GovChime
Notice ID: 116dbb5a6d5c4d7a82f3d31278681624Sources SoughtArchived

MH-60R/MH-60S Aircraft Maintenance and Repair

Archived on December 19, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM JST
Posted
November 18, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSUP.NAVSUP GLOBAL LOGISTICS SUPPORT.NAVSUP FLC YOKOSUKA.NAVSUP FLT LOG CTR YOKOSUKA
Last updated
Nov 6, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
N6264926Q0H60
Notice ID
116dbb5a6d5c4d7a82f3d31278681624

Description

Fleet Logistics Center Yokosuka (FLCY) and Fleet Readiness Center Western Pacific (FRC WESTPAC) are seeking interested contractors with MH-60R/MH-60S maintenance experience to provide Scheduled and Unscheduled Maintenance, Repair and Overhaul (MRO) services for United States Navy MH-60R/MH-60S aircraft forward deployed in the U.S. Indo-Pacific Command (USINDOPACOM) Area of Responsibility (AOR).

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • H60_SourcesSought_2025Nov18.pdf

    128 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    MH-60R/MH-60S Aircraft Maintenance and Repair

    Notice 116dbb5a6d5c4d7a82f3d31278681624 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
***Start of Notice Update 20261020 The purpose of this update is to provide Government responses to follow-up industry questions provided via e-mail 14 October 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 3. ***End of Notice Update 20261020*** ***Start of Notice Update 20260917*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 2. This notice also updates to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 29 July 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about first quarter FY 2027, with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260917*** ***Start of Notice Update 20260821*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 1. ***End of Notice Update 20260821*** ***Start of Notice Update 20260730*** The purpose of this update is to provide Government responses to industry questions discussed during the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting. ***End of Notice Update 20260730*** ***Start of Notice Update 20260729*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about late fourth quarter FY 2026, with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260729*** ***Start of Notice Description 20260709*** NOTE - The Solicitation number for the E-6B Maintenance, Repair and Overhaul (MRO) effort has been updated to N0001926R1039. The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts a DRAFT Request for Proposal (RFP) for the PMA-271 E-6B Mercury Depot MRO effort. This notice is a follow-on to the E-6B MRO Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. NAVAIR intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of work under this IDIQ contract will include performing scheduled and unscheduled depot maintenance tasks and repairs in accordance with the Planned Maintenance Interval Specification, aircraft modifications via technical directives and engineering change proposals, and material fabrication. This effort will also include aircraft inductions for standalone drop-in modifications and repairs and a Contractor Field Team to support modifications and repairs offsite. Anticipated award is third quarter of Government Fiscal Year (FY) 2027. The 24 July 2026 response date identified in this posting is the response date for receiving Industry comments and questions associated with the DRAFT RFP. The DRAFT RFP, including all attachments, will be posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The intent of this posting is to solicit feedback from Industry on the DRAFT RFP and associated attachments prior to issuing the final RFP. Please submit questions using the file named “Draft RFP Question and Answer form_Offeror Name.xlsx” and replace Offeror Name with your Company name. This file is posted in the Solicitation Module of the U.S. Government PIEE and will be accessible with the DRAFT RFP and associated attachments after Offerors are granted access following the procedures set forth under “Access to documents”. Please submit questions not later than 24 July 2026. Any proprietary information provided in the questions or comments shall be marked or annotated accordingly. Classified material SHALL NOT be submitted. Access to documents – The DRAFT RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to the DRAFT RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, company name, address, and Commercial and Government Entity (CAGE) Code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module), as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the DRAFT RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the DRAFT RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the DRAFT RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Distribution of CUI by a potential Offeror