GovChime
Notice ID: 2c9c11519c7a4d9892c5e33f0c501157Solicitation

Cask Maintenance and Transportation Services

Archived on April 6, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−04:00
Posted
March 12, 2024
Notice type
Solicitation
NAICS
811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Agency
Department of WarDepartment of the Navy

Notice details

Office
NORFOLK NAVAL SHIPYARD GF
Place of performance
Portsmouth, VA, 23709
Last updated
Dec 4, 2025

Identifiers

Solicitation number
N4215824RE001
Notice ID
2c9c11519c7a4d9892c5e33f0c501157

Description

The purpose of the attached Amendment 1 for RFP N4215824RE001 is to modify the table under Section 4.5 in Factor IV - Price (Volume IV) within 52.212-1 Instructions to Offerors - Commercial Items (Addendum). The RFP's closing date has not been extended and remains 22 March 2024 at 10:00 AM Eastern Time. RFP N4215824RE001 is for Cask Maintenance Services in accordance with the Performance Work Statement within the RFP. Please note that the RFP's closing date is Friday, 22 March 2024 at 10:00 AM Eastern Standard Time. Contractor Questions in regards to RFP N4215824RE001 shall be submitted in accordance with Paragraph 1.1 "Questions" (within the Section "Addendum to 52.212-1 in Commercial Solicitations" no later than Monday, 04 March 2024 at 10:00 AM Eastern Standard Time. Please fill out the chart in accordance with Paragraph 4.4 "Factor III - Small Business Participation Plan (Volume III)" (within the Section "Addendum to 52.212-1 in Commercial Solicitations". If it is not applicable, please note that it is not applicable.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N4215824RE001
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationDec 13, 2023

