GovChime
Notice ID: 8dfd86fe7d5c4cf185a76d3150c5cd77Combined Synopsis/Solicitation

Thermal Spray - SSBN733 AN/BRR-6 Drive Shaft

Archived on December 4, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−08:00
Posted
November 18, 2020
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
Agency
Department of WarDepartment of the Navy

Notice details

Office
PUGET SOUND NAVAL SHIPYARD IMF
Last updated
Dec 4, 2025

Identifiers

Solicitation number
N4523A21Q1304
Notice ID
8dfd86fe7d5c4cf185a76d3150c5cd77

Description

Thermal Spray service for the outer surfaces of the starboard AN/BRR-6 Drive Shaft (item 7 of Reference 2.4) of SSBN733. Must use NAVSEA certified thermal spray deposition processes to meet specifications. Reference 2.1, Enclosure (2), paragraph 1 specifies refurbishment of the outer surfaces of the starboard AN/BRR-6 Drive Shaft using thermal spray processes identified in Reference 2.2. Place of Performace: Contractor's Facility (CONUS) Period of Performance: Contract award date - 7 December 2020 Delivery/Shipping: Expedited Next-day Air freight and shipping of the starboard AN/BRR-6 Drive Shaft from TRF-B to the contractor is the responsibility of, and funded by, TRF-B. TRF-B will provide the shipment tracking identification data to the contractor within 24 hours of shipping carrier pick-up from TRF-B. Expedited Next-day Air freight and shipping of the refurbished starboard AN/BRR-6 Drive Shaft from the contractor to TRF-B is the responsibility of, and funded by, the contractor. The contractor shall provide the shipment tracking identification data to the TRF-B COR listed within 24 hours of shipping carrier pick-up from the contractor. FOB Destination: TRIDENT Refit Facility Bangor 7000 Finback Circle BLDG 7000 Door 12 Receiving Silverdale, WA 98315-7000 ATTN: Shop 67H Supervisor, PH: (360) 315-1457 or (360) 315-1231 Crate Dimensions: Length: 82.5 , Width: 22.5 , Height: 26.5 Crate Weight: 170Lbs Crate Weight w/shaft: 870Lbs approx One lathe machining adapter will be furnished with the shaft for use with the end opposite the repair area; this end has an electrical receptacle welded on to the end of the shaft at a 45degree angle which makes fitting it into standard lathe chuck jaws problematic. The other end (the repair area end) can use a typical live center from a lathe. The shaft adapter has an area for the live center to mate with so both ends can be placed between centers. See Statement of Work in attached solicitation N4523A21Q1304 Rev.1 and associated references for complete service description. Offerors must be registered in the System for Award Management (SAM) database prior to award of a DOD Contract. A contract cannot be awarded to a contractor not registered in SAM. Remember to review your NAICS codes listed in your SAM record to makes sure you have listed the NAICS code for this procurement. Registration is free and can be completed online at http://www.sam.gov/ Any additional contract requirement(s) or terms and conditions determined by the contracting officer to be necessary for this acquisition and consistent with customary commercial practices are included. All responsible sources may submit a proposal which shall be considered by the agency. Proposals must be submitted via email to nicholas.a.crowell@navy.mil and richard.barzaghi@navy.mil by 12:00 p.m. Pacific Standard Time on 19 November 2020. Any award resulting from this RFQ will be made based on the lowest evaluated priced offer that meets the statement of work requirements. Point of Contact for small business questions or assistance is the Puget Sound Naval Shipyard and Intermediate Maintenance Facility Deputy for Small Business Brenda Lancaster. Direct: (360) 476-1327 Email: brenda.lancaster@navy.mil NOTE: Late offers will be handled in accordance with FAR Clause 52.212-1 Instructions to Offerors - Commercial Items. No facsimile submissions will be accepted. Proposals are due by 12:00 p.m. Pacific Standard Time on 19 November 2020. Ensure that you certify under FAR 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2020). The boxes that must be checked are on page 12 of the RFQ.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N4523A21Q1304
  1. Combined Synopsis
  1. 4×
    Combined SynopsisCurrentNov 17, 2020

    Thermal Spray - SSBN733 AN/BRR-6 Drive Shaft

    Notice 8dfd86fe7d5c4cf185a76d3150c5cd77 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

N4523A21Q1304

Archive Date

Dec 4, 2020

Office Address

BREMERTON, WA, 98314-5001