Camp Pendleton Generator Maintenance
Archived on October 11, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM PDT
- Posted
- September 25, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- No Set aside used
- NAICS
- 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVSEA.NAVSEA WARFARE CENTER.NAVAL SURFACE WARFARE CENTER
- Place of performance
- Camp Pendleton, California
- Last updated
- Nov 7, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- N6426725Q4209
- Notice ID
- 6d2565a3d0b246769b6a133c9c955d47
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular Federal Acquisition Circular FAC 2025-05 August 7, 2025 . The provisions at 52.212-1, 52.212-3 and the clauses at 52.212-4, 52.212-5 apply to this acquisition; no addenda are attached.
This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation.
Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to the email address in the posting.
Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (8)
- Download
14. Amendment 0003.pdf
442 KBAdded in Combined Synopsis/Solicitation version 4Posted - Download
14. Amendment 0002.pdf
446 KBAdded in Combined Synopsis/Solicitation version 3Posted - Download
14. Amendment.pdf
446 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
7. DI-MGMT-80995A.pdf
231 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
7. DI-MGMT-80277.pdf
390 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
7. CDRL A002 (Service Report) -DRAFT.pdf
55 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
7. CDRL A001 (Maintenance Schedule) -DRAFT.pdf
55 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
N6426725Q4209 RFQ.pdf
433 KBAdded in Combined Synopsis/Solicitation version 1Posted
Lifecycle
- 1Version 1Combined Synopsis/SolicitationArchived
Camp Pendleton Generator Maintenance
- 2Version 2Combined Synopsis/SolicitationArchived
Camp Pendleton Generator Maintenance
- 3Version 3Combined Synopsis/SolicitationArchived
Camp Pendleton Generator Maintenance
- 4Version 4Combined Synopsis/SolicitationArchived
Camp Pendleton Generator Maintenance
- 6Version 6Combined Synopsis/SolicitationArchivedCurrent
Camp Pendleton Generator Maintenance
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Commander Fleet Readiness Center (COMFRC) hereby gives notice of their intent to award a purchase order to Campbell Grinder Co., 1226 E. Pontaluna Rd, Spring Lake, MI 49456 (Cage Code: 18278) on a sole source basis. In accordance with the Federal Acquisition Regulation (FAR) 13.106-1(b)(2), only one source is reasonably available, and no other supplies or services will satisfy agency requirements. FRC South West, NAS North Island has a requirement for necessary supplies and services to perform annual preventative maintenance (PM), evaluation, and repair for three (3) Government owned Campbell VTG Computer Numeric Control (CNC) grinding machines located at the Fleet Readiness Center Southwest (FRCSW). Campbell Grinder Co. does not authorize third-party field technicians and handles all maintenance, parts, and repairs entirely in-house. They deploy their own certified Local and Regional Service Technicians with proprietary knowledge directly to facilities for on-site PM, alignments, diagnostics, and repairs. Any government requirement for certified OEM maintenance or proprietary parts installation typically establishes a strong justification for a Sole Source Determination under FAR Part 13.5 or FAR 6.302-1 (Only One Responsible Source). For this reason, the Government intends to procure this PM, evaluation, and repair on a sole source basis from Campbell Grinder Co. (Cage: 18278). THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE QUOTES. However, all responsible sources may submit a capability statement, which, if received within three (3) calendar days after the date of the publication of this synopsis, will be considered. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement without impacting the requirement. A determination by the Government not to compete this requirement based upon responses received as a result of this notice is solely within the discretion of the Government. The point of contact for this requirement is kelsey.l.herbert2.civ@us.navy.mil | - | Special Notice | 11/17/2026 |
NOTICE OF INTENT TO SOLE SOURCE / COMBINED SYNOPSIS-SOLICITATION. Date: 10/1/2026 Requirement Title: HPAC Maintenance Renewal at Portsmouth Naval Shipyard Detachment San Diego (PNSDETSD) Solicitation Number: N3904026Q4993 Response Deadline: 10/6/2026 at 5:00 PM EST Contracts POC: Lisa Fielding, lisa.a.fielding.civ@us.navy.mil GENERAL INFORMATION: 1. This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. This combined synopsis/solicitation SHALL be posted on SAM.gov. 2. This solicitation documents and incorporates provisions and clauses of the Federal Acquisition Regulation (FAR) and the Defense Federal Acquisition Regulation Supplement (DFARS) that are in effect on the date of this solicitation's issuance. It is the contractor's responsibility to be familiar with the applicable provisions and clauses. The authoritative sources for the most current regulations are: • FAR: The official FAR website, which reflects the ongoing "Revolutionary FAR Overhaul" (RFO): https://www.acquisition.gov/far-overhaul • DFARS: The official DoD Class Deviations website, which contains the most recent updates to the DFARS: https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html 3. This solicitation is being issued as a: Request for Quotation (RFQ) 4. This acquisition is: Sole Source to American Compressor Company (ACC) 5. North American Industry Classification System Code (NAICS): NAICS 811310 6. The size standard is: $12.5 in Millions of Dollars. REQUIREMENT INFORMATION: Portsmouth Naval Shipyard requests a quote to provide the following: Renewal of HPAC maintenance services on three (3), Universal HIGHPACK Model 55H75 five stage air cooled, oil lubricated, reciprocating compressors at Portsmouth Naval Shipyard Detachment San Diego (PNSDETSD. The HPAC maintenance will require four separate intervals for service. These intervals are every 500 hours (or, semi-annual), every 1200 hours (or, annual), and every 3000 hours (or every two years) and every 6000 hours (or every 4 years). In addition to the scheduled preventative and corrective maintenance, the Contractor shall provide over and above repair services if it is identified that current issues with equipment exist that impact the equipment receiving maintenance. See Attachment 4 HPAC Maintenance Schedule for the maintenance intervals by year and by the equipment listed in accordance with the Statement of Work. Period of Performance: Date of award – 1 year with four (4) 1 year Option periods Attachment 1: Statement of Work Attachment 2: Sole Source Justification Attachment 3: Wage Determination San Diego Attachment 4: HPAC maintenance Schedule Attachment 5: HEC CCCD Attachment 6: OPSEC redacted Exhibits: Exhibit A CDRLs 001-002 Exhibit B CDRLs 001-002 Exhibit C CDRLs 001-002 Exhibit D CDRLs 001-002 Exhibit E CDRLs 001-002 METHOD OF QUOTE SUBMISSION: Offer shall be emailed to the Contracts POC Lisa Fielding, lisa.a.fielding.civ@us.navy.mil System for Award Management (SAM): Vendor must be registered in the SAM database to be considered for award. Registration is free and can be completed on-line at http://www.sam.gov/. Validity: The quote must remain valid for a minimum of 30 calendar days. Technical Requirements: Since this is a sole-source procurement to the OEM, the technical quote is simplified. The Offeror shall provide a brief capability confirmation stating that factory-certified technicians will perform the services and that OEM proprietary replacement parts will be used Price Reasonableness: The proposed price will be evaluated for reasonableness by comparing the contractor's total quote against the Independent Government Cost Estimate (IGCE) and historical prices paid by both government and commercial entities for the same or similar services, ensuring the best value to the Navy. Contractor Responsibility: The contractor must be determined responsible in accordance with FAR Part 9 (active SAM.gov registration, no active debarments, and satisfactory past performance). Over and Above Work CLINs have a "Not to Exceed" (NTE) funding limit of $10,000.00. All quotes shall include the Request For Quote (RFQ) completed in its entirety. Please fill in all yellow highlighted blocks in form and provide signature | - | Combined Synopsis | 10/06/2026 |
| - | Awarded | Open | |
The Naval Air Warfare Center, Weapons Division at China Lake, CA intends to procure on an other than full and open competition basis the following: Malvern Diffractometer Maintenance Agreement w/ options for 5 years (Qty 1 LOT). This is Manufacture sole source to Malvern Panalytical, Inc, with competition among authorized distributors. Complete details will be available in the solicitation. The solicitation or Request for Quote (RFQ) will be posted on the Contract Opportunities website at http://sam.gov/ on or about 11/10/2026. Please respond to Yvonne Stockwell by email at yvonne.c.stockwell.civ@us.navy.mil. All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/. Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information within Contract Opportunities. See the DLIS website for registration details: https://public.logisticsinformationservice.dla.mil/jcp/search.aspx Going forward, all new entities registering in GSA's System for Award Management (SAM), as well as existing registrations being updated or renewed, will require the submission of an original, signed notarized letter identifying the authorized Entity Administrator for the entity associated with the Data Universal Numbering System (DUNS) number. Effective June 11, 2018, entities who create or update their registration in SAM.gov to apply only for federal assistance opportunities such as grants, loans, and other financial assistance programs, have a notarized letter on file within 30 days of registration. Additionally, Effective June 29, 2018, all non-Federal entities who create or update their registration in SAM.gov, have a notarized letter on file within 30 days of registration. It is recommended that all interested parties be aware that processing this additional information may take several days and are proactive in maintaining the SAM registrations in an "Active" status as the government cannot award to an entity without an "Active" SAM registration. More information can be found at www.gsa.gov/samupdate. | - | Combined Synopsis | 11/19/2026 |
This is a combined synopsis/solicitation for commercial products and commercial services. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This enclosure is an addendum to FAR provision 52.212-1, Instructions to Offerors Commercial Products and Commercial Services, which applies to this acquisition. Competitive quotes are being requested under Request for Quote (RFQ) Number N66001-27-Q-6004. The North American Industry Classification System (NAICS) code applicable to this acquisition is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance and the small business size standard is $12.5 Million. This procurement is not a Set-Aside. Quotes submitted by Small Business and Large Businesses will be accepted by the Government. | - | Combined Synopsis | 11/18/2026 |
Additional Details
Solicitation Number
N6426725Q4209
Archive Date
Oct 11, 2025
Office Address
NORCO, CA, 92860