    Cask Maintenance

    Notice 66232594915f445d8e17d5a346130c07 on SAM.gov

  2. 2×
    SolicitationCurrentFeb 20, 2024

    Cask Maintenance and Transportation Services

    Notice 2c9c11519c7a4d9892c5e33f0c501157 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SOLICITATION Solicitation Notice: N4215827Q0003 This is a solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. The RFQ number is N4215827Q0003. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2026-01 and DFARS Change Notice. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The full text of the clauses may be accessed at the following website: https://www.acquisition.gov/far/ This acquisition is a Total Small Business Set-Aside under FAR Part 19. The applicable NAICS code is 811310, with a size standard of $12.5 million. The PSC is J039. Request for Response: Norfolk Naval Shipyard requests a service contract to perform Maintenance (PM) procedures on each of the Norfolk Naval Shipyard (NNSY). Specified within this Statement of Work (SOW). Delivery Location: Norfolk Naval Shipyard The solicitation will close on November 18, 2026, at 5:00 PM. The expected performance period includes a base year and option periods, which are as follows: Site Visit: Read and understand the instructions on Site visitation in accordance with NAVSEA Clause L-237-W001. It is important to attend this event on Thursday November 12, 2026, 0900-Till complete AM Eastern Time Period of Performance: Base Year: 20 NOV 2026 – 19 NOV 2027 Option 1: 20 NOV 2027 – 19 NOV 2028 Option 2: 20 NOV 2028 – 19 NOV 2029 Option 3: 20 NOV 2029 – 19 NOV 2030 The following forklifts that will be serviced: Three D35C-9 forklifts Two D80S-9 forklifts Maintenance Schedule Chart: See Statement of Work (S.O.W) Delivery Each Offeror shall provide confirmation of its ability to deliver all required services for the estimated period of performance. Each Offeror shall provide all‑inclusive pricing for all services and parts required for completion during the period of performance. INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS This requirement will be prepared and evaluated in accordance with FAR Part 12, Acquisition of Commercial Products and Commercial Services, and FAR Subpart 12.6, which prescribes streamlined solicitation and evaluation procedures for commercial item acquisitions. This solicitation will be issued as a Request for Quote (RFQ)-(Pages 13 and 14 have been intentionally removed from RFQ) . Offeror shall submit quotes demonstrating the ability to meet all requirements described in the Statement of Work (SOW) and all terms and conditions included in the RFQ. Quotes will be evaluated based on the factors identified in the Evaluation Criteria section. The Government may award a contract without discussion; therefore, Offerors are encouraged to submit their best terms in their initial submission. Quotes must include: Technical-to meet commercial item requirements Pricing information consistent with FAR 12 standards Past Performance: The Government will evaluate the Offeror’s relevant past performance to determine its level of confidence in the Offeror’s ability to successfully perform the required services. Support & Maintenance Experience — Demonstrated experience providing the labor, materials, services, and equipment necessary maintenance to this make and model of forklifts The Offeror shall provide no more than two (2) past performance examples completed within the past 24 months that demonstrate relevant experience Representations and certifications required by FAR 12.301 Any additional information requested in the RFQ The Government intends to make an award to the Offeror whose quote represents the best value to the Government, considering price and nonprice factors. EVALUATION CRITERIA – COMMERCIAL PRODUCTS & COMMERCIAL SERVICES The Government will evaluate quotes in accordance with FAR Part 12, using streamlined commercial item procedures. Award will be made to the Offeror whose quote represents the best value to the Government. Technical acceptance will be determined based on the Offeror’s demonstrated ability to fully comply with the requirements of the Statement of Work (SOW). In accordance with FAR principles, the Government will evaluate the extent to which the Offeror’s quote reflects a sound approach, a clear understanding of the requirements, and the capability to successfully perform the work. The Government’s evaluation will consider: Technical Capability/Compliance with SOW Requirements — The degree to which the proposed technical solution meets or exceeds all stated SOW tasks, deliverables, and performance standards. Past Performance: Because this requirement involves service and maintenance, the Offeror must demonstrate experience performing work of similar scope, size, and complexity, including Price: will not be the sole factor in the selection process. However, should prospective vendors be deemed equal across all specified evaluation criteria, price may serve as the determining factor in awarding the contract Compliance Requirement-Proposal Submission: All proposal submissions must be complete, accurate, and received by the stated deadline. Any incomplete, late, or partial submission shall result in the vendor being automatically disqualified from further consideration. It is the responsibility of each Offeror to ensure full compliance with all solicitation instructions and submission requirements. Please limit submission to no more than 10 pages. All responsible vendors may submit proposals. By submitting, vendors certify they are not suspended, debarred, or otherwise ineligible for federal contracts. Awardees must maintain SAM registration throughout contract performance. Questions: Submit all inquiries per solicitation instructions by the deadline of November 16th at 9:00am. Foward questions to and RFQ submissions to eugene.e.fenner.civ@us.navy.mil. For SAM registration assistance, call 1-866-606-8220 or visit www.sam.gov. L-237-W001 PREBID/PREPROPOSAL SITE VISIT (NAVSEA) (DEC 2018) (a) The Contracting Officer will conduct a site visit at Norfolk Naval Shipyard Bldg. All prospective offerors are urged to attend this site visit. Offerors attending the site visit will meet at