GovChime
Notice ID: 132b21530f8dd36d3279cdc0c8618aebAward NoticeAwarded

Z--8(a) Exterior/Interior Painting Multiple Award Construction Contract (MACC), Various Locations, State of Hawaii.

Awarded on October 25, 2010. Full description on SAM.gov.

Awarded tounder N62478-11-D-4032 thru 4035 (source: SAM.gov award notice)• $30.0M

Overview

Posted
October 27, 2010
Notice type
Award Notice
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVFACSYSCOM HAWAII
PSC
Z: MAINT, REPAIR, ALTER REAL PROPERTY
Last updated
Dec 5, 2025
Award date
Oct 25, 2010
Award amount (SAM.gov award notice)
$30.0M

Identifiers

Solicitation number
N6247810R4023
Notice ID
132b21530f8dd36d3279cdc0c8618aeb
Award number (PIID)
N62478-11-D-4032 thru 4035

Description

TMGE, LLC, Kapolei, Hawaii (N62478-11-D-4032); Kapili Construction, LLC, Wahiawa, Hawaii (N62478-11-D-4033); Covenant-Society, LLC, Honolulu, Hawaii (N62478-11-D-4034); and DSJV, LLC, Kailua, Hawaii (N62478-11-D-4035), were each awarded an indefinite-delivery/indefinite-quantity multiple award construction contract for painting projects located primarily within the Naval Facilities Engineering Command (NAVFAC) Hawaii area of responsibility (AOR). The maximum dollar value, including the base period and four option years, for all four contracts combined is $30,000,000. The work to be performed provides for, but is not limited to, preparing surfaces, priming, providing exterior and interior coatings to buildings and other structures. It also includes providing fluid applied resilient (resinous) flooring for various interior and exterior surfaces. The work will be for the Navy, Marine Corps, Air Force and various federal agencies located in the state of Hawaii. All work on this contract will be performed in the NAVFAC Hawaii AOR. The term of the contract is not to exceed 60 months, with an expected completion date of October 2015. This contract was competitively procured via the Navy Electronic Commerce Online website, with five proposals received. These four contractors may compete for task orders under the terms and conditions of the awarded contracts. The Naval Facilities Engineering Command, Hawaii, Pearl Harbor, Hawaii, is the contracting activity.

Full description on SAM.gov

Award Overview

Award Number

N62478-11-D-4032 thru 4035

Award Amount (SAM.gov award notice)

$30.0M

Award Date

Oct 25, 2010

Awardee

Original Solicitation

Notice ID: 132b21530f8dd36d3279cdc0c8618aeb

Posted Date: Oct 27, 2010

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Contracting Officer

Primary Contact

Colin Suyama (808)471-1059

Documents

No documents available.

Lifecycle

Solicitation:N6247810R4023
  1. Pre-Solicitation
  2. Solicitation
  3. Awarded

This opportunity has been awarded.

  1. 5×
    Pre-SolicitationApr 22, 2010

    Z--Exterior and Interior Painting Multiple Award Construction Contract (MACC), Various Locations, State of Hawaii

    Notice c90d6e4a8c6e7fe736ccf1cbdf235784 on SAM.gov

  2. SolicitationJul 22, 2010

    Z--Exterior and Interior Painting Multiple Award Construction Contract (MACC), Various Locations, State of Hawaii

    Notice 2a80c45d94dcb796e8322d23569cffd3 on SAM.gov

  3. AwardedCurrentOct 27, 2010

    Z--8(a) Exterior/Interior Painting Multiple Award Construction Contract (MACC), Various Locations, State of Hawaii.

