Notice ID: 68bb730c3446c1a60b7bf00e43411373Award NoticeAwarded
Mobile Decontamination Trailers
Awarded on July 20, 2018. Full description on SAM.gov.
Awarded tounder N6470918C0005 (source: SAM.gov award notice)• $203.9K
Overview
- Posted
- August 29, 2018
- Notice type
- Award Notice
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- STRATEGIC SYSTEMS PROGRAMS
- Place of performance
- 1150 USS Los Angeles Avenue, Kings Bay, GA, 31547
- PSC
- 42: FIRE/RESCUE/SAFETY; ENVIRO PROTECT
- Last updated
- Jan 23, 2026
- Award date
- Jul 20, 2018
- Award amount (SAM.gov award notice)
- $203.9K
Identifiers
- Solicitation number
- N6470918R0005
- Notice ID
- 68bb730c3446c1a60b7bf00e43411373
- Award number (PIID)
- N6470918C0005
Description
This is a combined Synopsis / Solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested and a written solicitation will not be issued. The solicitation number is N6470918R0005; this solicitation is a request for quotation (RFQ). This notice is Unrestricted. The North American Industry Classification System (NAICS) code is 336214. The Federal Supply Class (FSC) is 4240. Strategic Weapons Facility, Atlantic (SWFLANT), Naval Submarine Base Kings Bay, Georgia, has a requirement for two (2) Mobile Decontamination Trailers. Specifications: Each Mobile Decontamination Trailer to be Department of Transportation (DOT) approved, approximately 8.5' x 26'-30' tandem or tripleaxle enclosed aluminum trailer to function as a mobile decontamination unit. Each trailer will be of a towable weight when the water tank and waste water tank is full and an additional 1500lbs of essential gear is loaded. Each trailer will have electric brakes with a standard 7-pin hookup. The trailers will contain a clean room (front of the trailer), dirty room (back of the trailer), and a shower room with two showers (between the clean and dirty room). The dirty room will be approximately 50% larger than the clean room in size. Both showers will be designed for one person at a time. Each trailer will have a door located in the rear of the trailer (dirty room) which will serve as a personnel entrance, a door located in the front of the trailer (clean room) which will serve as a personnel exit, and the storage room will have an exterior entrance. Each trailer will be designed to flow personnel from the back of the trailer, into the dirty room, thru the shower room, and finally ending up in the clean room and subsequently exiting the trailer. All items installed in/on the trailers will be in accordance with applicable specifications listed below. Additionally, the viability and quality of materials used will be a factor during selection, as will the general layout, design, and use of space. NOTE: SWFLANT will inspect each trailer during the construction/build process and prior to final delivery in order to ensure all requirements are and delivered. EXTERIOR ITEMS Awnings Full retractable awnings, designed to protect from sun and rain, on the sides and back of the trailer. Constructed of a material that is light-weight, and has longevity. The retractable awning will be deployed by a switch, not manually. Flood Lights Exterior LED flood lights which fully illuminate the entire area around the trailer both above and under the awnings. Driving Lights Trailer will be equipped with adequate tail lights, brake lights, and marker lights for its respective size and will be in accordance with all applicable DOT regulations. Side marker lights must be included. Generator Sufficient capacity diesel power generator to run all onboard equipment simultaneously + 50%. Generator will have transfer switch and generator power cord. Trailer will also be equipped to accept a backup generator and/or shore power and include a 30' cord specifically designed for generator style plugs. Generator will be located in such a manner which allows for use of routine maintenance, repairs, and/or removal, such as a "slide out" feature. Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Rated KW/hr output will be a factor. Door Lighting Standard LED lights located overhead of all exterior entrance doors that fully illuminate all door areas. Outlets 110V GFCI outlets with protective weather covers (2 per side, 8 total). Install 110V on an independent breaker for use of portable heaters if necessary. Entrance/Exit Doors One (1) door located in the rear of the trailer (dirty room), which will serve as a personnel entrance, and one (1) door located in the front of the trailer (clean room), which will serve as an exit for personnel. Each door will be safely accessible consistent with the height of the trailer. The storage room will also have an exterior entrance. All exterior doors will have locks and share a common key. "RV" type steps plus a grab rail may be sufficient depending on the height of the trailer. Manual fold up style steps and handrails are preferred in lieu of automatic mechanisms. Lightweight materials will be used for this. Roof Mounted A/C with Heat Strip Sufficient roof mounted air conditioning (A/C) unit (s) with heat strip. Unit must be mounted on the "Clean Room" side of the trailer and CANNOT regenerate any air from the dirty room. Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Piping Freeze protection on all piping exposed to weather elements. Include standard 110V plug in order to utilize while trailer is not in use. Level Indicators Install visual level indicators/gauges on all four exterior sides of the trailer to ensure proper leveling. Tongue Jack The tongue jack shall be of an adequate capacity for the weight of the tongue. Prefer tongue jack which is electrically operated OR requires less force for operation in order to minimize ergonomic/repetitive injury concerns. Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Tongue Specs Able to be towed with a 1-ton truck, class IV/V Reese style hitch with a 2 5/16" ball. Lightweight materials, such as aluminum, will be used throughout the construction when possible to minimize tongue weight and final tow weight. INTERIOR (ENTIRE TRAILER) Smooth Flooring Smooth, non-carpeted, flooring will be throughout the interior of the trailer to facilitate ease of cleaning. Lighting Adequate LED ceiling lighting throughout the trailer, including the showers, that will fully illuminate the interior. GFCI Outlets 110V GFCI outlets. 6 per room in clean and dirty rooms (2 per wall) and 2 in storage room. Outlets will be on separate breakers to eliminate circuit overload. Dehumidifier Dehumidifier which will include an 110V standard plug in order to facilitate operation while the trailer is not in use. Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. INTERIOR (CLEAN ROOM) Bench Seating Two (2) fold down, aluminum benches, each measuring 6 feet in length. Wall of Cabinets Upper and lower cabinets with latches and locks. Lower cabinets will be a minimum of 28" depth with a countertop and upper cabinets will be 18" in depth. Overall, this setup will have 6 doors and 3 drawers. Cabinets will be made of a material which is easy to maintain and clean, and is lightweight, such as ABS plastic or aluminum. Fold-Down Table 2' x 4' wall mounted fold-down table, construction of a lightweight material. Floor Drain Floor drain centrally located in the middle of the room. Water will drain to the greywater tank. INTERIOR (STORAGE ROOM) Fresh Water System/Tank Freshwater system with pump and 400 gallon holding tank. Tank must be refillable via external 2 1/2 inch hose and standard garden hose fitting (trailer must be towable with full water tank). Tank can be placed under the trailer to assist with weight distribution. Water level indicator to be placed in Clean Room. Waste Water System/Tank Wastewater pump system with 400 gallon holding tank. Tank must be disposable using an external valve/garden hose adaptor (trailer must be towable with full waste water tank). Tank must have a pump included. Tank can be placed under trailer in order to assist with weight distribution. Water level indicator to be placed in Clean Room. Water Heater Tankless electric water heater, water flow 3-4 gallons per minute. Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Space Management The storage room must have enough space to store items such as stacked traffic cones (20), and other miscellaneous items in addition to the water tanks and any other utility items. Overhead Cabinets If space allows, overhead cabinets will be placed in the storage room for additional stowage. INTERIOR (SHOWER ROOM) Shower Stalls Two shower stalls will be setup for "One-Person at a time" use and will contain sloped floor pans to facilitate draining; will have a 6 inch lip to prevent spillover into the main shower room. Include access doors for ease of maintenance on piping. Space Between Showers There should be a minimum of 36" passageway between showers. Curtains Air lock curtains on each shower stall entrance (EXAMPLE: curtains that are held closed magnetically). INTERIOR (DIRTY ROOM) Negative Air System 700 Cubic Feet per Minute (CFM) ceiling mounted negative air system. System must be High Efficiency Particulate Arrestance (HEPA) filtered (10 micron). Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Bench Seating One fold down, aluminum bench measuring 6 feet in length. Wall Heater 1500 Watt electric wall heater. Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Drying Oven Will be intended for drying rather than cooking and will be approximately 20" (depth) x 35" (width). Manufacturer warranty will be considered for this requirement. Manufacturer reputation for quality and longevity will be a factor. Decibel output will be a factor. Floor Drain Floor drain centrally located in the middle of the room. Will drain to greywater tank. Sink Laundry-room style deep-sink will be located in the dirty room and will have a hot and cold water supply and will have an electric hands- free towel feeder. Wall of cabinets Minimum 6' wide 24" deep cabinets with countertop, drawers, and 18" upper cabinets. Cabinets will be made of a material which is easy to maintain and clean. Inspection/Acceptance: SWFLANT will reserve the right to inspect the trailers during the construction/build process and prior to final delivery in order to ensure all requirements are met and delivered. The trailers will also have at least a 1-year craftsmanship warranty which will cover any defective issues resulting from the design and/or construction of the trailers. Delivery Address: SWFLANT, 1150 USS Los Angeles Road, SWSSW Bldg. 6003, Kings Bay, GA 31547. Delivery within 60 days after acceptance of contract. FOB point - Destination. The following provisions and/or clauses apply to this acquisition. Offerors must comply with all instructions contained in: FAR 52.212-1 ADDENDUM: Instructions to Offerors - Commercial Items SWFLANT requests a Firm-Fixed-Price (FFP) quote by 03 April 2018 at 12:00 PM (EST) to provide the supplies described in this notice. The Government may consider late quotes. Contractors responding to this request must furnish a quote as described below. Quotes shall contain the following: 1. Drawing of the proposed trailers. 2. Price quote: Provide a FFP quote for all required supplies and/or services. Any costs related to credit card fees (see paragraph 6 below), delivery costs, and handling costs, as applicable, shall be included. 3. Travel Expenses. If travel is required in support of this requirement, the contractor shall include a detailed Basis of Estimate (BOE) that is priced in accordance with the Joint Federal Travel Regulations (JFTR). Each component of the proposed travel expense shall clearly identify the date(s), location(s), duration(s), quantity of personnel, and cost for the proposed travel. 4. Specifications: Provide all specifications for the products to be provided and a statement regarding whether or not the quoter is an authorized reseller of the products identified in the RFQ, if applicable. 5. Quote Cover Letter: Provide the name, title, telephone number, and e-mail address of the Company/division point of contact that can contractually obligate your company. Also, identify those individuals authorized to negotiate with the Government. Lastly, provide the company name, street address, and Data Universal Numbers System (DUNS) number. 6. Exceptions to the RFQ: Identify any exceptions taken with the RFQ content and the rationale for the exceptions to the RFQ, to include any terms or conditions applicable to payment by Government Commercial Purchase Card (GCPC), if GCPC is identified as the method of payment in the RFQ. NOTE: Exceptions to the RFQ may render the quote noncompliant and ineligible for award. 7. Government Commercial Purchase Card (GCPC) as Method of Payment. If the RFQ identifies use of the GCPC as the method of payment, all offerors shall discretely identify and include any associated charges in their quote and shall utilize Wide Area Work Flow (WAWF) as the mandatory method of invoice submittal and receiving report in accordance with DFARS 232.7002 & 232.7003. The proposal must demonstrate an understanding of and ability to meet all of the requirements set forth in the Specifications referenced herein. Throughout the proposal, the Offeror shall provide sufficient detail to substantiate the validity of all statements. The Offeror shall demonstrate that the Proposal complies with the requirements, terms, and conditions of the solicitation. General statements that the Offeror can or will comply with the requirements, that standard procedures will be used, that well known techniques will be used, or paraphrasing the solicitation's requirements in whole or in part, will NOT constitute compliance. Failure to conform to any of the requirements of the solicitation may form the basis for rejection of the Proposal. Brochures are not desired; clarity, completeness, and conciseness are essential and the overall quality of the proposal will be evaluated in the context of being representative of the Offeror's services. An Offeror's proposal is presumed to represent the best efforts to respond to the solicitation. Since only the proposal submitted in response to this solicitation will be evaluated, Offerors should make certain that their Proposal is complete with regard to the information provided. Data previously submitted, or presumed to be known, e.g., previous projects performed for the Government, will not be considered in the evaluation unless that information is physically contained in the Proposal. Offerors are advised that the Government may selectively verify