Troubleshoot and Repair Installed Universal Flowmeters
Archived on March 21, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM PST
- Posted
- February 20, 2026
- Notice type
- Special Notice
- NAICS
- 334513: Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVSEA.NAVSEA SHIPYARD.PUGET SOUND NAVAL SHIPYARD IMF
- Place of performance
- Silverdale, Washington
- Last updated
- Nov 2, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N4523A26Q0011
- Notice ID
- 3e308a4e53924e4a98c0d325c97c81bd
Description
THIS NOTICE OF INTENT IS NOT A REQUEST FOR QUOTES. A DETERMINATION NOT TO COMPETE THE PROPOSED PROCUREMENT BASED UPON RESPONSES TO THIS NOTICE IS SOLELY WITHIN THE DISCRETION OF THE GOVERNMENT.
Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF) hereby provides notice of its intent to award a sole-source, firm fixed price contract, to Sensia LLC. A Justification and Approval has been prepared. The period of performance is estimated to be March 10, 2026 to March 17, 2026. PSNS & IMF requires Original Equipment Manufacturer (OEM) to provide preventative maintenance for Cameron Tech Flow Transducers and Flow Computers
All components/parts of the Flow Transducers and Flow Computers are proprietary to the OEM.
THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES.
However, interested parties may identify their interest and capabilities, in a quote. To do so, respond to this requirement no later than March 6th, 2026 12:00 PM, PST.
A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Puget Sound Naval Shipyard and Intermediate Maintenance Facility will NOT be responsible for any costs incurred by interested parties in responding to this notice of intent. Only written responses will be considered. As a result of analyzing responses to this notice of intent, the Government shall determine if a solicitation will be issued. Any prospective contractor must be registered in the System for Award Management (SAM) in order to be eligible for award. Interested parties are encouraged to furnish information by email only with RESPONSE TO INTENT TO SOLE SOURCE FOR N4523A26Q0011 in the subject line.
All documents submitted will not be returned. All interested parties shall submit clear and convincing documentation demonstrating their capabilities to satisfy the requirements listed above to Katie Lauer, Contract Specialist, at katherine.e.lauer.civ@us.navy.mil and Amanpreet Johal, Contracting Officer, at amanpreet.s.johal2.civ@us.navy.mil. The capability documentation should include general information and technical background describing in detail the prospective contractor's capabilities and experience that will demonstrate the ability to support these requirements.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (1)
- Download
A5 N4523A26Q0011 Flowermeters SOW - Redacted.pdf
528 KBAdded in Special Notice version 3Posted
Lifecycle
- 3Version 3Special NoticeArchivedCurrent
Troubleshoot and Repair Installed Universal Flowmeters
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
RFQ N6449826Q50700001 has been amended to update the Part Numbers in each CLIN. The amended requested date for quote submission has been extended to 3/3/2026 at 12 PM EST. This is a Total Small Business Set-Aside Buy. This is BRAND NAME to Flow Technology. Please advise, if you have any other questions please contact: Joseph.w.aprile2.civ@us.navy.mil. Phone Calls will NOT be accepted. | 85% | Solicitation | 03/03/2026 |
69% | Solicitation | 11/19/2026 | |
Amended to include set aside code. An inline, remote version electromagnetic flowmeter for measuring industrial or municipal water and wastewater. It features a 4-line illuminated display with touch control, 4-20mA HART output, and a polyurethane liner. The process connection is a 16 inch CL.150 carbon steel flange (ASME B16.5) with 316L electrodes. Includes a weather protection cover. | 67% | Combined Synopsis | 04/10/2026 |
COMBINED SYNOPSIS/SOLICITATION #: N0017827Q6616NAICS Code: 334513FSC/PSC Code: 6685Anticipated Date to be published to the GPE: 11/10/2027Anticipated Closing Date: 11/17/2027Submitted by: Keith AubertTelephone#: 540-742-8886Email Address: keith.m.aubert2.civ@us.navy.milPSC/FSC Code and Description: 66- Instruments and Laboratory EquipmentDPAS Rating assigned: DO-C9 Basis for award: Award will be made on a Lowest Price Technically Acceptable basis. Full and Open Competition - FAR Part 12 (DPCAP Class Deviation (CD) 2026-O0028) Only One Source under SAT, FAR 12.102(a) (DPCAP CD 2026-O0028) Only One Source over SAT, 41 U.S.C. 1901, as implemented by FAR 12.102 (DPCAP CD 2026-O0028). Total Small Business Set-Aside FAR 19.104-1 (DPCAP CD 2026-O0037 Rev. 1)This is a combined synopsis/solicitation for commercial items or service prepared in accordance with FAR Part 12 (DPCAP CD 2026-O0028) using the publicizing requirements of FAR Part 5 (DPCAP CD 2026-O0003 Rev. 1). This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued.Synopsis/Solicitation N0017827Q6616 is issued as a Request for Quotation (RFQ). The provisions and clauses incorporated in this solicitation are those in effect through the Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement as of the date of issuance and are included in the attached SF 1449. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.For commercial acquisitions using simplified procedures under FAR Part 12 (DPCAP CD 2026-O0028), Buy American applies unless the value exceeds the applicable Trade Agreements threshold, in which case Trade Agreements apply except where an exception applies. See the applicable clauses provided in the SF1449.The Naval Surface Warfare Center Dahlgren Division (NSWCDD) intends to procure supplies produced by CI Systems: (1) 20 Absolute extended area blackbody, (1) 10 Absolute extended area blackbody, and (1) 8 Absolute extended area blackbody. See the attached Requirements List. CI Systems is located in Richardson,TX. CI blackbodies provide the essential thermal reference standards required to properly calibrate various imager assemblies within the laboratory environment. Additionally, these have Thermoelectric Coolers (TECs). Lastly, we are replacing like systems, so this is for one-to-one swap of existing hardware. A primary deliverable of this effort is the provision of highly calibrated data. Without these specific blackbody sizes, the laboratory cannot verify or guarantee the accuracy of the gathered sensor data.All costs associated with this requirement must be included in the quoted price as separate line items (taxes excluded). This includes costs such as shipping and freight to Dahlgren, VA 22448-5114 or any tariff or duty charges. No additional costs may be added after award. Where applicable, DFARS 252.225-7013 (DPCAP CD 2026-O0041 Rev. 1), Duty-Free Entry, will be incorporated. The Government will utilize Simplified Acquisition Procedures, and the order will be issued on a firm fixed-price basis.All responsible offerors shall submit a quotation in response to this solicitation. By submission of a quotation, the offeror represents compliance with the applicable representations and certifications, which are incorporated by reference and completed in the System for Award Management (SAM), as applicable. Submission of a quotation shall constitute the offerors unconditional agreement to the terms and conditions of this solicitation. Quotes will only be accepted from the Original Equipment Manufacturer (OEM), or authorized re-sellers who have provided a Letter of Authorization. If the offeror is not the OEM, the offeror shall provide documentation from the OEM confirming that they are an authorized reseller or distributor of the item(s) quoted. For sole source requirements, this publication is not intended to suggest that quotes from sources other than the OEM will be accepted. Quotations submitted without the required OEM authorization documentation will not be considered for award. Quotations that take exception to the terms and conditions of this solicitation will be deemed non-compliant and rejected. Offerors are encouraged to submit published pricing, historical pricing data, or other information to support the Governments price analysis and determination of fair and reasonable pricing. In order to be eligible for award, firms must be registered in the System for Award Management (SAM). Offerors may obtain information on registration in SAM by calling 866-606-8220, or via the Internet at https://www.sam.gov. Quote is due by 17 November 2026, no later than 05:00 p.m. EST/EDT with an anticipated award date by December 2027. Questions and responses regarding this synopsis/solicitation may be submitted by e-mail to keith.m.aubert2.civ@navy.mil prior to the RFQ closing. Email should reference Synopsis/Solicitation Number N0017827Q6616 in the subject line.Attachments when applicable-Requirements List-SF1449: Solicitation/Contract/Order for Commercial Items | 59% | Combined Synopsis | 11/17/2026 |
This procurement is a Total Small Business Set Aside for various quantity of Brand Name: Amtek XP2i Bar Gauges. Fully compliant quotes must be submitted in PDF format on company letterhead to terra.s.roberts.civ@us.navy.mil on or before the established closing date and time of this combined synopsis/solicitation; please note that late, partial, or incomplete submissions will not be accepted by the Government. Offerors must include their CAGE code, delivery lead times, and detailed technical specifications within their package. Payment terms are established as NET 30 days, and invoiced through the Wide Area Workflow (WAWF) system. If shipping charges are not included in the base product pricing, they must be represented as a distinct, individual line item on the quote. Please thoroughly review all attachments for precise product descriptions and quantities, as the final contract award will be determined on a Best Value to the Government basis, evaluating price, delivery schedule, quality, and past performance | 59% | Combined Synopsis | 11/13/2026 |
Additional Details
Solicitation Number
N4523A26Q0011
Archive Date
Mar 21, 2026
Office Address
BREMERTON, WA, 98314-5001