the following time and location to be escorted to the site: Date: Thursday November 12th, 2026 Time: 09:00 am Location: Parking is available at the Pass and ID office located at Gate 15 on George Washington Highway Portsmouth, VA 23709. Please bring a state driver’s license or any state issue identification. Individuals without an ID will not be permitted on base. Please note that masks are not required. Only one (1) representative per company will be allowed to attend. If you already have base access and a Red or Yellow Badge, you are required to submit your Identification number listed on the badge. Coordinate with eugene.e.fenner.civ@us.navy.mil. If you would like to attend or have questions. IMPORTANT You MUST bring with you to the site visit two (2) of the following: (Failure to do so will result in an inability for you to access the site) Vaild and current Driver’s License Valid and current United States issued passport Valid and embossed Birth Certificate (b) Offerors who plan to attend shall submit a visit request at least 2 days prior to the visit. Offerors shall comply with the base access requirements specified elsewhere specified in the solicitation to gain access to the site. (c) A copy of the visit request shall be forwarded to the Contract Negotiator via e-mail at eugene.e.fenner.civ@us.navy.mil (d) Offerors shall not ask questions relative to the solicitation during the site visit. All questions shall be submitted as specified elsewhere in this solicitation. (e) Attendees shall abide by the following rules: (1) No cameras, tape recorders, or other reproduction devices are allowed. Cell phones with camera capability are permitted in unclassified areas only. The WiFi and Bluetooth must be disabled. No photography is permitted at any time. No hard copies of any Government documents (maps, hand-outs, etc.) shall be provided to offerors. Offerors are restricted to notetaking. (2) No explanation, remarks, or replies made by Government representatives in response to any inquiries during the Site Visit shall be construed as changing the terms or conditions of the solicitation. The definitive treatment of any such problems or questions shall be by formal solicitation amendment. Only the Contracting Officer can change the solicitation requirements. (3) Each visitor shall be required to sign in and sign out on the visit and must stay with the site visit group at all times. No other meetings or discussions with Government personnel shall be permitted. (4) The Government reserves the right to inspect all material, briefcases, etc., entering or leaving Government facilities. (5) Only advance substitutions of offeror personnel are permitted. OFFERORS NOT COMPLYING WITH THESE RULES AND PROCEDURES MAY BE PRECLUDED FROM FURTHER SITE VISIT PARTICIPATION. (End of provision)
68%
Solicitation11/18/2026
The Contracting Department, NAVSUP Fleet Logistics Center (FLC), Norfolk, VA, intends to negotiate a single award, cost plus fixed fee (CPFF) indefinite delivery, indefinite quantity (IDIQ) contract under FAR Part 15 “Contracting by Negotiation”. Naval Supply Systems Command [NAVSUP] Fleet Logistics Center – Norfolk [FLC-N] requires Logistics Support Services to perform lubrication, maintenance, repair, overhaul actions [with full parts support] and transportation movement on Shipboard and Shore-based Material Handling Equipment [MHE] and Shipboard Mobile Support Equipment [SMSE]. MHE is defined as all self-propelled equipment normally used in storage and handling operations in and around warehouses, shipyards, industrial plants, airfields, magazines, depots, docks, terminals and aboard ships. It includes, but is not limited to, all self-propelled MHE such as warehouse tractors, forklifts of various Equipment Condition Codes [ECC], platform trucks, pallet trucks, 463L aircraft loaders and automated material handling systems. It also includes non-powered shipboard pallet trucks. SMSE includes, but is not limited to, container handlers, mobile shipboard cargo cranes, shipboard aerial work platforms, telescopic boom lift trucks, scissor-lift platforms, diesel conveyor vehicles and flight deck scrubbers [FDS].Similar services are currently being provided by Fleet Support Group under contract N00189-15-D-0031. The North American Industry Classification System (NAICS) code for this acquisition is 811310, Machinery and Equipment Maintenace with a size Standard of $8.0M. After analyzing submittals received in response to a Sources Sought notice, the prospective Request for Proposal (RFP) will be processed utilizing “Full and Open Competition” and will require a Small Business Subcontracting Plan. The resulting contract will be for a five (5)-year ordering period. FAR 52.217-8 “Option to Extend Services” will be included in the solicitation and contract. The option will be evaluated in accordance with FAR 17.206(a). A complete RFP package will be available by downloading the documents at the beta.SAM Website as follows: beta.SAM.gov on or around 1 March 2021. Potential contractors are hereby notified that the solicitation and subsequent amendments to the solicitation will ONLY be available for download at the above site; this office will NOT issue hard copy solicitations. By submitting an offer, the vendor is self-certifying that neither the requestor nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the offer. By submission of an offer, the contractor acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from this solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make a contractor ineligible for award. Contractors may obtain information on registration and annual confirmation requirements via the Internet at https://www.sam.gov. Please direct all questions regarding this requirement via e-mail to the POC identified in this synopsis.
68%
Pre-SolicitationOpen