    Notice 132b21530f8dd36d3279cdc0c8618aeb on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a Sources Sought Notice for information only: This is not a request for quotes/proposals or an invitation for bids. In accordance with Revolutionary FAR Overhaul (RFO) 10.001, this Sources Sought Notice is for market research and information purposes only at this time and shall not be construed as a solicitation or as an obligation. This notice is to determine the availability of small businesses (including the following subsets, Small Disadvantaged Businesses, HUBZone Firms; Certified 8(a), Service- Disabled Veteran-Owned Small Business and Woman Owned Small Business) to provide the required services. Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility (PHNSY & IMF) is issuing this sources sought synopsis as a means of conducting market research to seek eligible contractors to provide technical assistance services to the Shipyard, to provide specialized on-site technical assistance services to the Shipyard, during on load, reassembly, reinstallation, and testing of the high-pressure, oil-free air compressors (Model 5R5-75B), manufactured by RIX Industries, using Advanced Equipment Repair Program (AERP) assets provided by the Government Project. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336611 – Ship Building and Repairing and the small business size standard is 1,300. The Product Service Code is J020 - Maintenance, Repair, and Rebuilding of Equipment – Ship and Marine Equipment. This request for capability information does not constitute a request for proposals. Submission of any information in response to this market survey is purely voluntary. The government assumes no financial responsibility for any costs incurred. If your organization has the capability of performing these services, please provide the following information: Organization name, address, email address, website address, telephone number, size and type of ownership for the organization, CAGE code, SAM Unique Entity ID; and Tailored capability statement addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. To be evaluated for technical merit and capability, statements must be received by the stated deadline. In determining whether or not to compete this requirement, the Government has sole discretion. Submission Instructions: Interested parties who consider themselves qualified to perform requirements in accordance to the attached draft Performance Work Statement are invited to submit a response to this Sources Sought Notice by 03:00 PM HST on 13 November 2026. All questions and responses regarding this Sources Sought Notice must be emailed to the point of contacts below.
-Market Research11/13/2026
AMENDMENT 11/10/2026 Answers to questions received posted (see attachment) ******************************************************************** Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility (PHNSY & IMF) is a naval industrial facility that generates various non-hazardous wastes in the process of altering, repairing and maintaining the U.S. Navy’s vessels and facility buildings/structures. Although these wastes generated are not regulated by the Environmental Protection Agency (EPA) as hazardous waste, they do require proper management (i.e., processing, handling and disposal) to ensure that PHNSY & IMF is in compliance with all federal, state and local environmental rules and regulations. PHNSY & IMF requires a contractor to dispose of Rubber and Polyethylene Products on a regular basis to a licensed and authorized landfill facility on the Island of Oahu, State of Hawaii. The non-hazardous wastes consist of the following categories: NON-HAZARDOUS WASTES SUMMARY TABLE Waste Description Max Load/Year Total Tons/Year Rubber and Polyethylene Products 40 250 (e.g., Hoses, Mats, Sheets) Type of Method of Containment: Loose material in dump trailer(s). Estimated net weight per load is 6 tons. Additional details and specifications can be found in the attached Performance Work Statement (PWS). The tentative period of performance for this service is 12/7/2026 –12/6/2027. The location of the performance is Joint Base Pearl Harbor Hickam, Hawai’i. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 562212, Solid Waste Landfill; the size standard for this NAICS is $47 million. Product Service Code is S205- Housekeeping – Trash/Garbage Collection). All firms or individuals responding must be registered with the System for Award Management (SAM) (https://www.sam.gov) by the award date. Please note the following: The solicitation number for this requirement is N32253-27-Q-0007 Quotes are due no later than Friday, 11/16/2026 at 7:00am HST. Quotes must be sent via email to both the primary and secondary points of contact. The Government may revise the solicitation at any time by means of an Amendment. It is an offeror’s responsibility to ensure it is accessing the Government Point of Entry (GPE) website,􀀁 https://sam.gov/, to view potential amendments and procurement notifications for this solicitation. Contract award will be in accordance with FAR 52.212-2 as stated in the solicitation. All questions regarding solicitation N32253-27-Q-0007 shall be submitted in writing via email to the listed POCs. Questions are due 11/10/2026 8:00AM HST.
-Combined Synopsis11/16/2026
