Notice ID: 40f7520af9704a049989e2f3043027cbSolicitation
UF 116 & 127 Maintenance, Repair, and Preservation
Archived on June 11, 2022. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM UTC−07:00
- Posted
- April 25, 2022
- Notice type
- Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- PUGET SOUND NAVAL SHIPYARD IMF
- Place of performance
- Bremerton, WA, 98314
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N4523A22R1055
- Notice ID
- 40f7520af9704a049989e2f3043027cb
Description
The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation on UF 116 & 127. The UF-116 & UF-127 equipment characteristics can be found in section 1.1 of the attached Statement of Works (SOWs). The contractors facility must possess the capability of accommodating the UFs with the characteristics as found in the SOWs. Coordinate with the Contracting Officer, via the Contracting Officers Representative (COR) to deliver the vessel to the Contractors facility. Upon docking vessel, wash and clean vessel. Remove existing rubber fenders and associated hardware; retain hardware and fasteners. for installation after sweep-blast cleaning. Remove existing and install new zinc anodes. Preserve interior and exterior of tank covers, replace all gaskets. Blast and preserve main deck, hull, freeboard and components. Apply new non-skid and coating system to the main deck. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. The Period of Performance (PoP) is scheduled to be from 2 Aug 2022 through 27 Oct 2022. This is a total small business set-aside under the North American Industry Classification System (NAICS) 336611, small business size standard 1,250 employees. The Government intends award a Firm-Fixed Price, stand-alone contract in June 2022 to the responsible contractor on a lowest price, technically acceptable basis in accordance with but not limited to the Federal Acquisition Regulation (FAR) 15.101-2. Offerors can view and/or download the draft notional work specifications for review at https://www.sam.gov. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N4523A22R1055- Market Research
- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Market ResearchJan 26, 2022
UF 116 and & 127 Maintain, repair, and preservation
- Pre-SolicitationApr 1, 2022
UF 116 & 127 maintenance, repair, and preservation
- SolicitationCurrentApr 25, 2022
UF 116 & 127 Maintenance, Repair, and Preservation
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
30 JULY 2026: The purpose of this amendment is to update the Attachment 1 Statement of Work as of 28 July 2026 as a result of Request for Clarification (RFC) 12. Government Response to RFC 12 is also posted. Solicitation is due TUESDAY, 4 AUGUST 2026 AT 12:00PM. _________________________________________________ 24 JULY 2026: The purpose of this amendment is to update the Attachment 1 Statement of Work as of 21 July 2026 and update the Attachment 2 Price Proposal Worksheet. Solicitation is due FRIDAY 31 JULY 2026 AT 12:00PM. ______________________________________________________ 27 MAY 2026: The purpose of this amendment is to provide Government response to Request for Clarification (RFC) 06-11 and update the Attachment 1 Statement of Work as of 27 May 2026. Solicitation is due WEDNESDAY, JUNE 3, 2026 AT 12:00PM. ______________________________________________________ 6 MAY 2026: The purpose of this amendment is to provide Government response to Request for Clarification (RFC) 01-05, update the Attachment 1 Statement of Work as of 6 May 2026, update the Attachment 2 Price Proposal Worksheet, and add a ship check on 19 May 2026. The deadline for RFC has been extended to 22 May 2026. Solicitation is due FRIDAY, MAY 29, 2026 AT 12:00PM ____ 1 MAY 2026: Updated solicitation to correct a clerical error. Solicitation is due FRIDAY, MAY 8 AT 12:00PM. Answers to RFCs 01-02 uploaded. _______________________________________________ 14 APRIL 2026: Amendment 0001: The purpose of this amendment is to add a Ship check date, time, extend the deadline for Requests for Clarification, and add BAVR Instructions to the Attachments. _______________________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF), Bremerton, Washington intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair and preservation in support six (6) Naval Sea Systems Command (NAVSEA) 33-foot harbor security vessels (33HS), six (6) 64-foot patrol boats (64PB) and three (3) 78-foot patrol boats (78PB). Work will be accomplished at the Contractors facility for the 33HS and 64PB, 78PB will be accomplished at NBK Bangor, KB Docks. The Government is seeking responses from sources that can perform the following work: The 33 FT Habor Security (33HS) Vessel characteristics are 37FT 4IN length, 11FT 5.5IN beam, 17,440 lbs light load, 2FT 2IN draft (full load), 4-5 years of age and the hull is an aluminum monohull. The 64 FT Habor Security (64PB) Vessel characteristics are 71.9FT length, 21.5FT beam, 103,397 lbs light load, 4.5 draft (full load), 16 years of age and the hull is an aluminum monohull. The 78 FT Habor Security (78PB) Vessel characteristics are 84.75FT length, 20.5FT beam, 175,660 lbs light load, 4.5 draft (full load), 8 years of age and the hull is an aluminum monohull. Scope Overview: Provide life cycle maintenance services for six (6) 33-foot harbor security vessels (33HS), six (6) 64-foot patrol boats (64PB), updated the navigation electronics on three (3) 78-foot patrol boats (78PB) and replace the warped area of a 64PB engine room bulkhead. To schedule delivery of 33HSs and 64PBs to the Contractors work site, the Contractor will coordinate with the Contracting Officer, via the Contracting Officers Representative (COR). Upon docking 33HSs, 64PBs and 78PBs, wash and clean the vessels. The vessel availability is scheduled to be 12 months from the date of contract award. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. | 97% | Combined Synopsis | 08/04/2026 |
