GovChime
Notice ID: 9dded0f63ba2b9633dbd412cd2769d2bAward NoticeAwarded

J--Award Notice for Naval Air Warfare Center Training Systems Division Software Maintenance of Fielded Training Systems task order under GSA Alliant Small Business GWAC

Awarded on April 30, 2018. Full description on SAM.gov.

Awarded tounder N6134018F0018 (source: SAM.gov award notice)• $55.6M

Overview

Posted
May 1, 2018
Notice type
Award Notice
NAICS
541512: Computer Systems Design Services
Agency
Department of War

Notice details

PSC
J: MAINT, REPAIR, REBUILD EQUIPMENT
Last updated
Sep 10, 2025
Award date
Apr 30, 2018
Award amount (SAM.gov award notice)
$55.6M

Identifiers

Solicitation number
N6134017R0003
Notice ID
9dded0f63ba2b9633dbd412cd2769d2b
Award number (PIID)
N6134018F0018

Description

The Government has awarded a Cost-Plus-Fixed-Fee task order in the amount of $58,154,671.63 under FAR Part 16.505 on the General Services Administration’s (GSA) Alliant Small Business (ASB) Government Wide Acquisition Contract (GWAC) for the procurement of sustainment support services for Fielded Training Systems in CONUS and OCONUS locations. The Software Maintenance of Fielded Training Systems requirement is for services to support the mission of the Naval Air Warfare Center Training Systems Division (NAWCTSD) In-Service Engineering Office (ISEO). Previous Nov 14, 2017 award to DKW Communications, Inc. was protested. The Navy took corrective action by amending the solicitation, opening negotiations, obtaining revised proposals and making a new source selection decision. As a result, the GAO dismissed the protest as academic. The purpose of this Award Notice is to provide information concerning the new award decision.

Full description on SAM.gov

Award Overview

Award Number

N6134018F0018

Award Amount (SAM.gov award notice)

$55.6M

Award Date

Apr 30, 2018

Awardee

Awardee UEI

DKDMARTHRKD9

Original Solicitation

Notice ID: 9dded0f63ba2b9633dbd412cd2769d2b

Posted Date: May 1, 2018

Original Response Deadline: Not specified

Other Orders Under Same Vehicle

Top 5 by total obligated

5
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $57.0MSigned Nov 9, 2023
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $57.0MSigned Dec 20, 2023
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $57.0MSigned Dec 21, 2023
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $57.0MSigned Jan 31, 2024
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $56.4MSigned Sep 28, 2023

More From This Vendor

Top 5 most recent

2
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $55.5MSigned Sep 9, 2025
  • N6134018F0018
    DKW COMMUNICATIONS INC
    Department of DefenseNAICS 541512
    $55.6MSigned Apr 8, 2025

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N6134017R0003
  1. Pre-Solicitation
  2. Awarded

This opportunity has been awarded.

  1. Pre-SolicitationSep 19, 2016

    J--Notice of Tentative Acquisition Strategy for Naval Air Warfare Center Training Systems Division Software Maintenance of Fielded Training Systems task order under GSA Alliant Small Business GWAC

    Notice 1379e2c881b8d279047c0ad702a04e14 on SAM.gov

  2. 2×
    AwardedCurrentNov 14, 2017

    J--Award Notice for Naval Air Warfare Center Training Systems Division Software Maintenance of Fielded Training Systems task order under GSA Alliant Small Business GWAC