to that potential Offeror’s team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a “need to know” basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls, and distribution statements associated with the document. *************************************************************************************************** Additionally, NAVAIR is providing an opportunity for vendors to attend a Virtual Pre-Solicitation Conference and virtual One-on-One meetings to discuss the DRAFT RFP and associated attachments on 29 July 2026 and 30 July 2026, beginning at 08:00:00 AM (Eastern Time) and ending at 15:00:00 PM (Eastern Time) via Microsoft Teams. The Virtual Pre-Solicitation Conference and One-on-One Meetings will be held at the unclassified level. To attend either or both meetings, register via email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (David.t.guy.civ@us.navy.mil) by 24 July 2026 at 05:00:00 PM (Eastern Time). Pre-Solicitation Conference is open to all interested parties (potential Offerors and Subcontractors) One-on-One Meetings are open only to potential Prime Offerors Registration for either meeting must be completed in advance and is required for participation. Registration must include a list of attendees (name, title, phone number, and email). Exceptions will not be made for late registration. Changes to the registration information (cancellation or substitution) can be made up until 12:00:00 PM (Eastern Time) on 27 July 2026. Registration requests received after the deadline will not be accepted. Registered companies will be notified via email on or about 27 July 2026 with the time and information on how to join each session. Participation in the virtual meetings is neither mandatory nor is it a prerequisite to future participation by a potential Offeror in any potential future solicitations/contracts. DISCLAIMER PURSUANT TO FEDERAL ACQUISITION REGULATION (FAR) 15.101(b), THIS NOTICE IS BEING ISSUED FOR A DRAFT RFP. THE DRAFT RFP IS SOLELY FOR INFORMATION AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE AN RFP OR A PROMISE TO ISSUE AN RFP IN THE FUTURE. THE DRAFT RFP DOES NOT COMMIT THE GOVERNMENT TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. THE FINAL REQUIREMENT WILL BE DEFINED UNDER A FORMAL RFP. FURTHER, THE NAVY IS NOT AT THIS TIME SEEKING PROPOSALS AND WILL NOT ACCEPT UNSOLICITED PROPOSALS. RESPONDENTS ARE ADVISED THAT THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION OR ADMINISTRATIVE COSTS INCURRED IN RESPONSE TO THIS PRESOLICITATION NOTICE. ALL COSTS ASSOCIATED WITH RESPONDING TO THIS ANNOUNCEMENT WILL BE SOLELY AT THE EXPENSE OF THE INTERESTED PARTY. IT IS THE RESPONSIBILITY OF THE POTENTIAL OFFERORS TO MONITOR THIS WEBSITE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. ***End of Notice Description 20260709*** ***Start Presolicitation Update 20260409*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 14 January 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of May 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about mid fourth quarter 2026, with a tentative closing date 30 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End Presolicitation Update 20260409*** This notice is an update to the E-6B Enhanced Phased Maintenance-Heavy (EPMH) Overhaul and Repair Sources Sought Notice N00019-25-RFPREQ-APM271-0012 posted on 30 May 2024, and the Special Notice of questions for interested party response posted on 11 August 2025. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around 24 April 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about 24 June 2026, with a tentative closing date of 08 August 2026. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice.
92%
Pre-Solicitation11/30/2026
AMENDMENT 0007 - The purpose of this amendment is to extend the proposal due date to 08 December 2026. Please access Amendment 0007 via the PIEE Solicitation Module link listed within the Attachments section of this notice.
89%
Solicitation12/08/2026
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YON-325. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YON-325 • Length: 199 FT • Width: 54 FT • Height: 15 FT • Age: 21 YRS • Hull Type: Steel • Draft: 3 FT • Full Displacement: 2,848 L Tons • Light Load: 706 L Tons Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer’s Representative (COR) to deliver the vessel from Manchester Fuel Depot to the Contractor’s facility. Dock, wash, and clean exterior surfaces of the vessel upon docking. Replace zinc anodes on hull / Skegs. Accomplish preservation to Underwater Hull, Freeboard, Main deck, Deck house, Cargo piping and all deck fittings. Clean non-skid located Main deck, Deck house top and Cargo deck. Remove, clean and install Rubber fenders. Modify existing Piping eliminate Aft Flow Meter and insert spool. Accomplish Ultrasonic test measurement and visual inspection of the hull, Main deck, Cargo deck and Deck house top. Open, Clean, Pump and maintain clean and dry each tank/void. Inspect tanks/voids for defects Refresh Exhaust Muffler for Yanmar and Main Engine. Replace Solar Panels. Remove Antenna Support Modification. Replace Fuel Oil Tank Piping. Replace and Calibrate Cargo Tank Level Indicator’s (TLI’s). Perform Preliminary Air test of Tanks/voids/Steel Fendering and Skegs. Accomplish a final closure inspection of each tank/void upon completion of all work installing new gaskets and fasteners. Perform Final Air Test of Tanks/voids/Steel Fendering and Skegs. Accomplish repair, replace gaskets, and adjust watertight hatches and doors. Accomplish Cargo Pump Diesel and Diesel generator maintenance and repair. Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR. Calibration of TLI’s, shall be conducted at Manchester Fuel Depot (MFD) in Manchester, WA. YON-325 Prime Period of Performance: Estimated August 2027 through November 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with "Maintenance, Repair, and Preservation of YON-325 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of YON-325 package? 5. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA)? When to Submit: Responses are requested no later than 12:00PM PT, on 18 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.
83%
Market Research11/18/2026
The Regional Maintenance Center at Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS & IMF) is conducting market research to determine industry capability and interest in performing the maintenance, repair, and preservation of YT-812. Work will be accomplished at the Contractor's facility. The Government is seeking responses from sources that can perform the following work. Geographical Area of consideration: To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YT-812 • Length: 90 FT • Width: 38 FT • Age: 4 YRS • Hull Type: Steel • Draft: 16 FT • Full Displacement: 494 L Tons • Light Load: 438 L Tons Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the vessel to the Contractor’s facility. The Government will transport the vessel to the Contractor’s repair facility. Upon docking vessel, wash, and clean vessel. Replace zinc and impressed anodes. Blast and preserve underwater hull and freeboard, bulwarks, and handrails. Blast and preserve main deck, 1st deck, and 2nd deck non-skid. Perform hull and freeboard Ultrasonic Test (UT) inspections. Perform hull and freeboard, main deck, 1st deck, and 2nd deck Visual Inspections (VT). Repair hull and winch valves. Repair deckhouse expansion joint. Open, pump, clean, inspect and test CHT, ballast, potable water, fuel oil, waste oil and day tanks. Preserve, disinfect and certify the potable water tank. Onload fuel. Repair HVAC thermostat. Replace deck winch, mast, and brow systems hydraulic hoses. Accomplish 1- and 5-year interval inspection and repair requirements for port and starboard Schottel Z-drive units. Accomplish repairs to the port and starboard twin disc transmission coolers. Accomplish winch control piping modification (YT808-0104D), air piping modification (YT808-0105D), potable water hose bibb drain valve installation (YT808-0107D), and automatic voltage regulator installation (YT808-0109D). Undock the vessel. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the SUPERVISOR. Upon completion of all work the Government will take custody of the vessel. To facilitate proper government oversight, the facility where the work will be performed shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the west of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. YT-812 Availability: Estimated July 2027 through September 2027 What/Where to Submit: Interested companies should submit, on company letterhead, a notice of interest including the name, telephone number, mailing address, and e-mail address of one point of contact. Please hand or digitally sign your letter of interest and e-mail it to the Government contacts listed below, with " Maintenance, Repair, and Preservation of YT-812 Sources Sought Response" in the subject field. The notice of interest should include a brief description of your company and its capabilities as they relate to the requirements set forth in the description shown above, and answers to the following specific questions. Please limit your response to no more than 5 pages. 1. Is your company a small or large business as defined by the Small Business Administration (SBA) under NAICS code 336611 (a small business must have 1,300 or less employees)? 2. Does your company have a satisfactory performance record for the type of work required? Please provide examples of relevant and recent (within three years) past performance. 3. Does your company have the necessary organization, experience, accounting and operational controls, and technical skills, or the ability to obtain them (including, as appropriate, such elements as production control procedures, property control systems, quality assurance measures, and safety programs applicable to materials to be produced or services to be performed by the prospective contractor and subcontractors)? 