22 October 2026- The purpose of amendment 0003 is to extend the proposal due date from 26 October 2026 at 12:00 PM PT to 2 November 2026 at 12:00 PM PT. ____________________ 14 October 2026-The purpose of amendment 0002 is to extend the RFC due date from 8 October 2026 at 12:00 PM PT to 15 October 2026 at 12:00 PM PT and the proposal due date from 19 October 2026 at 12:00 PM PT to 26 October 2026 at 12:00 PM PT. Also, the Attachment 1 Statement of Work and Attachment 6 References and Drawings have been updated as of 13 October 2026. ____________________ 17 September 2026- Reason for amendment 0001 is to add additional ship check date, extend the deadline for clarifications and solicitation end date. See section L. ____________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of YRBM-50. The YRBM-50 characteristics are Length: 153FT, Width: 43FT, Age: 82 Years, Hull Type: Steel, Draft: 6FT, Full Displacement: 900 L Tons and Light Load: 427 L Tons. The Contractors facility must possess the capability of YRBM-50 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the vessel to the Contractors facility. To facilitate proper government oversight, the facility where the work will be performed shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the west of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Upon docking vessel, wash, and clean vessel. Accomplish required inspections and fender repairs. Remove existing and install new zinc anodes. Hull, freeboard and exterior decks require ultrasonic measurement of plating thickness and repair of areas below minimum thickness as needed. Accomplish blast and paint preservation of hull, freeboard, exterior decks and superstructure. Vessel requires inspection for damage and deterioration (hull, exterior decks, and tanks/voids plating and framing). Apply new non-skid system to exterior decks. Open, clean, ventilate, inspect, test, and maintain dry each tank/void. Accomplish partial preservation of QTY (24 EA) ballast tanks/voids. Accomplish access cover and watertight hatch and door repairs. Disinfect and certify potable water system. Pump and clean the interior surfaces of the CHT tank. Accomplish main deck repairs, hawse hole bulls eye and bolster repairs, and hull fendering system modifications. Accomplish the following modifications: hot water heater installation, awning replacement, A/C plant replacement and backup systems, switchboard upgrades, 1MC replacement and phone system upgrades, and CCTV upgrades. Undock the vessel. Verify vessel drawings and provide redline drawings to reflect actual conditions of the vessel. Conduct dock trials. Coordinate with the SUPERVISOR to support and accomplish all contract requirements prior to the availability end date. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by the Statement of Work described in this Scope Overview are included in Section 3.0 of the Statement of Work. The vessel availability is scheduled to be 31 March 2027 through 31 March 2028. This is a 100% Small Business set-aside under the North American Industry Classification System (NAICS) 336611, size standard 1,300 employees. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. | 95% | Solicitation | 11/02/2026 |
The Solicitation number has been updated from N4523A26Q1012 to N4523A27Q0002. Total Small Business Set-aside has been updated on SAM to reflect the Solcitation. PURPOSE: The purpose of this amendment is to update the following: Attachment 1 Statement of Work Rev 1, Attachment 2 Price Worksheet Rev 1, Attachment 6 Drawings and References Rev 1, and add RFC Questions/Answers sheet. The following clauses were added: 252.217-7006, 252.217-7012, 252.217-7014, and 252.217-7016. SCHEDULE: The proposal due date and time has been extended to 2:00PM PST, 02 November 2026. TERMS: Added clause 252.217-7006, 252.217-7012, 252.217-7014, and 252.217-7016. All other terms and conditions remain unchanged. _______________________________________________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of YT-811. The YT-811 characteristics are Length: 90 FT, Width: 38FT 5IN, Age: 4 Years, Hull Type: Steel, Draft: 16 FT, Full Displacement: 494 L Tons and Light Load: 438 L Tons. The Contractors facility must possess the capability of YT-811 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the vessel to the Contractors facility. The Government will transport the vessel to the Contractors repair facility. Upon docking vessel, wash, and clean vessel. Replace zinc anodes. Blast and preserve underwater hull and freeboard, bulwarks, and handrails. Blast and preserve main deck, 1st deck, and 2nd deck non-skid, FME all polished stainless steel surfaces. Perform hull and freeboard Ultrasonic Test (UT) inspections. Perform hull and freeboard, main deck, 1st deck, and 2nd deck Visual Inspections (VT). Repair hull and winch valves. Repair deckhouse expansion joint. Test and preserve CHT, ballast, potable water, fuel oil, waste oil and day tanks. Accomplish Mast Lighting and Deckhouse Lighting Repairs. Replace all placards and labels on main, 1st and 2nd decks. Replace deck winch, mast, and brow systems hydraulic hoses. Accomplish winch control piping modification (YT-0104D). Overhaul Mast hydraulic ram, replace pins and bushings. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the SUPERVISOR. Upon completion of all work the Government will take custody of the vessel. Specific details of all work items and tasks required by this Statement of Work described in this Scope Overview are included in section 3.0 of this Statement of Work. The YT-811 will be ready for pick up on or after 2 March 2027. Refer to page 1 Request for Quote (RFQ) of the Solicitation regarding desired and required delivery information. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov. | 95% | Combined Synopsis | 11/02/2026 |
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation in support of one (1) Dive Boat 60DS1701. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. 60DS1701 • Length: 65.4 FT • Width: 22 FT • Age: 10 YRS • Hull Type: Aluminum • Draft: 3.5 FT • Full Displacement: 48.05 L Tons • Light Load: 8000 LBS Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel to the Contractor’s facility. Upon docking the vessel; wash and clean the exterior surfaces of the vessel. Remove Rubber Fenders. Replace Zinc Anodes. Hull Blasting and Preservation. Hull and Freeboard Visual Inspection. Hull and Freeboard Ultrasonic Test Inspection. Repair D-Fender Corrosion. Inspect Quick Acting Watertight Doors. Open, Pump, Clean, Ventilate, and Gas Free Tanks/Voids, Including Freshwater System. Tank/Void Visual Inspection Gunnel Repair. Main Propulsion and Steering Repairs. Main Cabin and Interior Spaces Deck Preservation. Replace bent brow bracket. Forward Push Bar Repair. Main Engine and SSDG 5K/10K Maintenance. Perform sea trials after completion of repairs and full cure time of preservation. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the COR. 60DS1701 Availability: Estimated July 2027 through September 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with " Maintenance, Repair, and Preservation of 60DS1701 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA) issued by Naval Sea Systems Command (NAVSEA)? 5. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of 60DS1701 package? When to Submit: Responses are requested no later than 2:00PM PT, on 27 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract. | 94% | Market Research | 11/27/2026 |
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YON-325. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YON-325 • Length: 199 FT • Width: 54 FT • Height: 15 FT • Age: 21 YRS • Hull Type: Steel • Draft: 3 FT • Full Displacement: 2,848 L Tons • Light Load: 706 L Tons Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel from Manchester Fuel Depot to the Contractor’s facility. Dock, wash, and clean exterior surfaces of the vessel upon docking. Replace zinc anodes on hull / Skegs. Accomplish preservation to Underwater Hull, Freeboard, Main deck, Deck house, Cargo piping and all deck fittings. Clean non-skid located Main deck, Deck house top and Cargo deck. Remove, clean and install Rubber fenders. Modify existing Piping eliminate Aft Flow Meter and insert spool. Accomplish Ultrasonic test measurement and visual inspection of the hull, Main deck, Cargo deck and Deck house top. Open, Clean, Pump and maintain clean and dry each tank/void. Inspect tanks/voids for defects Refresh Exhaust Muffler for Yanmar and Main Engine. Replace Solar Panels. Remove Antenna Support Modification. Replace Fuel Oil Tank Piping. Replace and Calibrate Cargo Tank Level Indicator’s (TLI’s). Perform Preliminary Air test of Tanks/voids/Steel Fendering and Skegs. Accomplish a final closure inspection of each tank/void upon completion of all work installing new gaskets and fasteners. Perform Final Air Test of Tanks/voids/Steel Fendering and Skegs. Accomplish repair, replace gaskets, and adjust watertight hatches and doors. Accomplish Cargo Pump Diesel and Diesel generator maintenance and repair. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Calibration of TLI’s, shall be conducted at Manchester Fuel Depot (MFD) in Manchester, WA. YON-325 Prime Period of Performance: Estimated August 2027 through November 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "Maintenance, Repair, and Preservation of YON-325 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of YON-325 package? 5. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA)? When to Submit: Responses are requested no later than 12:00PM PT, on 18 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract. | 94% | Market Research | 11/18/2026 |
Additional Details
Solicitation Number
N4523A22R1055
Archive Date
Jun 11, 2022
Office Address
BREMERTON, WA, 98314-5001