Enabled AEGIS Combat System Baselines 9.C3+ and Baseline 10.1+ running on Mk6 Mod0/1 hardware with IaaS ORDALT or on Mk6 ModX hardware ICS-Enabled Ship Self-Defense System (SSDS) platforms FF(X) 3 and follow DDG 1000 class in line with delivery of the Zumwalt Enterprise Upgrade Solution (ZEUS) Future USN and FMS platforms SECTION 4: TECHNICAL REQUIREMENTS & CAPABILITY AREAS SOUGHT The Navy seeks detailed technical capabilities, corporate competencies, and innovative methodologies across eleven (11) functional areas. Vendors may respond to any or all of the following scope areas: Focus Area 1: Programmatic Engineering, Configuration Management & Governance Configuration Management (CM): Formulating, baselining, and executing Configuration Management Plans (CMP), software build/release planning, Configuration Control Boards (CCBs), and tracking and adjudicating Software Change Requests (SWCRs). Programmatic & Systems Planning: Developing, maintaining, and synchronizing project-level Roadmaps, Integrated Master Schedules (IMS), and capability delivery cadences. Focus Area 2: Systems Engineering & Requirements Architecture Technical Baseline Artifacts: Developing, updating, and managing formal engineering artifacts: Systems Engineering Plans (SEP). Software Development Plans (SDP) utilizing modern Agile/DevSecOps frameworks. System / Subsystem Definition Documents (SSDD). System / Subsystem Specifications (SSS). Software Product Specifications (SPS). Interface Requirements Specifications (IRS). Requirements Traceability Verification Matrices (RTVM) maintaining end-to-end bidirectional requirement-to-test traceability. System Safety Plans (SSP) conforming to MIL-STD-882E and naval weapon safety requirements. Requirements Allocation: Decomposing ICS, AEGIS, SSDS, and future combat system Top Level Requirements (TLR) into modular capability building blocks and subsystem specifications across surface ship classes (DDG 51, CG 47, FF(X), DDG 1000, L-Class, CVN, unmanned surface vessels, FMS variants, future platforms). Technical Leadership: Serving as lead technical authorities in Integrated Product Teams (IPTs), Working Groups (WGs), formal milestone reviews (SRR, PDR, CDR), and leading Technical Interchange Meetings (TIMs) to define and allocate interface requirements. Force-Level Mission Thread Analysis: Evaluating complex, distributed kill-chain mission threads, establishing functional allocations, and resolving tactical latency challenges. ICS Re-Architecture & Model-Based Systems Engineering (MBSE): Authoring SysML/UML MBSE models and leading modular product development across the ICS Domain Architecture. Sensor Management. Vehicle Management. Information Management. Training Management. Tactical Decision Management. External Communications Management. Weapon Management. Display Management. Infrastructure Services. Focus Area 3: Fleet Data Analysis, Feasibility Studies & Gap Assessment Conducting engineering feasibility studies, system performance assessments, and trade studies for capability insertion across diverse ship classes and configurations. Extracting, parsing, and analyzing live fleet exercise data, weapon telemetry, and real-world tactical events to identify performance anomalies and drive capability enhancement. Assessing combat system shortfalls, bottlenecks, and operational gaps, and designing/evaluating candidate architectural and software modifications to close these gaps. Focus Area 4: Tactical Software Design, Coding, Testing, and Integration Combat System Design activities including analysis and algorithm development Mission software development, unit testing, and component integration. Cloud-based and Hardware-in-the-Loop (HWIL)-based testing to include element integration, subsystem testing, and system testing System Integration: Engineering and integrating software interfaces for specific sensor, weapon, and C2 programs and capabilities, including but not limited to: Patriot Advanced Capability-3 Missile Segment Enhancement (PAC-3 MSE) The Standard Missile (SM) Family of weapons (including all Air Defense, Ballistic Missile Defense, and Extended Range Active Missile variants) MK-41 VLS-compatible canister-launched weapons (including Evolved SeaSparrow Missile (ESSM), Tomahawk Land Attack Missile (TLAM), and Vertical Launch ASROC (VLA) Rolling Airframe Missile (RAM) Electronic Warfare (EW) systems Phased array and rotating radar systems Evolving to common track management solution across AEGIS and SSDS configurations Containerized payloads Tactical Virtualization Configurations: Designing, provisioning, benchmarking, and troubleshooting virtualized tactical hardware/software configurations and hypervisor-to-bare-metal runtime environments. Focus Area 5: Hardware/Software Tech Stack, Microservices & System-of-Systems Integration Third-Party Software & Microservices: Evaluating commercial and third-party software products, conducting compliance refactoring, and defining standardized, ICS-compliant APIs to support microservices orchestrated via Kubernetes. Hypervisor Integration: Integrating and tuning alternate hypervisors (e.g., VMware ESXi, KVM, bare-metal container engines) to meet strict real-time deterministic performance requirements. Full-Stack System-of-Systems (SoS): Ensuring the integrated tech stack (hardware compute blades, switching fabric, hypervisors, orchestrators, microservices, and tactical applications) fulfills holistic combat system operational requirements. Leading