4. Does your company have a current Agreement for Boat Repair (ABR) or Master Ship Repair Agreement (MSRA) issued by Naval Sea Systems Command (NAVSEA)? 5. Given the work described in this announcement, does your company plan to submit a quotation in response to the anticipated solicitation for the Maintenance, Repair, and Preservation of YT-812 package? When to Submit: Responses are requested no later than 12:00PM PT, on 3 November 2026. Notice Regarding Sources Sought: This sources sought is issued solely for information and planning purposes - it does not constitute a Request for Quotation (RFQ) or a promise to issue an RFQ in the future. This sources sought does not commit the Government to contract for any supply or service whatsoever. Further, the Navy is not seeking quotations at this time, nor accepting unsolicited quotations. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this source sought; all costs associated with responding to this source sought will be solely at the interested party's expense. Not responding to this sources sought does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized on the SAM website (sam.gov). It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement. Information provided shall be treated as Business Sensitive or Confidential to the responder, exempt from public release under the Freedom of Information Act. PSNS&IMF may request further information regarding the capabilities of respondents to meet the requirements set forth in the announcement. Information provided in response to this sources sought announcement will not be considered an offer by the responding contractor and cannot be accepted by the Government to form a binding contract.
83%
Market Research11/03/2026
22 October 2026- Response to RFC 001 has been posted. ________________________________ The Regional Maintenance Center at Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS and IMF) intends to award a stand-alone Firm-Fixed-Price contract to accomplish maintenance, repair, and preservation of IX-551. The IX-551 characteristics are Length: 260 FT, Width: 85 FT, Age: 10 Years, Hull Type: Steel, Draft: 8 FT 6 IN, Full Displacement: 3,070 L Tons and Light Load: 2,267 L Tons. The Contractors facility must possess the capability of IX-551 with the dimensions as stated above. To facilitate proper government oversight, the facility shall be located in the Puget Sound, WA region. For this procurement, the Puget Sound, WA region is defined as the West Coast of the continental US, starting from Olympia, WA and extending northward to Bellingham, WA. Scope Overview: Coordinate with the Contracting Officer, via the SUPERVISOR to deliver the Asset to the Contractors facility. Upon docking the Asset, wash, and clean the exterior surfaces of the Asset. Blast and preserve all exterior hull surfaces, underwater body, freeboard, moon pools and bulwark surfaces of the Asset. Fill, drain, air test, inspect each underwater skeg on the Asset. Accomplish visual inspections of hull and body and all tank/voids. Remove existing and install new zinc anodes and hardware on the underwater hull. Shift the Asset on the blocks to achieve 100 percent preservation of underwater hull. Apply non-skid system to main deck and 02/03 level decks. Accomplish preliminary and final air tests to tanks/voids. Open, pump, ventilate, gas free and clean all tanks. Accomplish partial preservation of Qty (24 EA) tanks. Preserve tank/void manhole covers. Identify distinguishing figures and markings, Remove, clean and reinstall rubber fenders. Open and inspect all pumps and overboard discharge valves. Accomplish visual inspection and final closeout inspection of each tank/void upon completion of all work. Install new manhole gaskets and fasteners. Undock the Asset. Arrange and coordinate the delivery of the Asset back to the Government with the Contracting Officer via the SUPERVISOR. Specific details of all work items and tasks required by this Statement of Work or described in this Scope Overview are included in section 3.0 of the Statement of Work. The IX-551 will be ready for pick up on or after 1 April 2027. Refer to page 1 Request for Quote (RFQ) of the Solicitation regarding desired and required delivery information. This is full and open competition. All offerors must be registered with the System for Award Management (SAM) to receive award of Government contracts. Offerors are advised also that SAM representations and certifications can be completed electronically via the System for Award Management website at https://www.sam.gov.
83%
Combined Synopsis10/28/2026

Additional Details

Solicitation Number

N6264926Q0H60

Archive Date

Dec 19, 2025

Office Address

FPO, AP, 96349-1500