Notice ID: 0649cc13c22845a0a7d7dcd85b677914Award NoticeAwarded
APL-62 Barracks Craft
Awarded on May 7, 2020. Full description on SAM.gov.
Awarded tounder N4523A20C1055 (source: SAM.gov award notice)• $4.7M
Overview
- Posted
- May 12, 2020
- Notice type
- Award Notice
- NAICS
- 336611: Ship Building and Repairing
- Agency
- Department of War
Notice details
- Place of performance
- Washington, Oregon, California
- Last updated
- Dec 4, 2025
- Award date
- May 7, 2020
- Award amount (SAM.gov award notice)
- $4.7M
Identifiers
- Solicitation number
- N4523A20R1063
- Notice ID
- 0649cc13c22845a0a7d7dcd85b677914
- Award number (PIID)
- N4523A20C1055
Description
NOTE 1) The answer to Request for Clarification (RFC) 1 has been posted as an attachment. The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of the APL-62 homeported at Puget Sound Naval Shipyard, Bremerton. The APL-62 has the following general characteristics: L: 360 ft. x W: 95 ft. with a Draft of 6 ft. 2 in. Full Displacement: 4680 L Tons Hull and superstructure: Steel The contractor’s facility must possess the capability of accommodating the APL-62 with the dimensions as stated above and be in the geographic area of consideration. Geographic area of consideration: This vessel is home ported at PSNS&IMF, WA. To facilitate proper government oversight, the contractor’s facility must be located in Washington, Oregon, or California. APL-62’s Scope of work overview - Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Dock, wash, and clean the exterior surfaces of the vessel upon docking. Blast and preserve exterior hull surfaces, underwater body, and CHT tank. Accomplish visual inspections of hull and body and CHT tank. Preserve steel fendering. Replace hull anodes. Accomplish hull and body ultrasonic test inspections. Accomplish water heater replacements. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Expected Period of Performance is as follows: 12 August 2020 to 10 February 2021. The Government is contemplating a full and open competition under the North American Industry Classification System (NAICS) 336611. The government anticipates award of the Firm-Fixed Price, stand-alone contract in April 2020 to the responsible contractor on a lowest price, technically acceptable basis in accordance with but not limited to the Federal Acquisition Regulation (FAR) 15.101-2. Offerors can view and/or download the work specification (Attachment J-1) attached herein. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. Reference drawings (Attachment J-7) will be delivered via the DoDSafe website to SAM registered contractors whose NAICS include 336611 and have a ship repair facility. Email request for drawings to brian.fergus@navy.mil and gary.binder@navy.mil no later than 27 February 2020 at 2PM PST. The Government will provide a link to download the files from the DoDSafe website. Include your CAGE code and ship repair facility address in the body of the email. NOTICE: The shipcheck is scheduled for 20 February 2020. Section L (Solicitation pages 54-61) includes information regarding base access deadlines.
Award Overview
Award Number
N4523A20C1055
Award Amount (SAM.gov award notice)
$4.7M
Award Date
May 7, 2020
Awardee
Awardee UEI
V5XTQ5H736B7
Original Solicitation
Notice ID: 0649cc13c22845a0a7d7dcd85b677914
Posted Date: May 12, 2020
Original Response Deadline: Not specified
More From This Vendor
Top 5 most recent
- $1.0KSigned Jul 7, 2026
- —Signed Jul 2, 2026
- $2.9MSigned Jul 2, 2026
- $2.9MSigned May 27, 2026
- $2.9MSigned May 4, 2026
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N4523A20R1063- Market Research
- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- 3×
- Pre-SolicitationOct 7, 2019
APL-62 Maintenance, Repair, and Preservation
- 2×
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
30 JULY 2026: The purpose of this amendment is to update the Attachment 1 Statement of Work as of 28 July 2026 as a result of Request for Clarification (RFC) 12. Government Response to RFC 12 is also posted. Solicitation is due TUESDAY, 4 AUGUST 2026 AT 12:00PM. _________________________________________________ 24 JULY 2026: The purpose of this amendment is to update the Attachment 1 Statement of Work as of 21 July 2026 and update the Attachment 2 Price Proposal Worksheet. Solicitation is due FRIDAY 31 JULY 2026 AT 12:00PM. ______________________________________________________ 27 MAY 2026: The purpose of this amendment is to provide Government response to Request for Clarification (RFC) 06-11 and update the Attachment 1 Statement of Work as of 27 May 2026. Solicitation is due WEDNESDAY, JUNE 3, 2026 AT 12:00PM. ______________________________________________________ 6 MAY 2026: The purpose of this amendment is to provide Government response to Request for Clarification (RFC) 01-05, update the Attachment 1 Statement of Work as of 6 May 2026, update the Attachment 2 Price Proposal Worksheet, and add a ship check on 19 May 2026. The deadline for RFC has been extended to 22 May 2026. Solicitation is due FRIDAY, MAY 29, 2026 AT 12:00PM ____ 1 MAY 2026: Updated solicitation to correct a clerical error. Solicitation is due FRIDAY, MAY 8 AT 