technical forums to establish cross-contractor deliverable interfaces, lead-ship integration agreements, and deployment schedules. Focus Area 6: Modeling & Simulation (M&S) Developing, maintaining, validating, and updating high-fidelity simulations and functional simulators. Conducting system-level, ship-level, and force-level performance simulations, radar cross-section/propagation trade studies, and engagement dynamics modeling to validate tactical algorithms. Focus Area 7: Cybersecurity Engineering, IA & Program Protection Cyber Systems Engineering: Refactoring heritage combat system code to contemporary cybersecurity baselines, integrating modern defensive cyber tools, and ensuring zero loss of tactical capability during cyber retrofits. Information Assurance (IA) Compliance: Enforcing DoD, DoN, and NAVSEA security policies; documenting DoD Instruction (DoDI) 8510.01 Risk Management Framework (RMF) security controls. Model-Based ATO & Cross Domain Solutions: Supporting technical reviews and data calls for Cross Domain Solutions (CDS); driving the transition to model-based RMF Authorization to Operate (ATO) artifact generation. Vulnerability Scanning & Red Team Support: Executing continuous vulnerability management (ACAS, SCAP), static/dynamic code analysis (e.g., SonarQube, Fortify), supporting Red Team assessments, and implementing automated STIG remediation workflows. Program Protection & Fleet Readiness: Authoring Program Protection Plans (PPP); identifying fleet cyber operational and response training shortfalls and recommending tooling enhancements; leading Cyber TIMs with Participating Acquisition Resource Managers (PARMs). Focus Area 8: Verification, Validation & Automated Testing Automated Test Architecture: Authoring test strategies, detailed verification plans, and scripts emphasizing automated testing across unit, component, capability, and system levels. Multi-Tier Testing Execution: Executing and supporting testing to include unit/component testing, integration testing, multi-element integration testing, regression testing, stability testing, functional, system test and evaluation, and fleet acceptance testing. Certification & Maintainability: Supporting government-led maintainability evaluations. Defining, capturing, and verifying Objective Quality Evidence (OQE) to support formal combat system certification. Defect Adjudication: Verifying software problem resolutions and supporting hardware failure reporting, analysis, and corrective action systems (FRACAS / Trouble Reporting). Focus Area 9: Land-Based Test Site & Shipboard Installation Support Land-Based Test Site (LBTS) Engineering: Providing on-site systems engineering, software loading, and live test support at locations including the Combat Systems Engineering Development Site (CSEDS) in Moorestown, NJ; and Surface Combat Systems Center (SCSC) in Wallops Island, VA. Major Test Events: Preparing for and executing critical test events at land-based ranges and on underway ships. Shipboard Installation: Executing shipboard installation across naval shipyards and bases, including software infrastructure installation, tactical software installation, network configuration, interface checkout, and combat system light-off. Focus Area 10: Fleet Training Systems & Instructional Design Performing Job Duty Task Analysis (JDTA) and Front End Analysis (FEA) to define sailor instructional requirements for modernized tactical systems. Developing, maintaining, and updating training curricula, student guides, and tactical job aids. Executing and coordinating factory, pilot, and schoolhouse training courses across Surface Combat Systems Training Command (SCSTC) locations. Focus Area 11: Technical Documentation & Interactive Manuals (IETMs) Modernizing traditional technical publication pipelines toward dynamic, S1000D-compliant Interactive Electronic Technical Manuals (IETMs) and Quick Reference Guides (QRGs). Providing technical writing support to translate complex software architectures and engineering data into standard operating procedures and maintenance manuals. Investigating, adjudicating, and incorporating fleet-submitted Technical Manual Deficiency / Evaluation Reports (TMDERs). SECTION 5: INSTRUCTIONS TO RESPONDENTS & QUESTIONNAIRE Interested industry partners are requested to submit responses organized into the following four (4) distinct parts: Part 1: Corporate Profile & Administrative Information (Max 3 Pages) Administrative Data: Company Name, Commercial and Government Entity (CAGE) Code, Unique Entity Identifier (UEI), physical address, website, and designated Points of Contact (POC) for technical and contractual matters. Business Size & Socioeconomic Status: Business classification under NAICS 541330; small business designations (e.g., Small Business, 8(a), HUBZone, SDVOSB, WOSB). Facility & Personnel Clearances: Current Facility Security Clearance (FSL) level; Secret/Top Secret safeguarding capability; availability of cleared key personnel. Existing Contract Vehicles: Active prime contracts (e.g., SeaPort-NxG, GSA OASIS/MAS, or agency-specific MACs) suitable for this scope. Part 2: Technical Approach, Scope Competency & Innovation (Max 25 Pages) Respondents must address their specific competencies, technical approaches, and innovative capabilities against the requirements in Section 4. Vendors may respond to any or all of the functional areas. Scope Coverage & Technical Competency: Clearly delineate which of the eleven (11) Focus Areas your organization has the core capability to execute (as a prime or via teaming). Detail your technical approach, corporate experience, and past performance (within the past 5 years) supporting AEGIS, SSDS, ICS re-architecture, modern weapon and sensor integration, and other real-time / mission-critical engineering and integration efforts. Super Intelligence (SI) & Advanced Automation Integration: Describe your organization's specific technical approach to utilizing SI and generative/agentic tools. Provide concrete examples or proposed concepts where SI can be applied across the lifecycle—such as automated test script generation and test execution, automated code refactoring, telemetry and fleet data anomaly detection, MBSE artifact generation, cyber vulnerability triage/STIG scanning, or dynamic IETM/training curriculum updates. Virtualization Experience: Detail your experience deploying workloads in virtualized and Kubernetes- orchestrated environments; abstracting hardware dependencies; and integrating mission critical software in environments demanding high reliability and low latency. Part 3: Industry Barriers to Entry & Risk Identification (Max 5 Pages) The Navy is committed to fostering competition, removing friction, and accelerating delivery timelines. Respondents are requested to identify: Technical & Resource Barriers: Identify key barriers to entry, technical hurdles, or constraints that may prevent your firm from successfully performing any of the 11 focus areas identified above, within required delivery timeframes (e.g., specialized software/hardware tool access, facility/lab access, proprietary interfaces, legacy codebase familiarity). Government Furnished Information / Property / Computer Programs (GFI/GFE/GFCP): Specific GFI, GFE, GFCP; developer environment credentials; test facility availability required to de-risk onboarding and ensure parity. Personnel & Security Bottlenecks: Security clearance onboarding latency, specialized labor skill shortfalls, or site access restrictions that present schedule risks, along with suggested government mitigation strategies. Part 4: Acquisition Strategy, Contract Structuring & ROM (Max 7 Pages) Contract Type & Structuring Recommendations: Provide industry perspectives and recommendations on optimal contract type (e.g., Cost-Plus-Fixed-Fee, Cost-Plus-Incentive-Fee, Firm-Fixed-Price) and acquisition approach (e.g., Other Transaction Authority (OTA), FAR-based contract, Multiple Award Contract Indefinite Delivery / Indefinite Quantity (MAC IDIQ)). Additionally, address how technical scope could be performed under fixed-price, outcome-based contract line items, along with any perceived risks and tradeoffs of this approach. Discuss how Contract Line Item Numbers (CLINs) or Task Areas should be structured to balance agile, iterative software delivery to Fleet with traditional milestone-driven waterfront installations and systems engineering documentation. Recommend incentive structures (e.g., award fees tied to automated test coverage, escaped defect reduction, or schedule acceleration) that align industry motivation with Navy operational velocity. Teaming & Subcontracting: Proposed teaming arrangements, joint ventures, or specialized subcontractors to cover the multi-disciplinary scope. SECTION 6: SUBMISSION GUIDELINES Format: Submissions must be delivered in searchable Adobe PDF or Microsoft Word format. Standard 8.5 x 11-inch layout, 1-inch margins, minimum 11-point font (graphics, tables, and architectural diagrams may use minimum 9-point font). Total submission must not exceed 40 pages across all four parts (excluding Title Page, Table of Contents, and Acronym Table). Delivery Instructions: Responses must be submitted via email to the Contracting Officer and Contract Specialist listed below with the subject line: "Response to RFI [N6175027R1201] - Surface Combat Systems Engineering and Integration - [Company Name]". For attachments exceeding 10MB, respondents must coordinate secure file delivery via the DoD SAFE application (https://safe.apps.mil/). Submission Deadline: All responses must be received no later than 04 December 2026, 15:00 EST. SECTION 7: PROPRIETARY MARKINGS & SECURITY HANDLING Proprietary Markings: If a response contains business-sensitive, trade secret, or proprietary information, it must be explicitly marked on each page. The Government will protect properly marked data from unauthorized disclosure. Non-Government Evaluators: The Navy may utilize Federally Funded Research and Development Centers (FFRDCs) and System Engineering and Technical Assistance (SETA) contractors to assist in reviewing responses. All support personnel are bound by non-disclosure agreements (NDAs) and organizational conflict of interest (OCI) rules. Respondents wishing to establish proprietary information agreement(s) with non-Government evaluators must clearly declare this in their Part 1 submission. Responses must be UNCLASSIFIED. SECTION 8: GOVERNMENT POINTS OF CONTACT Contracting Officer: Name: Ryan Brophy Email: ryan.p.brophy.civ@us.navy.mil Command: Navy PAE Mission Systems Contract Specialist: Name: Ashley Mathew Email:ashley.mathew2.civ@us.navy.mil Command: Navy PAE Mission Systems Program Office Representative: Name: Rick Jandrain Email:richard.r.jandrain.civ@us.navy.mil Command: Navy PAE Mission Systems, PMW 630 | 62% | Market Research | 12/04/2026 |
Additional Details
Solicitation Number
N4019214R0001
Archive Date
Oct 21, 2016