any information provided in the proposal. Offerors are cautioned that they are responsible to ensure that material that they desire to have evaluated for a particular section is contained in that specific section. Proposals shall be e-mailed directly to spk12contracts@swflant.navy.mil, the sole designated e-mail address and inbox for submission and receipt of quotes or proposals. No other electronic means of submission, used in whole or in combination with e-mail, is permitted. E-mail quotes or proposals shall be in either Adobe or Microsoft Office format. Offerors are advised that the Government may be unable to receive other types of electronic files (e.g., .zip files) or files in excess of 20 megabytes. Unless offeror proposes a shorter period, by submission of an offer, the offeror agrees that its offer, including any timely revisions thereto, shall remain valid until the Government makes award under this solicitation. The foregoing does not preclude an offeror from withdrawing its offer prior to award. FAR 52.212-2 ADDENDUM: Evaluation- Commercial Items The Government shall issue a purchase order resulting from this RFQ to the responsible quoter whose quote, conforming to the RFQ, represents the following factors: 1. Quality 2. Warranty 3. Past Performance 4. Price The Government will use a comparative means of evaluating offers and select the Offeror whose aggregate proposal reflects the Best Value for the Government. Factors 1, 2, and 3, when combined are significantly more important than price. Therefore, the Government may award to a higher priced Offeror whose non-price factors reflect a superior level of technical expertise, experienced and highly qualified personnel, and positive past performance evaluations. The importance of price in the evaluation for award will increase as the degree of equality of non-price factors increases. Factor 1 - Quality The Government will evaluate each Offeror's proposal to determine the quality of the items the Offeror has proposed given the requirements identified in the specifications. The Government will give significant weight to the Offeror's proposed means of meeting the requirements, and higher-quality materials and construction methods can lead to a more favorable evaluation as a whole. Factor 2 - Warranty The Government will evaluate each Offeror's proposal to determine the length and scope of the warranty offered, as well as the ease of the Government making such a warranty claim. Warranties that are accessible can lead to a more favorable evaluation as a whole. Factor 3 - Past Performance The Government will use Past Performance submissions, including Attachment 1 and 2 and any PPPQs, to evaluate the ability of the Offeror to perform the proposed effort. Past Performance submissions will be used to determine the potential risk of non-performance, defective performance, and/or late performance by evaluating each Offeror's reported quality of work and relevant experience with the items being solicited. In evaluating past performance, the Government may contact some or all of the references provided by the Offeror and may contact other sources of information, including but not limited to: Federal, state, and local government agencies, and published media and electronic databases (i.e. Department of the Navy's Contractor Performance Assessment Reporting System (CPARS) and the Department of Defense's Past Performance Information Retrieval System (PPIRS), other customers known to the Government, consumer protection organizations, and others who may have useful and relevant information. The Government may evaluate past performance of the Offeror's proposed subcontractors, predecessor companies, or key personnel who have relevant experience to the extent warranted. Past performance information evaluated by the Government for the Offeror's performance as a prime Contractor and/or subcontractor, subcontractors, and the performance of their key personnel may include (but not be limited to) the following areas: relevancy, quality, cost control, schedule, business relationships, management of personnel, and customer satisfaction. Relevancy is determined based on the similarity of scope, magnitude, and complexity of the past performance submitted to the requirements requested. More recent and more relevant performance will have a greater positive impact on the past performance evaluation than a less recent or less relevant effort. Relevant performance at the subcontractor level will have a greater impact on the past performance evaluation than no record of relevant performance. Any Offeror with no record of relevant past performance will be given a "neutral" rating for past performance. Factor 4 - Price Inconsistencies between the data contained in the price proposal and the data contained in the proposal regarding the other factors may result in a lower overall evaluation of the total Proposal. Data submitted may be evaluated for price reasonableness. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced compared to estimates. Evaluation of options shall not obligate the Government to exercise the option(s). The proposed prices will be reviewed to determine whether they are materially unbalanced. An unbalanced offer will be determined to be unreasonably high or low and will not receive an award. Discussions The Government reserves the right to hold or not to hold discussions. Award will be made contingent upon the bilateral signature of the parties. The Government reserves the right to award on an all or none basis. CLAUSES INCORPORATED BY REFERENCE 52.203-3 Gratuities APR 1984 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper MAY 2011 52.204-7 System for Award Management OCT 2016 52.204-13 System for Award Management Maintenance OCT 2016 52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-17 Ownership or Control of Offeror JUL 2016 52.204-18 Commercial and Government Entity Code Maintenance JUL 2016 52.204-20 52.204-21 Predecessor of Offeror Basic Safeguarding of Covered Contractor Information Systems JUL 2016 JUN 2016 52.212-1 Instructions to Offerors--Commercial Items JAN 2017 52.212-2 Evaluation - Commercial Items OCT 2014 52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications. OCT 2015 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.243-1 Changes--Fixed Price AUG 1987 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Alt A System for Award Management Alternate A FEB 2014 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls OCT 2016 252.204-7011 Alternative Line Item Structure SEP 2011 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.204-7015 252.209-7004 Notice of Authorized Disclosure of Information for Litigation Support Subcontracting With Firms That Are Owned or Controlled By The Government of a Country that is a State Sponsor of Terrorism MAY 2016 OCT 2015 252.213.7000 252.215-7007 252.222-7007 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System- Statistical Reporting in Past Performance Evaluations Notice of Intent to Resolicit Representation Regarding Combating in Persons JUN 2015 JUN 2012 JAN 2015 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 252.225-7012 Buy American And Balance Of Payments Program-- Basic (Dec 2016) Preference For Certain Domestic Commodities DEC 2016 DEC 2016 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.232-7010 252.243-7002 Levies on Contract Payments Requests for Equitable Adjustment DEC 2006 DEC 2012 252.244-7000 Subcontracts for Commercial Items JUN 2013 252.247-7023 Transportation of Supplies by Sea APR 2014 CLAUSES INCORPORATED BY FULL TEXT 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JAN 2017) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at https://www.sam.gov/portal. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision. (a) Definitions. As used in this provision -- "Administrative merits determination" means certain notices or findings of labor law violations issued by an enforcement agency following an investigation. An administrative merits determination may be final or be subject to appeal or further review. To determine whether a particular notice or finding is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance. "Arbitral award or decision" means an arbitrator or arbitral panel determination that a labor law violation occurred, or that enjoined or restrained a violation of labor law. It includes an award or decision that is not final or is subject to being confirmed, modified, or vacated by a court, and includes an award or decision resulting from private or confidential proceedings. To determine whether a particular award or decision is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance. "Civil judgment" means- (1) In paragraph (h) of this provision: A judgment or finding of a civil offense by any court of competent jurisdiction. (2) In paragraph (s) of this provision: Any judgment or order entered by any Federal or State court in which the court determined that a labor law violation occurred, or enjoined or restrained a violation of labor law. It includes a judgment or order that is not final or is subject to appeal. To determine whether a particular judgment or order is covered by this definition, it is necessary to consult section II.B. in the DOL Guidance. "DOL Guidance" means the Department of Labor (DOL) Guidance entitled: ``Guidance for Executive Order 13673, `Fair Pay and Safe Workplaces' ''. The DOL Guidance, dated August 25, 2016, can be obtained from www.dol.gov/fairpayandsafeworkplaces. "Economically disadvantaged women-owned small business (EDWOSB) Concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Enforcement agency" means any agency granted authority to enforce