GovChime
Notice ID: e89e9b9e45664bce9c52d4bed81018c0SolicitationArchived

ISMUG Yearly Meeting

Archived on March 19, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM PST
Posted
March 2, 2026
Notice type
Solicitation
Set-aside
No Set aside used
NAICS
NAICS 51 Information (reported as 510000)
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVSEA.NAVSEA WARFARE CENTER.NAVAL SURFACE WARFARE CENTER
Place of performance
California, 90815
Last updated
Nov 3, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
N6426726Q4020
Notice ID
e89e9b9e45664bce9c52d4bed81018c0

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2025-06 October 1, 2025. The provisions at 52.212-1, 52.212-3 and the clauses at 52.212-4, 52.212-5 apply to this acquisition; no addenda are attached.

The Naval Surface Warfare Center (NSWC) Corona Division intends to use other than full and open competition to award a sole source Firm Fixed Price (FFP) contract to Long Beach Marriott. This is an all-or-none requirement and partial quotes will be deemed unresponsive and will not be evaluated. The Government will award on a single purchase order to the responsible Offeror whose offer conforms to the requirements as stated in the Solicitation and is most advantageous to the Government based on the criteria listed in section L and section M of the Solicitation.

Interested parties may identify their interest and capability to respond to the requirement, or by submitting capability statements. This notice of interest is not a request for competitive quotes. Offerors must be registered in SAM and all responsible sources may submit a quotation which, if timely received, will be considered by the Agency. Quotes are due no later than the response date in the posting. Responses/offers shall be submitted electronically, PDF or MS Word Format to email address in the posting.

Any amendment(s) issued to this Request for Quote (RFQ) will be published on this website. Therefore, it is the Offerors responsibility to visit this website frequently for updates on this procurement. No telephone requests.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • Wage Determination 2015-5613_N6426726Q4020.pdf