Norfolk Naval Shipyard (NNSY) CVN Industrial Repair Contracting Division (C432) is conducting a market survey to determine the availability of Scheduled Maintenance Services for Doosan Forklift. The model types are: 1) (Three) Doosan D355C-9 Forklifts and 2) (Two) Doosan D80S-9 Forklift. These forklifts are owed by NNSY for daily operation in the Shipyard. The purpose of this notice is to conduct Market Research in accordance with Federal Acquisition Regulation (FAR) Part 10 to identify vendors who are capable and would be interested in the above-described requirement. The government is requesting a contractor with experience and license to service these forklifts to ensure safe operation, compliance with manufacturer recommended services, and effective maintenance planning. This request for information is for contractors to recommend the specific types of services for these model forklifts. Specifically provide schedule intervals based on either operational hours or calendar intervals. Provide recommended parts replacements etc. The maintenance schedule provided shall be used to develop a better solicitation and create CLIN structure for a base contract and option years CLINs. This is not a formal solicitation; a solicitation shall be issued based on response received from this RFI. The NAICS Code for this requirement is 811310, Commercial and Industrial Machinery and Equipment, and the Small Business Size Standard is $12.5. The proposed contract is anticipated to be a Firm Fixed Price (FFP), base and four-year Options type contract. The period of performance for this requirement will be a 12-months base year and four one-year option periods. This contract is estimated to begin on November 20, 2026. Responding contractors shall provide relevant past performance on same/similar work dating back 2 years and capability statement detailing their technical expertise in the equipment types. The capabilities statement must be presented in sufficient detail for the Government to determine that your company possesses the necessary equipment area, expertise and experience. All submissions shall be in a PDF format. Submissions are not to exceed six (6) typewritten pages and shall be prepared in no smaller than 10-pitch, single-spaced with no less than a one-inch margin on all sides. Also, please indicate if your company can be a prime contractor for this effort or, if not, whether your company can be a subcontractor. Reponses to this Request for Information should reference N42158-27-SIMACQ-5000004_RFI_MAINTENANCE and shall be submitted electronically to Eugene Fenner at eugene.e.fenner.civ@us.navy.mil. no later than 07:00 AM EST on 01 November 2027. All technical questions and inquiries may be submitted within the response. The Government does not anticipate providing answers to submitted questions; however, questions will be considered when developing the solicitation. Please also include the company name, address, POC name, phone number, and email, Contractor and Government Entity (CAGE Code). Proprietary information should be clearly marked. The requested information is for planning and market research purposes only and will not be publicly released. Again, this is not a request for a proposal. Respondents might be notified when solicitation is posted. THE SUBMISSION OF THIS INFORMATION IS FOR PLANNING PURPOSES ONLY AND IS NOT TO BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT TO PROCURE ANY ITEM, NOR FOR THE GOVERNMENT TO PAY FOR THE INFORMATION SUBMITTED OR FOR ANY COSTS ASSOCIATED WITH PROVIDING THE INFORMATION.
65%
Special Notice11/01/2026
The Naval Supply ( NAVSUP) Systems Command, Fleet Logistics Center Jacksonville (FLCJ), FL intends to issue a sole source award utilizing Simplified Acquisition Procedures to Southern Electro Mechanical Services, INC. for Shredder Maintenance services for NAVSCOLEOD. Southern Electro Mechanical Services, INC. is the only source that can provide this requirement because they are the only regional authorized service and material provider for said machinery. The use of OEM material is required to ensure the warranty on the work performed and equipment is maintained. The applicable North American Industrial Classification System Code ( NAICS) code that these items fall under is 811310 , with a size standard of $12.5 ( millions of dollars). The notice of intent is for information purposes only. All sources eligible to provide the requirement must respond in writing. Responses must be supported with clear and convincing evidence to clearly articulate the ability to provide this requirement as outlined above. A request for documentation will not be considered as an affirmative response. If no responses are received, within ten (10 ) calendar days after publication of this notice, to the effect that comparable items are available, and that this is more advantageous to the Government than obtaining this product through a sole- source contract, then a sole source acquisition award will be made. Response to this notice is to be sent to kenneth.b.brown24.civ@us.navy.mil A determination by the Government not to compete this proposed contract is entirely at the discretion of the Government Information received a a result of this notice will be considered solely for the purpose of determning whether to conduct a compettitive procurement and will be at the sole discretion of the Contracting Officer. If no written responses are received by 4:00 p.m. 11 November 2026, the contract will be awarded without further notice.
64%
Special Notice11/11/2026
N00164-27-Q-0013 – ON GOING MAINTENANCE– PSC J054 – NAICS 811310 ISSUE DATE 03 NOV 2026 – CLOSING DATE 10 NOV 2026 – 4:00 PM Eastern Time Naval Surface Warfare Center (Crane) has a requirement for Ongoing Maintenance S/N: X, Y, Z To include all required materials, labor, and handling. IAW Salient Characteristics. 100% SET ASIDE FOR SMALL BUSINESS Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 866-606-8220 or via the internet at https://sam.gov. This solicitation is being issued pursuant to the procedures at FAR Part 13 as a written . Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-27-Q-0013 is hereby issued as an attachment hereto. All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/. It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. Offers shall be e-mailed to trista.m.ray.civ@us.navy.mil. All required information must be received on or before 10 NOV 2026 – 4:00 PM EASTERN TIME.
64%
Combined Synopsis11/10/2026

Additional Details

Solicitation Number

N4215824RE001

Archive Date

Apr 6, 2024

Office Address

PORTSMOUTH, VA, 23709-1001