the Federal labor laws. It includes the enforcement components of DOL (Wage and Hour Division, Office of Federal Contract Compliance Programs, and Occupational Safety and Health Administration), the Equal Employment Opportunity Commission, the Occupational Safety and Health Review Commission, and the National Labor Relations Board. It also means a State agency designated to administer an OSHA-approved State Plan, but only to the extent that the State agency is acting in its capacity as administrator of such plan. It does not include other Federal agencies which, in their capacity as contracting agencies, conduct investigations of potential labor law violations. The enforcement agencies associated with each labor law under E.O. 13673 are-- (1) Department of Labor Wage and Hour Division (WHD) for-- (i) The Fair Labor Standards Act; (ii) The Migrant and Seasonal Agricultural Worker Protection Act; (iii) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act; (iv) 41 U.S.C. chapter 67, formerly known as the Service Contract Act; (v) The Family and Medical Leave Act; and (vi) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors); (2) Department of Labor Occupational Safety and Health Administration (OSHA) for-- (i) The Occupational Safety and Health Act of 1970; and (ii) OSHA-approved State Plans; (3) Department of Labor Office of Federal Contract Compliance Programs (OFCCP) for-- (i) Section 503 of the Rehabilitation Act of 1973; (ii) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974; and (iii) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity); (4) National Labor Relations Board (NLRB) for the National Labor Relations Act; and (5) Equal Employment Opportunity Commission (EEOC) for-- (i) Title VII of the Civil Rights Act of 1964; (ii) The Americans with Disabilities Act of 1990; (iii) The Age Discrimination in Employment Act of 1967; and (iv) Section 6(d) of the Fair Labor Standards Act (Equal Pay Act). "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Labor compliance agreement" means an agreement entered into between a contractor or subcontractor and an enforcement agency to address appropriate remedial measures, compliance assistance, steps to resolve issues to increase compliance with the labor laws, or other related matters. "Labor laws" means the following labor laws and E.O.s: (1) The Fair Labor Standards Act. (2) The Occupational Safety and Health Act (OSHA) of 1970. (3) The Migrant and Seasonal Agricultural Worker Protection Act. (4) The National Labor Relations Act. (5) 40 U.S.C. chapter 31, subchapter IV, formerly known as the Davis-Bacon Act. (6) 41 U.S.C. chapter 67, formerly known as the Service Contract Act. (7) E.O. 11246 of September 24, 1965 (Equal Employment Opportunity). (8) Section 503 of the Rehabilitation Act of 1973. (9) The Vietnam Era Veterans' Readjustment Assistance Act of 1972 and the Vietnam Era Veterans' Readjustment Assistance Act of 1974. (10) The Family and Medical Leave Act. (11) Title VII of the Civil Rights Act of 1964. (12) The Americans with Disabilities Act of 1990. (13) The Age Discrimination in Employment Act of 1967. (14) E.O. 13658 of February 12, 2014 (Establishing a Minimum Wage for Contractors). (15) Equivalent State laws as defined in the DOL Guidance. (The only equivalent State laws implemented in the FAR are OSHA-approved State Plans, which can be found at www.osha.gov/dcsp/osp/approved_state_plans.html). "Labor law decision" means an administrative merits determination, arbitral award or decision, or civil judgment, which resulted from a violation of one or more of the laws listed in the definition of ``labor laws''. "Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except-- (1) PSC 5510, Lumber and Related Basic Wood Materials; (2) Product or Service Group (PSG) 87, Agricultural Supplies; (3) PSG 88, Live Animals; (4) PSG 89, Subsistence; (5) PSC 9410, Crude Grades of Plant Materials; (6) PSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) PSC 9610, Ores; (9) PSC 9620, Minerals, Natural and Synthetic; and (10) PSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor. "Restricted...
Award Overview
Award Number
N6470918C0005
Award Amount (SAM.gov award notice)
$203.9K
Award Date
Jul 20, 2018
Awardee
Awardee UEI
LYGRCYHJKXH8
Original Solicitation
Notice ID: 68bb730c3446c1a60b7bf00e43411373
Posted Date: Aug 29, 2018
Original Response Deadline: Not specified
Contacts
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Award Notice | DEPT OF THE NAVY | Aug 29, 2018 | - |
Lifecycle
Solicitation:
N6470918R0005- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisMar 19, 2018
Mobile Decontamination Trailers
- AwardedCurrentAug 29, 2018
Mobile Decontamination Trailers
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
N6470918R0005
Archive Date
Jul 16, 2019
Office Address
WASHINGTON NAVY YARD, DC, 20374-5127