Notice ID: 53872f491ee149d384f4bc244f20f037Combined Synopsis/Solicitation
Notice of Sole Source to Educational Control Products
Archived on April 30, 2020. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM UTC−07:00
- Posted
- April 9, 2020
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 334510: Electromedical and Electrotherapeutic Apparatus Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAL POSTGRADUATE SCHOOL
- Place of performance
- Bell Canyon, CA, 91307
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N6227120Q1076
- Notice ID
- 53872f491ee149d384f4bc244f20f037
Description
The hardware/software upgrade is required to continue operating the ECP Model 205 Torsional Control System, which is used in the academic instruction of engineering control systems theory and in support of engineering courses. These systems have been in use for close to 20 years and, they need an upgrade to continue utilizing the systems for academic engineering courses. This requirement is for the upgrade of five (5 ea.) government-owned ECP Model 205 systems; with an optional quantity of four additional system (4 ea.) upgrades.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N6227120Q1076- Combined Synopsis
- Combined SynopsisCurrentApr 9, 2020
Notice of Sole Source to Educational Control Products
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
MTS Components IDIQ for Spares and Repairs | 59% | Awarded | Open |
This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR part 12 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Request for Quotation (RFQ) number is N66604-26-Q-0303. The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) intends to award a Firm Fixed Price (FFP), Indefinite Delivery/Indefinite Quantity (ID/IQ) contract to L3Harris Cincinnati Electronics Corporation (L3CE) on a sole source basis for repairs of the L3CE IR Sensor Assembly. L3CE is the only source that can conduct repairs to IR Sensors. This repair effort requires unique capabilities, equipment/tooling, and corporate and personnel expertise only L3CE as the original manufacturer with over 25 years of experience with this specific IR Sensor possesses presently. L3CE is the only responsible source capable of performing the required repairs based on a combination of the complexity of the effort and the ability to meet Government’s required timeline. This solicitation is not a request for competitive quotes. A determination not to compete this proposed requirement based on responses to this solicitation is solely within the discretion of the Government. Quotes received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement in the future. See attachment for more information. | 59% | Combined Synopsis | 07/16/2026 |
SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources to provide expert engineering support to trouble shoot process control system providing steam water and air. Must have expertise in process control plumbing and control valves for steam systems. Must have expertise in Allen Bradley PLC programming. The Government requests that responses be submitted electronically to mary.k.prebensen.civ@army.mil and Wesley.s.shaw.civ@army.mil by November 26th, 2026 by 5pm EST. Background: The Government (DEVCOM Soldier Center) is in need of expert engineering support to diagnose current PLC and piping system which support multiple hydraulic press systems. The existing system controls water, steam and air to molding tooling, and the PLC operates on custom Allen-Bradley control software. As it stands, the system is physically installed, however does not provide necessary temperature control in either manual or automatic modes. Issues may be traced to the original system design, pipe rack installation, PLC programming or some combination of the three. Description: Expert engineering services are sought to diagnose newly installed PLC control system to ensure that it can meet system design requirements, can be operated safely and reliably, and is adaptable for future operation and changing requirements. A new PLC system has been designed and installed per a list of system requirements, however is not able to control temperature per design requirements either due to control logic, poor valve selection or related piping design/installation. SC requires a 3rd party engineering service to validate as-built drawings against the installed system, verify/update PLC programming, provide necessary hardware changes to bring the system up to full operability. Specific System Specifications: Electric steam boiler provides 125psi dry steam as primary heat source for molding tooling. Standalone chiller provides chilled water at ~60 psi, and house air provides air for purge and mist functions. The Allen-Bradley PLC system controls the various media through a series of modulating valves to heat or cool the tooling. The PLC is intended to have recipe writing and management for automated control. Basic recipe for our process includes steam heat via pressure control to desired temperature setpoint, hold for ~1 hr while controlling temperature. The tooling is then cooled with chilled water at a controlled cooling rate. Our