GovChime
Notice ID: 54f684c53f024ebd9fe38c52ac6e600aSolicitation

P/N E119-GSE100, Portable Stairs

Archived on June 28, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:00 PM UTC−04:00
Posted
June 6, 2024
Notice type
Solicitation
NAICS
332323: Ornamental and Architectural Metal Work Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAIR WARFARE CTR AIRCRAFT DIV
Last updated
Sep 9, 2025

Identifiers

Solicitation number
N6833524R0186
Notice ID
54f684c53f024ebd9fe38c52ac6e600a

Description

Synopsis modification 06-June-2024: NAICS code updated to 332323:Ornamental and Architectural Metal Work Manufacturing The Naval Air Warfare Center Aircraft Division (NAWCAD) Lakehurst, NJ intends to solicit, negotiate, and award a sole-source contract with KG Manufacturing LLC (CAGE: 8L4X7) for P/N E119-GSE100, Portable Stairs, Towable, NSN 4920-01-615-6947 to be delivered to 5 Navy sites in support of the C-40 aircraft program. KG Manufacturing successfully passed validation/verification testing by the P-8 Test and Evaluation team and this P/N has been documented via the Automated SERD system as the Navy approved aircraft stairs for the P-8 and C-40 programs. As Original Equipment Manufacturer (OEM), KG Manufacturing has the proprietary rights to the technical data and drawings and is the only known source with the requisite knowledge of the design, fabrication, performance, and operational characteristics of the stairs. The Government intends to procure the above services under the statutory authority of Title 10 U.S.C. Section 2304(c)(1) as implemented by the Federal Acquisition Regulation (FAR) Section 6.302-1, only one responsible source. FAR 6.302-1(a)(2)(iii)(A) states services may be deemed to be available only from one responsible source when it is likely that award to any other source would result in a substantial duplication of cost to the Government that is not expected to be recovered through competition. THIS IS NOT A REQUEST FOR PROPOSAL. All responsible sources may submit a capability statement, proposal or quotation, which shall be considered by the agency. No contract will be awarded on the basis of offers received in response to this notice. All inquiries and concerns must be addressed to the procurement specialist, Ms. Sheila Battaglia at sheila.l.battaglia.civ@us.navy.mil. Responses to this notice must be submitted by 30 May 2024. A determination not to compete this requirement is within the discretion of the Government. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government in a future competition.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N6833524R0186
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 2×
    SolicitationCurrentMay 15, 2024