THIS IS NOT A SOLICITATION. THIS IS A REQUEST FOR INFORMATION ONLY. SEE ATTACHMENTS FOR FULL DETAILS. The anticipated project includes, but is not limited to: • Furnishing and installing a large roll-up door within an existing non-load-bearing concrete masonry unit (CMU) wall. • Demolition, cutting, removal, framing, finishing, and related work necessary to create the new door opening. • Relocation and/or modification of affected utilities, including electrical power, compressed air, and water lines. • Relocation of an existing air-conditioning unit and associated ductwork to accommodate installation and operation of new equipment. • Restoration of affected interior and exterior finishes. • Coordination of work in an operational facility and compliance with installation access, safety, environmental, and utility-outage requirements. See the attached questionnaire for full details available at this time.
-Market Research12/01/2026
The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements. The Naval Facilities Engineering Systems Command, Hawaii (NAVFAC Hawaii) is conducting market research to determine if other potential products/services can provide for a centrifugally cast fiberglass-reinforced polymer mortar (CCFRPM) pipe that has the equal performance and listing/approval requirements as the HOBAS pipe (CCFRPM pipe), manufactured by HOBAS Pipe USA, Inc., 1413 E. Richey Road, Houston, Texas 77073-3508. The alternate product/service must meet the following requirements and specifications: Centrifugally cast fiberglass-reinforced polymer (CCFRPM) pipe, manufactured and tested in accordance with ASTM D3262. Pipe sizes shall be 24-inch (DN 600, 25.8-inch OD) and 42-inch (DN 1050, 45.9-inch OD) nominal diameters. Manufactured by the centrifugal casting process to result in a dense, uniform, non-porous, corrosion-resistant, consistent composite structure. Interior surface of the pipe exposed to untreated sewer flow must provide crack and abrasion resistance. Exterior surface of the pipe must be comprised of a sand and resin layer that provides ultraviolet (UV) protection to the pipe exterior. Pipes must be Type 1, Liner 2, Grade 3 per ASTM D3262. Coupling joints must meet the requirements of ASTM D4161. Minimum pipe normal stiffness (SN) when tested in accordance with ASTM D2412 must be 46 pound per square inch (PSI). Resin System: Manufacturer must use only polyester resin systems with proven history of performance in this application. Historical data must be acquired from a composite material or similar construction and composition as the proposed product. Glass Reinforcement: The reinforcing glass fibers used to manufacture the components must be of the highest quality commercial grade E-glass filaments with binder and sizing compatible with impregnating resins. Silica Sand: Sand must be minimum 98% silica with a maximum moisture content of 0.2%. Additives: Resin additives, such as curing agents, pigments, dyes, fillers, and thixotropic agents, etc., when used, must not detrimentally affect the performance of the product. Elastomeric Gaskets: Gaskets must meet ASTM F477 and be suitable for the intended service. This notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes, or invitation of bids or award a contract. Interested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system. Technical response shall be typed, at least 11 point Times New Roman or larger, single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format. Also, provide company information and point of contract (name, title, email, phone, mailing address). The Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement. Any information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit your company brochure. Interested parties shall submit information and specifications to Ms. Isabella Chong-Navarre, Contract Specialist via email at isabella.a.chong-navarre.civ@us.navy.mil and Ms. Jessica Shimoda, Contract Specialist via email at Jessica.a.shimoda.civ@us.navy.mil. Interested parties responding to this announcement by 17, November 2026 at 10:00 A.M. Hawaii Standard Time will be considered.
-Market Research11/17/2026
Pearl Harbor Naval Shipyard and IMF is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for annual operational verification testing in accordance with the attached Performance Work Statement. This request for capability information does not constitute a request for proposals. Submission of any information in response to this market survey is purely voluntary. The government assumes no financial responsibility for any costs incurred. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 811310. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) organization name, address, email address, website address, telephone number, and size and type of ownership for the organization; and 2) tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. To be evaluated for technical merit and capability, statements must be received by the stated deadline. In determining whether or not to compete this requirement, the Government has sole discretion. Submission Instructions: Interested parties who consider themselves qualified to perform requirements in accordance to the attached draft Performance Work Statement are invited to submit a response to this Sources Sought Notice by 14:00 HST on 12 November 2026. All questions and responses regarding this Sources Sought Notice must be emailed to fiona.c.lynch.civ@us.navy.mil.
-Market Research11/12/2026

Additional Details

Solicitation Number

N6247810R4023

Archive Date

Nov 9, 2010