    Notice 9dded0f63ba2b9633dbd412cd2769d2b on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
PURPOSE: Product Manager Tactical Training System (PdM TTS) is requesting information from interested offerors regarding Group 1 UAS compliance with the TRACR II ICD BACKGROUND: PdM TTS is responsible for supporting ranges that utilize the TRACR II software. An emerging requirement includes integration of Group 1 UAS training into these existing ranges. This RFI is intended to gauge industry interest and understanding of the ICD to ensure a common communications interface is established. Please note that the Government team is currently developing a software compliance test tool to validate conformity. This will be released to respondents at a later date. REQUEST FOR INFORMATION (Technical): PDM TTS is seeking proposals from vendors outlining their plan and methodology to demonstrate that their drone solution can successfully integrate with and operate according to the specifications within the UAS TRACR II ICD. The proposal should clearly describe the approach for implementing and validating the required interfaces and behaviors. Respondents should describe their proposed validation strategy, including but not limited to: • Implementation Plan: A high-level plan for implementing the UAS TRACR II ICD communication protocols on existing UAS platforms. • Testing and Validation Methodology: A comprehensive description of the testing procedures, simulation environments, and/or physical tests that would be used to verify full compliance with the ICD. This should cover all applicable messages and behaviors. • Verification of Message Handling: The approach to demonstrate correct parsing, processing, and generation of all relevant messages defined in the ICD, including command and control messages, and status telemetry. • Behavioral Compliance: The methodology to validate that the UAS exhibits the correct behaviors in response to commands, such as path execution, landing protocols, and handling of acknowledgements and fault conditions. • Network Communication: Ability to communicate over IP-based networks, handling point-to-point and point-to-multipoint messages, and correctly interpreting network endpoint data. • Message Processing: Correct implementation of the message header and processing of various message types, including acknowledgment logic and handling of message sequencing. • Control States: Demonstration of the UAS correctly managing and transitioning between control states (No Control, Pilot Control, Central Control) as defined in the ICD. • Command Execution: The ability to correctly receive, acknowledge, and execute key command messages. • Required Hardware: List all hardware required beyond the UAS needed to communicate with the TRACR II Computer (including radios, ground station, etc.). Additionally, respondents are encouraged to comment on any portions of the ICD that are not clear, and to propose any changes that would make implementation more robust. COMPANY PROFILE: To assist the Government in determining if this can be set aside for small businesses, please provide the following administrative information: • Company Name, CAGE Code, and UEI Number. • Point of Contact (Name, Phone, Email). • Business Size Standard and Socio-Economic Status (e.g., Small Business, 8(a), HUBZone, SDVOSB, WOSB) under NAICS Code: 541512 for Computer Systems Design or 541511 for Custom Computer Programming). • A brief summary of your company’s experience implementing similar cross-network data transfer solutions in DoD or highly regulated environments. SUBMISSION INSTRUCTIONS: The Government is exploring a range of acquisition strategies and plans to utilize the information gained from this White Paper to help further shape the acquisition strategy. Responses should be limited to a five (5) page max white paper, not including cover page, cover letter, table of contents and any other documentation submitted in response to Past Performance. Any proprietary concepts of information should be clearly identified as such. Submitted data and information will not be returned. Any information submitted in response to this RFI Notice is strictly voluntary. This notice is for information and planning purposes. The Government will not pay or otherwise reimburse respondents for information submitted. Industry is encouraged to suggest alternative NAICS codes that may better align with the requirements. All correspondence and questions regarding this notice shall be directed to the Contracting Office POC and Program Office POC listed below: POINT OF CONTACT INFORMATION: Contracts POC: Reuel Dunn: reuel.p.dunn.civ@army.mil, 520-714-5529 Program POC: James Efantis: james.efantis2.civ@army.mil, 407-284-7334 Disclaimer: This notice does not constitute an invitation for bids or a request for proposal and is not a commitment by the U.S. Government to procure subject products or services nor will the Government reimburse any parties for costs associated with this request. The Government will use the information received to forge its acquisition strategy. Additionally, all submissions become Government property and will not be returned. No basis for a claim against the Government shall arise as a result from a response to this RFI.
-Market Research11/22/2026
Raised access floor panels for computer room.- IAW attached RFQ Combo Solicitation
-Combined Synopsis07/31/2026
The U.S. Army Program Executive Office for Simulation Training and Instrumentation (PEO STRI) Joint Project Manager for Medical Modeling and Simulation (JPM MMS) Product Manager, Medical Simulation (PdM MedSim) is issuing this Sources Sought notice as a means of conducting market research to identify potential sources having an interest and industry technologies available to produce a Medical Training Command and Control (MTC2) System. The MT-C2 System is a control center that will allow remote training platform management within the Army's standardized Medical Simulation Training Centers (MSTC)s. The result of this market research will contribute to determining the method of procurement. Based on the responses to this sources sought notice/market research, this requirement may be set-aside for small businesses (in full or in part) or procured through full and open competition. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. PROGRAM BACKGROUND PdM MedSim has a requirement for the procurement of the production and installation of systems and equipment that provide the capability to command and control all associated equipment that facilitates training within the MSTCs. The MSTC is a standardized Army training Program of Record (POR) located at various military installations worldwide, delivering effective medical training with a standardized training platform to better prepare Soldiers in the application of medical interventions under combat conditions. The MSTC provides medical training and education on new battlefield procedures and equipment, while affording Soldiers the ability to receive comprehensive training in several formats such as the classroom setting, practical hands-on training simulation, trauma lanes, and distance learning. Each MSTC provides a medical skills training platform where Soldiers obtain sustainment and validation of their medical skills in accordance with Training Circular (TC) No. 8-800, Medical Education and Demonstration of Individual Competence (MEDIC), and the Combat Life Saver (CLS) Programs of Instruction (POI). During a training event, Soldiers perform tasks on training devices (manikins and part task trainers) using scalable and adjustable scenarios within the simulated environments. The MT-C2 System enables training environment manipulation, medical scenario integration, mannequin control, audio video (AV) surveillance and recording. The MT-C2 System provides the capability to manipulate the environments in which scenarios take place in order to maximize the positive impact and training experience of each fluid training event within the training experience. The Integration of the MT-C2 System in the MSTCs shall provide equipment standardization across all fielded sites. REQUIRED CAPABILITIES The Government already fielded two prototype MT-C2 Systems at Ft Hood, TX and Camp Humphreys, Korea, and has a requirement to field the MT-C2 System at the remaining 19 MSTCs listed below: Ft. Lewis, WA Ft. Drum, NY Ft. Riley, KS Ft. Bliss, TX Vilseck, Germany Ft. Carson, CO Ft. Campbell, KY Ft. Stewart, GA Ft. Bragg, NC Camp Shelby, MS Ft. McCoy, WI Ft. Dix, NJ Ft. Wainwright, AK Schofield Barracks, HI Camp Dodge, IA Camp Ripley, MN Camp Atterbury, IN Ft. Indian Town Gap, PA Ft. Benning, GA Qualification. The MT-C2 must be qualified and able to demonstrate compliance with the performance specification, system requirements, and technical data provided within the Technical Data Package (TDP). The TDP will be provided with the solicitation as Government Furnished Information (GFI). All interested parties are asked to respond to the following as relevant to their solution or other information they wish to provide: 1) Provide past and present (within the last 5 years) relevant experience on similar contracts, indicating if it was in the U.S.A. or in a foreign country (include dollar value, complexity and point of contact), and a detailed description of capabilities to perform the effort. 2) Provide past and present (within the last 5 years) experience in fielding a program at multiple locations simultaneously. 3) Provide your specific experience or the experience of a potential team member regarding the integration and fielding of Government off-the-shelf (GOTS) systems. 4) Provide your specific experience or the experience of a potential team member in the development of software code to enable control and interaction with commercial-off-the-shelf (COTS) strobe lights, smoke machines, medical training manikins, and audio equipment. 5) Provide your specific experience in modifying the existing JAVA-based GOTS software to meet the capabilities required for this contract . 6) Provide your specific understanding or the understanding of a potential team member in Live Training Transformation (LT2) product line-based systems. 7) Provide your organization name, address, primary points of contact (POCs) and their email address, Web site address, telephone number, and type of ownership for the organization; and 2) Tailor capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. 3) Statement regarding current Small Business Administration (SBA) business size and socio-economic classification under NAICS code 333318 with an applicable size standard of 1000 employees. ELIGIBILITY The applicable NAICS code for this requirement is 333318 with a Small Business Size Standard of 1000 employees. After further review, the government is also considering an alternate NAICS of 541512 Computer Systems Design Services in support of MT-C2. Please provide justification supporting either 333318 and/or 541512. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than ten 8.5 X 11 inch pages, font no smaller than 12 point) demonstrating ability to provide the products/systems listed in this Technical Description. No phone or email solicitations with regards to the status of the future solicitation will be accepted prior to its release. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Dorothy Bryant at dorothy.a.bryant6.civ@mail.mil and the APM, Tony Prudhomme at tony.w.prudhomme.mil@mail.mil. Responses must be in either Microsoft Word or Portable Document Format (PDF), and received no later than 3:00 p.m. local time Orlando, Florida on 16 March 2018. Reference this synopsis number in subject line of e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.
-Market ResearchOpen
MODIFICATION 09/10/2019: The site visit point of contact has been changed to Petty Officer Shawn Culley (shawn.k.culley.mil@mail.mil). Please copy the Contract Specialist on all site visit requests. The Naval Air Warfare Center Training Systems Division (NAWCTSD) intends to competitively award a Firm Fixed Price task order for Contractor Operation and Maintenance Services (COMS) and Contractor Maintenance Services (CMS) in support of the Naval Aviation Survival Training Program at Naval Air Station Jacksonville, FL; Marine Corps Air Stations (MCAS) Cherry Point, NC; and Naval Station (NS) Norfolk, Norfolk, VA. The period of performance is anticipated to be 60 months, consisting of one (1) 7-month base year, which includes a two (2) month mobilization period, four (4) 12-month options, and one (1) 5-month period. Contract Start Date (CSD) is anticipated to be 01 June 2020. Anticipated Draft RFP Release Date: August 2019 Anticipated Pre-solicitation Conference/Site Visit: September 16th, 2019 Anticipated Award Date: February 2020 Anticipated Acquisition Strategy: Small Business Set-aside Other information: Site Visit Instructions: See attached document. PSC Code: J069 Predecessor Contract: N61340-10-D-2002-0003, Engineering Support Personnel (ESP) The Service Contract Act is applicable. Be advised that the aforementioned information is anticipatory in nature and is not binding. Further information will be provided, as it becomes known.
-SolicitationOpen
Pre-solicitation Conference slides - December 12, 2017
-Pre-SolicitationOpen

Additional Details

Solicitation Number

N6134017R0003

Archive Date

Dec 31, 2018

Office Address

ORLANDO, FL, 32826-3224