12:00PM. Answers to RFCs 01-02 uploaded. _______________________________________________ 14 APRIL 2026: Amendment 0001: The purpose of this amendment is to add a Ship check date, time, extend the deadline for Requests for Clarification, and add BAVR Instructions to the Attachments. _______________________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation in support six (6) Naval Sea Systems Command (NAVSEA) 33-foot harbor security vessels (33HS), six (6) 64-foot patrol boats (64PB) and three (3) 78-foot patrol boats (78PB). Work will be accomplished at the Contractors facility for the 33HS and 64PB, 78PB will be accomplished at NBK Bangor, KB Docks. The Government is seeking responses from sources that can perform the following work: The 33 FT Habor Security (33HS) Vessel characteristics are 37FT 4IN length, 11FT 5.5IN beam, 17,440 lbs light load, 2FT 2IN draft (full load), 4-5 years of age and the hull is an aluminum monohull. The 64 FT Habor Security (64PB) Vessel characteristics are 71.9FT length, 21.5FT beam, 103,397 lbs light load, 4.5 draft (full load), 16 years of age and the hull is an aluminum monohull. The 78 FT Habor Security (78PB) Vessel characteristics are 84.75FT length, 20.5FT beam, 175,660 lbs light load, 4.5 draft (full load), 8 years of age and the hull is an aluminum monohull. Scope Overview: Provide life cycle maintenance services for six (6) 33-foot harbor security vessels (33HS), six (6) 64-foot patrol boats (64PB), updated the navigation electronics on three (3) 78-foot patrol boats (78PB) and replace the warped area of a 64PB engine room bulkhead. To schedule delivery of 33HSs and 64PBs to the Contractors work site, the Contractor will coordinate with the Contracting Officer, via the Contracting Officers Representative (COR). Upon docking 33HSs, 64PBs and 78PBs, wash and clean the vessels. The vessel availability is scheduled to be 12 months from the date of contract award. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. | 73% | Combined Synopsis | 08/04/2026 |
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YON-325. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YON-325 • Length: 199 FT • Width: 54 FT • Height: 15 FT • Age: 21 YRS • Hull Type: Steel • Draft: 3 FT • Full Displacement: 2,848 L Tons • Light Load: 706 L Tons Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel from Manchester Fuel Depot to the Contractor’s facility. Dock, wash, and clean exterior surfaces of the vessel upon docking. Replace zinc anodes on hull / Skegs. Accomplish preservation to Underwater Hull, Freeboard, Main deck, Deck house, Cargo piping and all deck fittings. Clean non-skid located Main deck, Deck house top and Cargo deck. Remove, clean and install Rubber fenders. Modify existing Piping eliminate Aft Flow Meter and insert spool. Accomplish Ultrasonic test measurement and visual inspection of the hull, Main deck, Cargo deck and Deck house top. Open, Clean, Pump and maintain clean and dry each tank/void. Inspect tanks/voids for defects Refresh Exhaust Muffler for Yanmar and Main Engine. Replace Solar Panels. Remove Antenna Support Modification. Replace Fuel Oil Tank Piping. Replace and Calibrate Cargo Tank Level Indicator’s (TLI’s). Perform Preliminary Air test of Tanks/voids/Steel Fendering and Skegs. Accomplish a final closure inspection of each tank/void upon completion of all work installing new gaskets and fasteners. Perform Final Air Test of Tanks/voids/Steel Fendering and Skegs. Accomplish repair, replace gaskets, and adjust watertight hatches and doors. Accomplish Cargo Pump Diesel and Diesel generator maintenance and repair. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Calibration of TLI’s, shall be conducted at Manchester Fuel Depot (MFD) in Manchester, WA. YON-325 Prime Period of Performance: Estimated August 2027 through November 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "Maintenance, Repair, and Preservation of YON-325 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of YON-325 package? 5. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA)? When to Submit: Responses are requested no later than 12:00PM PT, on 18 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract. | 71% | Market Research | 11/18/2026 |
4 NOV 2026: The purpose of this amendment is to reopen the solicitation, update the deadline for quote submission to 13 November 2026 at 2:00 PM PT, update the period of performance to 15 December 2026 - 19 February 2027, update SLIN 0001AA and 0001AB delivery date to 19 February 2027, add the following provisions/clauses: DFARS 252.245-7003, DFARS 252.217-7006, DFARS 252.217-7012, DFARS 252.217-7014, DFARS 252.217-7016, and update the solicitation contact information. _______ 4 AUG 2026: The purpose of this amendment is to update the Attachment 1 Statement of Work as of 4 August 2026 as a result of Request for Clarification (RFC) 01. Government answer to RFC 01 is also posted. ________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of one (1) Edgecumbe RCD Barge. The Edgecumbe RCD Barge characteristics are 240 FT length, 60 FT width, 2 FT 11 IN Draft, 928 L Tons full displacement, 48 years of age, and hull material is steel. The Contractors facility must possess the capability of accommodating one (1) Edgecumbe RCD Barge with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officers Representative (COR) to deliver the vessel to the Contractors facility. Upon docking vessel, wash, and clean vessel. Accomplish zinc anode replacement; preliminary and final air tests of all tanks/voids; tank/void open, clean and gas free; and support ABS and USCG inspections. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The vessel availability is scheduled to be 15 December 2026 - 19 February 2027. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. | 71% | Solicitation | 11/13/2026 |