    443 KBAdded in Solicitation version 3Posted
    Download
  • Comb Synopsis_N6426726Q4020.pdf

    1.9 MBAdded in Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3SolicitationArchivedCurrent

    ISMUG Yearly Meeting

    Notice e89e9b9e45664bce9c52d4bed81018c0 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Review and fill out attached Sources Sought Notice document stating what software your company can provide. Email questions to amber.n.bruno.civ@us.navy.mil.
-Market Research11/04/2026
Pre-Solicitation Notice Notice of Intent to Sole Source USNS Mercy processes tissues onboard the ship for patients during deployment and 5-day activation if necessary. The equipment used to provide these services requires on-site preventive maintenance, calibration and repairs every twelve (12) months, these services are not available from Biomed resources within the command. Need: USNS Mercy (home port: Naval Base San Diego, CA) has a requirement for preventative maintenance (PM), calibration and repair services for a Leica Biosystems Histocore Peloris 3 equipment identified below: ECN Mfr. Serial No. Nomenclature Manufacturer Common Model 19994 45110917 TISSUE PROCESSOR LEICA BIOSYSTEMS INC HISTOCORE PELORIS 3 The contractor shall provide a trained Field Service Technician(s) who shall perform periodic preventive maintenance and calibrations for the equipment items and equipment requirements listed in this SOW under Appendix I. The contractor will provide labor, all supplies, and transportation for technicians to perform the services in accordance with (IAW) Original Equipment Manufacturer (OEM) specifications, Naval Medical Command P-5132- Equipment Management Manual (NAVMED-P5132), Local Command Instructions, and the Joint Commission Hospital Accreditation Program requirements. The Contractor shall allow only FULLY QUALIFIED FIELD ENGINEERS AND TECHNICIANS who have gone through OEM Training to perform services on the equipment listed under Appendix 1 of this SOW. Upon request, contractor shall provide training certificates prior to the start of any services to be performed. Training certificates and/or certifications will detail training location, training completion date, and training expiration dates. If any equipment and equipment requirements is found that is not on the supplied list in Appendix 1, Contracting Section must be notified. No work is to be performed on any unit not on the list without a cost estimate and approval in advance. The estimated period of performance (POP) will be for a Base year plus four Option Years. Initial period: 01 DEC 2026 – 30 NOV 2027 Option 1: 01 DEC 2027 – 30 NOV 2028 Option 2: 01 DEC 2028 – 30 NOV 2029 Option 3: 01 DEC 2029 – 30 NOV 2030 Option 4: 01 DEC 2030 – 30 NOV 2031 Place of Performance Work Location: Work will be performed onboard the USNS Mercy in the Directorate for Clinical Support Services (DCSS). Naval Base San Diego, CA 92136, Pier 1. The Contractor shall provide the following support: Calibration Provide on-site equipment calibration (including supplemental parts) as scheduled for the equipment listed on Appendix 1 of this SOW. Calibration shall be IAW the manufacturers’ OEM specifications or in 12-month intervals. This activity should be the procedure for mechanical and electronic adjustments required by the original manufacturer to ensure consistent, standardized performance or output. Preventive Maintenance The contractor shall provide preventive maintenance (including supplemental parts) as scheduled for the equipment listed in Appendix 1 of this SOW and should be IAW the manufactures specifications in 12-month intervals. Repairs Not Included. Items in appendix 1 of this SOW that require repairs to return the unit(s) to working condition per original manufacturer specifications that are not covered by the calibration/preventive maintenance process are required to be reviewed and approved by the Biomed Medical Repair Section point of contact this email address: MedRepair@mercy.navy.mil. The Biomed department will either create a new purchase order for the repair(s), or have the repair done at a later date. No repair work should be performed without a separate purchase order approved from USNS Mercy Biomed Department. Repair Parts Once separate purchase order for repair has been approved by USNS Mercy Biomed Department, the contractor shall provide all necessary parts to perform the repairs on the equipment listed in Appendix 1. Any additional costs associated for repair parts will be submitted in written form and emailed to this email address: MedRepair@mercy.navy.mil with description to be approved by the Biomed Medical Repair Section point of contact before initiation. The contractor shall ensure that the original design and functional capabilities will not be changed, modified, or altered unless authorized in writing by the manufacturer and the Biomedical Repair Division. If any action requires a contractual change to cover expenses, only the contracting Officer can authorize this change. Any contractual change will be issued in the form of a modification to the contract. Field Service Reports (FSR) The contractor shall develop and submit to the government an itemized list of all preventive maintenance work, calibration certification and repair work upon completion of the service. Reports shall be submitted to this email address: MedRepair@mercy.navy.mil This notice of intent is not a request for competitive proposals. Sources interested in responding to this notice are required to submit a capability statement that includes management and technical data and price information, in sufficient detail with convincing evidence that clearly demonstrates the capability to perform the required work. Capability statements shall not exceed five (8.5 x 11 inch) pages using a font size no smaller than 10-point. All capability statements received by the due date of this notice will be considered by the Government. A request for documentation or additional information will not be considered as an affirmative response or acceptance of the capability statement. A determination by the Government not to compete based on responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement or to proceed with a sole source contract. Capability statements should also include the business size and cage code. Capability statements are due by 2:00 PM Local Time, 19 November 2026. Capability statements shall be submitted by e-mail ONLY as a Microsoft Word or Adobe PDF attachment to the following address: curtis.e.cardoza.civ@us.navy.mil.