standard tooling includes an upper and lower platen, and the PLC has capability to control these independently. Additional system requirements will be included if there is a future RFP. Current known system issues: System will not maintain equivalent temperature for upper and lower platens during heat up or hold. System will not control cooling rate based on system feedback loop. System trend screen not displaying data correctly. System alarms remain untested. Mist function does not function without vibration of piping rack. Unique Vendor qualifications: Potential vendor must be US based and employ US citizens identified to work on the PLC system due to sensitivity of materials and products produced by the installation laboratory. Potential vendor must be licensed in process system design with specific expertise in steam controls. Potential vendor must be able to read modify and update Allen Bradly system code. Deliverables: Full system walkdown and comparison to As-built drawings. Analysis of system design, layout, valve selection, PLC operability as compared to provided list of system requirements. List of proposed design changes to meet system requirements and cost of implementation. Install required hardware and make required changes to system software. May subcontract for implementation of hardware changes. Provide updated As-built drawings for plumbing systems, electrical systems, PLC controls systems. System demonstration and verification to the As-built drawings provided Modified code in digital and hardcopy. Verified system manual. Full system demonstration and minimum 1 day training on system operation. Delivery Date: Government estimates work will be completed within 6 months of date of contract award. Government Furnished Property (Equipment/Materials/Information/Computer Utilization): All work to be performed on site at SC with access to existing PLC and piping rack. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM Soldier Center via e-mail to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 26th, 2026 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 20th, 2026 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement. | 51% | Market Research | 11/26/2026 |
Solicitation Notice: Sole Source BPA to OEM OEM: ASTRONICS TEST SYSTEMS INC 2652 MCGAW AVE IRVINE, CA 92614 CAGE: 21793 Due to proprietary information, data and equipment, no offers are being solicited. | 51% | Solicitation | 11/11/2026 |
This solicitation is issued with the intent of awarding Sniper CATP2 Option Years 6 & 7. The contractor shall provide efforts required for the management, engineering, production, fabrication, integration, Configuration Management (CM), test, test support, hardware and software upgrades, resolution of Diminishing Manufacturing Sources (DMS), and logistics support of the Sniper system to ensure a system availability rate and reliability Mean Time Between Maintenance Events (MTBME). The Contractor shall adhere to Contractor Quality System; ensuring it is an integral and integrated part of the Contractor's complete management system. The contract period of performance will be for two one-year options, and the Government intends to negotiate and award sole source to Lockheed Martin Corporation (CAGE 04939), 5600 West Sand Lake Road, Orlando FL 32819, in accordance with Revolutionary Far Overhaul (RFO) 6.103-1. All responsible sources may submit a capability statement of proposal, which shall be reviewed by the U.S. Government. A determination by the Government not to compete this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. In accordance with Air Force Instruction (AFI) 16-201, foreign participation is not permitted at the prime contract level. All potential offerors should contact the Contract Specialist/Procuring Contracting Officer for additional information, questions, and/or concerns. Place of performance will be at Robins Air Force Base, GA, or at contractor or subcontractor facilities. Interested Party of Person(s) may identify their interest and capability to respond to the requirement or submit a proposal(s). This solicitation is not a request for competitive proposals. All proposals received within the 15 days after issuance of solicitation will be considered. OMBUDSMAN: All potential offeror(s) should contact the Primary Point of Contact listed in this notice for additional information and/or to communicate concerns, if any, concerning this acquisition. If the contracting officer does not satisfy your concerns, an Ombudsman has been appointed to hear serious concerns that are not resolved through established channels. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate serious Contractor concern, issues, disagreements, and recommendations to appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. When appropriate potential offeror(s) may contract Nicole Furlough at nicole.furlough@us.af.mil or 478-222-1088. Please be prepared to identify previous contacts made by you in an attempt to resolve your concerns. | 51% | Solicitation | 11/20/2026 |
Additional Details
Solicitation Number
N6227120Q1076
Archive Date
Apr 30, 2020
Office Address
MONTEREY, CA, 93943-5098