Notice ID: b992718c31e1409282cdb2bc1e6e1b7fSolicitation
GBAD 30mm Ammunition
Archived on September 30, 2021. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−07:00
- Posted
- September 9, 2021
- Notice type
- Solicitation
- NAICS
- 332993: Ammunition (except Small Arms) Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAL SURFACE WARFARE CENTER
- Place of performance
- Crane, IN
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- N6426721Q0216
- Notice ID
- b992718c31e1409282cdb2bc1e6e1b7f
Description
The purpose of this amendment is to update the quantities required and to extend the solicitation. All other terms and conditions remain the same. The purpose of this amendment is to extend the solicitation. All other terms and conditions remain the same. This is a solicitation for noncommercial items prepared in accordance with the FAR part 13. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation. Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to graham.m.conlon@navy.mil Any amendment(s) issued to this Request For Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests. All requests must include company name, address, POC name, telephone number, fax number, cage code, Tax ID number, Business size, county and DUNS number.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
N6426721Q0216- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- 2×
- 3×SolicitationCurrentAug 17, 2021
GBAD 30mm Ammunition
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
| - | Solicitation | 12/09/2026 | |
The Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Contracts Department intends to issue a Firm-Fixed-Price (FFP) contract on a sole source basis to Northrop Grumman Systems Corporation. The NAICS is 332993. The Contractor shall develop and produce new Austempered Ductile Iron (ADI) 5 Inch Projectile Bodies compatible with the MK 45 Gun Weapon System. In accordance with 10 USC §4022, the Government will be awarding a follow-on FAR contract. The Naval Energetic Systems and Technologies (NEST) Request for Prototype Projects (RPP), under which this prototype OTA was awarded, included provisions for a follow-on production contract. The prototype OTA award for the ADI 5 Inch Projectile Bodies development and qualification was competitively awarded and the associated tasks mentioned above were delivered successfully and accepted by the Government as the basis for the prototype build. The participant in the OTA (Northrop Grumman Systems Corporation) successfully completed the prototype projects provided for in N001742390042. As such, the requirements of 10 USC §4022(f)(1) and DFARS 206.001-70 have been met and a follow-on contract for production can proceed without further competition. THIS NOTICE IS NOT A REQUEST FOR PROPOSAL. This acquisition is being pursued on a sole source basis under the statutory authority of 10 USC 4022(f)(1), as implemented in DFARS 206.001-70, Exception for prototype projects for follow-on production contracts. This notice of intent is not a request for competitive proposals nor does it restrict the Government from an ultimate acquisition approach; however, the Government will consider all responses received to this notice. A determination by the Government not to compete this requirement is solely within the discretion of the Government. This notice should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this survey. If a formal solicitation is generated at a later date, a solicitation notice will be published. All interested sources shall provide the organization name, address, point of contact, phone number, fax number, e-mail address, business size, taxpayer identification number, DUNS number, and CAGE Code. In addition, all interested sources shall provide a summary of their company’s capabilities. All responding sources must email their response submissions no later than 4:00 pm EST, 18 November 2026 to: Sean McAvoy, Contract Specialist NSWC IHD 3rd Avenue, Bldg. 61N Picatinny Arsenal, NJ 07806-5000 sean.p.mcavoy.civ@us.navy.mil | - | Special Notice | 11/18/2026 |
| - | Solicitation | 11/30/2026 | |
Paper copies will not be provided. Competitive, Full and Open Competition. Drawings are available. Drawings are NOT available on CD. A Safety Survey will be required. See solicitation for explosive weight and class. Base Quantity: 30 EA Option: 133.3 percent of base quantity. Please see amendmnet 0009. The solicitation is formally cancelled. No contracts will be awarded under this solicitation. | - | Solicitation | 07/28/2026 |
Request for Proposal to procure 57mm Target Practice (TP) Cartridges. The 57mm TP Cartridge is a 57mm, electrically-primed cartridge designed to function in the MK 110 Gun Mount (GM). The TP Cartridge consists of an inert projectile, a brass cartridge case, an electric primer, and propellant. Amendment 0001 posted 4-16-26. Amendment 0002 posted 4-30-26. Amendment 0003 posted 5-7-26. | - | Solicitation | 05/27/2026 |
Additional Details
Solicitation Number
N6426721Q0216
Archive Date
Sep 30, 2021
Office Address
NORCO, CA, 92860