GovChime
Notice ID: 105ef47138180c1f7c2c3e9ec582b707Combined Synopsis/Solicitation

H--Linear positioning equipment and motion control platforms used on the RAM block II rocket motor automated inspection fixture. Must be PARKER & ACS items ONLY....

Archived on February 8, 2012. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC+02:00
Posted
August 9, 2011
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
Agency
Department of WarDepartment of the Navy

Notice details

Office
COMMANDING OFFICER
Place of performance
1999 Fourth Street , Norco, CA 92860 US
PSC
H: QUALITY CONTROL, TEST, INSPECTION
Last updated
Dec 5, 2025

Identifiers

Solicitation number
N6339411T5067
Notice ID
105ef47138180c1f7c2c3e9ec582b707

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement is the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation number is N63394-11-T-5067 and is issued as a request for quotation (RFQ). This acquisition is firm-fixed price and is 100% set-aside for small business. The Government will award to the responsible offeror whose offer conforms to the requirement as stated in this synopsis and is the most advantageous to the Government based on the lowest price and technically acceptable. NSWC, Corona Division has a requirement for Linear positioning equipment and motion control platforms used on the RAM Block II Rocket Motor Automated Inspection Fixture. The ATK facility at West Virginia has a requirement to inspect RAM Block II Rocket Motors critical features in order to ensure safe and accurate missile operation. Parker & Acs are the required brand for this requirement. These components are replacements of components on existing gages. Replacement components are required to interface with existing hardware and software. The specific requirements needed are as follows: Qty Brand Part# Part Description 1 ACS SPiiPlus CM-3-B-E-M0-NW Integrated motion control platform, 3-axis Position Range: ±4x1015 counts Velocity: 160x109 counts/sec Accuracy: 0.005% Acceleration: 4x1015 counts/sec2 Sampling Rate: 20 kHz Accuracy: ±1 count 1 ACS SPiiPlus CM-ACC CM-ACC series connector kit 1 Parker 803-9191A X-Y positioning system X-axis: 406XR Series linear positioning stage Travel: 2000 mm Grade: Standard grade Screw specs: 5mm Home sensor: Home sensor N.O. current sinking, Limit sensors: Limit Sensors N.C. current sinking Motor mount: NEMA 34 in-line mount Coupling: 0.50" bore bellows style Brake: No brake Y-axis: 404XR Series linear positioning stage Travel: 50 mm Grade: Standard grade Screw specs: 5mm Home sensor: Home sensor N.O. current sinking, Limit sensors: Limit Sensors N.C. current sinking Motor mount: NEMA 23 in-line mount Coupling: 0.375" bore bellows style Brake: No brake Precision: 1.3 µm 1 Parker MPP0922C1E-NPSN MPP Series brushless servo motor Frame size: 92mm, 2 stack Feedback: 2000 lin encoder (8000 ppr) Connections: PS style quick disconnect 1 Parker BE231DJ-NPSN BE Series brushless servo motor Frame size: NEMA 23, 2 stack Feedback: 2000 lin encoder (8000 ppr) Connections: PS style quick disconnect 1 Parker MPJ1002D1E-NPSN MPJ Series medium inertia brushless servo motor Frame size: 100mm, 2 stack Feedback: 2000 lin encoder (8000 ppr) Connections: PS style quick disconnect 2 Parker P-1A1-25 25 ft. motor power cable for BE231 & MPP0922 1 Parker P-3B1-25 25 ft. motor power cable for MPJ1002 motor 3 Parker F-9F1-25 25 ft. encoder feedback cable Shipping shall be included in the total cost of these items and must be delivered by 01 September 2011. Offeror must be registered in the Central Contractor Registration (CCR). The associated North American Industrial Classification System (NAICS) code for this procurement is 423830 with an associated small business size standard of 100 employees. Quotes are due no later than 2:00PM PST, August 8, 2011. Quotes must be valid for sixty (60) days after due date. Any amendment(s) issued to this RFQ will be published on this website. Therefore it is the offeror’s responsibility to visit this website frequently for updated on this procurement. This requirement will be awarded on a sole-source/brand name basis in accordance with the statutory authority 10 U.S.C.2304(c)(1) as implemented by FAR Part 6.302-1(4)(c). Any and all responsible source having the technical capabilities to meet the requirement described are encouraged to submit a quote along with their technical capabilities to include complete and detailed technical specification of their product, past performance information, price, and lead time, DUNS, CAGE, & TAX Id, for consideration via email to: Marlena.warren@navy.mil.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Marlena Warren 951-273-4496 Marlena Warren 951-273-4496 Vanessa Labyzon 951-273-4351 marlema.warren@navy.mil

Documents

No documents available.

Lifecycle

Solicitation:N6339411T5067
  1. Combined Synopsis
  1. 3×
    Combined SynopsisCurrentAug 2, 2011

    H--Linear positioning equipment and motion control platforms used on the RAM block II rocket motor automated inspection fixture. Must be PARKER & ACS items ONLY....

    Notice 105ef47138180c1f7c2c3e9ec582b707 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

N6339411T5067

Archive Date

Feb 8, 2012