GovChime
Notice ID: b075253506a946489b4b51124b88eef8Combined Synopsis/Solicitation

Gage Procurement

Archived on July 9, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−07:00
Posted
June 14, 2024
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333517: Machine Tool Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAL SURFACE WARFARE CENTER
Place of performance
Norco, CA, 92860
Last updated
Dec 4, 2025

Identifiers

Solicitation number
N6426724Q0200
Notice ID
b075253506a946489b4b51124b88eef8

Description

This is a solicitation for non-commerical items as a supplemented with additional information included in this notice. The announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation document incorporates provision and clauses of those in effect through Federal Acquisition Circular 2024-05 effective 22 May 2024. This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation. Offerors must be registered in SAM at the time of submission and all responsible sources may submit a quote which, if timely, may be considered by the Agency. Quotes are due no later than the response time and date in the posting. Responses shall be submitted electronically, PDF or MS Word Format to the email address in the posting. It is the responsibility of the Offeror to review the posting for any changes or amendments that may occur concerning this RFQ. It is the responsibility of the Offeror to ensure all quotes and/ or questions are submitted in a timely manner by the specified time and date. No gray market or remanufactured items will be acceptable. Gray market items are Original Equipment Manufacturers' (OEM) goods sold through unauthorized channels in direct competition with authorized distributors. This procurement is for new OEM equipment only. Vendor shall be an OEM, authorized dealer, authorized distributor or authorized reseller for the proposed items, verified by an authorization letter or other documents from the OEM. If applicable, all software licensing, warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N6426724Q0200
  1. Combined Synopsis
  1. Combined SynopsisCurrentJun 14, 2024