-Special Notice11/19/2026
See Attached Sources Sought Notice N32205-SS-N321-27-015 is hereby amended. Please see attached amendment 0001.
-Market Research11/16/2026
The Naval Air Systems Command (NAVAIR), Patuxent River, MD intends to issue a modification to the existing Sustaining Engineering and Support (SES) IV Contract, N0001924C0005, on a sole source basis to Northrop Grumman Systems Corporation (NGSC). The anticipated contract modification is for incorporation of highly specialized sustainment support of the Triton MQ-4C Unmanned Aircraft Systems (UAS) unique to the Royal Australian Air Force (RAAF). Efforts will include, but not be limited to, generation of RAAF unique engineering test procedures, RAAF unique network configuration documentation, and RAAF unique engineering and technical reports, informed by currently performed sustainment activities. This contract modification is being pursued on a sole source basis under the statutory authority of 10 U.S.C. 3204 (a)(l) as implemented by Federal Acquisition Regulation (FAR) Subpart 6.103-1, "Only One Responsible Source and No Other Type of Supplies or Services will Satisfy Agency Requirements." NGSC is the sole designer, developer, manufacturer, integrator, and producer of the MQ-4C Triton air vehicles and ground stations. Therefore, NGSC is the only source with the requisite knowledge of the Triton design, operation, and maintenance to successfully provide the necessary FSRs, engineering, systems integration, and sustainment support. Unless otherwise stated herein, no formal request for proposal or additional written information is currently available. A determination by the Government not to compete is solely within the discretion of the Government. IMPORTANT ADDITIONAL INFORMATION FOR INTERESTED PARTIES: This synopsis is published for information purposes only. (THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS). All responsible sources may submit a capability statement, which will be considered by the agency. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Companies interested in subcontracting opportunities should contact Northrop Grumman Systems Corporation – Aerospace Systems, attention: Vicky Harper-Hall, Socio-Economic Programs Sector Manager, email: vicky.harper-hall@ngc.com or phone: (310) 331-3824. There are no commitments by the Government to issue any solicitations, make an award, or to be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone inquiries will be accepted.
-Pre-Solicitation11/25/2026
DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. ALL LARGE AND SMALL BUSINESSES THAT ARE INTERESTED SHOULD SUBMIT A CAPABILITY STATEMENT. THE RESULTS OF THIS SOURCES SOUGHT WILL BE UTILIZED TO DETERMINE IF ANY SMALL BUSINESS SET-ASIDE OPPORTUNITIES EXIST. ALL SMALL BUSINESS SET-ASIDE CATEGORIES WILL BE CONSIDERED. OTHERWISE, THIS MARKET RESEARCH IS BEING USED TO IDENTIFY POTENTIAL AND ELIGIBLE FIRMS, OF ALL SIZES, PRIOR TO DETERMINING THE COMPETITIVE METHOD OF ACQUISITION AND ISSUANCE OF A SOLICITATION. Be advised that it is the responsibility of the potential Offerors to maintain access to the website for obtaining updated documentation and the latest information regarding this procurement and potential solicitation release. No phone calls or emails requesting status of the RFP will be accepted prior to its release. All interested parties must monitor SAM.gov. All data received in response to this sources sought, marked or designated as corporate or proprietary, will be fully protected from release outside the Government. Information and materials submitted in response to this request SHALL NOT be returned. Classified material SHALL NOT be submitted. Offerors are advised that the Government will not pay for any information or administrative costs incurred in response to this sources sought. This notice serves as a market research tool conducted in accordance with Federal Acquisition Regulations (FAR) Part 10 to assess potential Offerors and their technical capabilities. The findings from this market research will assist in determining the appropriate procurement strategy. Offerors who believe they possess the capability to provide the required product and can meet the requirements as a prime contractor or as a joint venture are invited to respond to this notice. PLACE OF PERFORMANCE Location: FRCSW North Island, CA ANTICIPATED CONTRACT TYPE The Government is anticipating this effort to be a single award Firm Fixed Price (FFP) contract with FFP CLINs. The intended delivery date will be for 365 days after contract award (ACA). ELIGIBILITY The applicable NAICS Code for this requirement is 334517 Irradiation Apparatus Manufacturing with a Small Business Size Standard of 1,200. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. The Product Service Code (PSC) for this effort will be 6635 Physical Properties Testing & Inspection Equipment. REQUIREMENTS INFORMATION The Naval Air Systems Command (NAVAIR), Commander, Fleet Readiness Centers (COMFRC), Patuxent River, Maryland intends to procure a Computed Tomography (CT) X-Ray Cabinet. The Contractor shall provide complete installation of all new equipment, training personnel, rigging, quality assurance, and necessary equipment to provide a turn-key system at FRCSW North Island, CA. The contractor shall provide and install a complete CT system in the designated space as shown in the courtesy Layout Drawing. It is the responsibility of the contractor to get the entire unit or assembled components to the prescribed space and meet all requirements listed in the DRAFT Statement of Work (SOW). Please review the DRAFT SOW and DRAFT DD 1423s for the requirements. The procurement is a Commercially-Off-The-Shelf (COTS) product with the inclusion of Federal Contract Information (FCI), therefore it may be CMMC Exempt. Companies that are capable of meeting this requirement are encouraged to respond. Interested offerors shall demonstrate the capability to meet the Government’s required timeline. Offerors shall have a Capability Maturity Model Certification (CMMC) Level 1 (Self) in accordance with DFARS 252.204-7021. The Contractor shall meet all requirements at FAR 52.240-93 Basic Safeguarding of Covered Information Systems. Offerors that are capable of meeting this requirement and can maintain this capability throughout the duration of the effort being solicited, are encouraged to respond. SUBMITTAL INFORMATION (CAPABILITIES STATEMENT) All submissions shall include the Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, Declaration as to whether a U.S. or foreign company and Points of Contact (POC), including names, phone numbers, and email addresses. Capability statement packages should demonstrate the ability to perform the services listed in the attached DRAFT SOW and DRAFT DD 1423s. The Government may elect not to discuss submissions received in response to this Source Sought with individual responders. There is no requirement to respond to the Sources Sought to be eligible for this procurement. However, the Government places tremendous value on the information received and may utilize it to finalize its acquisition strategy. Respondents shall fully use this opportunity to describe proven capabilities in performing the requirement as described in the Draft SOW. Documentation must address, at a minimum, the following: Reference to the Notice ID number N68520-27-RFPREQ-KN00000-0078 and the title of the DRAFT SOW and DRAFT DD1423s being referenced; Offerors profile to include number of employees, annual revenue history, office location(s), DUNS number, and a statement regarding current small/large business status; Must indicate whether the Offeror is a large business or qualify as a Small Business (SB), Small Disadvantaged Business (SDB), Women-Owned Small Business (WOSB), HUBZone Small Business (HUBZone), Veteran-Owned Small Business (VOSB), or Service-Disabled Veteran Owned Small Business (SDVOSB) Concern; Proof of current and valid CMMC Level 1 (self-assessment) certification. The certification will not count towards the total page count. Prior/current corporate experience performing efforts of similar size and scope within the last three (3) years, including contract number, organization supported, indication of whether as a prime or subcontractor, contract values, Government point of contact with current telephone number, and a brief description of how the referenced contract relates to the services described herein; Include in your response your ability to meet the requirements in the Facility and Safeguarding requirements; As applicable, if the Offeror can only perform parts of the DRAFT SOW and not all parts, please specify which portions of the DRAFT SOW the Offeror can and cannot perform. If the Offeror will be teaming or utilizing subcontractors, please include information regarding which work the subcontractor will be responsible for and how the prime will determine a subcontractor is capable of accomplishing the work; and Any other specific and pertinent information as pertains to this requirement that would enhance the Government’s consideration and evaluation of the information submitted. Vendors should appropriately mark any data that is proprietary or has restricted data rights. Interested Offerors shall submit capability statements (no more than 15 pages in length, single spaced, Times New Roman 11-point font) electronically in Microsoft Word or Portable Document Format (PDF) to the Contract Specialist, Kelsey Herbert at kelsey.l.herbert2.civ@us.navy.mil and the Contracting Officer, Amanda Taylor at amanda.j.taylor80.civ@us.navy.mil, no later than 5:00 PM Eastern Standard Time (EST) on 25 November 2026. If a DOD SAFE link is required for an Offeror to submit their capability statement, the Offeror must request via email to the Contract Specialist and the Contracting Officer, seven (7) business days prior to the closing of this notice. Late requests will not be accepted. When the Contract Specialist generates a DOD SAFE drop-off request for the Offeror, you will receive an email with a link to submit your drop-off. This link is good for a one-time submission; ensure that the submission is sent to both the Contract Specialist and the Contracting Officer. All questions or inquiries regarding this notice must be directed to the Contract Specialist and the Contracting Officer. Any questions regarding the Government documents must be submitted utilizing the questionnaire attachment within this sources sought notice. No phone calls will be accepted.
-Market Research11/25/2026

Additional Details

Solicitation Number

N6426726Q4020

Archive Date

Mar 19, 2026

Office Address

NORCO, CA, 92860