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YT-812. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YT-812 • Length: 90 FT • Width: 38 FT • Age: 4 YRS • Hull Type: Steel • Draft: 16 FT • Full Displacement: 494 L Tons • Light Load: 438 L Tons Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the vessel to the Contractor’s facility. The Government will transport the vessel to the Contractor’s repair facility. Upon docking vessel, wash, and clean vessel. Replace zinc and impressed anodes. Blast and preserve underwater hull and freeboard, bulwarks, and handrails. Blast and preserve main deck, 1st deck, and 2nd deck non-skid. Perform hull and freeboard Ultrasonic Test (UT) inspections. Perform hull and freeboard, main deck, 1st deck, and 2nd deck Visual Inspections (VT). Repair hull and winch valves. Repair deckhouse expansion joint. Open, pump, clean, inspect and test CHT, ballast, potable water, fuel oil, waste oil and day tanks. Preserve, disinfect and certify the potable water tank. Onload fuel. Repair HVAC thermostat. Replace deck winch, mast, and brow systems hydraulic hoses. Accomplish 1- and 5-year interval inspection and repair requirements for port and starboard Schottel Z-drive units. Accomplish repairs to the port and starboard twin disc transmission coolers. Accomplish winch control piping modification (YT808-0104D), air piping modification (YT808-0105D), potable water hose bibb drain valve installation (YT808-0107D), and automatic voltage regulator installation (YT808-0109D). Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the SUPERVISOR. Upon completion of all work the Government will take custody of the vessel. To facilitate proper government oversight, the facility where the work will be performed shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the west of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YT-812 Availability: Estimated July 2027 through September 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with " Maintenance, Repair, and Preservation of YT-812 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA) issued by Naval Sea Systems Command (NAVSEA)? 5. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of YT-812 package? When to Submit: Responses are requested no later than 12:00PM PT, on 3 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract. | 71% | Market Research | 11/03/2026 |
22 October 2026- Response to RFC 001 has been posted. ________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of IX-551. The IX-551 characteristics are Length: 260 FT, Width: 85 FT, Age: 10 Years, Hull Type: Steel, Draft: 8 FT 6 IN, Full Displacement: 3,070 L Tons and Light Load: 2,267 L Tons. The Contractors facility must possess the capability of IX-551 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the Asset to the Contractors facility. Upon docking the Asset, wash, and clean the exterior surfaces of the Asset. Blast and preserve all exterior hull surfaces, underwater body, freeboard, moon pools and bulwark surfaces of the Asset. Fill, drain, air test, inspect each underwater skeg on the Asset. Accomplish visual inspections of hull and body and all tank/voids. Remove existing and install new zinc anodes and hardware on the underwater hull. Shift the Asset on the blocks to achieve 100 percent preservation of underwater hull. Apply non-skid system to main deck and 02/03 level decks. Accomplish preliminary and final air tests to tanks/voids. Open, pump, ventilate, gas free and clean all tanks. Accomplish partial preservation of Qty (24 EA) tanks. Preserve tank/void manhole covers. Identify distinguishing figures and markings, Remove, clean and reinstall rubber fenders. Open and inspect all pumps and overboard discharge valves. Accomplish visual inspection and final closeout inspection of each tank/void upon completion of all work. Install new manhole gaskets and fasteners. Undock the Asset. Arrange and coordinate the delivery of the Asset back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by this Statement of Work or described in this Scope Overview are included in section 3.0 of the Statement of Work. The IX-551 will be ready for pick up on or after 1 April 2027. Refer to page 1 Request for Quote (RFQ) of the Solicitation regarding desired and required delivery information. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. | 71% | Combined Synopsis | 10/28/2026 |
Additional Details
Solicitation Number
N4523A20R1063
Archive Date
May 22, 2020
Office Address
BREMERTON, WA, 98314-5001