    Gage Procurement

    Notice b075253506a946489b4b51124b88eef8 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Army Contracting Command - Rock Island (ACC-RI) hereby issues Request for Quote (RFQ) W519TC-27-Q-A028 in accordance with Revolutionary Federal Acquisition Regulation (FAR) Overhaul (RFO) FAR Part 12 Acquisition of Commercial Products and Commercial Services for the procurement of Go / No-Go Thread Gages in support of Rock Island Arsenal – Joint Manufacturing and Technology Center (RIA-JMTC). Please see Solicitation for details in the Attachments Section.
78%
Solicitation11/09/2026
*The solicitation # has changed from N6893626Q5152 to N6893627Q0007 due to the new Fiscal Year (FY)* **Amendment 01 corrects the response date and time to 10/26/2026 at 4 PM PST** This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in the Revolutionary Federal Acquisition Regulations Overhaul (RFO) Part 12 and FAR Part 16, as supplemented with additional information included in this notice. This is a combined synopsis/solicitation for commercial products prepared in accordance with RFO Part 12. The Naval Air Warfare Center Weapons Division (NAWCWD) China Lake, CA facilitates a variety of weapons and energetics research, development, testing and evaluation programs in support of Naval operations. To accelerate cost-effective and rapid response methods, NAWCWD is awarding Blanket Purchase Agreements (BPAs) under Machine tools and Equipment and competing requirements through the Lakehurst BPA Tool to the BPA holders within each commodity. Please be aware that Synopsis/Solicitation N6893626Q5152 is updated to N6893627Q0007. N6893627Q0007 being issued as an invitation to small business concerns that are interested in becoming prospective vendors for the Machine Tools and Equipment found in attachment 1. In accordance with RFO Part 19, the Government’s intent is to establish BPAs with Small Businesses; therefore, this requirement is Set Aside for Small Business. The BPA Calls issued will incorporate clauses that are prescribed by the RFO, Defense Federal Acquisition Regulation Supplement (DFARS), and the Navy and Marine Corps Acquisition Regulation Supplement (NMCARS). Please note that a BPA is not a contract. A BPA is a method for filling anticipated repetitive needs for supplies by establishing “charge accounts” with qualified sources of supply. The Government is only obligated to the extent of authorized purchases actually placed under a BPA. All calls must be acknowledged by the selected vendors to be retained on the BPA calling list. This combined synopsis/solicitation will allow for the review of interested companies’ qualifications and result in the award of BPAs. The Government does not intend to pay for any information provided under this combined synopsis/solicitation. The Government is not obligated to notify respondents of the results of this combined synopsis/solicitation. Prospective vendors are invited to submit their responses to this combined synopsis/solicitation within the next 60 days, as vendors will be added on a rolling basis throughout the lifetime of the BPA commodities program. Once a contractor is issued a BPA there is no need to submit any response to subsequent combined synopsis/solicitation postings. Contractors are cautioned that their BPA may not be renewed or may be cancelled if the contractor is not actively participating in the program by submitting bids in the Lakehurst BPA Tool or consistently have poor performance. The maximum value of each individual purchase under a BPA may not exceed the Simplified Acquisition Threshold. Payments will be made using Government Purchase Credit (GPC) cards or electronic invoice submission IAW DFARS 252.232- 7006 “Wide Area Workflow Instructions (JAN 2023).” Third party payment systems will not be accepted. The Nonmanufacturer rule will apply to all nonmanufacturers in accordance with RFO FAR Part 19.104. A nonmanufacturer means any concern, including a supplier, that provides an end item it did not manufacture, process or produce. The contractor shall supply Machine Equipment and Tools to be delivered Free on Board (FOB) Destination terms to China Lake Applied Manufactured Technology Division (AMTD) located onboard NAWCWD China Lake, CA. It will be specified in the BPA Call. Attachment 1 includes a list of Machine and Tools with NAICS Codes but is not limited to just this list. Note: further requirements may be specified for each separate BPA Call. Delivery times will be specified at the BPA Call level. Interested parties shall provide their Cage Code and Unique Entity Identifier (UEID) Numbers for verification of inclusion in the System for Award Management (SAM) along with a capabilities statement. The capabilities statement should include what the contractor’s primary business practice/trade is, and whether the contractor is a manufacturer or a supplier/distributor. Responsibility determinations will also precede issuance of a BPA call and will be conducted in accordance with RFO FAR Part 9.1.
45%
Combined Synopsis10/26/2026
COMBINED SYNOPSIS/SOLICITATION #: N0017826Q6826Submitted by: James EmbreyNAICS Code: 333517FSC/PSC Code: 3620Anticipated Date to be published in SAM.gov: 07/28/2026Anticipated Closing Date: 08/06/2026Contracts POC Name: James EmbreyTelephone#: 540-498-5241Email Address: james.d.embrey3.civ@us.navy.milPSC/FSC Code and Description: 3620 ? Stratasys Pro J35Basis for award: _X_ Brand Name - FAR 6.103-1(d) ATTACH COPY __ Sole Source - FAR 6.103-1(b)__ Full and Open - FAR 6.101__ Total Small Business Set Aside - FAR 19.104-1 This is a combined synopsis/solicitation for commercial items or service prepared in accordance with FAR Part 12 using the publicizing requirements of FAR Part 5.This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued.Synopsis/Solicitation N0017826Q6826 is issued as a Request for Quotation (RFQ). The provisions and clauses incorporated in this solicitation are those in effect through the Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement as of the date of issuance and are included in the attached SF 1449.For commercial acquisitions using simplified procedures under FAR Part 12, Buy American applies unless the value exceeds the applicable Trade Agreements threshold, in which case Trade Agreements apply ? except where an exception applies.The Naval Surface Warfare Center Dahlgren Division (NSWCDD) intends to procure products/service manufactured by Stratasys Inc. See the attached Requirements List, SOW. Stratasys Inc is located in Minnetonka, MNThe replacement model is the only model that has demonstrably been able to manufacture certain parts required to meet specifications. The J35 Pro creates functional prototypes and parts faster than standard desktop resin 3D printers allowing up to three (3) different materials simultaneously on a single tray in one continuous print.All costs associated with this requirement must be included in the quoted price. This includes shipping and freight to Dahlgren, VA 22448-5114 as well as any tariff or duty charges. No additional costs may be added after award. Where applicable, DFARS 252.225-7013, Duty-Free Entry, will be incorporated. The Government will utilize Simplified Acquisition Procedures, and the order will be issued on a firm fixed-price basis.All responsible offerors shall submit a quotation in response to this solicitation. By submission of a quotation, the offeror represents compliance with the applicable representations and certifications, which are incorporated by reference and completed in the System for Award Management (SAM), as applicable. Submission of a quotation shall constitute the offeror?s unconditional agreement to the terms and conditions of this solicitation. The offeror shall provide documentation from the Original Equipment Manufacturer (OEM) confirming the offeror is an authorized reseller or distributor of the brand-name item(s) quoted. Quotations submitted without such documentation may not be considered for award. Quotations that take exception to the terms and conditions of this solicitation may be rejected.Offerors are encouraged to submit published pricing, historical pricing data, or other information to support the Government?s price analysis and determination of fair and reasonable pricing. Quotes will only be accepted from authorized re-sellers who have provided a Letter of Authorization. Award will be made on a Lowest Price Technically Acceptable basis.In order to be eligible for award, firms must be registered in the System for Award Management (SAM). Offerors may obtain information on registration in SAM by calling 866-606-8220, or via the Internet at https://www.sam.gov. Proposal is due by 06 August 2026, no later than 12:00 p.m. EST with an anticipated award date by 31 August 2026. Questions and responses regarding this synopsis/solicitation may be submitted by e-mail to james.d.embrey3.civ@us.navy.mil prior to the RFQ closing. Email should reference Synopsis/Solicitation Number N0017826Q6826 in the subject line.Attachments ? -Redacted SOW-SF1449: Solicitation/Contract/Order for Commercial Items
38%
Combined Synopsis08/06/2026
LBNL’s Engineering Division provides advanced mechanical engineering, fabrication, and manufacturing support for scientific research across multiple DOE Office of Science facilities and programs. A large format wire EDM system supports this mission by enabling high-precision, non-contact machining of oversized, complex, or high-density components such as accelerator structures, detector chassis, superconducting magnet components, and specialized tooling ensuring parts meet the strict geometric tolerances, surface finish requirements, and material integrity essential for scientific instrumentation.
36%
Market Research11/18/2026

Additional Details

Solicitation Number

N6426724Q0200

Archive Date

Jul 9, 2024

Office Address

NORCO, CA, 92860