    P/N E119-GSE100, Portable Stairs

    Notice 54f684c53f024ebd9fe38c52ac6e600a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
5 Year IDIQ Basic Contract for MF. This requirement is to procure MF containers in accordance with Government drawing package NAVAIR 1339AS and all related Convention for Safe Container requirements. Please see the attached documents for additional information.
-Solicitation06/11/2026
AMENDMENT 0001 ***NOTE: Due to the begininning of a new FY, the solicitation number has changed from N6833526Q1183 to N6833527Q1040*** ***Amendment 0001 was posted 29 October 2026. Please see attached Amendment N683350-27-Q-1040-0001.*** END OF AMENDMENT 0001 The Naval Air Warfare Center Aircraft Division (NAWC-AD) is releasing Request for Quote (RFQ) N6833526Q1193 on a competitive basis for a Firm-Fixed-Price (FFP) contract to procure Peculiar Support Equipment (PSE), as detailed in the attached solicitation and associated documents. These PSE items are required to support the V-22 program. This solicitation is being issued as a 100% Small Business Set-Aside in accordance with FAR Part 19. Technical Data Package and Export Control Requirements: This solicitation includes DFARS 252.204-7025, Notice of Cybersecurity Maturity Model Certification (CMMC) Requirements. The technical data package contains Controlled Unclassified Information (CUI). Offerors must obtain access to the CUI drawing package to prepare a proposal. Proof of CMMC Level 2 (Self) Assessment certification is required to request access to the technical data package. Refer to Section A of the solicitation document for full instructions regarding CMMC. The Government owns the Build-to-Print Technical Drawing Package, which is considered Export Controlled. All Offerors must possess a current and certified DD Form 2345 (Militarily Critical Technical Data Agreement) to request access to the drawings. Drawings will be provided to the designated data custodian listed on the certified DD Form 2345 via the DoD SAFE website. Refer to Section A of the solicitation document for full instructions regarding DD Form 2345. Requesting Access to Solicitation Documents: To request access to the Government-provided documents associated with this solicitation, Offerors must submit the following via email: 1. Proof of current and valid CMMC Level 2 (Self-Assessment) certification. 2. A certified DD Form 2345. Requests should be sent to the Point of Contact (POC) listed below. Solicitation Number: N6833526Q1193 Point of Contact and Questions The Point of Contact (POC) for this solicitation is: Eric Glawson, eric.j.glawson.civ@us.navy.mil and Kelli Ryan, kelli.l.ryan3.civ@us.navy.mil. All questions and inquiries regarding this solicitation must be submitted via email and reference Solicitation Number: N6833526Q1193 , Solicitation Title: WIRING SYSTEM REPAIR SET FOR THE V-22 AIRCRAFT (FMS) . Offerors are encouraged to review the solicitation and attachments thoroughly before submitting questions or requests for access. This RFQ shall not be construed as obligating the Government to award a contract or authorizing work to commence and shall not serve as a basis for any future claims against the Government.
-Solicitation11/12/2026
SYNOPSIS: #N68335-26-Q-1184 Anchor Tiedown Weldment Naval Air Warfare Center Aircraft Division - Kuwait F/A-18 E-F Super Hornet Program The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with Vital Link, Inc. (CAGE: 0ZV99) for the Anchor Tiedown Weldment (Part Number: 602145-01) hardware components in support of the NAWCAD Kuwait F/A-18 E-F Super Hornet Program. This order will procure two (2) Anchor Tiedown Weldments. The Anchor Tiedown Weldment is used during maintenance of the F-414 engine inside the test cell. The vendor will build/fabricate and conduct a pull test of the Anchor Tiedown Weldment. Vital Link, Inc., as the Original Equipment Manufacturer of the Anchor Tiedown Weldment, is the only source with the requisite knowledge, technical experience, and production-level data to produce these components. The components being procured are integral to the maintaining the F-414 engine and are critical to maintaining operational readiness. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. PSC Code: 4920 – Aircraft Maintenance and Repair Shop Specialize Equipment NAICS Code: 332710 – Machine Shops - size standard 500
-Pre-Solicitation11/19/2026
This effort is for the production and delivery of High Lift Adapter ADU-954/E, Outriggers, P/N: 4097AS265-1 + ADU-952/E, Push Up Adapter, P/N: 4097AS200-1, and MHU-191 Munitions Loader, P/N: 3992AS100-1 for both USN and RAAF. In accordance with the attachments in this solicitation, the submitted proposal must be accompanied by all supporting data and facts used to develop the proposal that are accurate, current, and complete to allow Government evaluators to make their independent assessments. Written rationale is requested to define calculations and assumptions made when preparing the proposal. Please provide actuals and any other information that supports the proposed cost elements for each task, Basis of Estimate (BOE). The proposal should include all labor hours and rates proposed by labor category, as well as material, subcontractors, overhead and other direct costs that the Contractor expects to incur in this effort. A proposal received without sufficient supporting data and rationale, such as inadequate cost/pricing data, will delay the procurement award and/or will result in the proposal being rejected by the Procuring Contract Officer. The Contractor and any subcontractors must provide certified cost and pricing data in accordance with FAR 15.403-4 that meet or exceed the $10,000,000 threshold. In accordance with FAR 15.406-2, a Certificate of Current Cost or Pricing Data is required from the Contractor any subcontractors, certifying that the cost or pricing data submitted in support of the proposal are current, accurate, and complete. The Contractor shall complete and provide the checklist in accordance with DFARs 252.215-7009 identifying whether each of the criteria are met and provide a copy with the submission of the proposal. For major subcontracts over $10,000,000, please include a completed cost and pricing analysis in accordance with FAR 15.404-3(b). In the event that the Contractor or any of its subcontractors have non-complying existing deficiencies, the Government requests that these deficiencies be reported to the PCO as soon as they are known. **Instructions for submitting the DD2345 and details applicable to the evaluation criteria are included in the Buy Terms attached in this solicitation.** **Please submit all proposals no later than 23 November 2026 at 9 AM to Molly Jackson (molly.s.jackson.civ@us.navy.mil).*
-Solicitation11/23/2026
This Sources Sought notice is being posted to satisfy the requirements of Defense Federal Acquisition Regulation Supplement (DFARS) 206.302-170. The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole-source basis with EAA Tools, LLC (EEA), CAGE: 5LNR7, for the award of a contract. The designated contractor, EEA, shall provide to NAWCAD Lakehurst the manufacture and delivery of the Main Rotor Spindle Pry Bars (P/N SPB-60-RS, NSN 3040-01-722-4706) for the Royal Australian Navy (RAN); Danish Defense Acquisition and Logistics Organization (DALO); and the India Navy (IN) in support of the MH-60R program. The applicable North American Industry Classification System (NAICS) code for this requirement is 332216 (Saw Blade and Handtool Manufacturing). The Product Service Code (PSC) is 3040 (Miscellaneous Power Transmission Equipment). THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible small and large businesses, capable of fulfilling the requirements described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this Notice. EAA Tools, LLC. is the OEM, sole designer, developer and manufacturer of the Main Rotor Spindle Pry Bar. The Main Rotor Spindle Pry Bar securely attaches to spindle damper mount and provides required leverage and stability to manipulate main rotor spindle assembly on aircraft for various maintenance requirements to include access to spindle mounts bolts and pitch control rod removal/re-installation. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 3204(a)(1), "Only one responsible source and no other supplies or services will satisfy agency requirements" for this action. (THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS.) Responsible, interested parties, however, may identify their interest by submitting a capabilities statement. The Government will consider all information received prior to the closing date of this notice. A determination by the Government not to compete this procurement based upon responses to this notice is solely within the discretion of the Government. The Government will not pay for any responses received. There is no commitment by the Government to issue any solicitations, make an award or awards, or be responsible for any monies expended by any interested parties before award of a contract for the efforts mentioned above. Information provided herein is subject to change and in no way binds the Government to solicit for or award a contract. No telephone responses will be accepted.
-Market Research11/12/2026

Additional Details

Solicitation Number

N6833524R0186

Archive Date

Jun 28, 2024

Office Address

JOINT BASE MDL, NJ, 08733